Used Wmw Mit Übersetzung for sale (7,577)

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other Njdpfx Aoz Ipdvsbujlh F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Nodpfsz Ehfasx Abujlh Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. Nodpfewcgr Ejx Abuolh FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya10, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. Nedpoz Ipunjfx Abuslh MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: used, Profile steel shears, hand lever shears, hand sheet metal shears, sheet metal shears, sheet metal shears -Scissors: 185 mm Nljdpecht Utefx Abueh -cutting: 40 mm angle iron -cutting: Ø mm round steel -Dimensions: 460/985/H2220 mm -Weight: 88 kg

Condition: used, Niles Centre Lathe, Type DLZ800 LIV5000, Approx 5.2m Between Centres x 860mm Swing Over Bed, 250mm Swing Over Saddle, Fitted with 750mm 4 Jaw Chuck, 2 Fixed Steadies Steadies, Total Weight 7 Tons, Serial No Specifications: Nljdpezvrrhefx Abujh Swing: 1,000 mm Centers: 8,000 mm

Condition: excellent (used), Year of construction: 2011, operating hours: 39,090 h, functionality: fully functional, machine/vehicle number: 14390, travel distance X-axis: 1,350 mm, travel distance Y-axis: 970 mm, travel distance Z-axis: 1,300 mm, total height: 4,150 mm, total length: 8,500 mm, total width: 5,500 mm, overall weight: 32,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 6,000 rpm, operating hours of spindle: 8,407 h, coolant supply: 80 bar, spindle motor power: 30,000 W, spindle nose: HSK-A100, number of slots in tool magazine: 60, Equipment: chip conveyor, Travel distances Travel distance X: 1350 mm Travel distance Y: 970 mm Travel distance Z: 1300 mm with measuring system from Haidenhain Pallet size: 800 x 1000 mm Table load: 2000 kg Horizontal/vertical milling table Working spindle Diameter at the front bearing: 110 mm Drive power: (60% duty cycle) 30 kW Nedpfxjz Nc Eie Abuslh Drive power: (100% duty cycle) 29 kW Torque: (60% duty cycle) 1088 Nm Torque: (100% duty cycle) 985 Nm Spindle speed: 20…6000 rpm Spindle taper: HSK-A100 NC rotary table with 500 rpm Table speed for positioning operation up to 60 rpm Table speed for turning operation up to 500 rpm Operation at 100% duty cycle with speed >200 rpm max. 20 min Workpiece diameter incl. fixture 1400 mm Workpiece height: 1400 mm Workpiece weight incl. fixture up to 60 rpm 2000 kg Workpiece weight incl. fixture above 60 rpm 1200 kg Tangential moment 10000 Nm Tilting moment 20000 Nm Drive power (100% duty cycle) 57 kW Drive torque (100% duty cycle) 2520 Nm Machine is equipped with automatic imbalance detection Tool changer: 60 positions Max. tool diameter: 325 mm Max. tool length: 450 mm Max. tool weight: 35 kg Internal coolant supply through the spindle center up to max. 80 bar Additionally: - Coolant gravity band filter from Knoll - Chip conveyor Knoll - HYFRA industrial cooling system - 1x special pallet for turning with 4 jaw chucks 50-2 D1000mm - 1x exchange pallet with T-slots 800x1000mm - 3x exchange pallet with threaded holes DIN55201 800x1000mm - Pallets without workpiece clamping devices - Electronic handwheel - Optical measuring probe OMP60 from Renishaw Net machine weight with H/V table approx. 32500 kg Space requirement approx. (L x W x H) 8500x5500x4150mm Technical data without guarantee. Errors and prior sale reserved.

Condition: new, functionality: fully functional, Aerial work platform, work basket with platform for forklift (like new) Width: 870mm Depth: 870mm Guardrail height: 1020mm / 1500mm / Total height of forklift protection mast: 2330mm Nlsdpfx Abozyu Tisujh Includes extension: 480mm with side access With forklift mounting distance: min: 550mm – max: 940mm Forklift tine receiver: width max. 190mm x height 90mm Available in stock.

