Used Weingarten Single-Column - Eccentric Press, Eccentric Stamping Press, Inserting Press for sale (24,285)

Condition: used, Single-column eccentric press WEINGARTEN type E 40 Machine. No. 643/62 Year of construction 1963 Pressure capacity 40 ton. throat depth 250 mm Table opening 150 x 80 and Ø 200 mm Nwodpfx Aaetx E Rqezsl Table surface 560 x 460 mm ram surface 250 x 200 mm Plunger stroke adjustable 8-88 mm Plunger adjustment 63 mm Installation height 320 mm Clamping pin bore Ø 40 mm Stroke rate 100/130 strokes / min. Motor power 2.2 / 3 kW Mains connection 400 Volt, 50 Hz Table height above floor 840 mm - Clutch/brake combination with WEINGARTEN friction threaded clutch with TDC run-through protection - Electric lift release via two-hand control - Overload protection by breaker plate - Manual central grease lubrication - Front crankshaft support bearing - Control cabinet adjacent - UVV for manual insertion work Space requirement L x W x H 1800 x 1500 x 2200 mm Weight 3.1 tons

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Nodpju Rwa Isfx Aazjwl Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Nsdjtx E N Tepfx Aazswl Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Nedpfx Aajdzqltozewl Good condition

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Ram adjustment 60 mm Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new Nwedpfsi A A Tbex Aazel

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min table surface area: 900x640 mm throat: 355 mm Nodpfx Aaeu Nfi Uozjwl ram adjustment: 150 mm mortise hole in ram: Ø 36 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330mm mm total power requirement: 11 kW weight of the machine ca.: 7,5 t transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m Nodpfx Aju Nfkleazswl further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Year of construction: 1980, Technical details: pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm Nwjdpfxou N A Uus Aazsl ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m Nsdsu N Ddwepfx Aazswl - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 1983, Technical details: pressure: 100 t stroke: 20 fest mm no. of strokes: 55 Hub/min throat: 355 mm mortise hole in ram: Ø 36 mm Njdpfx Aaou Nfizjzswl table surface area: 900x640 mm ram adjustment: 150 mm clamping surface ram: 500x415 mm height over floor: 800 mm biggest distance between table & ram: 390 mm passage opening in table: Ø 330 mm total power requirement: 11 kW weight of the machine ca.: 7,5 t dimension machine xH: 1,46x1,58x2,57 m transport dimensions LxWxH: 1,9x1,6x3,1 m Press is without electric cabinet, optional construction of electric cabinet possible. *

Condition: used, Year of construction: 1969, Technical details: pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min distance table/ram: 300 mm Table dimensions: LxB: 440 x 620 mm passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. Nedpfeu Nfkxjx Aazowl The press is equipped with 2-hand control. *

Condition: used, Technical details: pressure: 160 t Nwedpfxou Nfhqj Aazel throat: 760 mm slide stroke: 32...140 mm distance between table / ram: 400 mm ram adjustment: 100 mm no. of strokes: 50 Hub/min table:: 760x1000x95 passage opening in table: 400x350 mm clamping surface ram: 630x850 mm clamping plate: 760x1010x92 mm total power requirement: 15 kW weight of the machine ca.: 6,2 t dimension machine xH: 2,9x1,2x3,4 m dimensions electric cabinet LxWxH: 0,8x0,45x2,1 m - via two hand control - copy of documents digital available Machine can be demonstrated under power. *

Condition: used, Year of construction: 1969, Technical details: pressure: 55 t throat: 250 mm no. of strokes: 120 Hub/min daylight dimension : table/slide up: 380 mm ram adjustment: 55 mm sheet thickness continuous stroke : 2,25 mm Nsdpexu Dwmjfx Aazjwl ram stroke range: 6 - 90 mm total power requirement: 8,8 kW weight of the machine approx.: 2,75 t dimensions L x W x H: 1,4 x 1,2 x 2,2 m

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. For inquiries about this press, please select your offer option! in progress. Nwjdeu N A U Iepfx Aazsl *

Condition: used, Technical details: pressure: 90 t throat: 320 mm no. of strokes: 90 Hub/min daylight dimension : table/slide up: ca. 380 mm ram adjustment: max. 65 mm ram surface area: 600x55 mm clamping plate on table: 800x640x80 mm passage: 260x160 mm adjustment of stroke: 60 fest/fixed mm total power requirement: 5,5 kW weight of the machine approx.: 4500 kg space requirement approx.:: L:1,8xB:0,82xH:2,42 m - single / continous stroke - manual not available - normal maintennance has been executed, overhauled 2010 Nwedpfx Asu Nfg Hsazjl - at the moment without electric cabinet, without control, without air pressure tank i.D. *

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) Nwodpfjxabvksx Aazsl - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg Nwjdpfx Ajxabrreazol range L-W-H 1310 x 1250 x 1860 mm

Condition: new, pressure 10 t throat 160 mm Nwedpfsxaad Hsx Aazol stroke 0 - 40 mm table: 270 x 370 mm table: 100 mm - Bohrung no. of strokes 200 Hub/min bore 25,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 180 mm total power requirement 0,75 kW weight 590 kg range L-W-H 1.168 x 1.010 x 1.670 mm

Condition: used, Single-column eccentric press KIESERLING & ALBRECHT, type PEDRU 100 Factory No. 549150, Year of manufacture 1990 Pressing force 100 tons Reach 320 mm Frame opening at the rear 400 mm Table size 830 x 600 mm Ram size 600 x 355 mm T-slot hole Ø 50 mm with clamping piece Table height above floor 880 mm Ram stroke 8 - 129 mm Ram adjustment travel 80 mm Installation height approx. 350 mm (with table insert plate) Stroke rate approx. 55 strokes/min Motor power 11 kW Drive power 400 Volt, 50 Hz - Overload protection in the ram with shear plate - Ram weight compensation cylinder - Automatic centralized lubrication with motor drive - Pneumatic clutch-brake combination - Pneumatic auxiliary brake DESCH - Table clamping plate 90 mm thick - Electric foot switch and 2-hand operation - Control cabinet fixed to the machine - Press control with SEZ, OTR and ZBS - UVV 11.062 § 9 Para. 3 (Safe for manual feeding operations) - Draw cushion or ejector in the table plate (custom-built) Ø 125 mm, stroke 50 mm - currently not functioning Nwjdpfx Ajz Alg Sjazol Space requirement L x W x H 2000 x 2000 x 2880 mm Weight of the press 10 tons Good condition

Condition: used, Single-column eccentric press KRUPP, type PEKRD 125 h Machine No. 2861, Year of manufacture 1977 Pressing force: 125 tons Reach: 400 mm Table size: 950 x 750 mm Nedpfxjdzqddj Aazowl Ram area: 800 x 540 mm Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Installation height for maximum stroke at the top: max. 550 mm Stroke rate: 60 strokes/min. Table height above floor: 800 mm Motor power: 10 kW Power connection: 380 volts, 50 Hz - Hydraulic overload protection in the ram - Pneumatic clutch and brake combination ORTLINGHAUS - Ram weight compensation cylinder - Motorized ram adjustment - Tabletop with ball bearings - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2, No. 3b for manual feeding operations Space requirement L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 tons Good condition (very little use)

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm Nsdpfx Aaju N Dfhjzewl no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm ram surface 750 x 380 mm Nedpfx Ajzwg Umsazowl daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: used, Year of construction: 1966, pressure 040 t Nwsdpoy Nd Svsfx Aazel throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, Year of construction: 1972, pressure 40 t Nodpfx Aaeztfz Rozowl throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS Nwedpov Tp D Hjfx Aazol - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition