4 roll bending machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
sheet width 3040 mm plate thickness 7 mm pre-bending ja roll diameter 225 mm main drive 11 kW back roll setting 4 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 4,4 x 1,15 x 1,47 m Condition: ready for operation Electric 380 Volt Foot pedal Light barrier control L3jmb with asymmetrical roller arrgement and pre-bending. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
4
Three rolls round, three roll - bending machine, bending machine, sheet metal bending machine, 3-roller bending machine Spare parts top roller Drawing images -maximum sheet width = 2060 mm Zaxdot3i3 -maximum sheet thickness roll diameter: mm = 141 mm Storage diameter 75 mm Transport dimensions of 2690/141/H141 mm Weight 290 kg more
2

Rolls Roll Bending Machine Roll Bending Machine

Birmingham , United KingdomUnited Kingdom dealership location
5784 km
ready for operation (used)
• Two rolls powered by a single gearbox and gear system for top and bottom rolls • SAE 1050 Quality certificated steel rolls with high tensile strength • Spheroid Cast Iron Main Frames • Mobile control panel by foot pedal Ss3cos • Conical Bending Device • Manual dropend • Top roll support system • Wire grooves at the end of the rolls • Precision Bending with Brake Motor • Built according to EC Safety Directives (CE) • Model IRM 2550×140 produced standard with motorised back roll • User’s Manual... more
2
1020 x 1, 0 mm, brand unknown, older version without nameplate with base, Countershaft gear without cover,. Machine has been repaired by a qualified technician, tested, cleaned and is functioning. Test run was carried out. Color: blue/grey Machine weight approx.: 205 kg Overall dimensions: 1300 x 600 x 1000 mm Wr0m3gtb Shaft diameter approx.: 60 mm more
6
Bending machine ZGR-2140/1.2 incl. rolling scissors and hand folding machine Warranty: 12 months. Certificate CE Eccentric pressure that moves on both sides of the machines Working length: 2140 mm sheet steel 1,2 mm Non-ferrous metals the thickness of 30% more Beam: 24 mm Bending angle: 145 degree cut on the entire length of the work, lifting the upper cheek in three layers, maximum clear distance between the cheeks 80 mm rear rack to hold sheet metal, cutting width front given before... more
4
sheet width 2500 mm plate thickness 10 mm pre-bending 8 mm upper roll diameter ca. 240 mm lower roll diameter ca. 240 mm total power requirement kW weight of the machine ca. 7 t dimensions 4,85 x 1,4 x 1,7 m L23dv - with conical bending device - with extensions of bending rolls for fixing profile bending rolls - with DRO for adjustment of lower rolls more
5
sheet width 1010 mm F08bggiom plate thickness 1 mm pre-bending ja diameter of upper rolls 50 mm diameter of lower rolls 55 mm weight of the machine ca. 155 kg dimensions of the machine ca. 1,6 x 0,4 x 0,4 m Manual bending machine with asymmetric roller arrangement, swing-out Top roller, conical bending by tilting the back roller and Longitudinal grooves. The sheet thickness refers to a strength of the Sheets of 380 N / mm². Machine dealer with own stock of 2500 m² and certification of the d... more
5
Three rolls round, three roll - bending machine, bending machine, sheet metal bending machine, 3-roller bending machine, profile bending machine -maximum sheet width = 1020 mm 3dxxaozm9 -maximum sheet thickness 1.25 mm roll diameter = below 55 mm Roll diameter above 55 mm Delivery via hand wheel Dimensions 1380/500/H1160 mm Weight 208 kg more
1
Shaft diameter 30 mm Roll diameter mm Delivery promptly, subject to prior sale Shaft diameter: 30 mm Driven rollers: 2 Motor power: 0,75 kW Speed: 9 U/min Bending capacity (section / min. diameter): flat iron upright: 50 x 10 mm / 500 mm – 20 x 5 mm / 350 mm Lying flat iron: 50 x 15 mm / 350 mm Quadradstahl: 28 x 28 mm / 500 mm Round steel: Dm. 30 mm / 600 mm T steel: 50 x 5 mm / 400 mm U-steel on the outside: 50 x 25 x 5 mm / 400 mm U-steel inside: 50 x 25 x 5 mm / 300 mm Tube: Dm... more
4
sheet width 2050 mm plate thickness 3,0 mm pre-bending 2,0 mm roll diameter 130,0 mm work height max. 800 mm bending speed 4,0 m/min total power requirement 5,0 PS 9vmiyalxh weight of the machine ca. 2.500 kg. ca. range L-W-H 2.800 x 725 x 1.150 mm more


4 roll ben...
daily

New machines via email!

