Baler vertical buy used

Sort by
Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4

Vertical baler Bramidan X30 for cardboar Bramidan X300

4.900  €
Fixed price not including VAT
Submit request
Sośno, Polen, PolandPoland
6948 km
2014
excellent (used)
4.900  €
Fixed price not including VAT
Submit request
Call
Vertical baler Bramidan X30 for cardboard and PET Bczc3rfxbf Used machine, year of production: 2014 Price: 4900 euro’s (net price) The machine was produced specially for wastes like PET or cardboard. This model in many cases is better than bigger industrial presses with pressure of 50 tons. It has a strong metal construction that provides high capacity and long-lasting working process without any problems. This machine would be perfect for factories and shops with bigger than usual quantitie... more
6

Multi Chamber baler, vertical baler STRAUTMANN MK 1100 mit 2 Presskammern

8.500  €
Starting price not including VAT
Submit request
Hessisch Lichtenau, GermanyGermany dealership location
6575 km
2008
used
8.500  €
Starting price not including VAT
Submit request
Call
Multi Chamber baler, vertical baler STRAUTMANN type MK 1100 Fabr. No. 50100554 built in 2008 Pressing force of 20 ton. Press room floor space 1130 x 700 mm Filler 1100 x 700 mm Bale size 1130 x 700 mm Bale height of 800 mm Bale weight approx. 250 kg Motor power 4 kW Power supply 400 Volt, 50 Hz -Built-in hydraulic unit -mechanical interlocking Bcv30go0kv -Automatic mode and 2-hand operation -two pressure chambers for different materials ([...] Film + cardboard) -subsequently expan... more
3

Vertical baler press KK Balers KK Mini Baler

Hardinxveld-Giessendam, NetherlandsNetherlands dealership location
6242 km
2007
used
Request priceCall
KK Balers vertical baler, type Mini Baler Ssmbvg - Dimensions 1040 x 750 x 2335 mm - Transportation height 1800 mm - Machine weight 270 kg - Feed aperture 700 x 500 x 735 mm - Bale dimensions 550 x 750 x 600 mm - Bale weight up to 75 kg more
3

Vertical baler HSM 200 VL

Lossatal OT Hohburg, GermanyGermany dealership location
6759 km
1983
used
Request priceCall
approx. 1,1 t + pressure 20 t + inlet opening 1,130 x 560 mm + bale dimensions 1,130 x 730 x 860 to 1,110 mm 7ypscekyo more
6

Vertical baler press HSM 45 VL

2.750  €
Starting price not including VAT
Submit request
Zambrow, PolandPoland dealership location
7233 km
1997
used
2.750  €
Starting price not including VAT
Submit request
Call
Producer: HSM Td7vswij Typ: 45 VL Presskraft: 5 t Anschluss: 400 V Ballengroesse: ca. 70 x 50, h 45 cm Masse: 75 x 85, h 210 cm more
5

Vertical baler DIXI 18 S

Billigheim, GermanyGermany dealership location
6638 km
2006
used
Request priceCall
Vertical baler Pressure 18 to 7gry2ksle Year of production 2001 bale weight 120 - 180 kg strapping 4-fold vertical, manuell Overhauled and in a good condition more
5

Vertical baler Orwak 8020 (3 chambers) Orwak 8020

4.200  €
Fixed price not including VAT
Submit request
Bydgoszcz, PolskaPoland
6981 km
good (used)
4.200  €
Fixed price not including VAT
Submit request
Call
Vertical baler Orwak 8020 (3 chambers) Used machine Pressure: 20 tons Price: 4200 Euros Technical description of the machine: Pressure: 20 tons 2sjkzk2p Bale dimension: 1100 x 700 x 800 Bale weight: between 200-300 kg (depends on the material) Electric Power supply: 380V / 2,2 kW 3 months guarantee! Machine is ready for selling! In case of questions, please contact us! more
6

