Used 250 Kva for sale (11,568)

Condition: like new (used), Year of construction: 2006, spindle motor power: 15 W, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Nkedpfox Dbxgjx Aacou Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11 Equipment Chip conveyor Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. Nkjdpfxjl Tnz Ej Aaceu We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Njdpfx Aasym A D Rjcjku Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: used, Year of construction: 2005, clamping force: 25 kN, displacement volume: 440 cm³, injection pressure: 1,550 bar, overall weight: 2,500 kg, load hours: 40,000 h, screw conveyor diameter: 25 mm, terms of delivery: FCA Pegnitz Nkjdpsynbcnofx Aacju delivery time: on request terms of payment: 100% prior to delivery

Condition: used, operating hours: 16,911 h, HITACHI ZX 250 LCN-3 Year of manufacture: 2008 * 132 kW * Hammer line * Quick coupler * Cabin protection grid * Undercarriage approx. 70% Nkedpfx Aexw Apmsacju

Year of construction: 1996, condition: used, For sale 3 transformers 1600 kVA, 1000/800 kVA Manufacturer: Home, Nksdpfjh Eu Rzsx Aaceu

Condition: ready for operation (used), controller manufacturer: Cadman Touch-B, throat depth: 350 mm, installation height: 500 mm, operating speed: 10 mm/s, reverse speed: 80 mm/s, total length: 5,545 mm, total width: 1,990 mm, total height: 3,380 mm, power: 30 kW (40.79 HP), travel distance Z-axis: 250 mm, empty load weight: 23,000 kg, passage width: 3,150 mm, table width: 250 mm, 5 assen: Y1 / Y2 / X / R / V Laserbeveiliging voor en achter CNC-bombering boven- en onderaan LVD-tooling opname Nsdpfeyf Rt Rsx Aacsku Capacity: 250 ton x 4100 mm Backgauge: CNC Locking speed: 80 mm/sec

Condition: excellent (used), Year of construction: 2018, operating hours: 2,444 h, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 2,350 mm, fork width: 550 mm, total height: 1,300 mm, color: other, GVW: 1.170 kg Lifting capacity: 2.500 kg Nksdpfx Aajyki U Docju FUNCTIONS LIKE NEW! NEW BATTERY CELLS 24V 6PzBH 600Ah with central water filling system, 220V high-frequency charger, Fork size 2350 x 550 mm, Load support! Tandem fork wheels, Reconditioned lifting and steering system, Foldable standing platform,

Condition: ready for operation (used), Year of construction: 2016, operating hours: 18,071 h, overall weight: 6,000 kg, number of axes: 3, This 3-axis DMG MORI Gildemeister CTV 250 2nd was manufactured in 2016. Ideal for precision vertical turning, this machine maintains robust construction and reliability. If you are looking to get high-quality turning capabilities, consider the DMG MORI Gildemeister CTV 250 2nd machine we have for sale. Contact us for more information. Additional equipment Nkedpfjx D Nl Isx Aacsu • shopturn option Machine Benefits Technical Machine Benefits • Current: 58 a in max, 63 a • Voltage: 400 v • Frequency: 50 hz • Spindle hours 19113h Extra Information Machine still under power

Condition: used, diameter 315 mm bore 89 mm Nodpfex Edumsx Aacsku Machine dealer with own stock of 1600 m².

Condition: good (used), Column jib crane, overhead crane, workstation crane -Manufacturer: VEB, Column jib crane, lifting capacity 250 kg -Base plate: 440 x 440 mm -Projection: 1,800 mm -Total height: 2,700 mm -Hook height: 2,490 mm -Chain hoist: VEB Type 250F Nedpjha Hvrsfx Aacsku -Main stroke: 6.0 m/min -Fine stroke: 1.5 m/min -Transport dimensions: 2530/800/H440 mm -Weight: 272 kg

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 219 h, load capacity: 25,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,820 mm, fork length: 3,000 mm, drive type: Diesel, Diesel forklift Load centre: 1200 mm Fork width: 250 mm Fork thickness: 110 mm Mast type: standard Technical condition: very good Front tyres type: pneumatic Front tyres size: 14.00x24 Front tyres condition: 80 - 100% Nksdjyig H Sjpfx Aacou Rear tyres type: pneumatic Rear tyres size: 14.00x24 Rear tyres condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, heater, full cab,

