Used Voran Elevator Sa Without Centrifugal Mill for sale (30,957)

Condition: new, Nominal rating up to 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Hedpfxsb I Sy Ss Ac Ijnt Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½" inside Connection for washing vessel 1½" outside Height fruit outlet 1750 mm

Condition: new, Elevator SA200 with centrifugal mill rotatable capacity up to 1 000 kg/h power: elevator 0,37 (0,5) kW (PS) mill 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 620 mm width 700 mm height 2 100 mm Hnedpfx Asb I Ucasc Ijt insertion resp. discharge height 800 mm weight 185 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 1 ½ “ outside mash discharge height 1 260 mm suitable for pomaceous and stone fruit, berries

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 10038241 / 147300000G M0009906E/07/00007, Voran inclined elevator SA 400 with RM 75 USED Hnjdpfxotqdnlj Ac Ist Subject to prior sale!

Condition: repair required (used), Year of construction: 2019, functionality: fully functional, In operational condition: MAXMILL NVM1166 - HISION VMU1100 - HISION V180 Hnodpfxsy Iyw Se Ac Ist

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Hedpfx Acjzxt Sne Iont Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: new, capacity up to 4 200 kg/h power 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 725 mm width 690 mm height 1 440 mm insertion resp. discharge height 1 440 mm weight 70 kg material 1.4301 / AISI 304 mash discharge height 470 mm suitable for pomaceous and stone fruit scope of delivery stand, 9 mm cutting screen Hnodjb I Sxkspfx Ac Ijt

Condition: new, capacity up to 1 000 kg/h power 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 550 mm width 520 mm height 1 145 mm height with stand 1 530 mm insertion resp. discharge height 1 530 mm weight (without / with stand) 45 / 60 kg material 1.4301 / AISI 304 Hnedpjb I Sw Iofx Ac Iot mash discharge height 660 mm suitable for pomaceous and stone fruit scope of delivery 9 mm cutting screen

Condition: new, capacity up to 650 kg/h power 1,5 (2,0) kW (PS) electric outlet 400V 50Hz (3 phases) Hodsb I Sw Aopfx Ac Ijnt fuse 16 A dimensions: length 500 mm width 420 mm height 890 mm height with stand 1 615 mm insertion resp. discharge height 1 615 mm weight (without / with stand) 25 / 40 kg material 1.4301 / AISI 304 mash discharge height 690 mm suitable for pomaceous and stone fruit scope of delivery 8 mm cutting screen

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Hnsdpfx Acoiz A Eze Ist Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: Hnsdpjv Hcwtofx Ac Ist – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Year of construction: 2026, condition: new, The fruit washer elevator mill is made from stainless steel. Firstly, the operator of the machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 3000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. Hedpfxoflpmkj Ac Iont - Powerful 4 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel and easy to clean after using.

Year of construction: 2026, condition: new, The fruit washer mill is made from stainless steel. Firstly, the operator of machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 1000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. It facilitates the process of pouring the products into the basin. Hnedpoflpfbofx Ac Ijt - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - The speed of the belt conveyor is adjustable in the control panel. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Machine is easy to clean after using. - Powerful 2.2 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel.

Condition: used, Used Eiger model 5L SSE EXD stainless steel bead mill. Stainless steel chamber measures approximately 360mm x 200mm diameter. Unit is driven by 10hp, 420volt, 3/50 electric motor. Includes local controls. Hnjdpjz Ah Skefx Ac Iot

