Used Bending for sale (3,269)

Condition: good (used), Technical specifications: Dedpowkaaljfx Al Seku Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), profile bending machine Djdpfswtph Dox Al Sjku

Condition: used, Machine type : Motorized bending roll Manufacturer : Bradbury Control unit : MCE (industrial electrical control panel) Supply voltage : 380 V Phase : 3 Frequency : 50 Hz FLA (Full Load Amperage) : 17.6 A Main motor FLA : 15 A Disconnect short-circuit rating : 200,000 A Internal short-circuit rating : 65,000 A Electrical diagram no. : ED3033 Electrical serial no. : B014541 Machine Application The Bradbury bending roll is used for rolling and forming sheet metal into precise cylinders, cones, or arcs. It is employed in the production of ducts, tanks, tubes, or metal shells, and can be integrated into profiling or cutting lines. Features / Differences – Dedicated MCE control panel, with high-capacity electrical protection (200,000 A). – Main motor rated at 15 A, operating on standard industrial 3-phase power. – Full electrical documentation under reference ED3033 for operation and maintenance. – Compatible for integration within Bradbury automated coil processing lines. Dkjdpfsw Dd Iysx Al Sou

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5090, Offer 22186 Technical data: - Bending capacity - Pipe at 45 kg/mm²: Ø 6 - 48 mm - Solid material up to approximately: 30 mm - Max. bending angle: 180° - Bending radius: 2 x D - Drive: 400 V / 1.5 kW - Space requirement: approx. W 4500 x H 1400 x D 1000 mm - Weight: approx. 600 kg Dodpfx Asztvgwsl Seku - with: - Digital bending angle display + fine adjustment of the bending angle - Mandrel bending device, 3.0 m, with hydraulic retraction - Bending tools: 20 R 60; 22 R 66; 25 R 75 mm - 25 R 50; 38 R 114 mm - Various bending mandrels, length: 3000 mm

Condition: new, Year of construction: 2026, actuation type: electric, number of rollers: 3, shaft diameter: 30 mm, - Shaft diameter 30 mm Dsdozmc T Djpfx Al Ssku - Can be operated in both clockwise and counterclockwise directions - Suitable for horizontal and vertical applications - Foot pedal control - Emergency stop switch - Documentation - 400V

Condition: as good as new (ex-display), Year of construction: 2026, machine/vehicle number: RoboCone RC9, functionality: fully functional, operating hours: 10 h, pressing force: 22 t, total height: 2,300 mm, working width: 900 mm, height adjustment type: electric, warranty duration: 36 months, working length: 900 mm, Bending cell RoboCone RC9 Dedjzlhf Nspfx Al Soku CoastOne - Made in Finland Complete bending cell with a Cone C9 electric press brake and a Yaskawa / Motoman GP25 (25kg) robot. Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics 36 months warranty after installation Delivery plus; available immediately Viewing under power possible at any time by appointment!

Condition: used, Year of construction: 2023, functionality: fully functional, total width: 870 mm, total length: 2,040 mm, frame height: 130 mm, frame width: 30 mm, Curve/Conveyor Curve/Rollers 70 degrees Vanderlande with drive Year of manufacture: 2023 Dkodpfszmqh Nsx Al Seu Manufacturer: Vanderlande Model/Type: Rollers, 70-degree curve Condition: used (like new) Overall outside length: approx. 2040 mm Overall inside length: approx. 1120 mm Overall width: approx. 870 mm Conveyor width/roller width: approx. 740 mm Roller spacing/axle spacing: approx. 100/50 mm Curve consists of 22 rollers Roller manufacturer: Interroll Frame made of steel Frame height: approx. 130 mm Frame width: approx. 30 mm Including SEW motor 0.75 kW Stock quantity: 12 pieces Price per piece The conveyor system was in operation until it was dismantled. Offers will only be provided upon presentation of a valid imprint; sales are only to business customers. Internal article number: 2026071904 Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic devices for loading and unloading your goods, we are your competent partner! We will gladly prepare an individual offer for you or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop ways to optimize your processes and material flow in a cost-effective and sustainable manner. We can also offer you fully automatic sorting technology or supplementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for rapid material transport Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Dsdpfxehgiuhe Al Soku Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc.

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: shared Djdpfxsb A Rumj Al Seku -Tool dimensions: 30 x 90 mm -Tool total length: 2500 mm -Rail length: 2500 mm -Weight: 95 kg

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 10 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 32 x 90 mm -Tool total length: 2430 mm -Transport dimensions: 820/90/H96 mm -Weight: 80 kg Dsdpjb A Rxqsfx Al Soku

Condition: used, Precision bending beam for glass cutting table, glass cutting table, glass cutting machine Dsdpfx Asb Nkt Esl Ssku -Manufacturer: INNOLAS S100-5N -Type: NJ Y123/101 -Weight: 0.1 kg

Condition: used, Bending tool, die, upper knife, upper tool, upper beam -Tool: for folding machine -Dimensions: 60 x 15 mm -Length: 1020 mm -Weight: 6 kg Dkodpfx Ascn Shrsl Ssu

