Used Alldos Primus Serie for sale (3,225)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We are selling an Instron tensile and compression testing machine in excellent condition. Instron 34TM-50 benchtop model Config: E1-F1-G1 50KN Year of manufacture: 2022 Weight: 151Kg Load transducer: 50KN 2530-50kN/165541 Load transducer: 5kN 2530-5kN/166885 Last service and calibration August 2024 Next service and calibration August 2026 The 3400 Series universal testing machines cover a test force range from 500 N to 300 kN. Featuring the patent-pending Instron operator protection architecture, the 3400 Series testing machines are easier to use, smarter, and safer than ever before. The testing systems are suitable for performing tensile, compression, bending, peeling, puncture, friction, shear, and numerous other tests and can be used with a wide range of clamping devices and testing fixtures from our extensive accessories catalog. Total height: 1604mm Hfodpfx Ajwz Ikteg Njn Maximum vertical test space (daylight test - from base to bottom of crosshead): 1198mm Test type: Tension, compression, and zero-crossover operation Basic control mode: Displacement control Load capacity - kN (lbf): 50 (11240) Maximum speed - mm/min (in/min): 508 (20) Minimum speed - mm/min (in/min): 0.05 (0.002) Maximum force at maximum speed - kN (lbf): 25 (5620) Maximum speed at maximum force - mm/min (in/min): 254 (10) Return speed - mm/min (in/min): 508 (20) Crosshead speed accuracy: ± 0.2% of the set speed at a steady rate and without Load Travel (Crosshead Position) Display Accuracy: In no-load condition, ±0.02 mm (0.0008 in) or ±0.10% of the displayed reading, whichever is greater. Travel (Crosshead Position) Repeatability - mm (in): ±0.015 (0.0006) Load measurement accuracy: ±0.5% of the reading up to 1/200 of the force transducer's rated force. Strain measurement accuracy: ±0.5% of the displayed reading up to 2% of the full scale value, with an ASTM E83 Class B or ISO 9513 Class 0.5 strain transducer.

Condition: used, functionality: unexamined, Year of construction: 2010, operating hours: 8,000 h, Parts package for LINDE series 394: hydrostat, viscous fan, radiator, silencer can, end muffler, 2 tilt cylinders, side cover, air filter, mudguard + various other parts in mesh box Hfsdpfjvvny Sox Ag Nsn

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) Hfodpfert U Nusx Ag Nen We are happy to answer any further questions you may have over the phone.

Condition: new, Discover our selection of robust and precise conventional lathes! Are you in search of a reliable lathe that boosts your productivity? Experience precision and performance with our new conventional lathes equipped with a wide range of accessories. Our machines offer turning diameters from 400-1000mm and turning lengths up to 10m, also available as a cycle variant. With various models, you have limitless possibilities. Some machines are quickly available from stock! Hfjdpod Afn Isfx Ag Njn Explore our extensive special accessories, such as hollow spindle, infinitely variable speeds, Siemens controls, and more, to make your lathe even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver the best results. Trust in our long-standing experience and let us optimize your machining processes together. Invest in quality and precision - contact us today! Here's a selection of STOCK MACHINES (see images), and we are happy to offer additional models or special machines upon request: Technical Main Data: DLZ Series including 15% or more BAFA subsidy! - Turning diameter over bed: 400-1000 mm - Turning length: 1000/1500/2000/3000 mm - Spindle bore: 80 (opt. 105) mm - Workpiece weight up to 2t - Spindle speed up to 2800 rpm Accessories: Digital display, 3-jaw chuck, faceplate, Multifix tool holder, and more. Extensive SPECIAL ACCESSORIES such as infinitely variable speed, steady rests, larger spindle bore, and more to make the machine even more productive. Currently available new machines with warranty and BAFA subsidy, for example: - SDM 850: Turning diameter over bed 850mm, turning length 3m - DLZ 325: Turning diameter over bed 650mm, turning length 2m and 3m - DLZ 250: Turning diameter over bed 500mm, turning length 1m and 1.5m - DLZ 200: Turning diameter over bed 400mm, turning length (missing information) More models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our service for you: - Consultation and solution finding at your location - Organization of machine transport to your facility - Installation, assembly, commissioning, and ready-to-use handover - Financing and exploration of funding opportunities through KFW and BAFA, and more.

