Used Vertical Carousel for sale (7,505)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 4,100 mm, total width: 3,420 mm, total length: 1,765 mm, load capacity per storage section: 244 kg, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, input current: 8 A, Vertical carousel (lift system) for storage and retrieval of goods. Hänel Rotomat systems operate on the principle of a circulating shelf system (“paternoster”) and enable space-saving, ergonomic material handling. Fpsdsx Aqcfspfx Ab Usr

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 2 identical machines available External dimensions: Height 4340 mm Width 3270 mm Depth 1680 mm 26 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm Fpedpfx Abjdnh R Ho Ujr W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 120 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: gray / gray, Surface cleaned, signs of wear and minor deformations possible Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors, technical changes, or deviations in detail in the illustrations. Photos of a similar machine. Assembly currently mainly in Germany, Austria, and some neighboring countries.

Condition: excellent (used), functionality: fully functional, JUNGENTHAL KE-1200 VERTICAL BORING MILL MAX. SWING: 1300 MM Fpjdpfxjxlafzo Ab Uer MAX. HEIGHT: 1000 MM COMES WITH ELEVATING RAIL AND SIDE RAM

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm Fpedpferw A Eiex Ab Ujr W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system upgrade available 2 identical machines available External dimensions: Height 4730 mm Width 3270 mm Depth 1680 mm 29 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Fodpfx Aednhz Ujb Uspr Intermediate shelves are available for 0 support sets, allowing a payload of 160 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: Gray / Gray Surface cleaned, signs of wear may occur Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors and technical changes or deviations in details in the photos. Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Fsdpfjd Spf Rsx Ab Uopr Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Fpjdpfx Aodnzg Nob Uer Height 5860 mm Width 2940 mm Depth 1180 mm 25 carriers with a payload of 165 kg each with clear usable dimensions: H = 380 mm W = 2500 mm D = 410 mm Chain pitch 412 mm Total payload up to 4110 kg Storage table at 1000 mm above the top floor with rubberized worktop Color: GRAY/BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 volts Base machine for this modernization: SYS 180 from Kardex Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany and Austria and several neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5750 mm Width 3350 mm Depth 1550 mm Fpodpfxodvlt Hs Ab Ujr 26 supports for a payload of 250 kg each In the clear usable dimensions: H = 335 mm W = 2650 mm D = 450 mm Chain jump 381 mm Storage table at a height of 1000 mm above the top of the machine - wood/rubber worktop Color: gray/blue Surfaces cleaned, signs of wear possible Motor power: 1 x 3.0 kW / 400 volts Subject to errors, technical changes, or deviations from details in photos Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Handwheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79001 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Fjdpfxexxbzws Ab Ujpr Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), functionality: fully functional, overall weight: 600 kg, power: 30 kW (40.79 HP), protection type (IP code): IP55, Metso SRDS-7 vertical slurry / drainage pump system with Busck Electric motor. The unit is designed for continuous operation in pits, reservoirs or sump applications where abrasive slurry, slag, condensate or process water must be recirculated or discharged. The pump comes from an industrial facility in Elektrėnai (LT). It has been in operational use and is built for heavy-duty, long-term service in harsh environments. Technical Specifications Brand: Metso Minerals (Finland) Model: Metso Slurry Pumps (MHC / SRD series) Type: Vertical slurry / slag / drainage pump Construction: Heavy-duty vertical installation, works submerged in a reservoir or pit Application: Slag recycling, condensate recirculation, slurry pumping Motor Fsdpfxexy H Tbo Ab Ujpr Brand: Busck Electric (Denmark) Model: Y2-200L-4 Power: 30 kW Speed: 1470 rpm Enclosure: IP55 (dust & water protected) Efficiency class: EFF2 Insulation class: F Duty cycle: S1 (continuous) Voltage: 380–415 V Δ (Delta) 660–715 V Y (Star) General Estimated total weight: ~600 kg Condition: Used, operational when removed Mounting: Heavy steel frame with vertical drive shaft Included Complete vertical pump assembly Busck 30 kW motor Steel support frame Belt drive guard (yellow) All seen components in photos

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 Fpjdpfx Abexpqm Ro Uer CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Condition: used, Vertical insulated tank 100m³ Diameter 3.85m Height 11.25m The tank is insulated with mineral wool It is lined with trapezoidal sheet metal It has space for a side agitator The tanks are dismantled, ready for loading. Fjdpfx Aexl Th Neb Uopr

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Db-6 v Description: Fodpfofd Rxqex Ab Uepr VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. Fpedpfxoxryafo Ab Uer General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Fpsdpfownx H Eex Ab Uer Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Fodpfx Aboq U A Hue Uspr

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2025, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. Fpjdpfxswnp Ake Ab Ujr It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. For more information please call us.

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. Fedohr Rp Sepfx Ab Uspr 12 cm insulation, insulated with wool and metal sheet lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Condition: new, Year of construction: 2025, table width: 450 mm, table length: 900 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, number of spindles: 1, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Fpsdsxc I Dgspfx Ab Usr Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: new, functionality: fully functional, color: yellow, overall weight: 19,000 kg, Year of construction: 2025, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Speed: 50 – 70 ms Fpodpfjxckf Hjx Ab Usr Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap – Automatic lubrication system

Condition: good (used), Vertical steel tank 60,000l diameter 2.82 m total height 11 m Fpedstwwv Nepfx Ab Uer a hatch at the top of the upper floor and at the bottom on the side of the cylinder. Each tank can be painted with epoxy resin coat, or sold sandblasted (no coat). 12 units available

Condition: excellent (used), Year of construction: 2001, Type: Horizontal / Vertical Serial number: 61937 / 61938 Year of construction: 2001 Diameter: 250 mm Pitch: 190 mm Infeed height: 1000 mm Fpsdpfx Absttzfco Usr Outfeed height: 2150 mm Power: 3 x 400V, 50Hz, 15kW Dimensions: 3800 x 1200 x 3200 mm Screw conveyor with turnable outfeed shute

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 28,000 mm, type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, Excellent condition vertical conveyor, 2800 cm height, year 2019, with documentation and manuals, lightly used. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Fpedpfxexu Iuvo Ab Uor

Condition: ready for operation (used), Year of construction: 2015, The StyleShoots Vertical is a product photography rig with built-in lighting, tablet-based control, and a Canon EOS 5D Mark III. Length: 4100mm, width: 2050mm, height: 4100mm, very little documentation available, an inspection is possible. Fpodpfx Asqpgg Tjb Usr

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1120 000155 3, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item by 16.01.2026! For loading, a complete semi-trailer with a height of 3 m is required. The consignment comprises 8 packages. Fedpoxywlzofx Ab Uspr