Stay updated!
2
1020 x 1.25 mm, base, with transmission, built in older, but functional,. Machine will be repaired by a qualified technician, tested, cleaned and is fully functional. Test run is performed. Bccuddisfj Color: grey Machine weight approx.: 220 kg Dimensions: 1290 x 600 x 1050 mm Shaft diameter approx: 55 mm more
6
sheet width: 1500 mm plate thickness: 12 mm 7nkp2lw0k pre-bending: - distance between columns: 1650 mm daylight opening: 50 mm roll dia. top roll: Ø 240 x 1560 mm roll dia. bottom roll: Ø 190 x 1560 mm height over floor: 850 mm voltage: 380/50 V total power requirement: 5,5 kW weight of the machine ca.: 6,0 t transport measurements machine: 4,0x0,8x1,2 m dimensions electric cabinet: 1,0x0,65x1,5 m 3 Rolls Plate Bending Machine Operation via lever on machine Equipment: - various radius template... more
1
sheet width 1020 mm plate thickness 3,5 mm roll diameter 90 mm total power requirement 0,75 kW weight of the machine ca. 310 kg Electric 400 Volt Foot switch Symmetry roll arrangement. This machine is in the following sizes obtainable: worhing length from 1020 until 2520 mm, max. plate thickness ( 400 N/mm² ) from 1 until 8 mm. Wuwzfu9x Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
3
Ring bending machines, profile bending machine -Außen replacement wheels ø 200 mm -for 35 mm tube hole 49 mm -4 piece rolls available Cjuyvfy0a Price complete Weight 44 kg more
5