Condition: used, Base for bending tool, bending tool, die, lower knife, lower tool, prism tool, turning prism, 1-piece die block for die bending machine, die tool, folding tool -Pad for bending tool:, 3 parts Dodpfori Unxjx Al Soku -Length: 3x 1050 mm -Dimensions: see drawing in the photos -Transport dimensions: 1050/80/H100 mm -Weight: 44 kg

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 4 pieces Dkodpfx Ajri Un Rjl Sju -Tool angle: 40° -Dimensions/lengths: see drawing in the photos -Transport dimensions: 1000/130/H70 mm -Total weight: 32.1 kg

Condition: used, Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Lower tool: for press brake Dksdpfsrdilxjx Al Sou -Total length: 3020 mm -Prism: 20 mm x 90° -Dimensions: see drawing in the photos -Total dimensions: 3020/65/H110 mm -Weight: 136 kg

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet for bending tools, dies, upper knives, upper tools, straight tools Dkjdpfxerd Acwj Al Sju -Tool cabinet. Drawer cabinet, sturdy design -2 drawers/3 shelves: layout/height see photos -lockable: with 1 key -Dimensions: WTH 640/930/H1215 mm -Weight: 177kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° / 3 mm flat Djdpferd Aczox Al Ssku -Dimensions: see drawing in the photos -Dimension: 80 x 119 mm -Total length: 835 mm / 1x 400/200/100/50/40/20/15/10 mm each -Total weight: approx. 22 kg

Condition: used, Base for bending tool, bending tool, die, lower knife, lower tool, prism tool Dkedord Ac Tepfx Al Sou -Manufacturer: Betschke Wegerhoff, lower tool: for press brake 4 pieces -Total length: 3320 mm / 3 x 835 mm 1 x 815 mm -Prisms: 12 mm x 37° / 8 mm x 35° -Dimensions: see drawing in the photos -Transport dimensions: 835/290/H65 mm -Weight: 77 kg

Condition: like new (used), Year of construction: 2022, Semi-automatic tube bending machine for tubes up to 30 mm with extended bending clearance, especially for meander bending Standard equipment: • Operation via Siemens Touch Panel KTP 600 • Function keys and plain text display for operator guidance • Program memory internally for 100 programs with 20 data sets each • Bending axis electronically controlled • Automatic bending angle adjustment • Target/actual value display for bending angle Dodszichaopfx Al Seku • Control panel swiveling • Bending head freestanding • Tube clamping hydraulically, clamping pressure adjustable • Guide block adjustment hydraulically • Bending mandrel extension hydraulically • Machine can be used in a mobile manner • Extended bending clearance for bending radii up to R max = 200 mm 1 TUBOBEND 30 with tube feed length 1,500 mm Technical data: Tube range up to: 30.0 x 3.0 mm (E 235 with Rm = 2xD) Bending radius up to: 200 mm Control: electronic Effective bending angle (max.): 180° (+10° overbending) Switch-off accuracy: ± 0.1° Bending speed (max.): 45°/s Dimensions L/W/H: 2200 / 600 / 1100 mm Weight: approx. 500 kg Power: 1.5 kW Connection data: 400 V / 50 Hz / 3 phases Mains fuse: CEE 16 A Color: RAL 5015 blue Optional equipment 1 piece. Length stop device, length 1500 mm 1 piece. Early mandrel retraction to optimize arc quality • For use with ball mandrels • Mandrel is automatically retracted during the bending process • Adjustment up to 10° continuously programmable 1 piece. Automatic mandrel lubrication as a minimum quantity lubrication system Pneumatic dosing device HP-Microspray (compressed air connection required) 1 piece. Safety foot switch for clamping and bending function 1 piece. Adjustable bending speed Note/Remark: The tube is approximately 500 mm round at the beginning and end of the bend (tube and tool = Ø 33.7 mm). The tube is only flattened into a flat oval tube in the spiral. The spiral only has one bend at each end. Bending of return bends is not possible. Since the tube is round, a pre-rotation can be performed to compensate for the slope. The position of the bend or the spiral must be determined using an external device.

Condition: good (used), Year of construction: 1988, Work piece thickness 0,4 - 8 mm Work piece height max. 51 mm Min. work piece width 50 mm min work piece length 180 mm edge magazine for PVC and strips pneumatic pressure rollers for edge magazine edge snipping unit cutting unit with 2 saws milling aggregate buffing unit Feed speed 11 m/ min Glue application with fin nozzle Air pressure 6 bar Dedpobahd Esfx Al Sjku length 3750 mm

Condition: like new (used), functionality: fully functional, Bending tools, new or like new, from a warehouse clearance sale: Upper tools: ASCL P4RFA P5R P5RFA P2RFA - H175 P7R/30° - H155 P3RFA with horn P3RFA divided - H250 P6RFA - H250 Dies: Dksdpswh R D Njfx Al Sou V16 - H55 Die V10C - H100 Details can be found in the list.

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Dkodpfx Aljyttv Rj Sou

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Dkedoxl Up Ujpfx Al Sou

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Dkodpfx Aljxcx Ats Seu

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Dsdperc Hiiofx Al Ssku