Vertical baler HSM Pressen GmbH & Co. KG HSM 225.1 VL

5.000  €
Starting price not including VAT
Submit request
Hessisch Lichtenau, GermanyGermany dealership location
6575 km
1997
used
5.000  €
Starting price not including VAT
Submit request
Call
Vertical baling presses HSM presses GmbH & Co. KG type HSM 225.1 VL Fabr. No. 6124.814.00206 L year 1997 Pressing force 25 ton. Press plate hub 910 mm Cycle time per stroke approx. 30 sec. Press room - floor area 1200 x 900 mm Press room height 1650 mm Filling opening 1200 x 660 mm Filling height 990 mm bale size 1210 x 900 mm Bale height 900 mm Hydraulic operating pressure bar 245 Motor output 5.5 kW Power supply 400 Volt, 50 Hz -Built-in hydraulic unit -Hydraulic door lock -Auto... more
3

Hydraulic vertical baler HSM 75 VL

Dabergotz, GermanyGermany dealership location
6679 km
1999
used
Request priceCall
Pressure 9 tonnes bales performance 4-8 per hour Pressing time including return stroke 21 sec Presskastenmasse B 900 X 600 x H 1050 mm loading aperture B 900 x H 600 mm max bale size 900 x 600 x 550 mm bale weight approx. 70-120 kg, depending on the material, motor 2,2 kW, 380 V, 50 Hz dimensions B 1100 x T 820 x H 2150 mm Filling height 600 mm, weight: 670 kg S0bzarlf more
5

Vertical baler HSM 155 VL

More Hsm 155 Vl
Billigheim, GermanyGermany dealership location
6638 km
1994
used
Request priceCall
height of machine - 2270 mm weight of machine - 940 kg Year of construction - 1994 Ftzztg2 Motor - 4 kW, 380 V pressing pressure - 16 to Bale weight - 110 - 200 kg Loading opening - 1100 - 590 mm bale binding - 4-fach - vertikal Output per houer - 4 - 8 exterior dimensions - 1450 x 926 mm filling space - 1100 - 700 x 1130 mm more


baler vert...
daily

New machines via email!

Stay updated!
2

Vertical baler press GTG G1

Billigheim, GermanyGermany dealership location
6638 km
used
Request priceCall
GTG Mahlberg type G1 - vertical baler I3clfrb No. 90/47 Type: G1 Motor: 1.5 kW, 380 v Filling Chamber: 700 x 600 x 850 mm height Setting: 3 + 2 Machine weight: 200 kg Please request price more
6

Vertical baler press ORWAK 5030

Billigheim, GermanyGermany dealership location
6638 km
used
Request priceCall
Vertical baler press Motor 230 V, 50 Hz, 10 A Bale format 500 x 800 mm h Ntg9mcsdg Exterior dimensions 980 x 740 x 1950 Pressure 3 ton Strapping by hand Weight of machine 310 kg more
3

Vertical baler press Loedige EP I

1.500  €
Starting price not including VAT
Submit request
Billigheim, GermanyGermany dealership location
6638 km
1977
used
1.500  €
Starting price not including VAT
Submit request
Call
Loedige (Loedige) baler, vertical 2 chamber baler Technical data: pressing chamber size (cabinet) 600 x 700mmx 900mm Engine 1,5 kW Tying 3 + 2 overall heigt 2.050mm Machine dimension 1.680 x 880 x 2.050 mm checked and ready to work Ogfo8mtkh ----- Prasa pionowa ----- more
1

MACHINING CENTER - CNC (VERTICAL) BROTHER TC-32A

More Brother Tc 32
23.469  €
Fixed price not including VAT
Submit request
North Carolina, United StatesUnited States dealership location
518 km
2000
used
23.469  €
Fixed price not including VAT
Submit request
Call
Elect./Voltage: 230 V, 60 Cy, 1 Ph. C0nff8p BROTHER TC-32A CNC Drill/Tap CenterSpecifications: -- X axis travel 17.71". -- Y axis travel 12.59". -- Z axis travel 16.14". -- Distance from table to spindle 7.87"-24.01". -- Table size 21.65"x13.77". -- Max load weight 176 lbs. -- Spindle speeds 12-12,000 rpm. -- Spindle taper hska40. -- Spindle drive 7.5 hp/5 hp. -- Rapid traverse 1968 ipm. -- Cutting feed 787 ipm. -- Machine dimensions (approx) 130"x70"x93"h. -- Machine weight (app... more
1

