Screw-shaft-shredder

Malin Svedala Iggesund Malin 500x1700

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Kdjdpfxsvca Rcs Am Esk Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Construction features: - Large loading opening for cardboard - Possibility of automatic feeding (e.g. via conveyor) - Manual tying with wire (4 wires) - Pallet lock and hydraulic doors for bale removal Kjdpfora Dddex Am Ejdk Advantages of this press: - Large bales, fewer transports - High pressing force - Designed for continuous operation Available years: 2016–2020 Baler from 2016 without tipper

Condition: used, Year of construction: 2007, TECHNICAL DATA Travel X 760 mm Travel Y 510 mm Travel Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Kedpfx Aowud Afsm Eodk Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 116 h, load capacity: 4,000 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Kedjv Ezt Djpfx Am Eedk Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% 3rd valve, 4th valve, heating, full cabin, CE certificate, Specifications: -Carrying capacity 4000kg -Lifting height 16,4m -MAX gradeability 40% -Curb weight 13040kg -Engine KUBOTA 85,1kw ( 114hp ) -Capacity 3769cm3 -Emission standard Tier4f -Steering Front wheel steering, all wheel steering and crab steering.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Kdsdeuu Upgopfx Am Ejk Inspection and trial operation are possible.

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No Kdodpfx Aoxan Utom Eok - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Separate control cabinet Ritta Side passages Ksdpfx Ametiwgis Esdk Ground level installation

Condition: new, functionality: fully functional, 8X4 (2.4 X 1.2M) DOUBLE DECK SCREEN 2.2KW DRIVE MOTOR WEIGHT 1800KG LENGTH 5000MM Kdjdpfjin E Hqjx Am Esk WIDTH 2000MM HEIGHT 2300MM 4.5M FINES CONVEYOR 3KW GEARBOX DRIVE GASOLINE 8.5KW ONBOARD GENERATOR AGRI OR ROAD LEGAL WHEELS Worldwide delivery available, dealer enquiries welcome,

Condition: like new (used), “Hazemag Universa 1620” for Sale Ksdpfx Asggflvjm Eedk Manufacturer: Hazemag Type: Universa 1620 Rotor size: 1.600 x 2.000 mm Inlet size: 2.500 x 2.000 mm

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Kedpjyq Rpcofx Am Eodk Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 132612 Spindle Working: 68009 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200