Screw compressor

MANNESMANN DEMAG Sprint 025

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Ljdpfx Aewwlk Nenxsag

Condition: excellent (used), Year of construction: 2021, Cutting centre for standard profiles, as well as lift-and-slide door frames and thresholds, Thorwesten ASZ 3.2M in a special design. Processing length 6,500 mm for standard profiles and the Veka 82 system for lift-and-slide door frames and thresholds. Equipped with extended infeed and outfeed. Lifting and guide rollers located under the drive belts ensure smooth transport of sliding door frames. Stepless cutting angle adjustment from 22.5° to 157.5°. Automatic optimisation and processing of off-cuts. Saw blade diameter 500 mm. Includes dust extraction system and waste conveyor. Lasdpfxezhi Nhe Anxog Configured for the Veka profile system, including widening options and special profiles. Full HD panel with Windows 10 operating system.

Condition: new, For sale: a stock of new engines, approximately 1,500,000 kg. Sale in batches. Minimum order quantity: 50,000 kg. Laodpszgu D Isfx Anxeg All engines are either new or used, but refurbished. Approximately 3,000 units. Various manufacturers: Siemens, ČKD, MEZ, etc. Price per 1 kg: 1.50 EUR.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Thorwesten PBZ3 machining center for optimized processing of profiles. Lasdpfx Aozfvf Rsnxjg The tool carousel enables variable angles for all tools. All machining operations – milling, drilling, and screwing – are performed in a single pass. A dynamic screwdriver reduces processing times.

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Ljder A El Espfx Anxjag Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: as good as new (ex-display), For sale Hoist motor used/reconditioned Ledpfxeh Up Tbo Anxjag for a DH wire rope hoist NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: used, mileage: 1,001 km, first registration: 01/2009, color: red, driver cabin: other, gearing type: other, Year of construction: 2009, Vehicle location: Bovenden, emergency stop, foldable, 2-point hydraulic outriggers, 1x hydraulic extension Load diagram: 2m-3000kg, 2.3m-2610kg, 3.5m-1900kg, 3.8m-1650kg, 5.4m-1160kg! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Laedetd Hffspfx Anxeg - .

Year of construction: 2008, condition: not inspected (used), Emergency power generator Geko 6401 ED-AA/ZEDA, year of manufacture 2008, 2050 operating hours, diesel, 220/400 volts, serial number 100821, engine runs but does not generate electricity. Lsdpfjgqfxrsx Anxjag

Condition: used, Year of construction: 1997, feed pressure 10 bar Ljdpfx Ajid S Tronxsag liter capacity 1500 l Number of working hours 5111 h total power requirement 11 kW weight of the machine ca. 250 kg

Condition: new, Year of construction: 2018, functionality: fully functional, CHILLER – AS GOOD AS NEW!!! Lodpewc I S Tofx Anxoag Manufacturer: Piovan Type: Aquatech CH50 Year of manufacture: 2018 Connection power: 4.1 kW Cooling capacity: 7 kW Refrigerant: R407C The unit is practically new – only used for testing! PRICE REDUCED FROM 4250 TO 3650 EUR