Battery strapping tool buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
4

Strapping tool TECNA 9357

Solingen, GermanyGermany dealership location
6408 km
2016
used
weight max. in kg 18 kg Fhkbpri2g more
1
We offer you, a used strapping machine by the manufacturer of Signode. Type: E2000 with foot control, documentation and schematic. During the test the engine 4 has performed umreifungen without any problems, then it has not more properly retracted the band. Will be a setting. Ncvud Main switch knob needs to be replaced, it turns out. Our offer is aimed at commercial persons covered in the sense of the Gewerbeordnung GewO according to § 14. The offer is subject to change reserved, ... more
1
Gylzjylgm used blind rivet setting tool GESIPA Akkubird with battery and charger (both new and unused) more
2
consisting of: 1-part tensioning and sealing apparatus sealing sleeves strap 16 mm wide trolley for coil diameter max. 600 mm - 150 mm wide width / depth / height = 600/400 / 1,040 mm 40 kg Xozhtn2pk more
6

strapping tool A.V.M van den Berg GmbH HSW-S 20

Rietberg-Mastholte, GermanyGermany dealership location
6469 km
2001
used
technically and visually very good machine. Is power and can be tested at any time in the normal. Xfqp9wetu more
2

Steel strapping Handtool Cyklop OR-H 21A

Dabergotz, GermanyGermany dealership location
6679 km
used
Steel strapping Handtool Freleedw Pneumatic tensioning and closing for straight-surfaced packages. more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Glyb937dw AMERICAN TOOL INC. 2516-24F3 32" x 120” Engine Lathe Specifications: -- Swing over bed ways 33-1/2". -- Swing over carriage wings 24”. -- Swing over cross slide 24". -- Distance between centers 120". -- Number of spindle speeds 27. -- Spindle speeds 12 - 800 rpm. -- Length on bed 32-5/8”. -- Spindle hole 2-1/2". -- Headstock center #5. -- Radial load at 100 rpm front bearings 27,800 lbs. -- Spindle mount l2. -- Sp... more
13

Slotters BUTLER 8" / 203mm Precision Toolroom Slotter

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 24684 Table size Indexing 20" / 508mm Diameter Table left/right 18" / 457mm Table in/out 18" / 457mm Table rotates 360 Degrees Throat 18" / 457mm Daylight 16" / 406mm Ram Tilts 0-5 Degrees Speeds 40-105 SPM Feeds 0.004" x 0.028" / 0.1016mm x 0.7112mm Ddlkpf7 Input 380/420/3/50 ac 2 hp Fitted with Push Button Starter Length 8' / 2.44m Width 4'10" / 1.47m Height 7' / 2.13m Nett weight approx. 2 Ton 10 cwts / 2540 kgs more
12

Tool & Cutter Grinder C&H

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Grinding wheel approx. 150 mm Gvnfz8 more
3
SCHNEEBERGER sharpening machine, type Centromat Hcmlipzka more


battery st...
daily

New machines via email!

Stay updated!
5
Rohrausklink tool, pipe Notchers -Max Rohr diameter 60 mm Liycv -Exzenter voltage Pipe mount swivel Dimensions 480/160/H380 mm Weight 28 kg more
3

tool presetter ZOLLER H 420 D

Mönchengladbach, GermanyGermany dealership location
6371 km
1998
used
measuring range X-axis:300 mm 9nvxpki29 measuring range Y-axis:400 mm Table dimensions:450 mm tool diameter:ISO 40 mm amplification -fold:150/20 weight:0,5 t total power requirement:1,5 kW dimensions of the machine ca.:1,8 x 1,0 x 1,8 m Machine with indexing device for ISO 40 and collet clamping - pneumatic saddle and tool clamping - measuring computer with screen and printer more
1
Elect./Voltage: 39lyxkhx SUPERMAX MAX 8 VERTICAL MACHINING CENTER -- Table Size: 67" x 25" -- Spindle Nose to Table Top: 7.87" - 35.43" -- X Axis Travel: 64.96" -- Y Axis Travel: 27.56" -- Z Axis Travel: 27.56" -- Rapid Traverse Rate(X & Y): 590 IPM -- Rapid Traverse Rate (Z): 472 IPM -- Cutting Feed Rate: 196 IPM -- Spindle Speeds: 4,000 RPM -- Spindle Taper: CAT 40 -- Spindle Motor: 15 HP -- Tool Changer Capacity: 30 Stations -- Max Tool Weight: 22 lbs. -- Approx. M... more
22