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Nlsdezl D Ruepfx Abujh Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition Nlodpfxj Afaugj Abueh year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: like new (used), Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressing force: 100 t, stroke length: 500 mm, operating speed: 400 mm/s, reverse speed: 450 mm/s, table width: 1,250 mm, table length: 630 mm, table height: 860 mm, throat depth: 360 mm, ram plate width: 850 mm, ram plate length: 450 mm, distance table to ram: 800 mm, retraction force: 1.6 t, total length: 2,300 mm, total width: 1,865 mm, total height: 3,650 mm, overall weight: 7,000 kg, year of last overhaul: 2026, controller manufacturer: SIEMENS, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic C-frame press ZEULENRODA | 100t | Retrofit system from 2026 with CE conformity + manufacturer's warranty --3 units available | short delivery time-- HIGHLIGHTS - Press frame in steel welded construction for maximum stability and rigidity - Press force 1,000 kN | adjustable based on stroke and pressure - Clamping area, table 1250 x 630 mm - Ram stroke 500 mm - infinitely adjustable Nodez Hcz Sepfx Abuolh - Ram plate with anti-rotation protection and guided by columns - Rapid traverse and short stroke function - Active oil cooling - Hydraulic ball-type quick-release couplings for safe and fast tool changes - Protection on the operator side via light curtain, on the side and rear via safety guard - SIEMENS control + touch panel - Interface for automation - Comfortable operation with BWS-1 cycle + BWS-2 cycle - Remote maintenance - CE conformity + manufacturer's warranty Ram column guidance: - Two diagonally arranged guide columns each. They also serve to prevent the ram plate from twisting. Hydraulic equipment: - Oil tank, hydraulic control / pump completely installed and ready for operation with all required pipelines, pumps and valves as well as the control units. - Electronic stroke measurement system - Stroke control: stroke-dependent - pressure-dependent - stroke-pressure-dependent - Option for setting a press time of 0 ... 10 minutes Safety: - BWS / light curtain on the operator side - Transparent protective elements on the sides, movable - Retraction lock (interlock) - Hydraulic and electrical safety devices in accordance with DIN EN 16092-3 Control / Operation: - SIEMENS - Touch panel control unit as a lift console (height adjustable) - Standing two-hand control unit - 100 storable tool data sets - Transfer of stroke parameters using the teach-in method - Various password levels - ... Operating modes of the press - Off - Setup / Two-hand - Single stroke / Two-hand - Single stroke BWS 1 cycle / 2 cycle - Master / Combined operation / Automation Tool control / protection - 6 x tool cams (24V / 2A outputs), freely programmable - Electronic tool protection with 8 inputs, freely configurable Remote maintenance (eWON Cosy) Service & Support ZEULENRODA PRESSTECHNIK

Condition: ready for operation (used), functionality: fully functional, Spomasz spiral mixer, 350L, with feed system for a 200L mixing container. Sold on behalf of a customer: functioning machine, no warranty, no returns. Njdpfxozmp Rcj Abujlh

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Nedowauaxjpfx Abujlh

Condition: used, Offered is a CNC knee-type milling machine, model FU 400 × 1600. Clamping surface: milling table with T-slots. CNC control: VEB Numerik CNC-H 646. Equipped with a machine vise, flexible coolant hose and swiveling CNC control panel. Inspection possible by arrangement. Nlodpfx Aj Afpkwebujh

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Nljdpfjq Am Ivex Abush

Condition: used, Year of construction: 1981, functionality: fully functional, overall weight: 4,800 kg, total height: 1,800 mm, total width: 3,500 mm, total length: 3,200 mm, Grinding machine NILES ZSTZ 315/630 C2 Max. wheel diameter: 315 mm Max. module: 10 Min. module: 1.5 Max. gear width: 160 mm Max. workpiece weight: 200 kg Engine power: 8 kW Nodpfx Aez Tc Akobuolh Machine dimensions: 3.2 x 3.5 x 1.8 m Machine weight: 4.8 t

Condition: used, ZERBST DP/S3 cnc Heavy Duty Lathe Manufacturer: ZERBST (Germany) Year: 1991 Machine Type: Heavy Duty Facing & Centre Lathe simens control Maximum Turning Diameter: Ø1,600 mm Distance Between Centres: 4,700 mm Spindle Bore: 110 mm Main Motor Power: 55 kW Spindle Speed: 3.5 – 450 rpm Bed Design: Triple guideway cast iron bed Nodpfsztff Njx Abuolh Control : Siemens Tailstock: Powered tailstock Thread Cutting: Yes Maximum Workpiece Weight: Up to 12,500 k

