Used Welter Ws 1250 for sale (2,138)

Condition: ready for operation (used), A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible. Ksdpfjx Uq Twsx Al Nslu

Condition: excellent (used), Year of construction: 2004, turning diameter 850 mm turning length 2200 mm control Siemens 840 D Kodpfsyhrb Ujx Al Nelu

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts. Kodpeyw Hxnjfx Al Nelu

Condition: used, Year of construction: 1974, Technical details: total power requirement: 1,65 kW weight of the machine approx.: 620 kg Kljdpfxewqplkj Al Nju Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Condition: used, Year of construction: 2021, functionality: fully functional, We offer this used Kuper FWS 1250 veneer splicing machine, year of construction 2021. Ksdpfezbdf Sox Al Nslu Well-maintained and serviced. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system Kjdpoxdxccefx Al Nslu * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Kljdpfow Az Rpex Al Nsu

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Klodpfx Aloy T Irhs Neu Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: used, Multiplex boards Kjdpfx Aljl Uvxno Nelu used length 1680 mm width 1250 mm board thickness 45 mm weight 68,5 kg in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Year of construction: 2012, condition: excellent (used), ct1135 SARTORIUS EWK 3010 WS high speed checkweigher Year of production: 2012 Type EWK3010 / WS10kg VV Load capacity: Minimum: 50g Maximum: 10 kg checkweigher for packages: 200-3000g Quantity: 60 pcs / minute Conveyor belt: 1100 x 700 mm Max. Speed: 1 m / s Total dimensions: 1100 x 1050 x Ht 1650 mm Specification for EWK 3010 measuring electronics Combined with the SARTORIUS measuring system, the EWK 3010 measuring electronics are high-performance results in a check balance. Such an "automatic checkweigher" may be used folding boxes, cartons, bags, boxes, cups, etc. For 100% inspection of packaged products, Kodpfxog Rkwbe Al Nolu to sort and evaluate your weight data. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been translated automatically. Translation errors are possible.

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Kledpfxown D Uhe Al Nsu Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: used, Artrhur Klink RSH1 - 1250 Broach Grinder 09.2009 , new 1979, Table 200 x 1800, Electro mag 200 x 600, with related tooling/accessories, no cabinet. Klodozc Iq Ijpfx Al Nsu

Condition: good (used), Year of construction: 1970, grinding diameter: 1,200 mm, grinding length: 5,000 mm, Accurite digital readout Chuck diameter 900 mm Crank shaft head counter balance weight 2 x 4 different sizes  4 x steady rest dressing device  6 segment stone up to 1500 mm diameter In feed stone 0,0025 - 0,050 mm Table feed rate 50 - 3975 mm/Min Coolant & Filtration system Centre height: 600mm Grinding Ø: 1200mm Grinding length: 5000mm Grinding stone dimensions:1600 x 100mm Grinding stone speeds: 1620Rpm Length: 17500mm Width: 5500mm Kljdpfx Aswrxqxsl Nsu Height: 2200mm Weight: 60000kg

Condition: used, all stainless steel with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists Kljdpfx Aezcl Drsl Nsu dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. Kjdjzcax Rspfx Al Nslu 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 used steam boiler Klodswra Ewopfx Al Nou ----- Manufacturer: LOOS Gunzenhausen Type: U-HD 1250 Heating surface approx.: 20 sqm Max. boiler output: 1,250 kg/h Operating pressure: 13 bar Increased test pressure: 23.4 bar Water content at normal level approx.: 993 l Full water content approx.: 1,365 l Year of construction: 2000 Equipped with Weishaupt gas burner type G7/1-D, ZMD, 300-1,750 kW, gas control section, control cabinet, feedwater pump and the available rough and fine fittings.

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min Klsdpfevcrmpsx Al Nou feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: excellent (used), Year of construction: 2017, operating hours: 9,982 h, functionality: fully functional, turning length: 1,250 mm, turning diameter over cross slide: 500 mm, turning diameter: 500 mm, spindle speed (max.): 12,000 rpm, spindle bore: 76 mm, rotational speed (max.): 5,000 rpm, bar diameter (max.): 76 mm, Equipment: documentation/manual, rotational speed infinitely variable, We are not a dealer. More detail photo's are coming soon. We have for sale, this exceptional machine, fully loaded and ex-demo in perfect condition. It is possible to buy machine turn-key: including all tools and clamping devices, postprocessor. Even training is possible. machine is under power and is still operating. You can visit machine under working condition. Any inspection is possible. DMG MORI CTX BETA 1250 TC Gen2 Siemens 840. Main spindle ISM76. Sub spindle . Tailstock machine. Milling head 12.000 rpm B-axis compactmaster2. 5-axis simultaneous machining!! Capto C6 – 80 tools chain magazine!! Robot/barfeeder/automation package : +automation interface +Signal light +electrical door +barfeeder inferface +parts catcher +coolant flush mainspindle +coolant flush subspindle Chip conveyer Machine cooler system external ()Tropical package) Oil mist extraction system Coolant spray gun Hydraulic differential clamping pressure 8/20/80 bar coolant supply with filter and cooling unit (biggest tank): +80bar high pressure +filterunit +coolant water chiller a/c +internal coolant +external coolant Measuring/monitoring: 3D Probe Heidenhain Tool probe Heidenhain DMG technology cycles: +Tool sorting cycle +Multitool +Alternating speed +Retraction cycle +5-Axis simultaneous machining +MPC (machine protection control) +Excentric Machining +oval turning +Probing Barfeeder (shortloader). Fusion 360 postprocessor possible Main spindle chuck: Schunk 315 Subspindle chuck: Hainbuch 65 Toolholders: Sandvik/Hoffmann Capto C6 tools Spindle liners different sizes (oem DMG) Original DMG lifting gear. All documentation complete. Klsdpfszdck Sjx Al Nou Max turning length: 1200mm Max. turning diam: 470mm Tool magazine: 80 tools Main spindle speed: 5000 rpm Subspindle speed: 5000 rpm Milling spindle speed: 12000 rpm (Best TC ever made, stronger than new CTX450TC). Please feel free to ask any question. Machine is for sale turnkey. Machine is for sale as base machine (without tooling etc).

Year of construction: 2016, condition: used, Cooling unit Frigo Carrier Supra 1250Mt Year of manufacture: 2016 Complete with condensers and 8-meter cooling unit. Cevoman bv. Lenskensdijk 5 2200 Herentals Kedpezd D E Asfx Al Nslu Belgium

Condition: as good as new (ex-display), Year of construction: 2003, functionality: fully functional, workpiece height (max.): 1,250 mm, workpiece diameter (max.): 1,950 mm, THE TURNMILL. BUILT IN THE EARLY 2000’S WELL IN ADVANCE AT THAT TIME. COPIED BY SEVERAL MANUFACTURERS SINCE. THIS IS THE ACTUAL DEMONSTRATION MACHINE USED IN HOUSE FOR THE COMPONENTS SEEN IN THE PHOTOGRAPHS THE TURNMILL IS A WONDERFULLY VERSATILE TURNING, MILLING AND GRINDING MACHINE WITHIN ITS CAPACITIES Swing 1950mm; turning 1500mm; workpiece height 1250mm; table speeds to 630rpm Kjdpfx Aljy Uxv Ts Nelu Condition perfect. Equipment extensive. Value for money - impressive

Condition: new, Heidenhain ROD 426 1250 01-03 rotary encoder. 295 434-86, serial number: 7513448, unused, 100% functional, delivery as per photos. Kljdpjy Nqqfofx Al Nsu

Condition: ready for operation (used), Allen Bradley 2711P-RDB12C Panelview Plus 1250 Colour Key/Touch Display Module Series D, SN: 41269093, used, minor signs of wear, 100% functional, delivery as shown in photos. Kljdpfjx Eqtxex Al Neu

Condition: new, Heidenhain ROD 320.020 1250 rotary encoder. 538 723-05 serial number 16152709 – unused! Kedpfx Aoy Nqpnsl Nelu

Condition: ready for operation (used), Heidenhain RON 425B.0015-1250 rotary encoder ID: 256 080 73 SN: 6 391 665, used, as good as new, 100% functional, scope of delivery as per photos Ksdpfx Alji Eaw Hs Nolu

Condition: new, Heidenhain ROD 320.002 1250 rotary encoder. 244 847-06 Serial number 2688447D – unused! – Kledpfey Nqpbex Al Neu