CNC Vertical Machining Centres MAZAK VTC20B Vertical Machining Centre with Mazatrol T-Plus Control.Travels 1040mm x 510mm x 500mm

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1992
ready for operation (used)
Request priceCall
Table size 1460mm x 510mm Speeds 10,000 rpm Spindle taper BT40 Grt9hpp Automatic tool changer 24 Station more
4

milling machining centers - vertical BEAVER Partmaster-Toolmaster

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
used
Request priceCall
x-travel 500 mm Wufbs y-travel 400 mm z-travel 400 mm Control Heidenhain-Fanuc weight of the machine ca. 4.5 t more
6

Baler 60 tons, short construction, big feed funnel Strautmann Bale Tainer

Scheemda, NetherlandsNetherlands dealership location
6317 km
2010
used
Request priceCall
Manufacturer Strautmann Typ Bale Tainer Year of construction 2010 Hours of operation 4.100 hours Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 1,100 x 700 mm (w x d x h) Driving motor 9,2 kW Connected load 15 kW Ptrqyu Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 1200 Operating panel (manuf., type) Siemens Simatic Touch Panel Baler dimensions built up with hopper appr... more
1

Vertical Band Saw Wadkin 35/18

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Request priceCall
0vu3diq more
3

Machining Center - Vertical QUASER MV-204 CPL/12

Monheim, GermanyGermany dealership location
6403 km
2011
used
Request priceCall
x-travel 1.500 mm y-travel 700 mm z-travel 610 mm Control Fanuc 18i-MB turning speeds 12.000 U/min table dimensions (lengthxwidth) 1.700 x 700 mm workpiece weight 2.000 kg tool change unit 48 tool adaptor ISO 40 Bbqmlaev8r max. torque 191 Nm engine output 30 kW weight of the machine ca. 95 t dimensions of the machine ca. 4.475 x 2.952 x 3.030 m - new spindle December 2017 - chip conveyor - internal cooling through spindle center 20 bar - coolant system with 600 l volume, with efficient fi... more
1

MACHINING CENTER - CNC (VERTICAL) ELDORADO M90-0027

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Request priceCall
Elect./Voltage: Bbu7wruygj ELDORADO #M90-0027 "MEGA 75" Deep Hole Gun DrillsSpecifications:Spindle Speeds, Infinite Range 1455 To 11740 RpmFeed Range, Infinitely Variable .100 To 99.9 Ipm(2) Spindle Motors Horsepower 3 Hp EachCoolant System Capacity 90 GallonsCoolant PressureTo 1500 PsiCoolant Flow RateTo 18 GpmCoolant Dimensions, L X W 75" X 32"Coolant Heigh t35"Note: This System Was Designed With Two SeperateDrills That Can Be Run Off Of One High-PressureCoolant [...] WITH:(2) M90-0027 Eldo... more
1

CNC Vertical Machining Centres BRIDGEPORT VM560 Vertical Machining Centre with Heidenhain 2500 Control. Travels 580mm x 410mm x 480mm

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1996
ready for operation (used)
Request priceCall
Table size 840mm x 420mm Wxalo Speeds 6000 Spindle taper BT40 Input 7.5kW more
3

Milling Machine - Vertical WANDERER KFV 311

2.200  €
Starting price not including VAT
Submit request
Bremen, GermanyGermany dealership location
6424 km
1969
used
2.200  €
Starting price not including VAT
Submit request
Call
x-travel:1230 mm y-travel:355 mm z-travel:440 mm total power requirement:12 kW table-size:1600 x 400 mm tool taper:SK 50 speeds:28 - 1400 U/min Xobmxvax feed - longitudinal/cross:16 - 2500 mm/min feeds Z-axis:12,5 - 1000 mm/min weight of the machine ca.:4,2 t dimensions of the machine ca.:1,9 x 4,0 x 2,2 m more
4