Rolls bending machine - 3 Rolls MG AK 2006 P

Niederlangen, GermanyGermany dealership location
6346 km
2010
used
sheet width:2050 mm plate thickness:6 mm pre-bending:4 Badail tube diameter:480 mm upper roll diameter:160 mm side roll diameter:140 mm work height max.:705 mm total power requirement:3,0 kW weight of the machine ca.:2,1 t dimensions of the machine ca.:3,2 x 0,8 x 1,0 m more
6
ZGR-2640/0.8 for sheet steel 0.8 mm 30% more for non-ferrous metals including rolling scissors and smooth rolling machine the maximum thickness of the steel plate for 0.8 mm, of the aluminium sheet 1,2 mm the maximum working length: 2640 mm the rolling scissors along the entire working length bending angle 145 degrees pick en of the upper bar in three layers that maximum clear distance between the bars 80 mm delivery to Germany: 100,00 EUR the machine complies with the CE directives and has 12 ... more
6
Technical data: -Manufacturer: Akyapak -Country of origin: Turkey -BJ. 2016 Work range approx. 1050 x 3, 0 mm -to the conical rollers -with foot pedal -Electric 1.1 kw Weight approx. 570 kg -Roll diameter: approx. 90 mm -Engine with cast iron housing -Central rollers driven through a system of electric motor, circulation reduction gear and gear drive -Side swing-out top roller Mqau9 Main motor with brake -With wheel up and down moving behind and front roll, -Separate from the mac... more
5
sheet width 2030 mm plate thickness 2,0 mm ST roll diam. toproll 100 mm weight 745 kg Bbdkucdfu7 engine output 1,1 kW range L-W-H 2.500x520 xx 1.135 mm more
6
sheet width 1860 mm Qwivguwg3 plate thickness 0,75 mm pre-bending ja upper roll diameter 68 mm work speed 2 m/min length of draw-in 500 mm diameter of lower rolls ca. 90 mm weight of the machine ca. 700 kg dimensions of the machine ca. 2,45 x 0,7 x 1,1 m Electric 380 Volt Reflector plate bending machine with automatic curve control (templates) with asymetric roller arrangement, hydraulic rear roll adjustment and three roll drive. During automatic operation sequence a sensor valve on temp... more
5
Three rolls round, three roll - bending machine, bending machine, four rolls round, four roll - BlechbiegemaschineBlechrundbiegemaschine, 3-roller bending machine, 4-roller bending machine Machine is sold as spare parts carrier -no control -without Hydraulikaggreagt -beidseitige Prebending Diameter of the roller below 160 mm Roll diameter above 235 mm -einseitige hydraulic sheet metal retaining -maximum sheet width 2050 mm -maximum sheet thickness: 4 mm drive roller kW 2utcpl30z Spe... more
4
sheet width:2500 mm plate thickness:20 mm pre-bending:14 mm diameter of upper rolls:ca. 425 mm diameter of lower rolls:ca. 425 mm total power requirement:ca. 30,0 kW Bamvb89gwk weight of the machine ca.:18,5 t dimensions of the machine ca.:5,8 x 2,1 x 2,0 m more
6
Model: ZGR-4140/0, 7mm with rolling scissors, hand folding machine specifications:-maximum working width: 4140 mm - bending performance: up to 0.7 mm (steel) - bending angle: Max 145 degree - thickness of bending cheek: d 20 mm - the section with the Rollenchere over the whole working width - as lifting the upper bar in three positions - throat opening: 80 mm - degree Scala - angle stop - depth stops - weight: ca. 700 kg - the rolling scissors (maximum cutting performance up to 0.8 mm / steel) -... more
6
Technical data: -Manufacturer: Akyapak -Country of origin: Turkey -BJ. 2016 Work range approx. 1250 x 1, 5 mm -to the conical rollers -with foot pedal -Electric 1.1 kw Weight approx. 460 kg -Roll diameter: 75 mm -Engine with cast iron housing -Central rollers driven through a system of electric motor, circulation reduction gear and gear drive -Side swing-out top roller Main motor with brake -With wheel up and down moving behind and front roll, -Separate from the machine, mobile co... more
5
Technical data: -Max working width 2040 mm -Max material thickness at 40 kg / mm² strength 2 mm Bclqne9x9j -Upper rollers diameter 100 mm -Lower + rear roller diameter 90 mm -Work speed 4 / 8 m / min -Drive: 400 V / 0.7 / 1.0 kW -with: - mot. Rear rollers to bend -Conical bending device -3 reel, Drahteinlegerille -E. foot switch -Space requirement approx. B H 2700 x 1250 X 800 mm -Weight approx. 950 kg more
4
sheet width 2000 mm plate thickness 2 mm pre-bending 4 mm roll diameter 80 mm Drive 1,5 kW weight of the machine ca. 670 kg dimensions of the machine ca. 3 x 0,9 x 1,2 m Onttjqh7 Condition: ready for operation Electric 380 Volt Foot switch Asymetric roller arrangement, rear roll adjustment and lower roll adjustment over handwheel, elektr. safety control, upper roller forward swing-out. The sheet thickness refers to a strength of 400 N. Machine dealer with own stock of 2500 m² and cert... more
3
Three rolls round, three roll - bending machine, bending machine, sheet metal bending machine, 3-roller bending machine, profile bending machine Beading machine for gutters, roof gutters, bead machine, bead machine Sheet metal bending machine round bead machine for roof gutter -maximum sheet width = 1020 mm -maximum sheet thickness 1.25 mm roll diameter below = 51 mm Rollers diameter top 51 mm Cwaby0xc Delivery via hand wheel Dimensions 1600/700/H1310 mm Weight 177 kg more
3
sheet width 2000 mm plate thickness 8 mm pre-bending 6 roll diam. toproll 300 mm roll diam. bottom roll 280 mm total power requirement 6 kW weight of the machine ca. 8 t dimensions of the machine ca. 4 x 2 x 2 m Rfgbjcoqw mechanic machine. more
6
Folding bench for sheet metal up to 0.8 mm without rolling scissors Delivery 100 euro Company: PROD-MASZ (high-quality brand in the roofing trade) Capacity: 2.14 M Qxzuz7o2i Accessories: gas springs, rear rack to hold the sheet metal, the "Roman" screws (screws) allow the setting of cheek pressure force according to the thickness of the sheet to be processed, eccentric pressure, which shifts on both sides of the machines is bending angle, cutting width front to ensure given before c... more
6
Technical data: -Manufacturer: Say-MAK -Country of origin: Turkey -BJ. approximately 2014 Work range approx. 1050 x 2, 0 mm Ps0xcu -to the conical rollers -with foot pedal -Electric Weight approx. 400 kg -Roll diameter: approx. 71 mm more
2

