Used Wpm 400-C for sale (65,570)

Year of construction: 1999, condition: reconditioned (used), Machine is currently undergoing overhaul PROCESSABLE MATERIALS Depending on material properties and sheet configuration: · Paper with a minimum grammage of 80 gsm · Cardboard or solid board up to a grammage of 2,000 gsm · Corrugated board up to a total thickness of 4 mm (max. sheet curvature 4%) PERFORMANCE DATA Max. sheet format: 820 x 1,130 mm Min. sheet format: 350 x 400 mm Max. cutting force: (400 t) 4.0 MN Max. machine speed: 9,000 sheets/h Standard equipment of the machine: Feeder Non-stop high-performance sheet feeder W3 equipped with: • Automatic non-stop device • Automatic pallet changeover • Suction head • Double-sheet detector • Motorized stack side correction • Motorized suction head adjustment • Conveyor table with pneumatic cover frame • Compressed air and vacuum pump Register Table • Operator-side side lay, switchable between pull and push mode • Light sensor for accurate side alignment of sheets • Fine adjustment of the side lay • Two active front lays with light sensor for register control • Two inactive front lays for sheet stabilization • Separate fine adjustment of gripper edge for drive and operator side • LED display for accurate front and side lay registration • Trend display for sheet detection • Sheet rejection, disabling only the feeder • Height-adjustable top lay for positive sheet guidance Die-cutting station • Roller-guided support rails for the chase • Roller guide for die-cutting plate on swing-out support arms • Motorized die pressure adjustment • Automatic device for lifting the chase to the platen • Electronic die-cutting force display with max. pressure limitation • Vacuum device in sub-table for thin cutting plates Stripping Unit • Frame drive and frame lift for upper tool frame • Mount for the stripping board with centerline fine adjustment • Device for sample sheet removal • Upper tool frame • Lower tool frame Delivery • Fully automatic pile stacker, pre-selectable • Counted sub-stacks with automatic insertion of uncut sheets • Can form sub-stacks (interleaved sheets between 250 gsm – 800 gsm) Dkedpfxeyuuzdj Apbju • Frame lift for upper tool frame • Mount for change frames with electric adjustment in running direction • Pneumatic frame locking • Switchable gripper opener cam and sheet ejector • Sheet jogging device • Integrated conveyor belt for gripper edge or waste grid removal (double-cut) • Separator sheet magazine with electronic level control, refillable from B-side during production • Tool frame with centerline • Change frame for standard pile delivery / gripper edge removal • Change frame for blank separation grid • Mounting kit for separation punch • 8 x sheet hold-downs for standard pile delivery • 4 x cross support bars Options: • QTM – Patented guide rails • QTM – Chase with quick lock system and X/Y adjustment • QTM – Upper stripping frame with quick lock system • QTM – Upper delivery frame with quick lock system • Control upgrade to latest Siemens S7 controller • New generation frequency converters • Modem for remote service connection • Machine height increase: 900 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,995 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: iTNC530 (HSCI), workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,500 mm, total width: 4,500 mm, table width: 65 mm, table length: 650 mm, table load: 600 kg, rotary table diameter: 650 mm, overall weight: 10,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 8,995 h, coolant supply: 40 bar, spindle motor power: 15,000 W, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The HERMLE C 400 U is a high-quality 5-axis CNC machining center, designed for precise and efficient machining. With a working area of 850 × 700 × 500 mm and a Ø650 mm swiveling/rotating table, this machine offers ample space for both complex and larger workpieces. The machine is installed and operational at our facility and can therefore be inspected while running! Additional options & accessories: - Chip conveyor - 40 bar internal cooling (IKZ) - Band filter system incl. 2 new rolls of filter paper. - BLUM LaserControl NT measuring system for tools. Dkjdpfx Aez Nluuopbsu - Heidenhain TS 460 3D probe - Electronic handwheel - Tool cabinet incl. approx. 100 pcs. HSK-A63 tool holders, collets and accessories. - 2 pcs. All-Matic machine clamp - Heidenhain reference pin - Manual cabinet roof - Original HERMLE + Heidenhain documentation. Weight & dimensions: approx. 10,000 kg approx. 4.5 x 4.5 x 3 m