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum Hfsdpfx Agsr Iyvms Non inverter on all belt groups inverter on belt outfeed brush group blower group on outlet

Condition: excellent (used), Parallel Lathe WEILER type PRIMUS Between points: 400 mm Maxi Ø on bench: 250 mm Maxi Ø over saddle: 130 mm Spindle Ø 24 mm Turret Multifix type A 3-jaws chuck Ø 155 mm Threadings Metric + Whitworth Tailstock CM2 Hodpoxnp I Dsfx Ag Nefn Scale HEIDENHAIN ND522 Feeds: auto 2 axes New electrical panel Delivered with: 1 4-jaws chuck Ø 155 mm, 4 tool holders, 1 drill chuck Voltage: 380 V Dimensions (L x W x H): 1300 x 900 x 1900 mm Weight: approx 500 kg Machine in VERY GOOD CONDITION

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Hodpfx Agjn Ard Ds Nofn

Condition: excellent (used), functionality: fully functional, Weiler Primus LZ/G lead and feed screw lathe in special paint finish light gray !!! Technical data: >> Year of construction ca.1990 Machine-No.3150 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> spindle passage 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake Hjdpovivmyofx Ag Njfn >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> collet chuck device new with collets from 3 to 26mm 1 mm increasing new >> To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run smoothly and evenly. The bed guides are in very good condition. The Primus was used in a training company. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Year of construction: 2012, condition: excellent (used), Variovac mod Primus y Year of production 2012 deep draw for hard subfilm. 3x punches, rollers for waste plastic, Gas mixer, Hedefgiunepfx Ag Nsfn 4-part tool 245 x 175 mm Perfect for meatballs, Vegobolls, bacon and more. Foil width 422 mm gas machine in very fine condition. Max depth 110 mm.

Year of construction: 1986, condition: used, Weiler Primus lathe built approx. 1986, three-jaw chuck, Multifix. Machine in good condition, ready for demonstration under power on request. Hfedpferhzcmex Ag Nen

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and feed screw lathe from training workshop !!! Hfodpfx Agju Aftgs Nen Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 piece three-jaw chuck 160mm with 1 set of jaws >> 1 new three-jaw chuck 125mm with 2 sets of jaws >> Collet chuck device with collets from 1 mm to 20 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Fence >> Change wheels To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Hfjdpfx Ajvtp Edjg Non >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: excellent (used), functionality: fully functional, Weiler Primus lead and pull spindle lathe with 2 axis digital readout Heidenhain from training workshop !!! Technical data: >> Year of construction approx. 1985 >> center height 120 mm >> center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear steps >> Spindle clearance 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 2-axis digital readout from Heidenhain >> 1 new three-jaw chuck 125 mm with 2 sets of jaws >> collet chuck device new with collets new from 3 mm to 25 mm 1 mm increasing >> Mulifix size A with 3 steel holders >> Back plate Hjdpeu Afqlefx Ag Nsfn To the machine : We are offering a Weiler Primus lathe in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs smoothly even at high speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and surfaces can be produced as if ground. Take the opportunity to inspect this machine on site under power and see for yourself its condition.

Condition: used, overall weight: 36,000 kg, maximum load weight: 28,100 kg, axle configuration: 3 axles, loading space length: 13,540 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, loading space volume: 95 m³, first registration: 06/2020, next inspection (TÜV): 08/2026, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schwarzmüller moving floor trailer +/- 95 cbm, "Cargo Floor" floor with 21 boards approx. 6 mm, complete discharge (moving front wall), infeed and outfeed function, double-wing rear door with rotary locking bar, front access steps and standing platform on body, sliding roof tarpaulin, service door at the front, loading pressure gauge, foldable rear light protection, storage boxes, ABS, EBS, SAF INTRA axle(s), ALCOA aluminum rims, disc brake system, air suspension with lifting/lowering mechanism, 1st lift axle, "Jost" landing gears. The vehicle may have advertising decals and/or lettering attached. Radio remote control included. Our offer is generally without a new technical inspection (TÜV). If a new technical inspection is required, we are happy to provide a quote from our partner workshops! The vehicle may have advertising decals and/or lettering attached. Our general delivery and payment terms apply. Hfodpfxov Uvako Ag Non We are happy to provide you with a financing or leasing offer for this unit. Please feel free to contact us!

