Automatic case maker buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 380/480 V, 50/60 Cy, 3 Ph. Bs3p3nwi LIGMATECH MPH 410/25/07 CASE CLAMP (SEMI-AUTOMATIC): -- (1) Horizontal & (1) vertical interlocked pressure beam, each with electric push button control; 8-beam surface area eliminates need for pressure pads. -- Working capacity:9.8"" - 98.4"" (250 - 2,500 mm) Length; 9.8"" - 27.5"" (250 - 700 mm) depth, 12"" - 55"" (305 - 1,400 mm) height. -- Motorized horizontal & vertical beams can position simultaneously or individually during setup,... more
Invertor speed control. Cutter for roll spine complete and in working condition Bbg8kdrdrd In stock Case maker/Case-Binding Book Hard cover, year 1972 Cover size min 110 õ 155 mm, Cover size max 400 õ 560 mm, compressor, Automatic, Glue Pot more
Emba 245 Quickset ,2001 Ref.Nr : 2432 Manufacturer Emba Model 245 Quickset Year built : 2001 Speed : 16800 sh/h Max. sheet size : 1050 x 2450 mm Condition : very good Bbhgztqizs Price : on request Technical spezification : • Quick set order design • Sun lead edge feeder • 4 top print flexo units with vacuum transport • Automatic slotter double shaft • Rotary die-cutter • Straightline folding rails with vacuum transport • VALCO Electronic Gluer • Counter/ejector from top • Computer... more
board prestacking conveyor, Board cutter, cloth feeder, inside lining, viscosity control, device for producing padded cases, auto case counter, counter stacker, board centre strip magazine, chopper for the centre strip wasteanuals and tools, Bbcjvlr9kk more
6
Corner cutter, Colour monitor, Board magazin for manual loading, Centre strip infeed, Glue unit, Viscosity control, Cloth feeder, Pressing station, Stacking delivery, Pump(s), Specifications are subject to manufacturers changes in similar models, Maximum open case size : 390 x 660 mm, Maximum open case size : 100 x 170 mm, Joint width: 6 - 90 mm, Width between boards: 16 - 120 mm., Centre strip roll thickness: 0.3 - 0.6 mm, Maximum mechanical speed: 45 cycles/minute, Full specifications on reque... more
6
year 2001 Sun Automation feeding unit N. 4 top printing flexo units vacuum transport Double shaft slotter RDC Valco electronic gluing system FFG vacuum transport Counter ejector Board size: min. 280 x 600 max. 1050 x 2450 skip. 1400 x 2450 max speed. 280 sh./min. 16 800 sh./h. Bbe0hr77uv Available August 2018. more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Uw99i2uva H. KALLESOE K 12 EL Case Clamp: -- Specifications:Working length 27.5"" - 88.5"" (700 - 2,250 mm); working height 11.8"" - 49.2"" (300 - 1,250 mm); working width 25.5"" (650 mm). -- Vertical & Horizontal Pressure Beams:Vertical & horizontal pressure beams are adjusted by means of (3) 220 v, 3 phase motors w/automatic locking; includes a total of (5) clamps with (2) pressure cylinders per clamp; each cylinder 4"" (100 mm) dia with a 3.5"" (90 mm... more
6
• Max 1290 x 2685mm – 1550 x 2685mm Skipfeed • Min 300 x 450 • Max. Rotary 1240 x 2600mm • Max. Print 1290 x 2400 mm • Slod 9mm • Max thickness 10mm • Max 6500 Bo/H. • Print Diameter 399mm • Rotari Diameter 362mm/with Kautschuk 407mm • Motor 15 KW • Feeder • 2x Print Union • 1x Rotary M99yt • Slotter • FolderGluer • Silencer more
Martin 924 ,1987 Ref.Nr : 2427 Manufacturer Martin Model 924 Year built : 1987 Speed : 18000 sh/h Max. sheet size : 240 cm Availability : immediately Condition : good Price : on request F3pyundfi Technical spezification : • Prefeeder SIMON • 2 colors • Rotary • Slotter • folding glue • soundproofing • bundling machine • Semiautomatic packing aid • The machine is sealed and packed and stored more
6
Schmedt Sumbel manual casemaker modified to big format 110x48 Gluer and positioning table Praekant integrated on frame, with side table. gluer for warm (animal)glue Light bar with mirrors for positioning of spine board in centre Wfw80p2n turning in machine Schmedt Praekant (format 60x40) with new turning in fabric. very good condition overall. more


automatic ...
every day

New machines via email!