Vertical Turret Lathe - Double Column SCHIESS VK 3500/5900

Mönchengladbach, GermanyGermany dealership location
6371 km
used
Request priceCall
faceplate diameter:3500 mm swing diameter:5900 mm Mxnpn turning height:1300 mm slide stroke:900 mm faceplate turning speed range:0,1 - 30 U/min total power requirement:70 kW weight of the machine ca.: t dimensions of the machine ca.: m CNC HEIDENHAIN TNC 145 CS 2 Ram´s more
1

Vertical Band Saw Wadkin Unknown

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Request priceCall
Gu8ni33r more
6

Baler press power 60 tons, drive power 9,2 kW Strautmann Bale Tainer

Scheemda, NetherlandsNetherlands dealership location
6317 km
2011
used
Request priceCall
Manufacturer Strautmann Typ Bale Tainer Year of construction 2011 Hours of operation 3.057 hours Quantity of pressed bales 138 pieces Press power main press 60 tons Feed channel 2,815 x 1,085 mm (l x w) Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 9,2 kW Connected load 15 kW Tying system 4 fold vertical, fully automated Bale weight up to 400 kg, depends on material SPS controller (manuf., type) Siemens S7 300 Operating panel (manuf., type) Siemens Simatic Touch Panel Baler di... more
1

MACHINING CENTER - CNC (VERTICAL) FEELER TV-510A

19.628  €
Fixed price not including VAT
Submit request
North Carolina, United StatesUnited States dealership location
518 km
2006
used
19.628  €
Fixed price not including VAT
Submit request
Call
Elect./Voltage: Cxxktkg FEELER TV-510A Drill & Tap CenterSpecifications: -- Table size 27.6" x 15.7". -- X travels 20". -- Y travels 15.75". -- Z travels 15.75". -- Spindle speed 10,000 rpm -- Spindle taper 30 -- Spindle motor 5/7.5 -- Automatic tool changer positions 12Equipped with: -- Fanuc 0imd CNC control -- Chip conveyor and coolant tank more
1

CNC Vertical Machining Centres MAZAK VTC200C 4 Axis Vertical Machining Centre with Mazatrol Fusion 640 Control. Travels 1600mm x 510mm x 500mm

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Request priceCall
Table size 2000mm x 510mm Speeds 10,000 rpm Zf899dq Spindle taper BT40 Fitted with 4th Rotary Axis more
6

Machining Center - Vertical DMG DECKEL MAHO DMF 220 linear

Remscheid, GermanyGermany dealership location
6419 km
2008
used
Request priceCall
x-travel 2200 mm y-travel 560 mm z-travel 720 mm Control Heidenhain iTNC 530 table surface area 2600 x 600 mm table load 2,2 t turning speeds 20 -12.000 U/min taper ISO SK 40 tool change unit 30 -fach rapid traverse 50 m/min Number of working hours ca. 25.000 h spindle hours ca.8.100 h total power requirement 36 kVA weight of the machine ca. 12,5 t dimensions of the machine ca. 4,40 x 2,45 x 2,65 m DECKEL MAHO DMG DMF 220 Linaer equipment ----- direct weighing system Bb8lozwho0 IKZ 6... more
2

Special Edition Car baler Lollini A5000 HS

Egyesült KirályságUnited Kingdom
5599 km
2007
good condition (used)
Request priceCall
Manufacturer: Lollini Model: AL5000 HS Mobile Year of Manufacture: 2007 Axial Thrust: 160 t (on each of the two opposing cylinders) Minimum Bale Dimensions: 1000 x 600 x 200 mm (7 inch minimum variable) Idle Cycle Time: 55 seconds (50s with automatic cycle) Working Pressure: 220 bar (maximum axial cylinder 260bar) Piston Pumps: 226cc (2off) Diesel Engine: 6-cylinder (200hp) Iveco water cooled with PLC control and electronic check up Opened Charging Box: 5000 x ... more
1

Vertical Band Saw Wadkin 35/18

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Request priceCall
Hpprjlcqs more
5

