Used Mcconnel Robocut T500 for sale (182)

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. Dkjdpfxju Ruruj Akijp - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Dkedpoxlf Hwsfx Akisp Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 5,000 mm, color: black, Equipment: lighting, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2100 kg. Driven via PTO shaft at 540 rpm. - Maximum horizontal reach: 5.00 m - Tractor-independent hydraulic system (46 l/min, 210 bar) incl. PTO shaft - Hydraulic collision protection - Hydraulic boom rotation - Floating position for boom - Floating position for mower rotor Dkodpfxsx R Ul Ne Akiop - Stabilization kit for three-point linkage - Electric proportional control with single joystick NEW machine, year of manufacture 2025

Condition: used, Year of construction: 2004, functionality: limited functionality, machine/vehicle number: N07/09, !!! SALE TO THE HIGHEST BIDDER !!! MBO Folding Machine T500-1-500/4F – 4 Buckle Plates – Industrial Folding Machine Dsdpfx Aeyuc Ryjkiekp For sale is a folding machine manufactured by MBO Group, model T500-1-500/4F. This machine is ideally suited for print shops, lettershops, and finishing operations for the folding of brochures, leaflets, inserts, and other printed products. The robust construction of MBO folding machines ensures precise folding results, high reliability, and durable industrial quality. The buckle plate system enables a wide range of fold types to be carried out quickly and efficiently. Technical Data Manufacturer: MBO Group Model: T500-1-500/4F Machine Number: N07/09 Wiring Diagram: 35.1901.14 Folding System: Buckle Plate Folding Machine Number of Buckle Plates: 4 Max. Working Width: approx. 500 mm Application Area: Folding of printed products Possible Applications Brochures Flyers Inserts Folders Multi-page printed materials Condition Used, condition appropriate to age. Inspection Inspection of the machine possible by appointment. Further information available upon request.

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW Dodjif Sbiopfx Akijkp -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Condition: used, Year of construction: 2000, Wire erosion / EDM Dksdpsyk H Egefx Akijp Travel distance X: 520 mm Travel distance Y :370 mm Travel distance Z: 310 mm max. workpiece size X: 790 mm max. workpiece size Y: 730 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg table size X: 600 mm table size Y: 400 mm with AWF ( Automatic Wire Feeding ) U / V axis: 120 / 120 mm generator: 45 Ampere submerged cooling unit Perfect for precise EDM applications.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 4,439 h, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, overall weight: 4,200 kg, controller manufacturer: FANUC, controller model: 31i-WB, product length (max.): 2,900 mm, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis FANUC ROBOCUT alpha C800iB was manufactured in 2016, featuring a large work area with X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 310 mm. It supports a maximum workpiece weight of 3000 kg and utilizes a CNC control FANUC 31i-WB for precise operations. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT alpha C800iB machine we have for sale. Contact us for more information. • Work area / travels: • U-axis: 200 mm • V-axis: 200 mm • Rapid traverse rates: • X-axis: 2000 mm/min • Y-axis: 2000 mm/min • Z-axis: 900 mm/min • U-axis: 450 mm/min • V-axis: 450 mm/min • Workpiece capacity: • Maximum workpiece dimensions: 1250 × 975 × 300 mm • Maximum workpiece weight: 3000 kg • Wire EDM parameters: • Maximum wire weight: 16 kg • Maximum taper angle: ±30° / 150 mm • Minimum positioning increment: 0.0001 mm • Machine data: • Permissible workpiece mass: 3000 kg • Electrical data: • Power supply: 3-phase, 50/60 Hz • Connected load: 13 kVA Dsdex Nr N Aopfx Akiskp

Condition: ready for operation (used), Fanuc A06B-0730-B200 30P servo motor SN WN104700 + A290-0731-T500, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please enquire for price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dksdpfsrrqf Rox Akijp

Condition: used, Year of construction: 2003, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, CNC wire EDM machine Fanuc, type Robocut Alpha O I B, year of manufacture 2003. Travel of XY axes: 320 x 220 mm. Travel of UV axes: plus/minus 60 mm. Z-axis adjustment: 180 mm. Clamping area: 530 x 360 mm. Maximum workpiece height: 180 mm. Internal space: 70 x 430 mm. Maximum workpiece weight: 500 kg. Djdpfeyankpex Akiekp

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 370x270x255 [mm] - Travels on U/V axes : [mm] - Max. taper : +/-30/80 [°/mm] PART - Max. part dimensions : 700x600x250 [mm] - Max. part weight : 500 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] Dkodpfx Akoxqrqasijp POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1930x2330 [mm] - Machine height : 2270 [mm] - Machine weight : 2165 [kg] MACHINE HOURS - Number of working hours : 15874 [h] EQUIPMENT - CNC : Fanuc 31i-WA - Cooling unit - Filtration unit

Condition: used, TECHNICAL DETAILS - part maxi dimensions : 650 x 420 [mm] - part maxi thickness : 160 [mm] - maxi weight : 350 [kg] - strokes (X,Y,Z) : 320 x 220 x 180 [mm] - table traverse speed : 900 [mm/min] - wire unrolling speed : 0 - 10 [m/min] - wire tension : 80 to 2500 [gr] - wire guide : Ø 0,25 [mm] - tank capacity : 260 [l] - dimensions : 3 200 x 2 200 x 2 000 [mm] - weight : 1 900 [kg] EQUIPMENT - CNC FANUC 16W control Dsdpfsuhcbcox Akiekp - cooling unit - cooling tank with pump - automatic threading

Condition: good (used), Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat pile feeder, counter, in good condition, immediately available. If you are interested, we will also be happy to provide you with information about other machines in our inventory. Dodpehb Ep Iefx Akiokp You are welcome to inspect the machine at our facility after prior arrangement.