Be informed!
6
Corner cutter, Copilot system with touch screen monitor, Motorized format adjustments, Board prestacking conveyor, Board cutter: PS, Centre strip infeed, Chopper for the centre strip waste, Glue unit, Viscosity control, Pressing station, Stacking delivery, Device for inside lining with hotmelt, Specifications are subject to manufacturers changes in similar models, Maximum open case size : 660 x 380 mm, Maximum open case size : 210 x 130 mm, Cloth width: 234 - 690 mm, Cloth height: 154 - 410 mm, ... more
6
CA professional packaging machine of a renowned manufacturer of tape width of 50 mm. maximum dimensions: width 650 mm x height 650 mm, length unlimited. CA minimum dimensions: width 130 mm x height 120 mm x length 160 mm. -No settings for different carton formats required. -Two-sided lock top and bottom. Transport drive side. Pressure for automatic width and height adjustment continuously adjustable. M8qc9 Working height of adjustable machine. Performance approx. 800 cartons p... more
5
Year 2011 – Complete of: Gviz88 Board prestacking conveyor – Board cutter – cloth feeder – Inside lining – Viscosity control – Device for producing padded cases – Auto case counter – Counter stacker – Board centre strip magazine – Chopper for the centre strip waste – Manuals and tools more
6
Hydraulic throughfeed press, case clamp manufactured by: LIGMATECH MSP 20/06 RE Year of manufacture: 1998 He has been operating for 2 years Description: in very good condition Workpiece width min-max mm: 255-800, Workpiece length min- max mm: 250-2500, Workpiece height min- max mm: 300-1300, 3va8ycdb Feed rate max m / min: 8m- max 37m 2 cycles/min. Clamp provided with 1 vertical and 2 lateral pressor, controlled by two indipendent hydraulic circuits. Hydraulic box is fixed at the machine.... more
6
Schmedt Sumbel manual casemaker modified to big format 110x48 Gluer and positioning table Praekant integrated on frame, with side table. gluer for warm (animal)glue Light bar with mirrors for positioning of spine board in centre turning in machine Schmedt Praekant (format 60x40) with new turning in fabric. Ektarufpo very good condition overall. more
6
Gandossi Baby Line 200 inliner-casemaker Ref.Nr : 2402 Manufacturer Gandossi Model Baby Line 200 Year built : 1997 Speed : 4800 sh/h Max. sheet size : 2135 x 830 mm Availability : immediately Condition : good Fktmedwuu Price : on request Technical spezification : • Gandossi Baby Line 200 inliner-casemaker • Year : 1997, installed 2010 • Speed: 4800 sh/h • Circumference : 840 mm • Maximum sheet Lenght : 860 mm • Minumum sheet Lenght : 300 mm • Maximum sheet widht : 2135 mm • Minumum ... more
6
Professional packaging machine of a renowned manufacturer of tape width up to 50 mm. maximum dimensions: width 600 mm x height 600 mm, length unlimited. -No settings for different carton formats required. -Two-sided lock top and bottom. Transport drive side; Tape speed approx. 20 m per minute. Nooqlce Adjustable contact pressure. -Power-saving function: the sensor at the exit of the package is not used longer, the conveyor belts will turn off automatically. -The working height... more
6
Case maker for the production of one or three piece cases with rigid or flexible spine Capacity: up to 60 cases/min Case size min. 105 x 170 mm max. 410 x 720 mm Counter stacker with return transport to the using person Pre-pile conveyor M8vij Flexible Spine attachment Double press rollers 3 piece case with rigid spine (from magazine) Equipment for single-piece board Inside Lining in a second run Support tails for the processing of one-piece cover more
6
• 2 Colors • Aut. Slotter • Folder Gluer • Vakuum in Produktion • Immediately available. more
6
Pre-feeder Favalessa Vacuum feeder Rotary die cutter Automatic slotter with pre-feeder Ft0axxl Folder Unit Counter ejector Boundle strapper Mosca Palletzier Boltri Totally refurbished year 2003 more
3
manual Casemaker for books (3 pieces) or ringbinders max. format 50x70 Nogeqqjpq production speed 75-150 pcs/hr machine is in good condition. reconditioned in 2016 MHGraphics is CMC dealer more
6
Manufacturer: Stahl VBF Model: DM 300/1 Year of Manufacture: 1987 2s92li787 1987 Stahl-VBF DM300/1 Casemaker. For the production of hard book covers, Lever Arch files etc. in a rotary machine principle. Magazine feed of pre-cut boards Reel feeder for soft, and hard spines with auto-splice Magazine feeder for stiff or hollow spines Vertical stack feed of pre-cut cloth Hot-melt gluing unit Top and bottom turning-in station 2nd turning-in station with pressing roller Upright counter-stackin... more
