Mulcher
McConnel Robocut T500

Name: McConnel Robocut T500
Brand: McConnel
Availability: InStock

Year of construction

2025

Condition

New (fully functional)

Location

Echt

Show map

Machine data

Machine type:: Mulcher

Manufacturer:: McConnel

Model:: Robocut T500

Year of construction:: 2025

Condition:: new

Functionality:: fully functional

Price & Location

Location:: Galvaniweg 10, 6101 XH Echt, Nederland

Call

Technical details

Maximum speed:: 7 km/h

Color:: yellow

Overall weight:: 1,500 kg

Equipment:: lighting, onboard computer

Details about the offer

Listing ID:: A17711568

Update:: 06.01.2026

Description

McCONNEL ROBOCUT T500

DEMONSTRATION UNIT

- Remote-controlled embankment mower.
- Low weight, low center of gravity located in the middle of the vehicle.
- Active track drive with 4 movable lower rollers and 1 upper roller.
- Hardened gears on the drive side.
- Front track guidance with guide blocks.
- External rubber tracks: 250 mm wide.
- Rubber tracks with deep grooves, A/S tread profile.
- Hydraulic track tensioning via grease gun with pressure gauge.
- Removable belly plate.
- 3-cylinder Perkins diesel engine, 37 kW / 50 HP.
- Basic machine weight (without attachments): 1250 kg
- Fuel tank: 21 liters.
- Oil tank: 18 liters – 28 liters total in the circuit.
- 8 liters SAE J 1036 (or equivalent) coolant in the machine.
- 2-speed fully hydrostatic, stepless drive.
- Travel speeds: 0 – 4 km/h and 0 – 7 km/h.
- 5-position cutting height adjustment.
- Hydraulic lift: -300 mm to +400 mm.
- Flail rotor float function left/right 14 degrees.
- Engine permanently mounted; cannot be rotated.
- Oversized oil sump.
- Engine approved for use on slopes up to 55 degrees.
- Modified lubrication system for incline applications.
- Electronics mounted separately from engine (no vibration impact).
- Cooling system mounted completely at the rear, away from dust and debris.
- Combined cooling system: engine radiator and oil cooler integrated.
- Standard spiral fan, operable via remote control.
- Lamellae rotation via hydraulics.
- Standard machine-mounted safety features with alarm functions:
- Shut off if no oil pressure in the engine.
- Emergency stop function if controls are not operational.
- Blocked filter indicator.
- Overheat warning for engine temperature.
- Oil and diesel fluid indicator.
- The machine is equipped with an emergency control system in case either the unit or the radio remote does not function.
- Brake system on track drive motors; machine is braked when not in operation.
- Low ground pressure.

Hodpfx Acsu Rurusrjl
- VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC.
- STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

The listing was translated automatically. Translation errors are possible.

Documents

17711568-01.pdf

Seller

Registered since: 2020

10 listings online

Call

Send inquiry

Telephone & Fax

+31 475 2... show

+31 475 4... show

Fax:

These listings may also fit your interest.

Listing

Drum Chipper ATH series S&F GmbH ATH 300

Grünkraut

1,237 km

Drum Chipper ATH series
S&F GmbHATH 300

Call

Condition: new, Year of construction: 2026, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces Hjdouz Hmxepfx Acrjl - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

See details

Listing

Piston compressor Honda petrol engine RENNER REKO 550/50VE

Erlangen

1,167 km

Piston compressor Honda petrol engine
RENNERREKO 550/50VE

€1,600

Fixed price plus VAT

Call

Year of construction: 2017, condition: like new (used), used RENNER REKO 550 / 50VE compressed air compressor 10 bar with petrol engine for use without power connection (for example emergency service vehicles of breakdown service or Tire service) The compressor is used, built in 2017 and has 50 operating hours. The gasoline-powered, robust reciprocating compressors not only offer you the usual advantages of the RENNER systems, but also flexibly available compressed air on construction sites, in service vehicles and in many other applications "without power outlets". They guarantee a constant compressed air supply regardless of location. The small version is mobile and quickly offset by the ergonomic handle. Thanks to its compact design, the large version can be easily moved with pallet trucks or forklift trucks and loaded onto vehicles. VE = electric start. Please note: will be delivered without battery Technical specifications: Suction capacity 550 l / min Eff. Delivery quantity 400 l / min Gasoline engine 3.6 kW Honda power unit with 4.8 hp Max. Pressure 10 bar Cylinders / stages 2/1 Speed 1400 rpm Sound level 98 dB (A) Compressed air tank 50 l Dimension L x W x H 810 x 460 x 830 Hjdjd H Dr Sjpfx Acrel Weight 70 kg Visit our shop in Erlangen. We have a large selection of new and used compressors.

