Minibus

MERCEDES-BENZ eVito Elektro 9 Sitzer Automatik Klima

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 31 h, 3D Coordinate CNC measuring device Profitech Innometrik Advanced in gantry design (demo unit at a special price) Open Cable Special features of the gantry design: Gantry design with a low center of gravity, wide bearing separation and optimum stiffness to mass ratio. The granite guideways ensure a uniform thermal, dimensional, torsional and geometric stability of the machine. 24 air bearings for smooth movement of the three axes. High dynamics for better performance, the machine can achieve high accelerations like comparable medium and large CMMs. Thermally compatible materials and components minimize the influence of ambient temperature fluctuations on measurement results, Air filter and regulator. Z-axis pneumatic counterweight system. Granit table with thread inserts of size M10. Passive vibration isolation pads Technical specifications Hjdpfxedyah Sj Addong Measurement paths: X: 500mm Y: 600mm Z: 400mm Max workpiece weight: 250kg Weight of the machine: 850kg Dimensions over everything: 1290x1160x2350mm Accuracy according to DIN EN ISO 10360-2 or ISO 10360-4: Volumetric probing deviation: MPEP = 2.2μm Volumetric length measurement deviation: MPEE = 2.2+ L / 350 (μm) Environmental conditions: Room temperature standard: 18-22 ° C Operating temperature 10-35 ° C Air Supply: Minimum air pressure: 6bar Air consumption: 90NI / min Also configurable as a complete package with touch probe, software commissioning and training. (Annual maintenance & calibration can also be offered)

Condition: good (used), Year of construction: 2018, operating hours: 6,310 h, functionality: fully functional, machine/vehicle number: 112029, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 305 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate Z-axis: 20 m/min, controller model: Brother C-00, table width: 800 mm, table length: 400 mm, table load: 200 kg, spindle speed (max.): 10,000 rpm, coolant supply: 30 bar, distance table to spindle center: 555 mm, distance table center to spindle nose: 625 mm, tool length: 200 mm, tool diameter: 80 mm, power: 26 kW (35.35 HP), Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BROTHER Speedio R650X1 HT machining center, first commissioning 2019 22 tools Hodpjq Hdzbofx Addeng 26KW spindle drive High Torque Spindle holder BBT-30 10,000 revolutions Rotary shuttle table low version 2 pallets 30 bar internal cooling Twin chip disposal system - 2 chip conveyors in one system Emulsion mist extraction for cooling lubricant

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 Hjdpekvpnmjfx Addeng max spindle speed 15000rpm BT30 high cooling through the spindle automatic tool changer 20 tools weight machine 4500kg with machine chip conveyor with pomps low hours machine

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Hsdpfohvi E Iex Addeng Working width (min/max) mm 225 / 2500 Numerical Control NC 21 / HOMATIC Adjustable feeding speed (m/min) 15 - 50 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) LEFT SIDE: Jumping Milling Unit (for grooving) SF 20 (Kw 6,6 x 1) 0°-90° RIGHT SIDE: Free space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "A" (1 + 4 rollers) Snipping (end-cutting) unit HL 04 (2 x kW 0,18) Rough Trimming unit 2 x Kw 0,55 (0°-35°) Multi Function Unit (Profile contour Trimming unit) FK 11 - 2 x Kw 0,4 Profile edge scraping unit PN 20 Glue scraping unit (Pneu) Buffing unit (2 x Kw 0,25)

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Hnjdpfx Asm E I D Hjddsg Lathe spec. Spindle motor 7,5/5,5 kw turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA installation and training not included. ( price depend on loacation and on request)