Vertical Turret Lathe - Single Column DÖRRIES SDE 280/V5

Mönchengladbach, GermanyGermany dealership location
6371 km
1976
used
Request priceCall
faceplate diameter:2800 mm 02p977u3d swing diameter:6000 mm turning height:2500 mm faceplate turning speed range:2,12 - 112 U/min max. ram stroke:1000 mm max. workpiece weight:60.000 kg feeds:0,71 - 128 mm/min rapid traverse:2 m/min total power requirement:65 kW weight of the machine ca.:55 t dimensions of the machine ca.: m DRO Heidenhain more
1

MACHINING CENTER - CNC (VERTICAL) HAAS MDC-1

26.775  €
Fixed price not including VAT
Submit request
North Carolina, United StatesUnited States dealership location
518 km
2003
used
26.775  €
Fixed price not including VAT
Submit request
Call
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Bbu7t20fsa HAAS MDC-1 CNC Drilling & Tapping -- Haas 32 32 Bit Control. -- X-Axis travels 20". -- Y-Axis travels 16". -- Z-Axis travels 15.5". -- Spindle motor 15 HP. -- Spindle speed 10,000 RPM. -- Dual pallet. -- Automatic tool changer positions 24. -- Table size 15" x 26". -- Spindle taper 40. -- Under 7000 spindle hours. more
6

Machining Center - Vertical QUASER MV184

More Quaser Mv 184
Monheim, GermanyGermany dealership location
6403 km
2010
used
Request priceCall
x-travel 1.020 mm y-travel 610 mm z-travel 610 mm table dimensions (lengthxwidth) 1.200 x 600 mm table load 500 kg spindle taper BT 40 spindle turning speed range 10.000 - 12.000 U/min tool changer Bbqmkwtqkq tools in tool magazin 30 diameter of tools max. 76,2 mm workpiece length 280 mm weight of the machine ca. 7.390 kg dimensions of the machine ca. 2,92 x 2,82 x 2,86 m - chip conveyor - coolant system incl. inner coolant supply 20 bar + air through spindle more
5

Vertical Turning Machine DMG GILDEMEISTER CTV 250 V3

Remscheid, GermanyGermany dealership location
6419 km
2001
used
Request priceCall
spindle passage 79 mm Control Siemens 840D Bdh0bwui turning diameter 250 mm swing diameter 320 mm turning height 250 mm rapid traverse X-axis 100 m/min spindle turning speed range 20-5000 U/min main drive motor 21 kW rapid traverse Z-axis 45 m/min weight of the machine ca. ca. 7.5 t more
6

Milling Machine - Vertical LAGUN MC 1000

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1998
used
Request priceCall
x-travel 1000 mm y-travel 500 mm z-travel 510/111.5 mm Bcoqz90soy control Heidenhain TNC 410 weight of the machine ca. 6,3 t dimensions of the machine ca. 2240x2930x2750 mm more
1

5-axis Vertical Machining Centre DMG DMU 60 eVo

United KingdomUnited Kingdom
5599 km
2013
good condition (used)
Request priceCall
Heidenhain iTNC 530 X/Y/Z travels 600/500/500 mm B-axis -5° / +110° C-axis 360 x 0.001° 5-axis simultaneous Table ø 630 mm Max table load 400 kg Turn-mill table speed 1200 rpm Rapids X/Y/Z 50000/50000/50000 mm/min Spindle speeds ~ 18000 rpm Spindle power 24/16 kW HSK A63 Trhough spindle coolant 40 bar ATC 30 Measuring probe Tool breakage control Chip conveyor Bczcn73dlu Oil mist extractor more
5

Key-Way Milling Machine - Vertical BUSCH NF1 CNC

Mönchengladbach, GermanyGermany dealership location
6371 km
1987
used
Request priceCall
groove width:16 mm x-travel:1000/1500 mm throat:200 mm y-travel:150 mm Fkytawfge z-travel:150 mm spindle taper ISO:40 spindle motor:3 kW spindle turning speed range:300 - 3600 U/min quill stroke:150 mm diameter of quill:100 mm table surface area:1800 x 250 mm total power requirement:9,5 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:3,5 x 2,7 x 2,5 m CNC SIEMENS 810 M Indexing head with tailstock 4-fold toll changer table mounted more
1