See details

Listing

CNC Horizontal machining center OKK HP 500 S

Root

1,232 km

CNC Horizontal machining center
OKKHP 500 S

Call

Listing

Echt

780 km

Arm mower
McConnelPA5035

Call

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection Hodpfx Acsxlf Hwjrol - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

See details

Listing

Stockheim

1,137 km

Debarking machine
Häwa

Call

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 3283, Häwa Round Timber Milling Machine Type 249-193-00 Year of manufacture: 1979, Serial No. 3283, Log diameter: 0.30 - 1.30 m Log length: 2.20 - 6.50 m Connected load: 55 kW Round timber feeding station, log carriage, Hsdpfjxvq Hkjx Acrjl Milling head debarking, scraper chain conveyor with discharge Log sorting system left/right Control panel and electrical cabinets

See details

Listing

Pallet Block Cutter Machine Mychrome OPTIMIZING BLOCK CUTTER OKKR-2006

Malax

1,643 km

Pallet Block Cutter Machine
MychromeOPTIMIZING BLOCK CUTTER OKKR-2006

Call

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Thickness min / max: 75 mm - 100 mm Specifications Hodowdutmepfx Acrol Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.

See details

Listing

Multisaw DEMAK, Cosmec, SCM, GABBIANI 400 26/22

Naprawa

1,693 km

Multisaw
DEMAK, Cosmec, SCM, GABBIANI400 26/22

€25,470

Fixed price plus VAT

Call

Condition: used, Technical data: Track width: 400 mm Max cutting height: 150 mm Max saw blade diameter: 450 mm Min element length: 700 mm Smooth feed regulation Automatic lubrication system Antireflection protection Extraction port: 300 mm Safety switch Power supply: 380 V Hodpfoh Tkbksx Acrel Main engine power: 55 kW Overall dimensions: Length: 2000 mm Width: 2120 mm Height: 1860 mm

See details

Listing

Low-loader semi-trailer for transporting construction machinery BERTOJA BERTOJA

Caivano

2,064 km

Low-loader semi-trailer for transporting construction machinery
BERTOJABERTOJA

Call

Condition: new, functionality: fully functional, BERTOJA SEMITRAILER 13.80m NEW, READY FOR REGISTRATION Double galvanized hydraulic ramp Edge rail on neck Winch preparation Self-steering axle CONTACTS: Hedpfx Acexpi A Rerol 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM - 7:00 PM / SATURDAY 8:30 AM - 2:00 PM WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL AND INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semitrailer-Refrigerated Semitrailer Tipper – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Trilateral - V8 - Scania - Frost Edition Curtain Sider-Box body-Liftgate - Refrigerated Cell- Insulated with Fridge - Van Domenico Truck srl declines any responsibility for any discrepancies in technical specifications, options, and features, which may in some cases differ from those described. We invite you to verify the specifications of the specific vehicle.

See details

Listing

Mindelheim

1,258 km

Horizontal band saw
MIOTAL®S 125 G

€499

Fixed price plus VAT

Call

Condition: new, Cutting capacity round 0°: 127 mm Cutting capacity flat 0°: 125 x 130 mm Cutting capacity round 45° right: 90 mm Hedpfxjilk Eko Acrjl Cutting capacity square 45° right: 90 x 90 mm Cutting capacity round 60° right: 45 mm Cutting capacity square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor output: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw bow swivels up to 60° - Ideal for cutting tubes, profiles, and solid material made of stainless steel, iron, etc. - Sturdy saw arm for low-vibration operation - Low-noise due to robust construction - Automatic shut-off after cutting cycle via microswitch - Quick-release vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Environmentally friendly—no need for lubricants or coolants - Lightweight design makes it ideal for use on construction sites - Base frame available as an optional extra (not included in delivery) Includes: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available for an additional charge: 129 Euro (net, special price)

See details

Listing