Tool Presetter Zoller Smile 400/6

More Zoller Smile 400
Amsterdam, NetherlandsNetherlands dealership location
6220 km
2009
ready for operation (used)
TFT screen, keyboard, label printerDEWerkzeugeinstellgeraet (int. Nr. 00558), #305TFT-Monitor, Tastatur, Etikettendrucker Bclxhalise more
4
x-travel 310 mm Srbprw y-travel 170 mm z-travel 340 mm spindle head ISO 40 table-size 215 x 600 mm feeds 16, von 9-450 mm/min spindle taper SK 40 spindle turning speed range 50 - 2500 U/min Drive 1,4 / 2,3 kW switchgear cabinet weight of the machine ca. 900 kg dimensions of the machine ca. 1,1 x 1,1 x 1,3 m Condition: ready for operation Angle table ( fixed ) Machinefeets 4 Vertical milling head with quill adjustment Electric 380 Volt Construction same as Deckel FP 1. Machine d... more
4
Test tool for power Uvjp8xg8 -3 x available Price per piece Weight 4,2 kg more
3

Toolcupboard

Mönchengladbach, GermanyGermany dealership location
6371 km
used
length:650 mm Fq2exi208 width:600 mm height:800 mm weight approx.:50 kg more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 33pmk0gb SUPERMAX TOOLS SUPERBRUSH 36X2 Dual Head Brush Sander;SUPERBRUSH applications include, but are not limited to: White wood sanding, de-nibbing, sealer, and primer sanding applications, as well as UV roughing and reclamation projects. De-burring, graining, and polishing of steel, stainless steel polishing and aluminum finishing and solid surface materials. These sanderr are well suited to shutter sanding, de-glossing and [...]: -- 36" Sanding width,... more
9
Serial No. 36G07892 Table Size 800 mm Swing 900 mm Height Under Cross Slide 850 mm Speeds 15 -1500 rpm (table), 0 - 3000 rpm ( milling ) Input 415/3/50 37 kW Fitted with swarf conveyor Length 11' 6" / 3.50m Width 8' / 2.44m Wvji8 Height 11' 6" / 3.50m Nett Weight Approx. 15,545 kgs more
12

Strapping Machine Signode KRS-E-200-70/70

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1994
ready for operation (used)
Ser. No. 746367DEUmreifungsautomat, #455Ser.-Nr. 746367 Bclpnir798 more
9

Eckold Eckold Eckold PFW100T Doming tool for MAX. 4 mm

Babberich, NetherlandsNetherlands dealership location
6320 km
2006
ready for operation (used)
Bch8ttqqfo more
5
High-voltage generator for testing tools Type AG-3, 7608 -Abmasse 550/200/H135 mm 8sxk2 Weight 18 kg more
4

tool presetter ZOLLER H 620 Magnum

Mönchengladbach, GermanyGermany dealership location
6371 km
1996
used
measuring range X-axis:600 mm measuring range Y-axis:300 mm Ibu7rx7r Table dimensions:d. 400 mm tool taper:ISO 40/50 total power requirement:1,5 kW weight:0,4 t dimensions of the machine ca.:2,2 x 1,1 x 1,7 m Machine complete with Computer, turntable, screens, label printer and various tapers more
1
-see photo incl. clamping device for grinding of single-lip drill E88v9d7 more
1
Control Simumeric 810T B0q3prqm Table Size 1250mm Fitted with 4 Way Indexing Turret Equipment 2 x Turning Tool Holders and 2 x Boring Bars more
12

Strapping Machine Signode LC 1000

Amsterdam, NetherlandsNetherlands dealership location
6220 km
1997
ready for operation (used)
Ser. No. 6101300DEKunststoffbandumreifungsautomat, #454Ser.-Nr. 6101300 Bclpm9ayl7 more
6