Condition: excellent (used), Year of construction: 2017, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 25787, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,900 h, Equipment: chip conveyor, documentation/manual, Hermle C 400 U – 5-Axis Machining Center Year: 2017 Control: Heidenhain TNC 640 Condition: Very good Machine ON: 18,512 h Program: 9,268 h Spindle ON: 6,900 h Drive ON: 18,514 h Axes in motion: 7,147 h Technical specifications: X/Y/Z travel: 850 / 700 / 500 mm A-axis: 25 rpm C-axis: 30 rpm Spindle speed: up to 18,000 rpm Power: 20 kW Torque: 173 Nm Tool holder: HSK 63 Tool magazine: 38 + 50 positions NC swivel rotary table: Ø 650 mm Swivel range: +91° to −139° Equipment: Heidenhain touch probe BLUM tool measurement Electronic handwheel Chip conveyor Dksdpfxsz H Agbj Apbou Oil mist extraction Inspection possible by appointment.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. Dkedpfx Ajyvac Aspbou 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: used, Year of construction: 2020, operating hours: 8,555 h, functionality: fully functional, clamping force: 1,500 kN, heating capacity: 19 kW (25.83 HP), pump power: 71 W, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 90 A, We are offering this used ARBURG 470 C 1500-400 injection molding machine, manufactured in 2020, from ongoing production. Includes INTEGRALPICKER. Type: 470 C 1500-400 Machine No.: 254634 Year of Manufacture: 05/2020 Dkodpjzhar Hjfx Apbsu Operating Voltage: 400 V, 50 Hz Control Voltage: 24 V Rated Current Motor/Heater: 71 / 19 A Total Current: 90 A Total Connected Load: 53.5 kW Pump Operating Hours: 8555 40 mm plasticizing cylinder set (without nozzle) Open nozzle 40 mm with internal thread for screw-in nozzle tips Internal thread up to injection unit 290: M 24 x 1.5 Internal thread from injection unit 400: M 36 x 2 Price: €48,000.00 Available from the end of December 2026. If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 766 h, clamping force: 400 kN, screw diameter: 18 mm, Hydraulic injection moulding machine manufactured in 2024. This Arburg Allrounder 270 C 400-70 features a clamping force of 400 kN and a maximum specific injection pressure of 2738 bar. It includes a mould height range of 160 - 475 mm and a distance between tie bars of 280 x 280 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 270 C 400-70 machine we have for sale. Contact us for further details. Dkjdpfx Ajz Eq S Nepbou - Max. Specific Injection Pressure: 2738 bar- Max. Swept Volume: 28 cm³- Mould Height: 160 - 475 mm- Distance Between Tie Bars: 280 x 280 mm- Centering Diameter (Ejector/Nozzle): 110 mm / 125 mm- Operating Hours (Pump): 766 hrs- Core Pull: 1- Heating Control Circuits: 3 electrical heating control circuits for mould heating, max. 2 kW/230 V- Cooling Circuits: Programmable machine-related cooling circuits, cooling water distribution with 3 free circuits (DN 13)- Nozzle Specifications: Open nozzle 18 mm with M 24x1.5 internal thread, flat nozzle tip, nozzle heating band- Control System: SELOGICA direct control with 15-inch (38.1 cm) touchscreen user interface- Connectivity & Interfaces: Basic Connectivity (CPU Ethernet port, IIoT Gateway), EUROMAP 67 robot interface (50-pin), EUROMAP 65 chip card operating authorization, CompactFlash & USB interface, Printer interface (serial USB), Interface for colouring/dosing unit

Year of construction: 1985, condition: used, Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026. Dkedoz Agfpopfx Apbsu

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 injection molding machine Year of manufacture: 2006 Clamping unit Clamping force: 400 kN (40 tons) Distance between tie bars (H × V): 320 × 320 mm Injection unit Screw diameter: 30 mm Maximum injection volume: 85 cm³ Maximum injection shot weight (PS): 77 g Maximum injection pressure: 2000 bar Maximum screw speed: 400 rpm Nozzle stroke: 250 mm Nozzle clamping force: 40.6 kN Heating power: 9.4 kW Drive and power Pump drive power: 11 kW Total installed power: approx. 20.5 kW Dimensions and weight Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Dedpfjzw A Ehox Apbeku Machine weight: approx. 2,400 kg Additional information The machine is equipped with a new screw, which is covered by a warranty.

Condition: used, Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m Djdpoz Iqvaefx Apboku All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production. Dksdpfxsxvy Rlj Apbsu

Condition: excellent (used), Year of construction: 2006, ARBURG 320 C 400-170 Injection Molding Machine Manufacturer: ARBURG Model: 320 C 400-170 Year of manufacture: 2006 Machine type: hydraulic injection molding machine for plastics Clamping force: 400 kN / 40 t Dimensions of mounting plates (H × V): 446 × 446 mm Distance between columns (H × V): 320 × 320 mm Minimum mold height: 200 mm Maximum opening / daylight: 550 mm Screw diameter: Ø30 mm – NEW screw Injection volume: 77 cm³ Maximum injection weight: 77 g Maximum injection pressure: 2,000 bar Rated power of the pump motor: 11 kW Heater power: 9.4 kW Net weight of the machine with control cabinet: approx. 2.3 t Machine dimensions (L × W × H): 3.4 × 1.4 × 2.0 m Screw condition: The machine will be equipped with a brand new Ø30 mm screw before sale. Machine location: Poland Dodpjxwu R Nefx Apbjku