Condition: not inspected (used), functionality: unexamined, Folding machine T500/4 without second folding unit, without delivery unit Dodpfxerqf Sxj Akiskp

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Dsdpfxsyxprts Akiokp

Year of construction: 2025, condition: new, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 5kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 5kN) • Accuracy class 0.5 • Windows based software Djdpfxed H S Rrj Akijkp • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: compression platens Screw and wedge grip bending fixtures Special designs according to customer specifications • extensometer / strain gauge: • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • Commissioning into operation and training

Year of construction: 2022, condition: new, The carrier unit allows the operation of a wide range of equipment, such as cone splitters, earth augers, root grinders, sweepers, rotary harrows, and much more. The equipment is developed and manufactured in Germany. Very robust roller bearings ensure that the forces are safely absorbed in both axial and radial directions. A large, high-performance hydraulic motor, type HMT500, provides the necessary torque for powerful and efficient operation, with up to 1600 Nm. Oil flow rate up to 125 l/min, pressure up to 210 bar, and speed of 240 rpm. Dsdpfx Ajdf Sgrskiskp Article no.: MTT500 Earth augers, drill cones, and other tools are available on request for an additional charge. Quick-change mounts MS 01 - MS03 - MS08 or other adapters are also available on request and for an additional charge.

Condition: used, Year of construction: 2003, machine/vehicle number: 17555, Falzmaschine / Folding machine MBO T500/4-4-SE500 Baujahr / Year 2003 - Serial-No. 17555/1 Flachstapelanleger / Flatpile Feeder Dodpfx Asuahzrskiekp Falztyp 1. Station 4 Taschen - 2. Station 4 Taschen Folding Type 1. Station 4 Buckles - 2. Station 4 Buckles Schuppenauslage / Stream Delivery Inklusive Kompressor / Include Compressor Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), overall weight: 1,200 kg, fuel type: diesel, Year of construction: 2013, operating hours: 1,127 h, MC Connel Robocut / Energreen Robogreen Radio-controlled mowing crawler / large-area mower / embankment mower Dodpfx Aew A Nn Ajkijkp Technical information according to manufacturer: - 40 HP 3-cylinder Isuzu diesel engine - 2-stage hydrostatic drive (0–4 and 0–7 km/h) - Emergency stop - Slope capability up to 55 degrees - Hydraulic output for mowing rotor (L/min): 50 - Working pressure (bar): 200–350 - Autec model control system - Machine weight incl. attachment (kg): 1040 Attachment: HEAD-130 - Flail mower rotor with 1.30 m working width including floating position, fitted with Y-blades - Mowing rotor weight (kg): 160 - Flail rotor speed (rpm): 3000 This Energreen Robocut was manufactured in 2013 and, according to the meter, has 1,127 operating hours. It is in very good overall condition, showing the typical signs of use and wear for this class of machine. Recently serviced with major maintenance and extensive overhaul. Sale as a used machine, excluding return, warranty, and guarantee. Net price: €32,500 // Gross price: €38,675 - Viewing and test drive possible by arrangement - Nationwide shipping can be organized; costs depend on distance - Financing and leasing can be arranged individually

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Dkodpeyhhuwofx Akisp Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Dkodpoul Uwljfx Akisp Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg Dsdpoxfaqkjfx Akiskp X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Condition: good (used), Year of construction: 2007, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, saw blade speed: 2,800 rpm, input voltage: 400 V, rotational speed (max.): 2,800 rpm, saw band length: 500 mm, main saw diameter: 500 mm, saw blade length: 6,000 mm, Double automatic aluminum saw with 500 mm blades. Cuts materials up to 6000 mm in length. Can automatically cut an entire profile into smaller pieces. Length, cutting angle, and material thickness are electronically adjusted on the machine. The saw system is in perfect working order. For sale due to production shutdown. We are happy to assist with loading the machine onto the buyer's truck. Dksdsx U Df Hjpfx Akiep

Condition: good (used), Welding rotary table KT 500, with 100 mm through-hole Load capacity, horizontal: 500 kg, tilted: 250 kg Power supply: AC 380 V, 50 Hz Rotary motor: AC 400 W Table diameter: 700 mm Height: 700 mm, width: 800 mm, length: 800 mm Weight: 155 kg Djdpfxob U Have Akijkp Tilting range, continuously adjustable electrically: 0 – 90° Speed: 0.3 – 2.5 rpm Welding current transmission, max.: 500 A Includes: hand-held remote control, foot-operated remote control Optional extra: Quick-release chuck Diameter: 400 mm, €530 CE marking/approval

Condition: good (used), MBO T500F Folding Machine Machine in very good condition, ready to work. Minimum paper size: 105 x 150 mm Dsdpozaz Sasfx Akiokp Maximum paper size: 520 x 720 mm High stack feeding 4 cassettes with micro-adjustment and cutting Casket and compressor noise reduction Electronic counter with batching Electric delivery Machine in very good condition, ready to work.

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Dsdpfsrft Nzjx Akiskp Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures