Used Zschokke Hap 063A - 4/6 for sale (83,353)

Condition: used, Zschokke HAP 063a - 4/6 - Hydraulic press brake - Year of manufacture: 1967 Technical data - Max. bending force: 630 t - Max. oil pressure: 400 bar - Distance between uprights: 4100 mm - Max. bending length: 6000 mm Kodpfxozf Hnie Acponc - Overhang: 375 mm - Stroke (adjustable): 0 - 500 mm - Distance between tool clamping surfaces: 300 - 800 mm Hydraulic pumps: - Main pumps: 2 x 22 kW - Delivery rate at idle: 2 x 153 l/min - Delivery rate at full load: 2 x 33 l/min - Control pump: 0.75 kW Installation: - Footprint (W x D): 6960 x 3250 mm - Height above ground: 4100 mm - Undercarriage, front: 2200 mm - Undercarriage, rear: 600 mm - Operating voltage: 3 x 400 V / 50 Hz - Machine weight: 51000 kg

Condition: good (used), Year of construction: 2005, machine/vehicle number: 7053055966, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, pressing force: 160 t, stroke length: 175 mm, table length: 4,050 mm, oil tank capacity: 150 l, total length: 5,000 mm, total width: 2,170 mm, total height: 2,800 mm, overall weight: 11,620 kg, Equipment: CE marking, documentation/manual, safety light barrier, The press brake would be available starting in October/November. Please feel free to contact us if you require any further information. Kodpfx Acezc H Apopjnc

Condition: used, Year of construction: 2023, functionality: fully functional, OMEGA ALLPRO 90 (2023 model) - FOLDERF-GLUER Knedpfx Acozlqzgopoc - Microbox device - Servo motors on the feeder and stacker - Remote control - Left and right-hand side-register sections - Retractable center carrier in the final folding section - Third carrier in PF1 and PF2 - Camera at the feeder to monitor the delivery section entry - Motorized carriers with positioning readout - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Air-assisted folding system for crash-lock bottoms - Safety pull-cords - ERO cold glue system (3 guns + side glue wheel with reservoir)

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Omega 130 folder-gluer - 4- 6- corner - ALLPRO 130 (2016 model) - Camera at the feeder to monitor the entry to the delivery section - Vacuum feeder - Servo-driven feeder - Left and right side-register sections - Remote control - Motorized transport belts - Motorized upper carriers for heavy materials Kodpfx Aezlqwzecpjnc - Electronic servo system for 4- and 6-corner boxes - Pneumatic aligner for micro-flute crash-lock bottom boxes - eWON Flexy for OPC UA data sharing - Safety pull-cords - LAMBERTONI hot-melt gluing system (2 guns) + side disc with cold glue pot - Option to install a ZATOR cold-glue system (4 guns) without pump and encoder

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake Kedpfjzrzt Hsx Acpsnc - With DELEM CNC control unit * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Condition: like new (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, Equipment: documentation/manual, M&R RADICURE D 36/6-4R little used, like new Kedpfx Aswaa Tdocponc

Condition: like new (used), Year of construction: 2020, Technical data: Working width: 2050 mm Max. bending capacity (mild steel St40): 6.0 mm Max. pre-bending (mild steel St40): 4.0 mm Top roll diameter: 170 mm Kodpfxsyzc Iaj Acpenc Side lower roll diameter: 170 mm Central lower roll diameter: 145 mm Cone bending device Hardened rolls Working height: 800 mm Mobile control panel Hydraulic drop-end bearing CE marking Motor power: 2.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very good, almost as-new condition, very little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology and wear are age-appropriate; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence Knsdpfjzrvdgjx Acpoc - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: ready for operation (used), Year of construction: 2006, GUK folding machine FA 50/6 FA 52/4, year of manufacture 2006, equipped as follows: – Flat pile feeder FA 50 – 1st station FA 50 with 6 folding pockets, double pre-mounted knife shaft, top segment rollers, HHS cold glue 1 head, HHS hot glue with 2 heads, and transfer table. – 2nd station FA 52 with 4 folding pockets and transfer table, hydraulically height-lockable. – Knife shaft station SM 52 with 4 knife shafts, hydraulically height-adjustable. – Shingle delivery SM 52 – Vacuum/blast air pump Kodpfx Acjx Enduopsnc – Window folding pocket – Various spare parts

Condition: ready for operation (used), Round pile feeder MC Digital control 1st unit 6 plates 2nd unit 4 plates Ksdsq Ik Ruopfx Acpenc A76 stream delivery

Condition: good (used), Year of construction: 2000, working width: 900 mm, total width: 1,800 mm, total length: 12,000 mm, total height: 3,550 mm, overall weight: 8,000 kg, For sale: Konig combi bread line 8/7/6/4 rows Includes: - TRO 240 hopper with oiling system - Konig Industrie Rex head machine Model A - Spreading conveyors - Proofing cabinet model: KGV V L Type: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Stamping unit - Long roller - Seed station - Drop tables (8/7/6/4) (4 different drop tables with various belts included) - Storage trolley for the drop tables - Storage trolley for the flour sprinklers - Spare parts - Control cabinet - All documents and electrical diagrams Weight range: 20 to 30 grams up to 110 grams Output: 18,000 / 24,000 pcs per hour Working width: 900 mm New drum in the Industrie Rex Many spare parts such as spreading belts, etc. Ksdpfx Aexnb Iijcpsnc It is possible to inspect the line on site. We can carefully load the line onto a truck/container. Do you have comments or questions? Please feel free to contact us. Best regards, Leo Holland