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Dkjdpfow E Itiox Apbou Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 300 h, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Dksdpfxozvm Azo Apbju - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Condition: used, Year of construction: 1998, Serial No. 174520, control unit, manufacturer Arburg, closing force 400 kN, screw diameter 20 mm, sprue picker, manufacturer TecnoMatic, type micro cnc, vacuum separator, manufacturer Piovan, type DPA20, year of manufacture 2016, microprocessor control, 2 temperature control units, internal numbers 14 and 19, F, drying cylinder, desiccant dryer, manufacturer Piovan. Dkjdpfx Apoz Hl H Robsu

Condition: excellent (used), Year of construction: 2019, X-axis: 850 mm Y-axis: 700 mm Z-axis: 500 mm A-axis: +31 to -139 degrees C-axis: 360 degrees Rotary table diameter: 650 x 540 mm Dsdpfxjz E U Eae Apbsku Tool interface: HSK-A63 Tool changer: 88 positions Spindle speed: 18,000 rpm Control system: Heidenhain TNC 640 Including: coolant through spindle at 40 bar Including: air blow-through through the spindle center Including: Heidenhain measuring probe Including: BLUM LC 50 Type 200 tool measurement / tool breakage detection Including: BLUM LC 50 DIALOG technology Including: Rotoclear Including: Documentation Operating hours: approx. 8,600 The machine is in very good condition and is still in daily use. Available in approximately 3 weeks.

Condition: good (used), Year of construction: 2006, Clamping force: 150 tons Opening stroke: 500 mm Djdpfx Apezatfrebjku Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 470 mm Mould clamping plattens (b x h) : 650 x 650 mm Ejector stroke: 175 mm Screw diameter: 40mm Injection volume: 201 cm3 Shot weight: 184 g Working hours: 33.165 h Core pullers: 1x Air blast: 1x Robot interference: yes

Condition: ready for operation (used), Year of construction: 2010, Make: SPINNER Type of machine: TC 400-52 MC Year of manufacture: 2010 Control system: Siemens SINUMERIK 840D SolutionLine Machine's weight: 4.000 kg Tool holder: VDI 30 / DIN 69880 x-travel: 200 mm y-travel: nicht vorhanden z-travel: 515 mm Speed range: bis 5.000 U/min Spindle lock: A6 Cutting diameter: 280 mm Driven tool: Ja Turning length: 500 mm Chip removal device: Ja Tailstock: Ja, hydraulisch / MK4 Overall dimensions: 2.100 × 1.350 × 1.800 mm (ohne Stangenlader) Chuck size: 210 mm Chuck size: 210 mm Traverse Z-axis: 515 mm Tool turret - slots: 12 Dkedpez I Nawefx Apbeu Counter spindle: Nein C-axis: Ja Spindle opening: 52 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 30,600 h, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2017. It features a Wire Guide Set for Ø 0.250 mm and a Taper Tapering Kit for 45° taper cuts. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Dsdpfxsz Hwt Aj Apbeku - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: excellent (used), Year of construction: 2008, Arburg 470C 1500-400 with the Wittmann W711 robot Year of construction: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 150 t Distance between tie bars: 470x470 mm Size of the clamping platens: 650x650 mm Dksdpfx Aez Ip E Hopbeu Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 1 Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Robot Wittmann W711 Year of construction: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 4900 kg Length/width/height: 4.44x1.63x2.09 m Drive: Pump/motor: 18.5 kW Heating output: 9.7 kW Total output: 28.2 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display Djdjyc H N Nspfx Apbsku • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 800 mm, wire diameter (max.): 0.33 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis +GF+ AGIECHARMILLES CUT 400 Sp was manufactured in 2014. It features an impressive X/Y/Z axes travel of 800 mm x 550 mm x 510 mm and U/V axes travel for tapering of 800 mm x 550 mm. The machine can handle workpieces up to 1300 mm x 1000 mm and 3000 kg in weight. If you are looking to get high-quality wire EDM capabilities, consider the +GF+ AGIECHARMILLES CUT 400 Sp machine we have for sale. Contact us for further details. Dkodpsz Hwnyjfx Apbeu - Overall Dimensions (L x W x H): 2670 x 2870 x 2645 mm- Total Weight without Dielectric: 6300 kg- Total Weight with Dielectric: 8040 kg- Max Noise Level: 76 dB- Sliding Door: Yes- Worktable Dimensions: 1240 x 800 mm- Max Workpiece Dimensions: 1450 x 900 x 510 mm- Max Workpiece Weight: 3000 kg- Max Dielectric Level: 520 mm- Axis Travel X, Y, Z: 800 x 550 x 510 mm- Axis Travel U, V: 800 x 550 mm- Taper Angle / Height: ±30°/510 mm (Option ±45°/510 mm)- Taper Tapering Kit: Kit for 45° taper cut (Kit für 45° Konikschnitt)- Measurement Resolution X, Y, U, V, Z: 0.05 µm- Axis Speed: 0...3000 mm/min- Dielectric Type: Deionized water- Dielectric Total Volume: 1700 L- Dielectric Temperature Control: Automatic setting ±1°C- Filter Cartridges: 4- Cooling System: Water / Water heat exchanger- Wire Diameter: Ø 0.2...0.33 mm- Standard Wire Guides: Closed guides Ø 0.25 mm- Wire Guide Set: Taper Expert Ø 0.250 mm (for CUT X00/FI X4)- Automatic Threading: Yes- Permissible Wire Spool Weights: 8-25 kg- Generator Type: CLEANCUT- Three-Phase Input Voltage: 380/400 V ±10%- Mains Frequency: 50 or 60 Hz- Max / Required Power: 12 kVA- Min Roughness: Ra 0.2 µm (carbide) / 0.28 µm (steel)- User Interface: AC CUT HMI- Operating System: Windows XP- Display: 15" LCD- Connectivity: E-Connectivity, Ethernet, USB- Operating Ambient Temperature: 15...30 °C (20 ± 1 °C for optimal precision)- Max Relative Humidity: 40...80%- Compressed Air: 6-7 bar