Rolls bending machine - 3 Rolls SCHAEFER SRMVS

Metzingen, GermanyGermany dealership location
6677 km
1970
used
sheet width 2000 mm Rcm00eq7m plate thickness 22 mm pre-bending 18 total power requirement 47 kW weight of the machine ca. 18 t Bending length2,000mm Bending thickness22mm Bending thickness when bending ends of sheet18 mm Roll Ø of upper roll330mm Roll Ø of lower roll310kg Total electrical load, approx.47 kW - 380 V - 50Hz Weight, approx.18,000kg Accessories / Special Features "2 pieces motor-driven lower rolls, which can be tilted for bending the ends of metal sheet. "Display for rollin... more
2
sheet width: 1500 mm plate thickness: - mm pre-bending: - plate thickness: ca. 3,0 mm distance between columns: 1645 mm roll dia. top roll: Ø 110 mm roll dia. bottom roll: Ø 110 mm weight of the machine ca.: auf Anfrage t Bht3mpgo dimension machine [...]: 2,5 x 0,6 x 1,0 m further technical features: - bending roll adjustment course 100 mm Operation takes place via control panel. more
4
Three rolls round, three roll - bending machine, bending machine, sheet metal bending machine, 3-roller bending machine Qkvza3k8n -maximum sheet width 1520 mm = -maximum sheet thickness roll diameter: 2.5 mm = below 88 mm Roll diameter above 88 mm more
3

Plate Bending Machine - 3 Rolls BRONX

Willich, GermanyGermany dealership location
6368 km
used
sheet width 3355 mm plate thickness 63,5 mm roll diameter 686 mm voltage 400 V Gcwmlvv total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
ZGR 2140/1.2 incl. rolling scissors and hand folding machine the maximum thickness of the steel plate for 1.2 mm the maximum working length 2140 mm beam 24 mm weight approximately 290 kilograms of hand machine of cutting with the scissors on the entire length of work lifting the upper bar in three layers the maximum clearance between Chen the bar 80 mm bending angles 145 degrees rolling scissors NK 0, 8 mm Hand folding machine incl. Ltj0z Gas spring delivery Germany 100 euro We are ... more
6
Technical data: -Manufacturer: Say-MAK -Country of origin: Turkey -BJ. approximately 2014 Work range approx. 1000 x 0, 8 mm -with foot pedal -Electric Weight approx. 300 kg -Roll diameter: 46 mm Mvryf more
3

Plate Bending Machine - 3 Rolls DURMA 102/15

Barsbüttel/Hamburg, GermanyGermany dealership location
6495 km
1996
used
sheet width:1050 mm plate thickness:1,5 mm diameter of upper and back rolls:57 mm Ucz7woyjh lower roll diameter:60 mm weight of the machine ca.:120 kg dimensions of the machine ca.:1600 x 600 x 1100 mm 1 used DURMA 102/15 3-rolls bending machine with following equipment: - asymetric roller arrangement - upper roll with fold notch - wire core grooves - upper roll swing-out more
6

Rolls bending machine - 3 Rolls DUCCI F2 620 F

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
1980
used
sheet width mm plate thickness 9 mm pre bending ----- WORKING RANGE (BENDING) - working width max. 2050 mm - plate thickness rolling (max.) 9 mm ROLLS - upper roll diameter 210 mm - front roll diameter 210 mm - rear roll diameter 210 mm ELECTRICAL SPECIFICATIONS - total power consumption 8 kW Bbioo3qb0v - mains frequency 50 Hz DIMENSIONS / WEIGHTS - space requirements -left/right- 4000 mm - space requireme... more
5
4 rolls bending machine 3-roller bending machine, three roll - bending machine, four roll - bending machine, three-roll plate bending machine, bending machine, sheet metal bending machine, 3-roller bending sheet width 1520 mm = -maximum sheet thickness roll diameter: 3.0 mm = below 100 mm Roll diameter above 100 mm 2100/860/H1120 dimensions mm Weight 780 kg more
2
sheet width:1000 mm plate thickness:1,0 mm pre-bending:von Hand distance between columns:1050 mm upper roll diameter:50 mm lower roll diameter:50 mm dimensions of the machine ca.:1,5 x 0,5 x 1,2 m Nborz weight of the machine ca.:155 t more
9
Press RED 2200/0.8 + rolling scissors Ideal in the workshop as well as at the construction site of highest functionality! Mobile can be used! Technical data: the maximum working length: 2200 mm Qmjjaneh Bending capacity: 0.8 mm (steel) 1,2 mm (aluminium, copper, zinc) bending beam thickness: 15 mm Bending angle: Max 140 degree Oberwangen opening: 80 mm front attacks angle stop for consistent bending angle a tool box attached behind the machine is standard equipped with outer dimensions... more
3

