Manitou PT2000 Lier | 2018

Manitou PT2000 Lier | 2018

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch). Hfodpfotp Dhpsx Apneg  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 1995, Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg Hfjdpob A Ny Eofx Apnjg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 Hfodpfxew Ryxms Apnjg - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working width: 1,300 mm, working height: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Blade drive 11 kw Hydraulic drive 3.7 kw Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Hodpfx Apotv E Hconofg Machine Data: Model H1300 Year of Construction 1982 Built in Japan

Condition: good (used), Year of construction: 1999, Technical specifications Hedpfxov Tzxve Apnefg Ø: 1100 mm Rectangular: 1300 x 1100 mm

Condition: ready for operation (used), Rotational speed: 37-1900/min, an inspection is possible. Hfsdjqvnmfspfx Apnsg

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Hjdpjwuqbbjfx Apnofg Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Year of construction: 2000, condition: good (used), Technical Specification Punching/Shearing system Material * flatsteel length : 6.000 mm Hfodjq Hu H Rjpfx Apnsg width : 50-500 mm thicknes : 5-30 mm * angle steel length : 12.000 mm width : 50 x 50 — 150 150 mm thickness : max. 15 mm Punching Machine VPO 1400 Capacity : 1400 kN (140T) Punch diameter/material thickness (max): 32 mm/25 mm Punching in flat- and angle steel : yes Number of punches for flat steel : 4 Number of punches for angle steel : 1 Hydraulic clamping : yes Centring points : yes Mist lubrication system : yes Shear for Flat Steel VPS 1800 Capacity : 1800 kN (180 ton) Width/material thickness (max) : 500 mm/22 mm Hydraulic clamping : yes Mitreshearing : +/- 45° Shear for Angle Steel VHS 1800 Capacity : 1800 kN (180 ton) Suitable for Angle : 50x50x5 up to and included 150x150x15 Hydraulic clamping : yes Punching Unit for Angle Flange Capacity : 600 kN (60 ton) Punchdiameter/material thicknes (max.) : 32 mm / 15 mm Numbering Unit Number of disks : 4 pcs Number of characters : 36 pcs Character hight : 10 mm Number of characters per code : standard max. 16 Inprint : approx 1 mm Electrical power : 3 x 415V AC + N + PE, 50 CPS

Condition: good (used), Year of construction: 2003, Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, Horizontal band saw, Automatic band saw type C-916A -Cutting dimensions (flat): approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw blade speed: continuously adjustable, 15 - 120 m/min -Engine power: 3 kW -Saw blade: approx. 4014 mm -Coolant system: present -Dimensions: 2080/1400/H1390 mm Hfjdpfxjh Ra Hks Apnsg -Weight: 670 kg

Condition: new, Year of construction: 2026, Plasma sheet cutting, combined with drilling and tapping Heavy-duty gantry type cutting system combined for drilling, plasma and oxy-fuel cutting applications. Double-side drive, precise positioning system with rack and pinion on 3 linear axes and zero-backlash on the torch rotational axes. Reinforced construction of the gantry and drives to handle the heavy load during drilling applications. Low backlash, precision gears, as well as highly rigid and precise rail guiding system enable the smooth motion and excellent cut quality in corners and small holes. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 500 mm KEY FEATURES: ▪ Fully automated technology for program creation and execution ▪ Program based on 2D part drawing ▪ Drill / tap operations assigned to single or multiple holes with the same diameter ▪ Automatic part nesting and rapid moves between holes and parts with different strategies ▪ Automatic tool change, fully programmable, no operator intervention needed ▪ Single program zero position for the complete drill and plasma cut processing in a single program. Just as normal sheet cutting process, no special settings or procedure required from the operator ▪ Automatic measurement of distance from the drill tip to the material. No measurement by operator needed ▪ Automatic tool cooling on-off control ▪ Chip -breaking drill head motion control with programmable parameters ▪ Automatic program head control ▪ Drill head moves to safe position automatically after drilling is done ▪ Plasma head automatically moves to start of cut position, searches the plate and starts cutting ▪ Plasma head moves automatically to safe position after plasma cutting is done Hodpfx Apoh I Eitenefg ▲ DRILL HEAD up to 29kW max. drill tool diameter 40mm ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days