MACHINING CENTER - CNC (VERTICAL) MORI SEIKI NV-5000B/50

64.005  €
Fixed price not including VAT
Submit request
North Carolina, United StatesUnited States dealership location
518 km
2004
used
64.005  €
Fixed price not including VAT
Submit request
Call
Elect./Voltage: Bbuxjz39e0 MORI SEIKI "NV5000B/50" VERTICAL MACHINING CENTER -- Table Size: 52" x 23.6" -- Max. Table Capacity: 2,6540 lbs. -- X-Axis Travel: 40.20" -- Y-Axis Travel: 20.1" -- Z-Axis Travel: 20.1" -- Rapid Traverse: 1,653 IPM -- Cutting Feed Rate: 1,653 IPM -- Spindle Nose to Table: 5.9" - 26" -- Spindle Taper: 50 -- Spindle Speed: 8,000 RPM -- Spindle Motor: 40 HP -- Tool Changer Stations: 30 -- Machine Weight: 14,500 [...] with: -- MS... more
2

Surface Grinding Machine - Vertical FRIEDRICH SCHMALTZ [...] 3/1500

Stockstadt, GermanyGermany dealership location
6564 km
1952
used
Request priceCall
grinding length:1500 mm Fnzwz7x grinding width:375 mm workpiece height:500 mm spindle drive:15 kW Clamping area:1600x375 mm total power requirement:21 kW weight of the machine ca.:5500 kg more
6

Machining Center - Vertical STYLE BT-2000

Dreieich, GermanyGermany dealership location
6568 km
2007
used
Request priceCall
x-travel 2000 mm y-travel 800 mm z-travel 700 mm CNC-control Style table-size 2150 x 600 mm max. table load 2000 kg throat 880 mm spindle taper ISO BT-40 feed stepless 2000 mm/min spindle turning speed range 6000 U/min Msip2w drive capacity - spindle motor 15 kW tool change unit 24 Pos. coolant voltage 400 V total power requirement 20 kVA weight of the machine ca. 8 t dimensions of the machine ca. 4,75 x 2,70 x 2,9 m - Serial-No.: STYLE-BT2000-BT2070217 more
4

CNC Vertical Turning Lathe Hitachi Seiki CS-20

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1998
good (used)
Request priceCall
Maximum turning diameter 350 mm. Maximum swing 350 mm. Maximum spindle bore for bar work 59 mm. Spindle speed 30-5000 Rpm. Maximum turning length 150 mm. Number of tools on turret 12. Ekdo2isdi Tool type VDI 40. CNC control Seiki Seikos Ʃ10L more
3

milling machining centers - vertical CHEVALIER 2040 VMC-L

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
2001
used
Request priceCall
x-travel 1050 mm y-travel 500 mm z-travel 500 mm control Sinumerik 802D weight of the machine ca. 5,5 t Hfndxipgw more
5

Vertical Turret Lathe - Double Column STANKO 1525

Mönchengladbach, GermanyGermany dealership location
6371 km
used
Request priceCall
faceplate diameter:2240 mm swing diameter:2500 mm turning height:1600 mm slides vertical travel:1200 mm C2ljnkm88 workpiece weight:16 t horizontal adjustment:1390 mm angle adjustable from - to:+ - 30 Grad faceplate turning speed range:1,6 - 80 U/min main drive motor:65 kW total power requirement:70 kW weight of the machine ca.:36 t dimensions of the machine ca.:5,4 x 5,1 x 5,0 m In 2008 complete overhauled with new electric with two vertical RAM´s 4-axes digital readout HEIDENHAIN 2 gear ste... more
1