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, working width: 2,500 mm, product height (max.): 16 mm, product width (max.): 2,500 mm, Boxmaker SRE max 250 with Eco Feeder (year of manufacture 2012/2015), WITHOUT printing unit Maximum sheet size: 2,500 x 6,000 mm Minimum sheet size: 360 x 1,200 mm Nsdpfx Aaerwi N Aeceku Material thickness: 2.5 to 16 mm (triple-wall corrugated) Scissor lift platform with control: 2,400 x 4,000 mm Wide selection of tools

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS Nkodpfx Aaep T Ulzocou B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: used, power: 138 kW (187.63 HP), fuel type: diesel, Year of construction: 2022, operating hours: 2,278 h, Empty weight: 26.900 kg Nkjdoyix S Aopfx Aaceu Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: new, *AVAILABLE IMMEDIATELY* Including hand pump / all-steel floor Technical Data: • Brand: Martz • Model: KIPPER 250 S • Vehicle type: Rear tipper trailer • Condition: New vehicle • Initial registration: Not yet registered • TÜV inspection: 3 years from initial registration • Internal dimensions (LxWxH): 253 x 152 x 30 cm • External dimensions (LxWxH): 371 x 164 x 111 cm • Permissible total weight: 750 kg • Unladen weight: 323 kg • Payload: 427 kg • Chassis: High-loader (wheels located under the body) Njdpfxox Tbk Ds Aacjku • Tyres: 165/70R13 • Axle: KNOTT rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Double-walled, anodised aluminium side panels • All side panels can be folded down and removed • Removable steel corner posts • Insert sockets at all four corners for fitting tarpaulin frames, mesh sides, side wall extensions, or headboard extension • Plastic tie-down buttons mounted to the side panels for fastening nets or flat tarpaulins • Sturdy eccentric locks • 44° tipping angle • 100 km/h manufacturer approval • Robust full steel floor • Reinforced V-drawbar • Strong welded steel frame • Frame fully hot-dip galvanised by immersion bath • Multiple cross-beams for increased point load capacity • Double-acting hand pump for manual tipping • 6 certified lashing rings set into the side rails (600 DaN/kg) • Unbraked rubber-sprung KNOTT axle • 13-pin plug • Reversing lights • Large, high-visibility safety lighting • Integrated rear fog light • Rear frame lighting recessed for protection • Central jockey wheel Optional extras – On request: • Mesh sides • Side wall extensions • Cover net • Flat tarpaulin • Anti-theft device • Spare wheel • Tool box • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices incl. VAT - Registration documents can be sent in advance or export plates (Germany) can be provided - Export plates including customs registration available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available from stock! We have been authorised dealers and service partners for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Subject to errors, omissions and prior sale -

Condition: good (used), mileage: 352,900 km, power: 188 kW (255.61 HP), first registration: 01/2018, fuel type: diesel, tire size: 285/70R19,5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, number of seats: 3, total length: 10,000 mm, total width: 2,550 mm, total height: 3,750 mm, loading space length: 7,800 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, Year of construction: 2018, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, = Additional options and accessories = - Digital tachograph - Tachograph (control device) - Fixed - Short cab - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 6,680 kg, Curb weight: 7,620 kg, Gross weight: 14,300 kg, Total tank capacity: 200 liters, Fifth wheel: fixed, Suspension type: air suspension, Cab type: short cab, Cruise control, Tachograph (control device), Digital tachograph, Electric windows, Electric mirrors, Radio/cassette, Color: blue, Heated mirrors, Rear view camera, Lighting type: halogen lamp, Lane assist, Seat heating, Bluetooth, Engine power: 188 kW (252 hp), Fuel: diesel, Euro: 6, Transmission type: Optidriver, Transmission brand: Volvo, Gears: 6, Power steering, ABS, ASR, Starter battery, Central locking, Seats: 3, Seating configuration: 1+2, Seat upholstery: fabric, Seat adjustment: manual, Tail lift, Tail lift type: rear flap, Tail lift capacity: 1,500 kg, Tail lift manufacturer: DHOLLANDIA DHLM.30, Tail lift material: aluminum, Tail lift size: 200 x 252, NL MOT TAILLIFT / SIDE DOOR / CARGO LOCK = Further information = Nkjdpfx Aaoyfmfijcsu Transmission Transmission: VOL, 6 gears, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; Tire tread left: 5 mm; Tire tread right: 6 mm; Suspension: leaf spring Axle 2: twin tires; Inner left tire tread: 4 mm; Outer left tire tread: 4 mm; Inner right tire tread: 5 mm; Outer right tire tread: 4 mm; Suspension: air suspension Weights Curb weight: 7,620 kg Payload: 6,680 kg Gross vehicle weight: 14,300 kg Functional Tail lift: DHOLLANDIA DHLM.30, rear flap, 1,500 kg Load platform height: 101 cm Maintenance MOT (general inspection): valid until 01.2027 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Identification Registration number: 30-BKJ-4 = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offering includes all European brands, years of manufacture, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Professional business conduct • Multilingual sales team • We understand our customers • Assistance with import and transport • (Export) registration swiftly arranged • Expert technical services • The security of “recognizable quality” • And more… Visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty packages.

