Used Bhx 050 for sale (1,199)

Condition: like new (used), Pfeiffer dbp 050 drypump Fgsdpfx Adjd Sz Avo Nja

Condition: new, table diameter 1500 mm table load 5,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 10000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,5 + 3,0 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. Fjdpefv Axfjfx Ad Njga • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: excellent (used), Year of construction: 2008, Machining center Manufacturer: Weeke Type: BHX 500 Year of manufacture: 2008 machining dimension X: 2.500 mm machining dimension Y: 1.300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 drilling spindles horizontal X: 16 drilling spindles horizontal Y: 4 grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Fedpfeh E Sghjx Ad Nsga Speed: 18.000 rpm Disassembled - directly available

Condition: used, Year of construction: 2015, functionality: fully functional, The heating/cooling unit from Carrier, type 30WG-050--0117-PE, is for sale; 2 units are in stock. Refrigerant: R410a Fgodpfx Ajxakvasd Nja Cooling capacity: 22 kW Connected load: 36 kW

Condition: excellent (used), Year of construction: 2007, operating hours: 23,983 h, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, spindle speed (max.): 7,500 rpm, TECHNICAL DETAILS Workpiece length: 200 – 2,500 mm Workpiece width: 70 – 1,000 mm Fsdpewi Inzsfx Ad Nega Workpiece thickness: 4 – 80 mm Power and Operation Operating power: 21 kW Software: WoodWop 4.5 Speeds Rapid traverse X-axis: 130 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Spindle Spindle speed: 1,500 – 7,500 rpm Compressed air and extraction Compressed air requirement: 7 bar Dust extraction: approx. 4,450 m³/h MACHINE DETAILS Dimensions (L x W x H): approx. 7,300 x 3,700 x 2,100 mm Weight: 5.5 t Operating hours: 23,983 h Workpiece counter: 102,199 pieces

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 0-250-11-2763, Used drilling center Optimat BHX 055 Built-in features: □ Horizontal drilling head with 4 spindles (X axis) □ Horizontal drilling head with 2 spindles (Y axis) □ Drilling head with 13 spindles □ Grooving saw D=100 mm (X direction) □ Pneumatic positioning stopper for workpiece alignment □ Workpiece clamping system Fodpfxsx Tz Sho Ad Nsga Units / Equipment: □ 10 kW milling motor with frequency inverter (HSK63) □ 4-position tool magazine □ WOODWOP 7 software Workpiece dimensions: □ Maximum: 3050 × 850 mm □ Minimum: 200 × 70 mm □ Material thickness: 12–60 mm General information: Year of manufacture: 2018 □ POWERCONTROL with POWERTOUCH system □ CE marking □ Condition: ready for operation / demonstration possible □ Availability: in stock Documentation: □ Language: Polish □ Documentation: paper + digital media

Condition: new, Year of construction: 2021, machine/vehicle number: 0-250-87-1000, functionality: fully functional, Equipment: CE marking, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Standard features •Drilling head with 13 spindles •Horizontal drilling head with 4 spindles in X-direction •Horizontal drilling head with 2 spindles in Y-direction •Grooving saw D=100 mm (X-direction) •Stop cylinder for workpiece positioning •Workpiece clamping system Fsdpew U Ty Ssfx Ad Nsga •Workpiece length: 3050 mm •Workpiece thickness: 12-60 mm Machine operation •WOODWOP 7 FOR MACHINE •Milling motor with frequency inverter 5kW (ETP) Documentation •Selected language: Polish, English, German •Documentation on data carrier, paper documentation General information •Year of manufacture: 2021 •Control: POWERCONTROL with POWERTOUCH system •CE-marked •Status: Ready for operation / can be demonstrated •Available in stock

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-250-12-2554, functionality: fully functional, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,000 mm, workpiece height (max.): 80 mm, controller model: PC 85, TECHNICAL DETAILS Workpiece width min.: 250 mm Workpiece width max.: 3,000 mm Workpiece length min.: 100 mm Workpiece length max.: 1,000 mm Workpiece height min.: 8 mm Workpiece height max.: 80 mm Upper vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) Lower vertical working unit ETP-6 vertical spindle power: 6 kW Grooving cutter diameter: 125 mm Vertical drilling spindles: 32 (power 2.7 kW) Horizontal drilling spindles: 10 (8 in X + 2 in Y) MACHINE DETAILS Control: PC 85 Software: woodWOP 6 EQUIPMENT Fedpsydnu Nsfx Ad Njga Safety enclosure for tool set 2 clamping chucks for securing and moving the workpiece during machining Loading bench with air cushion table Powered roller conveyor for panel discharge Capability for simultaneous processing of two panels