Eckold Wlater Eckold FWR1307X Stretching tool for MAX. 6 mm

Babberich, NetherlandsNetherlands dealership location
6320 km
2007
ready for operation (used)
Bch8tj9krn more
5
Tool and Cutter Grinder, grinder, angle grinder, tool grinding machine -2 diamond blade 100/150 mm Qkykmnk08 -2 wheel 200 mm Spring table -Drehmeißel Vice more
5
grinding wheel diameter 300 mm no. of working stations 5 Stück cup wheel dimensions 300 x 50 x 110 mm Kk2mcpef number of wheels 4 + 1 Stück efective widths 60 mm grinding spindle speed 1450 / 2800 U/min Motor power per sanding unit 1,1/0,5 PS weight of the machine ca. 650 kg dimensions of the machine ca. 1,55 x 1,55 x 1,35 m Condition: ready for operation Cooling equipment - Size of the support table: 480 x 180 mm - Largest slipping to steel cross-section: 63 x 63 mm - Size of the disk... more
3
gebr. Bench drilling machine make TRU TOOLS/Taiwan Model TT 18. No.: 044971 year of 1978 Spindle mount MT 2 Bohr-Ø 20 mm Throat depth 220 mm Drilling depth 80 mm Table size 280 x 280 mm 9 spindle speeds 200-3200 RPM Motor 0.75 kW External dimensions: Width 400 mm Depth 750 mm W88twdhd Height 1050 mm With Keyless chuck Albrecht 3-16 mm more
9

Sundry Machine Tools WMW ZFWZ 2000/30 2500mm Gear Hobber

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
1975
ready for operation (used)
Max. work diameter 2500mm Gear width 850mm Table size 1800mm Max. D.P. 30 Diameter of hole in the table 700mm Hob vertical traverse 850mm Ptqcsq Arbor diameters 3 x 60mm, 2 x 80mm, 1 x 50mm Coolant tank Yes Change wheel Yes Motor 48 kW Equipment Tailstock, Auto Cut, Individual Dividing, Auto Division, Tangential Cutting, 12 Work Supports, 12 Silletas (305mm width x 640mm height) Length 7000mm Width 3000mm Height 4000mm Nett weight approx. 44,500 kgs more
1
x-travel:0410 mm y-travel:350 mm Jibr20j z-travel:450 mm table-size:650x375 mm tool adaptor:SK 40 more
4

Toolholder Unbekannt

Mönchengladbach, GermanyGermany dealership location
6371 km
2014
used
tool clamping area: mm weight:0,04 t workpiece diameter: mm Tool taper:CAPTO tool taper:ISO 40 Bakbnnphzv 100 ISO 40 NC tool holders with appr. 50 x C5 Capto, 5 x C6, 7 x C4. 10 x shaft bore and 15 expansion chucks For sale as package or individual more
5
Strapping machine, packing machine, strapping machine Table 545 x 780 mm Strapping 5-16 mm Luxyf 545/780/H950 dimensions mm Weight 70 kg more
4
grinding wheel diameter 180 mm max. no. of working stations 2 Stück 9h22hoiai grinding table areas 370 x 185 mm spindle turning speed range 800 / 2400 U/min total power requirement 0,7 / 0,85 kW weight of the machine ca. 400 kg dimensions of the machine ca. 1,33 x 0,74 x 1,3 m Condition: good Electric 380 Volt Machine on both sides with each 1 grinding table Grinding table tilt adjustment 15° Grinding stroke movem. of the tables by hand lever at the standard of the machine Machin... more
1
Description: Suitable to regrind and manufacture wood and metal working tools of all kinds. Specifications: Working range: longitudinal traverse (X- axis) 460 mm, vertical traverse (Y-axis) 320 mm, cross traverse (Z-axis) 660 mm, rotary table swivelling range (C-axis) +/- 200°, work head spindle ISO 50, max. diameter of workpiece 320 mm, max. length of workpiece for peripheral grinding 350 mm, max. dia. of grinding wheel 200 mm, peak performance 7 kW, grinding spindle speed 0 - 8000 rpm., c... more
3

tool presetter KELCH 200 P

Dreieich, GermanyGermany dealership location
6568 km
1972
used
measuring range Z-axis 200 mm measuring range X-axis 80 mm tool taper Zyl. Ø60/Ø18 mm mm table-size 480 x 290 mm Mbwr3r8 more
10
used from plant disassembly Bclp8ie8vx Type: 0.5.48 025 034 441 No.: 8130506-3-2 12 tool stations Drum Ø approx. 400 mm 380 V / 50 Hz Space Lxwxh: CA. 440 x 500 x 400 mm Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more
6
turning diameter over bed 1200 mm turning diameter over slide rest 830 mm turning length 3000 mm Badvadplhy spindle turning speed range 20 - 660 U/min rapid traverse longitudinal 7500 mm/min rapid traverse cross 5000 mm/min main drive motor 56 kW bed width 692 mm Control Siemens 840 D workpiece weight max. 6000 kg max. workpiece weight between centres 4000 kg faceplate 0 mm x-axis 750 mm spindle head A2-11 spindle bore 160 mm tailstock quill diameter 125 mm tailstock quill stroke 350 mm tails... more
5
Crimping pliers, crimping pliers, cable lugs clamp, hydraulic crimping pliers -for large cable shoes -without pump 2x3dd3uh Dimensions 330/110/180 mm Weight 10 kg more
5
x-travel 500 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 18 von 40-2000 U/min feeds autom. 10-500 mm/min rapid traverse 1200 mm/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Condition: ready for operation Electric 380 Volt Vertical milling head with own feed 8ki87ejlb Cooling equipment Swiveling table 800 x 270 mm Tool milling machine with feeds and rapid traverse in all thr... more
3