6
Professional packaging machine of a renowned manufacturer of tape width of 50 mm. maximum dimensions: width 550 mm x height 625 mm; length unlimited. By changing the default setting, cardboard can be processed up to 725 mm height. Description: -No settings for different carton formats required. -Double-sided cap on top and bottom, as well as transport drive up and down. Ba0wv77bta -Different leg lengths of tape on the side of the package can be adjusted. Pressure can be adjusted ... more
3
Kolbus DA 270 casemaker year 2007 Copilot System with touchscreen Board prestacking conveyor Cloth feeder for non-stop operation with pile magazine Counter stacker delivery with following roller conveyor Programmable automatic setting, motorized adjustment, fault indication Device for processing centre strip rolls Technical details Case size min (width x height) (mm): 205 x 140 mm Case size max (width x height) (mm): 670 x 390 mm 9tkkokof8 Cloth width: 223 - 708 mm Cloth height: 130 -... more
6
• max size 3030 x 1200 mm. • with skip-feed 3030 x 1600 mm. abt. • automatic feeder with SUN feeder Gvgmt8 • 2 bottom flexo printing units • on request available other flexo printing same model • motorizes slotter (Automatic) • rotary die-cutter unit • folder gluer section • counter stacker ejector • machine in operation • good conditions more
Beech in hanging machine with press and all accessories (Hardcover) for the creation of personalized Hardcovern to binding maximum page size: 30 x 30 cm inkl.verschiedener book cover Yzz7m8lkw It's a showroom machine which the State is as good as new! more
6
Cases and Cover Production. Enables you to produce medium and small runs. - Computer controlled sheet cutting 3yyes7sr - Hand feeding station for paperboard and back pads - Automatic glueing with cold glue - Corners hammering with position control - Edges hammering with position control - Transport carriage with automatic centering - Cover of Din A6 to Din A3 - Cycle time 15 seconds per copy more
6
Manufacturer: Stahl VBF Model: DM 300/1 Year of Manufacture: 1987 1987 Stahl-VBF DM300/1 Casemaker. For the production of hard book covers, Lever Arch files etc. in a rotary machine principle. Magazine feed of pre-cut boards Reel feeder for soft, and hard spines with auto-splice Magazine feeder for stiff or hollow spines Vertical stack feed of pre-cut cloth Hot-melt gluing unit Top and bottom turning-in station 2nd turning-in station with pressing roller Upright counter-stacking delivery un... more
6
Martin Transline 1228 inliner-casemaker Ref.Nr : 2311 Manufacturer Martin Model Transline 1228 Year built : 1988 Max. sheet size : 280 cm Availability : immediately Condition : good Price : on request Technical spezification : • 4 colors flexo printing units (Rapidset) • Slotter • Rotary • Folder glue and counter (Folder gluer and counter ejector are disassembled) 79ra7fsa9 • The machine was completely overhauled in Spain in 2011 more
6
Case Maker Wegra BD14 Yw8i2mlxg more
4
Casemaker M2aht Curioni 3100 NT Automatische Slotter with Giovanardi FolderGluer • Sun Feeder • 2x Flexo Printing Unit • Automac Slotter more
6
case maker KOLBUS DA 240 year of construction 1998 spine width 16-120mm board 1-4 mm 50 cases/min •basic machine 88e3hr3u0 •board pre-feeder •board magazine •board centre strip device (from roll) •magazine for lining material •Glue tank •viscosity control •pressing device •belt delivery •pump in cleaned and in working condition loadet from showroom more
2
Special design for the production of pocket Diaries Covers ONLY 6.100 Production hours Capacity: 50 up to cases/min Case size round corner: min. 105 mm x 140 mm max. 270 mm x 470 mm Cover thickness: min. 0,1 mm- max. 0,3 mm Cta8ltkt (depending on stiffness) Width of inside wrapping from 12 mm up to 17 mm Paper cover material. 80 g/sqm – 120 g/sqm more
6
Case maker Smyth Freccia CM Year ca. 1980 - Serial-No. 409 Sxdfs2s2z Size min. 110 x 155mm - max. 405x560mm Spine width min. 8mm - max. 95mm Automatic Case maker Automatic Turning-In -Available Immediately - -can be inspect- -on stock - more
3
Case maker Polygraph Wegra Rodas BD 15: Year: 1984 Max. size: 530x400 mm Min. size: 110x155 mm Y0ovwlhul Speed max.: 15 Cycles/min hand feeding covering material hand feeding hard spine insert automatic cardboard feeding automatinc soft spine insert feeding from roll hot glueing Condition: good condition Available immediately Location: Poland more