Condition: used, Year of construction: 2017, turning diameter 290 mm turning length 204 mm control Fanuc 31i - Model B Number of working hours 23850 h number of spindles 2 Stück spindle turning speed range max. 3200 U/min x-travel 230 mm z-travel 250 mm distance between the spindle noses 450 mm spindle nose A 2 - 6 spindle bore 73 mm Hjdpfx Asvuup Djddjng tool turret with 10 work positions 2 x workpiece magazin 14 Stück max. workpiece diameter 200 mm workpiece weight max. 2 x 8 kg workpiece length - max. 120 mm rapid traverse 24 m/min feed - longitudinal/cross 0 - 1260 mm/min spindle motor 15/18 kW Driven tools 3,7/5,5 kW turning speed of the driven tools 4000 U/min. total power requirement 61 kVA weight of the machine ca. 6,3 t dimensions of the machine ca. 3,1 x 2,9 x 3,6 mm Front lathe - Horizontal double spindle machine with gantry loader Raku Raku and workpiece magazine on both sides, C-axis and 10-way turret for both sides with driven tools, more powerful spindle motor, 14-way workpiece pallet magazine. Machine dealer with own stock of 1600 m².

Condition: excellent (used), LINE (half line) of Double-side Sizing-Milling & Edge Banding, with automatic handling system. Composed of the following machines: A) LOADER (Portal) with double station "RBO" Mod. Advantage C 3200 and central motorized rollers table. B) Infeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-1 C) Double-side SIZING and EDGE BANDING machine "BIESSE" Mod. Stream SB2 11.0 Hjdshvah Njpfx Addsng D) UPSIDE DOWN 180° TURNING MACHINE "RBO" Mod. Ribaltatore E) Outfeeding Rollerway, with double-cone TURNING Device "RBO" Mod. GPK-2 F) STACKER (Portal) with double station "RBO" Mod. Advantage SC 3200, with central motorized rollers table.

Condition: excellent (used), FLEXIBLE SYSTEM OF SINGLE-SIDE SIZING-EDGEBANDING (BATCH SIZE ONE) Composed of the following machines: M.01) PANELS HANDLING and RETURN SYSTEM "SIRIO" BATCH SIZE ONE M.02) SINGLE-SIDE RIGHT-HAND SIZE-EDGE BANDER "IMA" Novimat /I/R75/690/R3 Panels thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1300 Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Numerical Control / Software ICOS Open (Batch Size One) Adjustable feeding speed (m/min ) 6 - 30 Panels in-feed system A1 / 15 N° 2 Pre-milling Unit (vertical joint trimmers) adjustable by N.C. 08.378 (4 motors x Kw 4,5) Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B / LS1 (2 x Kw 0,2) 0°-25° Rough Trimming unit 08.055.0.1680 (1 x Kw 0,85) Fine Trimming unit (Multi-profile, adjustable by N.C.) 08.0587 HS/LS1 (2 x Kw 1) Multi-Profile Copying unit by N.C. (fine and contour trimming) KFA x20 (1 x Kw 0,5) 20 m/min Profile Scraping unit (Multi-profile, adjustable by N.C.) 08.516 HS/LS1 Glue scraping unit 08.521 Hnodpfx Ajkt Uuaoddeg Buffing unit 08.617-2 (2 x Kw 0,18) N° 3 Milling grooving unit 08.190 (3 x Kw 4,5) Controlled by N.C. - (90°/180°/270°) M.03 ) PORTAL BRIDGE (UNLOADING/LOADING) "SIRIO"

Condition: excellent (used), Year of construction: 2015, BUSCH Used Hnsdpfspch D Tox Addeg Vacuum pump with control and pressure tank Year of manufacture 2015 Nominal suction capacity 160 m³/h Ultimate pressure 60 hPa (mbar) motor nominal power 4,0 kW Nominal motor speed 1500 min-¹ Noise level (ISO 2151) 70 dB(A) Oil quantity 1 l Weight approx. 240 kg Dimensions (L x W x H) 1040 x 515 x 450 mm Gas inlet G 2" Gas outlet R 1" Two more pumps can be connected to the control unit Pressure vessel from K+B Year of construction 2004 Horizontal 1000L capacity max. allowed temperature 50°C max. allowed pressure -1/0 bar

Condition: ready for operation (used), Manufacturer: Sonny Ultrasonic Tip: 1300 W / 20 KHz Hjdpsh Ri Abjfx Addeng