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Nledpfezzrutsx Abush Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, functionality: fully functional, 1. Machine specifications * Pallet changer with 6 pallets - Clamping area: 4 x 800 x 800 mm 2 x 800 x 1000 mm - Max. clamping weight: 2000 kg - Interference circle: D = 1200 mm - Changeover time: 35 sec. * Travel ranges - Workpiece (x): 1140 mm - Support vertical adjustment (y): 910 mm - Column transverse adjustment (z): 875 mm * Max. feed force: 20,000 N * Rapid traverse: 24 m/min * Working spindle - tool holder - SK 50 DIN - Drive power 100/40 % duty cycle: 22/32 kW - Torque 100/40 % duty cycle: 720/1040 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine (cassette): 186 positions - Average chip-to-chip time: 11 sec. * Control system: Siemens 840C * Work area protection 2. Year of manufacture: 1995 The machine was only used in production until February 2011!!! Nsdpfxez H Tqds Abuelh 3. Warranty: none 4. Prices: * Machine: €30,000.00 5. Delivery conditions: * Payment terms: 100% before collection * Delivery date: ex-stock

Condition: used, total width: 900 mm, total length: 2,050 mm, total height: 2,100 mm, Year of manufacture: 1956 Colour: Green Empty weight: 2.400 kg Nedpfxoz R Dt Ee Abuelh - Year: 1956 - Serial number: 3706 - Drive system: Conventional - Drive system: Gear drive - Number of drills [pcs]: 4 - Power [kW]: 6 - Table type: Fixed table - Table length [mm]: 1800 - Table width [mm]: 350 - Drilling depth [mm]: 160 - Drilling capacity [mm]: 25 - Reach [mm]: 275 - Main spindle power [kW]: 6.0 - Min. spindle speed [rpm]: 180 - Max. spindle speed [rpm]: 2000 - Options: Tapping function - Transport dimensions: 2050mm x 900mm x 2100mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,250 mm, total width: 2,100 mm, total height: 3,300 mm, Colour: Green Empty weight: 7.000 kg Price: On request - Drive system: Conventional - Press force [ton]: 100 - Min. stroke [mm]: 20 - Max. stroke [mm]: 140 - Table length [mm]: 580 - Table width [mm]: 780 - Ram width [mm]: 400 - Throat depth [mm]: 315 Nlsdpozrxr Tefx Abujh - Max. opening height [mm]: 560 - Height adjustment [mm]: 70 - Pressing speed [mm/s]: 360 - Transport dimensions: 1250mm x 2100mm x 3300mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Nljdpfx Abjzwc Sbsush Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), functionality: fully functional, 1. Machine specifications: * Travel ranges - Table longitudinal travel (x) 1190 mm - Cross slide transverse travel (y) 530 mm - Column vertical travel (z) 540 mm * Table surface area 480 x 1600 mm * T-slots 18 mm at 80 mm spacing 5 * Table load capacity 1500 kg * Tool holder SK 50 DIN 2080 * Diameter in the front bearing 100 mm * Milling spindle drive power 15 kW * Speed range 35.5 ... 1800 min-1 * Number of speeds 18 * Step ratio, automatic shifting 1.25 * Max. torque 2200 Nm * Feeds 3 ... 2000 mm/min * Rapid traverse longitudinal and transverse 10000 mm/min vertical 5000 mm/min * Coolant system 40 l/min * CNC control TNC 360 Heidenhain, feed motors SIEMENS * Connected load 35 kW * Machine weight 5400 kg 2. Technical condition The machine was only used in production until May 2009!!! Due to the overhaul, the machine meets the acceptance conditions for new machines. All guideways have been re-scraped. Ball screw drive and measuring systems in all axes have been replaced. All motors have been checked and repaired in the authorized workshop. The milling spindle has been checked and repainted. A milling head can be provided for vertical machining. 3. Warranty: last inspection 04/2026 3 months 4. Prices * Machine 59,000.00 € Nlsdpfx Abez H Ttxeuoh * Assembly/Commissioning 5,250.00 € 5. Delivery conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding value-added tax. We reserve the right to sell the machine in the meantime. Our terms and conditions of delivery and service apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% after handover * Delivery date: ex warehouse

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, For sale: this lathe. General overhaul completed in 2009. Swing diameter over bed: 1,000 mm Turning length: 5,000 mm Siemens Sinumerik 840D The machine is currently finishing a job and will be available at the end of January 2026. Nlsdpfoxxvqaex Abueh

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request Nledpfxoz I Eggo Abush the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly