Used Bolster for sale (510)

Condition: new, table length 1200 mm table width 800 mm weight 153 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Ibodpfxjxabbaj Ag Nec Working height between approx. 700 and 1,000 mm including 16 hole plate: - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 16 mm - Holes surface 50x50 mm grid - Material thickness 12 mm

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,595 kg, total height: 800 mm, total length: 1,500 mm, total width: 1,500 mm, plate height: 800 mm, plate width: 1,500 mm, groove spacing: 140 mm, Clamping cube - T-slot plates 1500 x 1500 x 800 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Parameters can be combined as desired. Clamping plate : 1500 x 1500 x 800 mm T-slots - width: 38mm x 22mm T-slot spacing: 140mm Edge distance: 40mm Number of grooves: 14 Casting quality: HT250 Flatness less than 0,12 mm Ibsdpfx Asxbpnqeg Noc Surface machined according to DIN 876/III

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,700 kg, axle configuration: > 3 axles, total width: 2,550 mm, total height: 1,460 mm, Equipment: ABS, The concept of the self-steering trailer series is specifically designed for the transport of particularly long and heavy loads. DOLL self-steering trailers are robust, track accurately, and are easy to handle—ideal for transporting steel or concrete beams, as well as for bridge sections or wind turbine components. Depending on the desired payload, DOLL offers three-, four-, and five-axle self-steering trailers, with matching trailers available in combination with two- or three-axle dollies. Additional steering can be operated via radio remote control. * Hydraulic steering, 55° steering angle * Adjustable steering radii for both short and long bolster positions * Maximum payload capacity, depending on vehicle combination, up to 85 t * Comprehensive load securing equipment included Iedsxlw Tpepfx Ag Njbc * Tare weight starting from 7,300 kg (+/- 2%) * Available for delivery within a few days * 2-AXLE DOLLY ALSO AVAILABLE AT SHORT NOTICE Images may differ from the original. All information provided without guarantee. Contact: Julian Halter Phone: —

Condition: used, Granite measuring table, grid table, surface plate on a steel frame. Tabletop dimensions: 100 cm x 200 cm x 25 cm The top is equipped with M8 threaded holes. One side of the top has a recess: 31 cm x 24 cm, depth 2 cm. Working height approximately 85 cm. Weight: approx. 1,400 kg All staff speak Dutch, German, and English. Iedpfxexdi S Ij Ag Nobc Prices are excluding VAT. Shipping is possible (at additional cost). (Changes and errors in technical data, information, and prices as well as prior sale reserved.)

Condition: excellent (used), functionality: fully functional, Hello, We offer used and new pallets for workpiece clamping from Erowa or compatible manufacturers. These are prepared to accommodate clamps with a 52mm pitch. We can also easily adapt clamps with a 96mm pitch. Clamping spigots included. Individual acceptance is possible. Spare parts are available. Iodpfx Aowa Ihiog Njbc The clamps are not for sale. The used clamping devices have been cleaned and tested by us. A functional test was also performed. The clamping devices show slight signs of wear. Do you have any questions? We would be happy to help.

Condition: used, Clamping plate, machine table with T-slots made of steel Clamping table Clamping plate, clamping table, machine table HOMEMADE can also be used as a straightening plate or welding table Table surface: 2150 x 1040 mm Construction height: 200 mm Ijdjtqgnyepfx Ag Nebc - Top and bottom sides machined in parallel, surfaces planed - Table plate L x W x H = 2150 x 1040 x 65 mm - Table plate provided with several symmetrical bores Table plate with M16 and M24 threaded holes, M16, M24, M16, M24, etc. Bore spacing lengthwise: approx. 250 mm Bore spacing crosswise: approx. 255 / 165 / 255 mm - 6 pieces double T-beams welded onto the steel plate Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Clearance between double T-beams: 50 to 55 mm Weight: 1730 kg Good condition

Condition: new, table length 1200 mm table width 800 mm weight 177 kg With the new mobile lifting table from Siegmund you can get there quickly and easily to the ideal working height. Set new standards in ergonomics as well Flexibility and benefit from the wide range of possible uses. The stable steel construction offers stability even during the Adjustment of the working height. Maximum load capacity including perforated plate 500 kg Working height between approx. 700 and 1,000 mm For clamping on Premium Light with a clamping bolt if the spacer ring article no. 280653.N required. including 28 mm perforated plate (light): - Premium Light Iodpfx Aoxaayuog Nsbc - through hardened tool steel X8.7, - plasma nitrided and BAR coated - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Material thickness 15 mm

Condition: new, Year of construction: 2025, overall weight: 4,200 kg, total height: 600 mm, total length: 3,000 mm, total width: 1,000 mm, Clamping cube - T-slot plates 3000 x 1000 x 600 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Parameters can be combined as desired. Ibodpfxotrlahj Ag Noc T-slots - width: T-slot spacing: Edge distance: Number of grooves: 10 Casting quality: HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III

Condition: good (used), T-slot clamping plate for a radial drilling machine Dimensions L x W x H: 2500 x 1130 x 260 mm T-slot width: 20 mm Number of T-slots: 3 T-slots not continuous across the entire length Ijdpfxev N Et No Ag Nobc Weight: approx. 2 t Siegfried Volz Machine Tools Rüschebrinkstr. 151 - 153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1980, length 3500 mm width 1750 mm Ibodpfxsw U Eile Ag Njc thickness of bolster 260 mm number 2 St no. of flutes 6 weight 5 t 2 pieces T slotted floor plates with 6 slots, each 36 mm width. All dimensions and price is only for one plate !

Condition: ready for operation (used), Hello, we offer used Erowa Powerchuck with pallets. They have been cleaned and checked by us. In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Iodjiq Iy Ijpfx Ag Nebc Individual purchase also possible. Wide range of pallets available. Do you have any questions? Then we are at your disposal. Shipping is possible.

Condition: good (used), Marking-out and straightening plates in various sizes and designs, with or without slots, with subframe or legs Isdpfxsxcf Eus Ag Nsbc

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1518 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm Ibodpfxow U U N Uj Ag Nsc - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, Year of construction: 2025, overall weight: 1,800 kg, total height: 600 mm, total length: 2,000 mm, total width: 1,000 mm, plate height: 600 mm, groove spacing: 140 mm, GERD WOLFF Clamping cube 2000 x 1000 x 600 mm If you cannot find the size you require, simply send us an email with the completed PDF form. This will enable us to offer you a customised plate tailored to your requirements. Ibodpexbpihefx Ag Noc T-slots – size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 1800 kg Cast iron quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Clamping cube, cubic clamping table, multi-sided clamping, angle clamping cube, precision cube, CNC clamping cube, clamping angle, machine cube, 90-degree clamping device, drill hole cube, modular clamping cubes, workpiece positioning, assembly cube, fixing cube, clamping block

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Clamping plate: surface plate with adjustable feet Ibedswucvdjpfx Ag Nsc -Length: 3500 mm -Width: 1750 mm -Plate thickness: 50 mm -Plate: with support ribs -Dimensions: 3500/1750/H815 mm -Weight: 4750 kg

Condition: new, Year of construction: 2021, functionality: fully functional, For sale: Metal Stamping Press JINAOLAN ALP-25V (25T, 2021) Condition: Brand new, never used, original packaging. We use several of these presses in our factory—photos show those units. Two brand new units available. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25V Year of Manufacture: 2021 Modern CNC-controlled eccentric press designed for forming, stamping, and punching various metal components. The press is equipped with a high-level operator safety system (Laser Safe), ensuring maximum operational safety. Ibjdpfoxniw Sjx Ag Njc Technical Specifications: - Rated Capacity: 25 tons - Stroke Rate: 60–140 strokes/min (SPM) - Stroke Length: 60 mm - Max Die Height: 200 mm - Die Height Adjustment: 50 mm - Slide Area: 470 × 245 mm - Bolster Area: 680 × 300 mm - Main Motor: 2.2 × 4 kW - Max Air Pressure: 0.51 MPa - Max Tool Weight: 0.30 t - Control: CNC (programmable control unit) - Safety System: Laser Safe – two-hand control system Application: This press is suitable for stamping, punching, bending, and forming metal parts. Thanks to CNC control and precision mechanics, the machine ensures high productivity, repeatability, and safety. Ideal for small and medium-sized manufacturing, metal component, and forming part production. Advantages: - Completely new, factory-sealed equipment - CNC control: precise and user-friendly programming - Laser Safe system: press can be lowered only when both hand controls are activated (two-hand safety) - Reduces risk of injury, complies with stringent safety standards - Robust construction and stable eccentric drive - 2 brand new presses in stock + several used units in operation If you have further questions, we are happy to answer them.

Condition: used, total surface approx. 33,54 m² 6 plates 2,000 x 1,290 mm width of T-slots 30 mm thickness of the plates 95 mm weight approx. 1,700 kg per plate - price per plate - Ijdpfx Asc S R H Nsg Njbc

Condition: used, Width: 1545 mm Length: 3055 mm Ijdpfx Ajdfkllsg Nobc Height: 265 mm 4 T-slots lengthwise with slot width: 28 mm for T-slots: M 24 1 groove sideways with groove: 20 x 15 mm weight: approx. 3,5 t

Condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 17268, Technical data: -Get well plate surface Iedpfxsdd Dmxe Ag Njbc -Length 2000 mm -Approx. 1000 mm wide -Height approx. 1600 mm -Top plate thickness approx. 95 mm -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 X 1200 x H 1600 mm - weight approx. 4980 kg

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Iedpfoxm U S Sox Ag Nebc Country of origin: China Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Condition: used, plate size: 500 x 1000 mm Iodeb T R Dujpfx Ag Nsbc plate thickness incl. ribbing: 80 mm plate thickness of upper plate: 30 mm weight: ca. 170 kg

Condition: good (used), machine/vehicle number: 18287 + 88, Technical data: -Get well plate surface -Length approx. 2000 mm Ibodjd Aakrspfx Ag Njc -Width approx. 600 mm -Height approx. 270 mm -Plate thickness 20 mm -div. bores partially with thread -Gutters between top plate and base - weight jeweills approx. 100 kg

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: Metal Stamping Press ALP-25C (25T, 2020) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25C Year of manufacture: 2020-11 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 45 mm Stroke rate: 145 strokes/min (SPM) Max. die height: 180 mm Height adjustment: 35 mm Ram working area: 170 × 150 mm Bolster area: 370 × 240 mm Country of origin: China Applications: The ALP-25C press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in tool, metal structure, and automotive parts manufacturing; working with thin and medium-gauge sheet metal. Ibodpfxexmwnij Ag Njc If you have any further questions, please feel free to contact us.

Condition: good (used), plate size: 3000 x 1500 mm plate thickness incl. ribbing: 300 mm Ibodpodm Dw Defx Ag Nec weight: 3000 kg

Condition: used, plate size: 800 x 2000 mm Ibsdpfx Ageb T R Dys Nsc plate thickness incl. ribbing: 80 mm plate thickness of upper plate: 30 mm weight: ca. 400 kg