1
case maker for big size max. size: 1400 x 800mm B9o0qwb8 with automatic stacker more
6
Casemaker Bendazzoli and Astin Gluer 2700 x 1560 • Max 2700 x 1560 mm • Vakuum Feeder • 1x Flexo Top Printing • Automatic Slotter 8c8x7rzve • FolderGluer Astin 3200 Year 2006 • Machine visible in production. more
3
Fully automatic case sealer from Cyklop International Mpyzd Type Cyklop 50/50 STAH Box 110-500 in mm more
4
Board Size: min. 160 x 360 mm max. 360 x 675 mm Thickness: min. 1.5mm max. 3.0 mm Cover Material: min. 0,1 mm max:0.3 mm Compressed Air: max. 650 Nl/min. bei 6 bar Electrical power: max. 25 KW Weight: 5500 KG Guvxkk more
6
Hard cover maker Fastbind Casematic The device is in working condition ready for production. This is the whole station, which allows you to perform a cover of max. A4 +. The machine is equipped with a backlight of working table, guillotine for cutting corners, systems module to wrap cover ends electrically controlled. Operational by foot pedal. Description: Bg8rj7iew Max. area (W. x L.) 550 × 390 mm. Voltage 230 V Machine dimensions 770 x 540 x 320 mm Table 40 kg weight. Device is very effici... more
5
• Vacuum pump incl. Vacuum pump • 2x printing units => 1x Bj.1988 & x year 1997 • Clichés 6mm • Pressure from below • Speed: 10000 - 12000 Bo / h. • Working width Max. 900 x 2480 mm • Working width min. 280 x 640 mm • Slotted motor. Hwsiihcl • Folding unit motorized. Robatec glue aggregate. • Sodeme Stitching Head, Control General Overhaul. more
5
Machine for casemaking & inside lining. Consisting of: Gluing Station Type IA 900 SP Visco Control WK-02 3i9sjgomg Board feeder and spotter Type CA 900 Casemaking station Type R4L-900 SP Delivery Technical specifications Capacity: up to 45 cases/min Case size min. 100 x 250 mm, max. 600 x 1200 mm Mechanical speed: 45 cycles/min more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Mv0o7 UNIQUE 313 Automatic Shaper for Miter DoorsMiters the end of (2) cabinet door rails on each pass, automatic cycle controlled by maintenance-free PLC software for accurate & easy alignment of mitered corners; (2) 5 HP dual-motors for shaping w/1-1/4"" spindles. -- Features: (2) Pneumatic clamps hold workpiece on either side while parts are being shaped, unlimited part length. -- 1"" Max. part thickness, 4"" max. part width. - Staggered tables al... more
3
Bbhjhdb9rw2007 Case CX240B 700mm Pads, CV, QH, Piped c/w Reverse Camera, A/C - DCH240R5N7EAM1138 This machine will be sold by Euro Auctions at an unreserved auction in Dromore, Co Tyrone, Northern Ireland on 23rd & 24th February 2018. For more information contact Michael Conway or Cathal Doherty more
6
We are pleased to offer: Shengtian SGF 1050 A Automatic Thermal Film Laminator, with Water Based Glue, Year 2014. Serial Number: 1412028 Maximum sheet size 1050 x 1200 mm Minimum sheet 350 x 350 mm Sheet Weight 105-500 gsm Total Power 58 KW Total Weight 8000KG Dimension (L*W*H) 12500*2600*2800 mm Speed 80 M-Minute Circling water heating system Drying roller heat recycling system High quality steel roller with specially designed inner part for water heating and circulation heating r... more
15
Used skid steer loader CASE 1845 C, Year: 1998, 1868 working hours, full rubber wheels, 180 cm bucket, ROPS/FOPS open cab, 3rd. valve. All original Dutch loader, last inspection done with 1795 working hours, technical inspection until 9-2018 in the Netherlands. F9oauikbq Machine was in a well maintained Rental Fleet and mainly used for cleaning the corners in the loading comparments of ships. Good runner, no leaks, just a good 2800 kg Bobcat. more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 3tgflx0ec Automatic Cut-Off & Sorting Line ... Custom Designed for cutting pallet manufacturing lumber to size and sort to length in volume. -- Working Capacity:Cut length 12', cut width 6"", cut height 2"" (W/H cut capacity may be higher, to be verified based on application). -- Main Components:MAGGI Engineering, Automatic Lumber Feeder Magazine, ~ TIGERSTOP, Programmable Push Fence, ~ CTD, Automatic Cut-Off Saw, ~ STEFF-Maggi 2068 Feeder, ~ MAGGI Engine... more


automatic ...
every day

New machines via email!

Be informed!

to

to

Change search
AUTOMATIC CASE MAKER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close