SHREDDER (PAPER) & BALER ALLEGHENY SHREDDERS 30-500

40.025  €
Fixed price not including VAT
Submit request
North Carolina, United StatesUnited States dealership location
518 km
2002
used
40.025  €
Fixed price not including VAT
Submit request
Call
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bctiodr89r ALLEGHENY COMPLETE SHREDDING SYSTEM -- ALLEGHENY SHREDDER 30-500 -- 75 HP motor -- 30" Wide opening -- 5/8" shred width -- 12" Crusher paddle -- 97 feet per minute input speed -- 15 Feet long output conveyor -- 16,000 working hours -- ALLEGHENY 3430-2572 HORIZONTAL CLOSED DOOR BALER -- 25 HP motor -- 7" Cylinder -- Bale size 72" x 30" x 40" -- Bale weight 1,500 lbs. more
4

vertical Milling Center Alzmetall CS 600

Heilbronn, GermanyGermany
6642 km
2006
good (used)
Request priceCall
CNC control Heidenhain iTNC530 electronical hand wheel 24-fold automatic tool changer chip tank coolant through spindle exhaustion device Technische Daten / technical details: Verfahrweg X / X-Travel 600 mm Verfahrweg Y / Y-Travel 400 mm Verfahrweg Z / Z-Travel 900 mm Tischgröße / table size 750x450 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed range 50-13000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 Eilgang X,Y,Z / rapid feed X,Y,Z 40,... more
4

Vertical Turning Machine SCHUSTER VTM 650

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2004
used
Request priceCall
x-axis 200 mm z-axis 650 mm w-axis 750 mm centre distance 650 mm diameter max. 200 mm turning length 650 mm Haebl3cb System: Bosch Rexroth 200 Interface: floppy disk Accessories: time magazine / feed belt, Chip conveyor and handwheel more
6

Vertical Turret Lathe - Single Column FRORIEP DS 12 CNC

Monheim, GermanyGermany dealership location
6405 km
used
Request priceCall
faceplate diameter 1400 mm swing diameter 1450 mm turning height 1630 mm max. workpiece weight 6300 kg reus 10 - 315 U/min cross rail adjustment - vertical 1250 mm max. ram stroke 1100 mm Control Siemens 840 D total power requirement 0 kW weight of the machine ca. 0 t dimensions of the machine ca. 4,35 x 2,85 x 5,1 m Bbmisiyeam * general reconditioned and modernized in 2001 * CNC - control by SIEMENS SINUMERIK 840 D * chip conveyor machine wasnt in use in production since 2008 more
5

CNC 5-Axis Vertical Machining Centre Mazak Variaxis 500-5x II

More Mazak Variaxis 500
Zevenbergen, NetherlandsNetherlands
6233 km
2012
good condition (used)
Request priceCall
Bcauglvkk3 Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Number of tools in magazine 80 pieces. Maximum spindle speed 18.000 R/min. Tool taper CAT 40. CNC control Mazatrol Matrix more
5

Machining Center - Vertical DMG DMU-80T

Mönchengladbach, GermanyGermany dealership location
6371 km
1996
used
Request priceCall
x-travel:800 mm y-travel:650 mm z-travel:550 mm quill stroke:90 mm Mtr3n spindle taper ISO:40 swivelling of milling head:+/- 60° Grad table surface area:1100 x 600 mm spindle turning speed range:1 - 6300 U/min feed speeds:1 - 10000 mm/min rapid traverse:15 m/min workpiece weight:600 kg total power requirement:22 kW weight of the machine ca.:6 t dimensions of the machine ca.:5,5 x 3,5 x 3,1 m CNC control Mill Plus automatic toolchanger 25-stations chip conveyor and coolant attachment oil mist ... more
1

VERTICAL LATHE BULLARD 42" CUTMASTER

North Carolina, United StatesUnited States dealership location
518 km
1954
used
Request priceCall
Elect./Voltage: Zetv2u BULLARD CUTMASTER 42 Vertical Turret Lathe -- Table Diameter: 42″ -- Max Swing With Side Head Down: 54″ -- Max Swing With Side Head Up: 45″ -- Vertical Travel of Turret: 30-3/8″ -- Vertical Travel of Side Head: 37-1/4″ -- Max Height Under Rail: 37″ -- Max Height Under Turret Head: 48-1/4″ -- Table Motor: 30 HP -- Table Speeds: 4 – 150 RPM -- Machine Dimensions: 117″L x 105″W x 122″H -- Machine ... more


baler vert...
daily

New machines via email!

Stay updated!
Save search query

to

to

Edit search
BALER VERTICAL
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Find out more
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
Listing on Machineseeker
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close