Toolholder UNBEKANNT ISO 50

Mönchengladbach, GermanyGermany dealership location
6371 km
used
tool clamping area:ISO 50 mm weight:0,2 t I9ddd2l - palette with 57 SK 50 NC arbors, system KAISER (DIN 69871 AD) with drawings knobs and coolant through center, partly with knife heads and other cutters. more
6
grinding length: 450 mm centre height over plate: 125 mm workpiece length - max.: 600 mm grinding spindle - swivable: 350 ° grinding head adjustable: 15° re/li mm spindle revolutions per minute : 2200/3500/5200 U/min adjustment of spindle-head: quer/transversal 230 mm adjustment of spindle-head: vertical/vertical 250 mm grinding diameter: 250 mm work table:: 950x120 mm table movement: längs/longitudinal=500 kW table adjustment: 45° re/li ° dimensions of hydaulic: 0,6x0,5x0,9 mm Bjgrulty total ... more
11
used from plant disassembly Type: 0.5.48 025 034 441 No.: 8130506-3-3 12 tool stations Drum Ø approx. 400 mm 380 V / 50 Hz Space Lxwxh: CA. 440 x 500 x 400 mm Cjbz0dzu Price is plus VAT free loaded bearing casting Changes / errors in the specifications and subject to prior sale more
6
x-travel 290/300 mm y-travel 160 mm z-travel 330/340 mm engine output 1,5/1,9 kW weight of the machine ca. 0,7 t Optical condition: very good Mechanic: very good The machine can be viewed under current. Heidenhain digital readout, axes: 3 Aktiv vertical milling head Sk 40 Sk 40 operating instruction operating key 2102 2622 380 V, 50 Hz, with CEE plug and cable colour: green accessories: * 3-axis Heidenhain activ digital monitoring TNC 113 * angle table fix * angle table adjustabl... more
3
Angle drill, hand drill, corner drills -for working in hard to reach places 3qr2pzpb Screw diameter -Screws Ø, max.: 6 mm -Drill spindle thread: 12. 7 mm (1/2 ") -Voltage: 7.2 V Weight incl. battery, approx.: 1.20 kg -No load speed: 0-750 min-1 -Drilling diameter: -Drill Ø aluminum, Max: 10 mm -Drill Ø wood, Max: 15 mm -Drill Ø steel, Max: 10 mm Weight 4 kg more
1

4 Axis CNC Lathe with driven tools Okuma LU 15 MW

More Okuma Lu 15
Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1996
good (used)
Standard turning diameter 150 mm. Maximum swing 530 mm. Maximum spindle bore for bar work 52 mm. Itfydxd Spindle speed 45 – 4.500 Rpm. Number of tools on turret 12. Tool type VDI 40. CNC control OSP 7000 L. With 4 Axis, driven tools and sub spindle more
5
x-travel:700 mm y-travel:550 mm z-travel:500 mm feed speeds:1 - 2000 mm/min Table area:800 x 500 mm rapid traverse:5 m/min spindle turning speed range:25 - 3150 U/min spindle taper ISO:40 spindle diameter in front bearing:70 mm spindle motor:7 kW quill stroke:100 mm total power requirement:12 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:3,5 x 2,8 x 2,1 m Uwwj7xe3s HEIDENHAIN TNC 355 CNC control for 4 axis NC table [...] swivelling Heidenhain touch probe coolant device, mot... more
4
x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 total power requirement kW weight of the machine ca. 2,0 t dimensions 2,44 x 1,8 x 2,05 m 2vf9o8zsh Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - more


battery st...
daily

New machines via email!

Stay updated!

to

to

Edit search
BATTERY STRAPPING TOOL
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close