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm Hodszuxn Tjpfx Ac Ijnt ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), VORAN EP1000 Industrial Pulper / Refiner – Stainless Steel VORAN EP1000 industrial pulper, designed for the separation, crushing, and refining of fruits and vegetables, allowing for the extraction of pulp or puree and the simultaneous separation of skins, seeds, pits, and other unwanted solid fractions, depending on the processed product and the installed screen. The product is continuously fed into the machine, where a rotating system drives it against a perforated sieve or screen. The usable fraction passes through the screen, while the solid residues are conveyed to a separate outlet. Its stainless steel construction and hygienic design make it particularly suitable for industrial lines for the production of juices, purees, pulps, and products derived from fruits and vegetables. MAIN FEATURES -Manufacturer: VORAN -Model: EP1000 -Type: Industrial pulper / refiner -Continuous processing system -Separation of pulp and solid residues -Rotating extraction / refining system -Internal sieve or screen -Continuous product feed -Separate outlets for product and residues -Construction mainly in stainless steel -Driven by an electric motor -Closed process chamber -Access for cleaning and maintenance -Hygienic design for the food industry -Integrable into fruit and vegetable processing lines PROCESS The pre-prepared product is introduced into the VORAN EP1000, where the rotating system conveys and presses it against the perforated surface of the screen. The pulp, puree, or liquid fraction passes through the perforations and is collected by a specific outlet, while the larger parts that do not pass through the screen are evacuated separately. This principle allows for the following operations: Extraction of pulp and puree Refining of product Separation of skins and seeds Separation of coarse fibers Removal of solid residues Preparation of product for subsequent processes APPLICATIONS Especially suitable for fruit and vegetable processors, manufacturers of juices, purees, pulps, jams, sauces, and preserves. Depending on the screen and configuration installed, it can process different fruits, berries, tomatoes, and vegetables, and can be part of extraction and pulp preparation lines. The VORAN EP1000 can be integrated with washers, mills, crushers, pumps, tanks, pasteurizers, refiners, and filling systems. Machine available for inspection. Hjdpfx Acjzxcp Ae Isnt Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2025, condition: new, Capacity up to 2000 kg/h Mill motor 3,0kW Elevator motor 0,37 kW Stepless speed regulation with frequency inverter Automatic start-stop-function for the elevator controled by 3 member sensor in the hopper from the following machine (press, mashpump,..) Stainless-steel construction on 4 wheels (2 tractable, 2 fixed roller) Dimensions: (lxwxh) 3100x675x2200mm weight: 230kg Hedpfe Hmtdex Ac Ient Fold-away sorting table integrated Central wastewaterdrain on the bottom (ø75mm)

Condition: used, 10’-0” x 84” HARDINGE CONICAL BALL MILLS MILL SPECIFICATION Model : 10’-0” x 84” HCBM Overall Dimensions : 3050 mm diameter x 5185 mm long. Installed Power : 400 kW Absorbed Power : 320 kW Mill Speed : 20 rpm Lining : Chrome Iron Cast Liner Plates Media : Steel Balls (30 tonne required) Drive : Girth Gear and Pinion, Gearbox and Slip Ring Motor Trunnion Bearings : No.1 Mill - Cooper Split Roller Bearings No.2 Mill – White Metal Bearings The mills were operated by British Chrome & Chemicals Ltd (later Elementis Chromium), at their site in Cleveland, UK, processing Chrome Ore to a fineness of 99% passing 45 µm. Hsdjzvgdljpfx Ac Ijnt The first mill, with the white metal bearings, was installed in around 1970. The second mill, with the Cooper Split Roller Bearings was installed in 1980. This mill is offered with a new set of Cooper Trunnion Bearings. Both mills were in operation until the site closed in 2009 and have been in storage ever since. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: used, HARDINGE Conical Ball Mill 6’-0” dia x 36” ball mill for the dry grinding of industrial minerals. Hnedpfx Aezvgvnec Iet Mill fitted with Manganese steel liners for operation will steel ball grinding media. White Metal Bearings on trunnions. 90 kW Motor fitted (could be reduced to 75 kW). Mill with countershaft drive but could be converted to gearbox.