Condition: used, mileage: 317,351 km, power: 184 kW (250.17 HP), first registration: 05/2015, fuel type: diesel, tire size: 315/80r22.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: red, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel-air, loading space length: 5,100 mm, loading space width: 2,440 mm, loading space height: 800 mm, Year of construction: 2015, Equipment: crane, electric window regulation, Technical information Number of cylinders: 6 Engine capacity: 6.700 cc GVW: 19.000 kg Drivetrain Drive: Wheel Make of engine: DAF Axle configuration Tyre size: 315/80r22.5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Functional Mast: telescopic (2 parts) Make of bodywork: EFFER 145/2S Njdpfxsu N H Aio Aacoku Tipper: Back

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Nkjdpfx Aajvvn Icoceu

Condition: used, mileage: 266,000 km, power: 184 kW (250.17 HP), first registration: 02/2016, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, total length: 9,970 mm, total width: 2,550 mm, loading space length: 8,050 mm, loading space width: 2,500 mm, loading space height: 2,580 mm, Year of construction: 2016, Equipment: electric window regulation, power mirror, tail-lift, traction control, Max. front axle load: 4480 kg Max. rear axle load: 8480 kg Number of cylinders: 6 Engine capacity: 6.700 cc Empty weight: 6.702 kg Carrying capacity: 5.288 kg GVW: 11.990 kg Tail lift: DHollandia, tail lift, 1500 kg Registration number: 75-BSL-5 Nksdpfxsykanus Aacou = Specifics = Clearance height 250 cm Left fixed wall Right sliding tarpaulin

Condition: excellent (used), Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, load switch, power switch, power disconnector, auxiliary switch, main switch, disconnector -Manufacturer: VEB, Fuse-switch disconnector, load break switch 250 A, unused, original packaging -Type: FLTA 250 Nkjdpfxjygt Dus Aaceu -Quantity: 1x load break switch available -Cardboard dimensions: 180/180/H70 mm -Weight: 1.8 kg

Condition: good (used), Year of construction: 1992, Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Njdped Srlrofx Aacsku Glasbeek finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate inside dimensions (B1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) Year 1992 3 x 380 volts 41 kW Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), NH fuse-switch disconnectors, auxiliary circuit breakers, line switches, miniature circuit breakers, load break switches, load disconnectors, circuit breakers, power disconnectors, auxiliary switches, main switches, disconnectors, fuse-switch disconnectors, fuse-switch disconnectors -Manufacturer: Klöckner Moeller, NH fuse switch disconnector 250 A, unused, original packaging -Type: GSTA1 -Technical data: 250 A 660 V 3-pole IP 00 -Number: 15x NH fuse-switch disconnectors available -Price: per piece Nkedpfx Asb A N Tksacsu -Cardboard dimensions: 180/260/H115 mm / 250/190/H125 mm -Weight: 3.5 kg / 2.7 kg

Condition: used, Year of construction: 2014, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Current frequency: 50 Hz Nksdpjyiltdefx Aacju

Condition: ready for operation (used), turning diameter over bed 500 mm Nodpfx Aaexl E Saocsku turning diameter over slide rest 310 mm turning length 3000 mm turning diameter in the gap 750 mm centre height 250 mm turning speeds 20-1000 U/min no. of turning speeds 18 spindle bore 56 mm longitudinal feed 0,045-1,09 mm/U face feed 0,025-0,625 mm/U number of feeds 55 total power requirement 4 kW weight of the machine ca. 2,37 t dimensions of the machine ca. 4,9 x 1,1 x 1,3 m