Condition: ready for operation (used), functionality: fully functional, controller model: POWER PC 85 + WOODWOP 6.0, working width: 850 mm, working height: 60 mm, working length: 3,050 mm, TECHNICAL DETAILS Working dimensions: 3,050 x 850 mm Working height: 12 - 60 mm Drilling Head Vertical spindles X-axis: 8 Vertical spindles Y-axis: 5 Horizontal spindles X-axis: 4 Horizontal spindles Y-axis: 2 Milling Head Axes: 3 Tool change: Automatic Diameter of integrated saw unit: 100 mm Fgjdpfjydmcrsx Ad Noa MACHINE DETAILS Control: POWER PC 85 + WOODWOP 6.0 (updated in 2023) EQUIPMENT 4-position tool changer

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Numerical Control PowerControl (Software woodWOP) Safety cabin (enclosure) of the working head Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machines with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) With pushing system to automatically infeed the workpiece Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 2500 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Fgjdpslkdpmefx Ad Nea WORKING GROUPS (TOP): 2V32, 2H8X/Y2, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y) WORKING GROUPS (BOTTOM) No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 23 Vertical drilling spindles (power Kw 2.3) No. 5 Horizontal drilling spindles (4 in X + 1 in y)

Year of construction: 2018, condition: good (used), water pump KSB ETB 050-032-200 26 m³/h 55m 11 KW price: 2.750 Euro Fjdpfx Asi E Icied Nsga contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 50 t, stroke length: 105 mm, total width: 2,000 mm, overall weight: 4,300 kg, working width: 2,000 mm, distance between stands: 1,600 mm, Promecam ITP2-050-20 Converted to Delem DA 65R control system in 2019 15" touch screen with graphics Bending length 2000 mm stand passage 1600 mm Bending pressure 50 T CNC back gauge X-R-Z1+Z2 axis Connected load 7.5kw Stroke 105mm Intermediate pieces Int100 Front support tables Fgjdpfx Adju Dm Ius Nea Amada tool system incl. many tools

Condition: good (used), Year of construction: 1990, Battenfeld 300/050 CD Battenfeld 200/050 CD Year 1991 ,1992 Closing 30 TO Closing 20 TO Fgedpfx Adefubkme Nsa Scrow 22 mm Injection weight 30,4 Distance between tie bars 25.4x25.4 Available 2x injection molding machines Battenfeld

Condition: used, YT77-1Z-050, STP-iXA3305C, Edwards Turbomolecular Pump - Refurbished Model: YT77-1Z-050 Type: STP-iXA3305C Condition: Refurbished Fgedoityuwepfx Ad Nsa

Condition: new, neu ca. 4 Wochen ab Auftragse Fgedpfswirxkox Ad Nea Italien 10900 € 209.28 € 60 mm 595 mm 363 mm 900 mm 130 kg 10.5 cm³ 60 x 3 mm 2"Gas x 3,91 mm 60 x 4 mm 60 x 2 mm 60 x 4 mm 60 x 4 mm 64 x 4 mm 64 x 4 mm 60 x 4 mm 50 x 4 mm 35 mm 60x30x4 stehend, 60x40x5 mm 300 mm 10 mm 10 mm 1,25 / 2,50 U/min 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 15,971 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,400 mm, drive type: Elektro, Sideloader ISO class: ISO class 3 = 2,500 - 4,999 kg Fjdpfx Ast S I Haed Nega Mast type: Standard Technical condition: good Heating, full cab,

Condition: used, machine/vehicle number: 007400, Max. panel width: 800 mm Max. panel length: 1250 mm Fsdpfx Aet Hmt Ied Nega No of injectors: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4 Fgedpfjx A Td Ejx Ad Nea

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm Fgjdpfxsyr Utne Ad Nea _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm Fedoyycwrjpfx Ad Nega tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 6.000 min/-1 weight 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 Fedpsyycwlsfx Ad Njga DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm

Condition: excellent (used), CATALOG NUMBER 7611 Fjdpfxeyz Sgfe Ad Noga Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 Fodpfx Adjy Aam No Nega 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos sold exactly as pictured

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Fgjdpsyywl Rsfx Ad Nea Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: good (used), Robopac Pack 6050A Shrink Tunnel with Sealer Semi-automatic shrink wrapping machine. Made in Italy. Year of manufacture: 2019. The machine is in very good condition, ready for production. Used in virtually every industry: printing, cosmetics, confectionery – wherever you want to elegantly package your goods. Semi-automatic operation: simply insert the product into the packaging and the machine does the rest. Machine parameters are set from the control panel. Sealing dimensions: 600x500mm Maximum height: 240mm Weight: 450kg Fgedpfxeyy Rkae Ad Noa Power supply: 380V Installed power: 7.4kW Capacity: approx. 900 pcs/h Includes take-up rollers.