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, MORGAN RUSHWORTH GUILLOTINE MODEL HSG 4100/6 4100 X 6 MM CAPACITY ELGO TOUCH AND GO BACKGUAGE GUARDS FRONT AND REAR FRONT SUPPORTS SQUARING ARM BLADE GAP RAKE ADJUSTMENT Knjdpfx Acjz Ehr Tjpjc WONDERING FOOT PEDAL YEAR 2007 MORE PHOTOS ON REQUEST

Condition: ready for operation (used), Machine in good operating condition Kedpfx Aey Rnnqjcponc

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Knedpfx Acszbcwmopjc Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Offer includes: Ti52 with 6 pockets, 2nd station with 4 pockets, Tremat feeder, very good condition, year of manufacture 2009, including SAK-52 stacking device, VFZ52 available as an option. Kjdszmp Nropfx Acpjnc

Condition: used, functionality: unexamined, Year of construction: 1979, Various used housing parts for SBM-Vöest 10/6/4 Export Kedpfjxv U S Rsx Acpsnc

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Knjdjwkaalspfx Acpec Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage Knsdpfx Ajyngitscpec * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable * Loading platform: 3,750 mm x 2,480 mm * Maximum technical saddle load: 30,000 kg (without using the front axle) * Hydromechanical steering with multi-chamber hydraulic cylinder * Hydraulic lifting and lowering function * 2 support cylinders * Hydraulic differential lock * Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system * Access ladder to the gooseneck * Hydraulic claw locking for the platform or axle * Multifunction quick coupler * Air gun for cleaning the multifunction quick coupler ---- Front 2-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,145 mm + 340 mm / - 260 mm * Additional lifting option for all axles in the front axle assembly * Floor covering: sheet metal Kjdpfez Ivnujx Acpjnc * Additional warning sign holders, mounted on the front axle assembly ----Braking system with TIM Drum brake all-wheel drive air brake system with diaphragm brake cylinders * Automatic load-dependent brake (ALB) (AGS) * Parking brake by means of spring-loaded cylinders * EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE * Socket for EBS on the front end of the gooseneck * Vehicle stability control RSP (Roll Stability Program) ----Flatbed platform, single telescopic * Two external box-shaped outer/inner beams * Height of the outer beams: 300 mm * Carrier width of the outer beams: 730 mm + 120 mm edge strip * Front end with coupling claws * Without floor covering between the two longitudinal beams * (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm * With a separating point * Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm * Including a short, permanently welded-on front ramp * And 1 pair of aluminum ramp wedges, at the front ----Rear 4-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,100 mm + 385 mm / - 215 mm * Floor covering: sheet metal ----Combined excavator-tipping body * (Length x Width) 5,770 mm x 880 mm/1,538 mm * Splash guard with water-absorbing mats on all axles * Aluminum partition sheet in the excavator body, front and rear, plug-in ----Load securing Gooseneck * 4 pairs of threaded sockets M30 * 1 pair of lashing points LC 20000 daN * 2 pairs of lashing points LC 800 daN Front axle assembly * 3 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 1 pair of threaded sockets M36 on the side (16,000 daN) * 1 pair of lashing points LC 20000 daN Loading platform, flatbed * 1 pair of lashing points LC 20000 daN * 3 pairs of lashing points LC 10000 daN * 3 pairs of threaded sockets M 30 * 3 pairs of threaded sockets M30 on the inner beam Axle assembly * 2 pairs of lashing points LC 10000 daN * 2 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN) * 1 pair of threaded sockets M36 in the excavator body (16,000 daN) * 4 pairs of el

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Kedpfxszqfxds Acpsnc

Condition: good (used), Year of construction: 1984, Multi-spindle head, multi-spindle drilling head, drilling gearbox -Multi-spindle drill head with: drive -Drive geared motor SEW Eurodrive type: RF40DT80K4B -Power: 0.55 kW -Speed: 165 rpm -max. x: drill bit -4x built-in drill bits Collet: mm -Drilling pattern can be adjusted -Dimensions: 1115/150/H300 mm -Weight: 55 kg Knjdpodz A Tpofx Acpoc

Condition: used, Falzmaschine / Folding machine Heidelberg TD66/6-4-4 Year 1998 Round Pile Feeder  Folding Type 6 - 4 - 2 buckles Press Delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram Kjdozzyg Repfx Acponc On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Round pile feeder 1st unit 6 plates 2nd unit 6 plates 3rd unit 4 plates Ksdpjtcx Iqofx Acpenc Heidelberg TSH twin stacker delivery

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00726, load capacity: 6 kg, arm reach: 810 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB140T-6/0.8 manufactured in 2012.02. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB140T-6/0.8 Model Number: IRB140 Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 6 Reach (mm): 810 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 98 Kjdpfez Uxk Tox Acpsnc   Controller: IRC5 Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00715, load capacity: 6 kg, arm reach: 810 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB140T-6/0.8 manufactured in 2016.10. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB140T-6/0.8 Model Number: IRB140 Year of Manufacture Robot: 2016.10 Ksdpfx Acez Uznhspsnc Warranty term (months): 12   Payload (kg): 6 Reach (mm): 810 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 98   Controller: IRC5 Year of Manufacture Cabinet: 2016.10 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15