   Four-roller round bending machine    DAVI   MCB-2020

Eilenburg, GermanyGermany dealership location
6747 km
2007
ready for operation (used)
 Offer details   Control type  PP35 storage location  from stock country of origin  Germany delivery time  upon request of freight base  EXW - ex-works price (free loaded)  on request technical details control / control: PP 35  Sheet thickness / sheet thickness: 10 mm  On bending / prebending: 8 mm  Width of sheet metal / plate width: 2000 mm Tglg2k0n  Diameter of top roller / diam. top roller: 205 mm   Diam. lower / lateral roller: 160 mm  Power consumption / connected load: 7... more
4

3-rolls hydr. profile bending machine Akyapak APK 101

Schlinckstrasse 1, 21107 Hamburg, DEGermany
6487 km
2017
as good as new (ex-display)
Diese Maschine ist sofort am Lager Hamburg Listenpreis ab Werk € 27.200.- Diese Maschine hat 10 Betriebsstunden, Leasingrückläufer! Technische Daten: Ggqoycwd I - Stahl - flach 120 x 30 (d 600) mm I-Stahl - hochkant 100 x 20 (d 2100) mm Winkelstahl 80x80x8 (d 2000) mm Rohdurchmesser max. 100 x 3 (d 3000) mm Vierkantmaterial 50 x 25 x 2 (d 600) mm Vollmaterial - Dia. 60,0 (d 1000) mm Werkzeugaufnahme 80,0 mm Drehzahl 4,2 m/min. Gewicht 1.600 kg Vcequ98b Abmessung L-B-H 1040 x 1... more
6

Plate Bending Machine - 4 Rolls DAVI MCB3034

Niederhelfenschwil, SwitzerlandSwitzerland dealership location
6726 km
1990
used
sheet width mm plate thickness mm pre bending ----- Nazkx WORKING RANGE (BENDING) - working width max. 3000 mm - plate thickness rolling (max.) 20 mm more
5
Three rolls round, three roll - bending machine, bending machine, sheet metal bending machine, 3-roller bending machine, profile bending machine -maximum sheet width = 1030 mm -maximum sheet thickness 1.25 mm roll diameter = below 50 mm Roll diameters above 50 mm T077pwo9u Delivery via handwheels Dimensions 1600/550/H480 mm Weight 150 kg more
4
sheet width 2040 mm plate thickness 2 mm pre-bending ja roll diameter 110 mm Drive 1,5 kW weight of the machine ca. 980 kg dimensions of the machine ca. 3,1 x 0,9 x 1,05 m 2897rchtu Condition: ready for operation electric for three-phase 380 Volt Foot pedal Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
6
ZGR-2140/1,2 with additional equipment (Rotary shears and Burnisher included !) Our products are best quality and have certificate CE. You are buying directly from manufacturer ! Plate Bending Machine ZGR-2140\1,2 + additional equipment Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 1,7 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length Uvcbxbvrh -... more
4
sheet width 2050 mm plate thickness 1,5 mm roll diam. toproll 75,0 mm side roll diameter 75,0 mm Ckfsepa3 weight of the machine ca. 842 kg. range L-W-H 2.400 x 900 x 1.140 mm more
1
sheet width: 1080 mm plate thickness: 1,25 mm pre-bending: - Fb7ssa9 distance between columns: 1200 mm roll dia. top roll: Ø 63 mm roll dia. bottom roll: Ø 63 mm weight of the machine ca.: auf Anfrage t dimensions LxWxH: 1,9 x 0,6 x 0,9 m further details: - upper roll can be swing out - operation via hand wheel more
3

Rolls bending machine - 3 Rolls PRINZING RME70/103

Göppingen, GermanyGermany dealership location
6699 km
2015
used
sheet width unbkt. mm Nc9nr plate thickness 1,8 mm pre-bending unbkt. total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
4
Technical data: maximum working width: 3050 mm diameter upper roll: bottom rollers 500 mm diameter: 400 mm rollers hardened Max sheet thickness: 50.0 mm Prebending: 32.0 mm conical bending through hydraulic tilting of the bottom rollers possible hydraulic KL applager hydraulic bending help top hydraulic two-way bending AIDS motor power: 37 kW mobile control panel with digital display dimensions (length x width x height): 4600 x 2100 x 1800 mm Weight: 52 tons Yrsxk0 more


4 roll ben...
daily

New machines via email!

Stay updated!

to

to

Edit search
4 ROLL BENDING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close