Condition: good (used), mileage: 127,110 km, power: 210 kW (285.52 HP), first registration: 08/2022, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 5,000 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, cruise control, differential lock, spoiler, traction control, = Additional Options and Accessories = - Roof spoiler - Differential lock - Electric windows - Electrically adjustable exterior mirrors - Euro 6 - Remote central locking - Leather steering wheel - Air suspension - Fog lights - DAB MP3 Bluetooth 4.0 radio Hfsdpfsw N Rfzex Ag Non - Sun visor - Daytime running lights = Further Information = General Information Cab: GLOBAL 1 BED Registration number: 31-BTH-9 Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Transmission: OPTISHIFT 8AP, 8-speed automatic Fuel tank: 300 liters Front axle: Max. axle load: 5,800 kg; Steered Rear axle: Twin tyres; Differential lock; Max. axle load: 9,440 kg Dimensions Dimensions (L x W): 900 x 245 cm Weights Unladen weight: 5,847 kg Payload: 8,453 kg Gross vehicle weight: 14,300 kg Condition Technical condition: good Visual condition: good

Condition: ready for operation (used), Year of construction: 2010, This TIMESAVERS 42-serie-1350-RB was manufactured in 2010. It features a working width of 1350mm and is equipped with rotary brushes, a vacuum table, and a wet extraction unit. If you are looking to get high-quality deburring capabilities, consider the TIMESAVERS 42-serie-1350-RB machine we have for sale. Contact us for more information. Application Types Other Sheet Metal Machinery Hfjdpfxoxiriyj Ag Nen

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Hjdpfsw Tri Nex Ag Njfn Exact details can be found in the PDF.

Condition: excellent (used), Year of construction: 1999, Very neat and complete Gildemeister CTX 400 E Series 2 year of manufacture: 1999 control: Heidenhain CNC Pilot 3190 Hedpfx Agexltrbj Njfn max. turning diameter: 570 mm max. turning diameter over cross slide: 420 mm max. turning length: 635 mm C-axis 12-position turret, with a maximum of 6 driven tools max. driven tool speed: 4000 rpm main spindle: 21 kW speed range: 25-5000 rpm tailstock chip conveyor tool probe drawer cabinet with accessories workbench/drawer cabinet with accessories tool holders chuck and collet holder documentation machine is powered for inspection

Condition: used, This G+H precision surface and profile grinding machine, type: FS40 Primus SA 260485, is being auctioned online in our industrial auction / machinery auction due to the closure of Bellinger Feinmechanik & Werkzeugbau. Hsdpfx Agsxlg H Ee Nefn

Condition: new, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2025, emission class: euro6, color: white, number of seats: 3, Year of construction: 2025, General Information Number of doors: 5 Cabin: single Technical Information Number of cylinders: 4 Engine displacement: 2,000 cc Transmission: 6-speed manual Condition General condition: very good Technical condition: very good Hfjdpfexixt Ssx Ag Njn Optical condition: very good Damages: none Warranty Warranty: None

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 90mm Measurements depth 97mm Measurements height 180mm This TIMESAVERS 11-serie-225-W deburring machine was manufactured in 2005. It features a grinding belt and conveyor belt both sized at 230x1525mm, with a working width of 225mm and a distance between the rolls of 125mm. Ideal for precise deburring tasks, the TIMESAVERS 11-serie-225-W machine we have for sale is a robust addition to any workshop. Contact us for more information. Hfodoxirmxepfx Ag Nen Application Types Other Sheet Metal Machinery

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Hfjdpfx Agew Trkaj Nsn Exact details can be found in the PDF.

Condition: new, mileage: 1 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, emission class: euro6, color: white, number of seats: 3, Year of construction: 2024, General Information Number of doors: 5 Cab: single Technical Information Number of cylinders: 4 Engine displacement: 1,500 cc Transmission: 6-speed manual Condition Overall condition: very good Technical condition: very good Visual condition: very good Damage: none Hedpoxixdkjfx Ag Nsfn Warranty Warranty: None

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Hfjdpfx Agew Trkge Nen

Condition: new, mileage: 1 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/2025, emission class: euro6, color: white, number of seats: 3, Year of construction: 2025, General Information Number of doors: 5 Cab: single Technical Information Number of cylinders: 4 Hsdpfx Ajxhgy Dsg Nsfn Engine displacement: 1,500 cc Transmission: 6-speed manual Condition Overall condition: very good Technical condition: very good Visual condition: very good Damage: none Warranty Warranty: None