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Dsdeufr H Aepfx Apbeku

Year of construction: 2000, condition: good (used), Brand: SICA Type of machine: Planetary saw Model: TRC/S/SY/U 63-400 Year of manufacture: 2000 Dedpfexu I Szsx Apbjku

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Dkjdpfxsz Apc Ro Apbju Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: ready for operation (used), Year of construction: 2023, spindle motor power: 70,000 W, spindle speed (max.): 14,000 rpm, travel distance X-axis: 450 mm, overall weight: 32,000 kg, controller manufacturer: SIEMENS, controller model: 840D solution line, number of axes: 5, This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details. • Control: Siemens 840D solution line (NCU 720.3), OP19 touchscreen + Siemens TP700 touch panel • Simultaneous machining: 5-axis; B‑axis turning • Workpiece capacity: max length between centers 4,000 mm; max diameter for milling 180 mm; chuck size Ø260 mm • Power supply: 3 × 400 V / 50 Hz; main fuse approx. 200 AAxes • X: travel 450 mm; rapid 20 m/min • Y: travel −80 / +150 mm; rapid 20 m/min • Z: rapid 25 m/min • B: swivel range ±45°; max swivel speed 90°/s; clamping torque 5,000 Nm • C: max speed 50 rpm; max torque 1,740 Nm (cont.) / 2,580 Nm (40% duty) • W (tailstock slide): rapid 15 m/min • VZ1 / VZ2 (steady rest slides): rapid 15 m/minTurning / Milling Unit • Unit: UFE-400; tool spindle: MDFK • Power: 45 kW (continuous) / 70 kW (40% duty) • Max spindle speed: 14,000 rpm; nominal speed: 1,560 rpm • Torque: 275 Nm (continuous) / 430 Nm (40% duty) • Tool interface: HSK 100‑T (compatible HSK 100‑A / HSK 100‑T); additional interface: Capto C8 • Internal coolant: 80 bar; 20 l/minTailstock • Hydraulically operated quill; diameter 190 mm; stroke 200 mm; Morse taper MK6Machine equipment / configuration • Front and rear self-centering steady rests; independently CNC-positionable • 2 prismatic steadies for screw milling • Steady jaw ranges: 15–30 / 30–65 / 65–140 / 140–200 mm • Hydraulic SMW KNCS‑N 260 power chuck with quick jaw change • Central lubrication system • Fully enclosed machine housing with driven safety doors; Visiport inspection windows • Hydraulic and pneumatic systems • Coolant and oil mist extraction preparation • Electronic hand control for B/C/X/Y/Z axesSoftware / control functions • Siemens Safety Integrated; Profibus / Profinet; OPC UA interface Djdpfx Aez D Efhepbjku • 5‑axis simultaneous machining; B‑axis turning; TRANSMIT / TRACYL • Temperature compensation X/Y • DNC remote diagnostics; WMDS Diagnostic System; Telediagnosis capability • weinCAD EXTRUDER DESIGNER; WeinEXT – Praxis Additional equipment • Hinge-belt chip conveyor • Coolant filtration system KF 200: 1,400 l tank; 40 µm filtration; high‑pressure pump 80 bar / 46 l/min; low‑pressure pump 13 bar / 160 l/min; automatic oil skimmer • Oil mist extraction unit: airflow approx. 4,000 m³/h • Operating platform with stairs and railing