Used Weingarten N 63 for sale (54,592)

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm Hodjfx Hv Hepfx Am Ter clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: excellent (used), For sale: a Carl Beckwoldt CB 00-63 N/4D geared motor with a three-phase electric motor, 0.18 kW. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good, with normal signs of wear consistent with its use. The robust construction makes it suitable for driving conveyors, feeders, production machines, and other industrial equipment. Hodpfx Amoznww Ts Ter Technical specifications: Manufacturer: Carl Beckwoldt Type: CB 00-63 N/4D Motor power: 0.18 kW Power supply: 3× 220Δ / 380Y V Current: 1.06 / 0.61 A Frequency: 50 Hz Output speed: 39 rpm Protection rating: IP54 Insulation class: B Power factor: cos φ 0.75 Standard: VDE 0530 Country of manufacture: Germany

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication Hsdpfx Ask S Htxjm Ter - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Year of construction: 1967, condition: used, pressure 63 t throat 280 mm stroke 8-100 mm no. of strokes 56/84 Hub/min ram - range of adjustment 63 mm table surface area 620x500 mm ram surface 310x260 mm hole in the table Ø 250 mm table height 850 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t Hjdolp U Emopfx Am Tjr dimensions of the machine ca. 1200x1900x2800 mm

Year of construction: 1984, condition: used, pressure 63 t throat 320 mm stroke 8-100 mm no. of strokes 120 Hub/min ram - range of adjustment 63 mm table surface area 730x600 mm ram surface 540x360 mm table height 850 mm Hjdpfx Amjp Sycps Tsr tool hole in ram Ø40 mm weight of the machine ca. 5,5 t dimensions of the machine ca. BxTxH 2000x2000x3000 mm

Condition: defective spare-parts repository (used), Year of construction: 1974, machine/vehicle number: 121645, functionality: not functional, pressing force: 63 t, table width: 650 mm, table height: 910 mm, overall weight: 4,000 kg, space requirement height: 2,800 mm, space requirement length: 1,200 mm, space requirement width: 1,900 mm, stroke adjustment: 63 mm, The eccentric press has a clutch defect and is currently non-operational. Hsdpfx Aox D Tngsm Tsr Without the column stand mounted in the pictures.

Condition: used, Year of construction: 1974, functionality: fully functional, pressing force: 63 t, stroke length: 100 mm, ram adjustment: 63 mm, We offer this used Weingarten A 63 eccentric press, year of manufacture 1974, including punching tool. Pressing force: 63 t Strokes per minute: 120 Ram stroke: 8–100 mm Hjdpoyryt Tjfx Am Tsr Ram adjustment: 63 mm If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer: Cebeha, gear motor type CB SF 150-63 N/40 -Speed: 23 rpm -Engine: 0.18 kW / 1360 rpm -Hollow shaft: Ø 20 x 85 mm -Protection class: IP54 -Total dimensions: 260/250/170 mm Hodjt E D Elopfx Am Ter -Weight: 12.5 kg

Condition: used, functionality: fully functional, Condition: Used - Functionality: Fully functional - Compatible machine: CNC CMS AVANT - If interested, we offer overhaul service, contact us. Weight and dimensions for transport: 5 kg, 36x26x21 cm. Hedpfevu Akpsx Am Tsr

Condition: good (used), Year of construction: 2008, Manufacturer: EBG-TECH Type: BMW N-63 Hedpfx Amof Ecwzs Tor Year: 2008 Max. disk diameter: 300 mm Overall size: 1900 x 1200 x 2900 mm Weight: 1750 kg

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Hodpfxozqzd No Am Tjr

Year of construction: 2003, condition: used, machine/vehicle number: M00543, Rated force: 2,500 kN, rated power: 18.5 kW, machine weight: 25,000 kg, stroke rates in continuous operation: 19-57/min, max. stroke rates in single-stroke operation: 35/min, dwell time: 0.245 s, stroke length: 19-250 mm, max. installation space: approx. 480 mm, table size: approx. 900x1,200 mm, upstream light curtain, two-hand operation, separate control panel, control unit BEUTLER DATAPLUS 200. Hodpfx Amjzqzc So Tjr

Condition: used, Swing bending machine Type: Weingarten ALH Condition: Used Hsdpfx Amsy I U U Se Ter Technical Data Sheet thickness: 1.25 mm Bending length: approx. 2030 mm

Condition: new, Brand-new electric actuator from the renowned German company AUMA. Professional device designed for industrial automation, operation of sluice gates, valves, dampers, and industrial fittings. The actuator is in warehouse condition – unused. Equipped with a manual emergency handwheel and a robust industrial housing with a high IP67 protection rating. Drive nameplate data: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Comm. No.: 194452 • No.: 0402ND90010 • Protection rating: IP67 • Output speed: 45 rpm Hedpfx Amey Skm Ej Ter • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 • Operating temperature: -25°C to +60°C Motor nameplate data: • Motor type: AD0R 63-4/80 • Article No.: Z011.859 • No.: 0402NM31789 • Power supply: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Duty type: S4 – 25% ED 1200 c/h • Protection rating: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Applications: • Industrial automation • Industrial fittings • Sluice gates and dampers • Water supply installations • Power engineering • Technological systems Condition: new / warehouse The price is for one piece.

Condition: good (used), Year of construction: 1978, functionality: fully functional, power: 23 kW (31.27 HP), pressing force: 63 t, table width: 480 mm, table length: 560 mm, ram plate width: 280 mm, ram plate length: 280 mm, total length: 1,800 mm, total width: 1,000 mm, total height: 2,650 mm, overall weight: 4,000 kg, year of last overhaul: 1991, - Fixed stop - Punch damping Hedpfx Aoy R Sltsm Tsr - Conventional control (contactor)

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, pressing force: 200 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,400 mm, working height: 730 mm, Equipment: safety light barrier, Müller Weingarten press line: KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common housing and fan system. The remaining elements are independent, which will allow you to work on the presses individually. Also, each press is controlled individually Press in very good technical condition for sale from a liquidated press in Poland Modernized in 2018-2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Hsdpfx Amev Hqnaj Tor Müller Weingarten press line KE 200-16/14.3.1 - 200 tons KE 300-16/14.2.1 - 300 tons KE 200-16/14.4.1 - 200 tons KE 200-16/14.5.1 - 200 tons The presses have a common covers and fan system. The rest of elements are independent, which allows for individual work on the presses. Also, the control of each press is individual A presses in very good technical condition for sale from a liquidated stamping shop in Poland Modernizes during 2018 -2023 New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Year of construction: 1978, condition: used, pressure 80 t throat 280 mm stroke 8-112 mm no. of strokes 55 / 82 Hub/min ram - range of adjustment 80 mm table surface area 800x570 mm ram surface 560x355 mm hole in the table Ø 280 mm table height 800 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 6 t Hjdpfelp U Ddsx Am Tor dimensions of the machine ca. BxTxH 1600x2200x3000 mm

Condition: used, mileage: 499,999 km, power: 425 kW (577.84 HP), first registration: 09/2017, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: air conditioning, parking heater, Vehicle No.: 172-26 Mercedes-Benz 3358 LS Arocs 6x4 HEAVY-DUTY Hydraulic system for low-bed trailers Mileage: 508,757 km * First registration: 09/2017 * EURO 6C * Wheelbase: 3,300 mm * L ClassicSpace cab * Engine: OM473 * TURBO-RETARDER coupling * Drivetrain >120 tons * Auxiliary drive * Pump: MB 131-2c * Transmission: G 330-12 * High-Performance Engine Brake Hsdezc Sq Sspfx Am Ter * Differential lock, rear axle * Saddle height: 1,400 mm * Disc brakes, rear and front * 1 x sleeper berth * Refrigerator box * Auxiliary water heater * Air conditioning * Lane Keeping Assist * Distance Keeping Assist * Active Brake Assist 4 * Rear tire condition: 70-80% * Front tire condition: 50% * Next inspection: 10/2026 * Next emission test: 04/2027 * German vehicle Inspection possible during our opening hours at any time, test drive by appointment only! For export sales, a deposit will be retained, which will be refunded upon receipt of the proof of delivery. Company logos or advertising logos on the vehicles may have been digitally edited in the photos. No guarantee is given for the functionality of the extras. All information is provided without warranty – errors, changes, typos and prior sale are reserved. Vehicle descriptions are explicitly not guaranteed characteristics. We refer to our general terms and conditions and ask that you take note of them.

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center Hodpfxozphf Do Am Ter - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Year of manufacture: 1988 Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Hodpjznhwksfx Am Ter Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: new, Oilgear PVWJ 034 A1UV DFY-P-1NNNN A N hydraulic pump, serial number: 11636335, unused, 100% functional, scope of delivery as shown in the photos. Hjdpfezirqdsx Am Ter

Condition: good (used), Friction wheel, running wheel for bridge crane, overhead crane, indoor crane, assembly crane, workstation crane, wheel block, wheel block system, wheel block system -Manufacturer: Demag, wheel block for crane trolley Hjdpfow Uy Uiox Am Tjr -Type: unfortunately no exact type designation -Wheel: Ø 122 mm / rail width intermediate dimension 63 mm -Hole: Ø 30 mm, dimensions see photos -Quantity: 1x wheel block available -Dimensions: 220/97/H160 mm -Weight: 8.5 kg

Condition: good (used), Shell end milling cutters, milling cutters, milling cutters, shell milling cutters Hedpfx Amerhmnae Tsr -Manufacturer: WMW, shell milling cutter, milling cutter type N 9960 -Size: 160x63x50mm -Receptacle: Ø 50 mm -Dimensions of box: 175/175/H100 mm -Weight: 5.9 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63/86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / Thread Ø28 x 25 mm -Cylinder: outer Ø 75 mm Hedpfjgvwapjx Am Tjr -Mounting: Bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 370/140/H145 mm -Weight: 11 kg/pc.

Condition: good (used), Auxiliary switch, line switch, circuit breaker, load breaker, load disconnector, motor protection switch, circuit breaker, circuit breaker, auxiliary switch, main switch, on-off switch, cam switch -Manufacturer: Schneider Electric, circuit breaker switch disconnector -Type: NSX 400-630 F/N/H/NA Hjdpfex R Sxgsx Am Tjr -Rotary drive: with extension -Transport dimensions: 420/240/H200 mm -Weight: 7.7 kg