Condition: new, Specifications: capacity 1 000 up to 3 000 kg/h power: elevator 0,55 kW mill 4/3,3 kW circulating pump 2,2 kW electric outlet 400V 50Hz (3 phases) fuse 32 A dimensions: length 3 540 mm width 935 mm height 2 585 mm insertion resp. discharge height 850 mm weight 350 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside mash discharge height 1 570 mm Hodjd Nq U Ropfx Ac Iont suitable for pomaceous and stone fruit, berries scope of delivery 7 mm, 9 mm und 12 mm cutting screen

Condition: good (used), Year of construction: 2003, functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,200 mm, total width: 2,000 mm, total length: 2,250 mm, type of input current: AC, rotational speed (max.): 3,150 rpm, rotational speed (min.): 63 rpm, table load: 250 kg, overall weight: 2,200 kg, input voltage: 400 V, space requirement height: 2,400 mm, input current: 8 A, input frequency: 50 Hz, Equipment: documentation/manual, Due to restructuring measures, we are selling our conventional milling machine – Intos FNGJ 40. - Year of manufacture: 2003 - Good condition for its age - Work table: 800(X) x 400(Y) mm - Travel ranges: X 600 x Y 400 x Z 400 mm Hedpfx Acez Afdds Ijnt - Spindle: 63 – 3,150 rpm - 4 kW via gearbox - Driven axes: X, Y, and Z (feed and rapid traverse) - 3-axis Heidenhain digital display - Stable machine with solid guides - Weight: 2.2 tons - Identical in design to EMCO (these were later manufactured at the Intos plant) - Fully functional - Various tool holders, vises, etc., can be purchased depending on the agreed price - Machine can be inspected while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made without any warranty. Collection only (EXW) – no shipping.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Hjdoq Nf U Eepfx Ac Ient Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Condition: used, Year of construction: 2011, EMCO Concept Mill CM 450 - 3-Axis CNC Milling Machine - Interchangeable WinNC control: Sinumerik 810/840 D / Heidenhain TNC 426/30 - Automatic tool changer - 20-position tool magazine with directional logic - Tool taper air blow-out device - Coolant system - Central lubrication system - Machine light - Operating manual - Operating time: approx. 24,660 hours - Year of manufacture: 2011 Technical data - Machine type: 3-axis CNC milling machine - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm - Distance spindle nose–table: 100–600 mm - Table size: 700 × 520 mm - T-slots: 5 × 18 mm, spacing 100 mm - Max. table load: 500 kg - Main spindle: 11 kW (S6–40 %) - Speed range: 50 – 12000 rpm Hodpfez Da Hasx Ac Ient - Max. torque: 83 Nm (S6–40 %) - Tool holder: SK40 / DIN 69871 - Tool magazine: 20 tools - Max. tool diameter: 80 mm with adjacent tool / 125 mm without - Max. tool length: 250 mm - Max. tool weight: 8 kg - Rapid traverse X/Y/Z: 24 m/min - Coolant pump: 2 bar / 40 l/min - Coolant tank: 160 l - Compressed air: min. 6 bar / approx. 150 l/min - Connected load: 16 kVA - Mains connection: 3 × 400 V / 35 A - Footprint (W x H x D): approx. 2040 × 2920 x 2445 mm - Weight: approx. 4000 kg

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Hsdpfx Aex D Tbmjc Isnt Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2020, condition: used, module 4 diameter 180 mm Bore diameter 40 mm width 67 mm 5 weight 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 Hsdpfxjz Dburj Ac Iont on request

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, The machine is unused! TECHNICAL DETAILS Rotor: Open rotor Grinding mechanism: 650 mm × 550 mm Application: Grinding of, for example, lumps MACHINE DETAILS Power: 22 kW Voltage: 380 V Frequency: 50 Hz Current consumption: 42.5 A Speed: 1,470 rpm Protection class: IP55 Insulation class: F Operating mode: S1 – Continuous operation Sound level: 71 dB(A) Weight: approx. 190 kg EQUIPMENT Hjdpozr Hziefx Ac Iont Control system Star/delta connection possible Spare parts can be supplied for an additional charge.