Used Boring Machine for sale (65,002)

Condition: used, WEBSTER & BENNETT DOUBLE COLUMN VERTICAL BORING MACHINE Model 120” ‘DCM’ Serial number 5914-1 Year 1970 Diameter of faceplate 108” 2743 mm Diameter of work turned with ram 120” 3048 mm Max. diameter turned for full travel of turret slide114” 2895 mm Diameter of work admitted 122” 3100 mm Height from faceplate to underside of cross-slide78” max. 1981 mm 24” min. 609 mm Bljdpfx Asyyzxusaaef Vertical travel of ram 48” 1219 mm Vertical travel of turret slide 38” 965 mm Horizontal travel of ram or turret slide (Table centre outwards) 66” 1676 mm Minimum distance between centre of ram and turret slide (dependent on tooling) 30” 762 mm Centre to face of cross slide 17” 432 mm Smallest dia. hole toolholder and ram will enter 11 ¾” 298 mm Smallest dia. hole turret slide will enter 28” 711 mm Maximum load on table 44800 lb 20320 kg Number of feeds 12 Range of feeds .0025 - .125 ins/rev. Number of speeds 12 Range of speeds 2 - 53 rpm Main motor 50 HP Width 222” 5639 mm Front to back 186” 4725 mm Height 215” 5461 mm Approximate total weight of machine 100800 lb 45720 kg

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Bedpox T Ddyofx Aaaelf Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Bjdpeu Dahnofx Aaaslf Weight - 40329 KGS

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Bjdpfx Aaeygk Droajlf Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: excellent (used), drilling depth: 10,000 mm, MGA (Romanian) Deep Hole Boring Machine Max Boring Dia: 187mm Max Boring Length: 10,000mm Bledoyk Tcfopfx Aaaof Chuck Diameter: 813mm Chuck Bore: 152mm Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Controls: Bosh Rexroth Electric Drives Software Winstudio At the moment the machine is set to bore 3000mm length Has 5 other bed sections to increase this 12 Various Boring Tubes 30 Various Boring Heads 5 Supporting Steadies 2 Pressure Heads

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Bedpoyycc Uofx Aaaolf Built 1986 Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head Blsdpfx Aasyxr Hmsaef

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Blsdpfx Aaexwzg Reasf Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Blsdpfoyy I Snjx Aaaef

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Blsdpfowhuh Sox Aaajf Availability: by arrangement Location: Solingen

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Bodpfxsyvv Nge Aaaslf Lever operation 2 manual clamps Includes several slot mortising cutters Location: ex stock 54634 Bitburg - immediately available -

Year of construction: 1981, condition: used, machine/vehicle number: 3328781, Stop adjustment in x-axis up to approx.: 1150 mm Stop adjustment in y-axis up to: 150 mm for material thickness theoretically up to: 190 mm electrical connection: 380 V space requirement: 2050 x 850 x 1200 mm Weight: 138 kg Bjdpfx Aasbnpcwjaslf

Year of construction: 1985, condition: used, machine/vehicle number: 16085001, Table size: 480 x 1200 mm Procedures x 650 mm y: 420 mm w: 210 mm w (drill head height adjustment): 540 mm smallest/largest distance between table and spindle nose: 0/720 mm Throat depth: 450 mm Spindle retainer: System SF 32 Infinitely variable spindle speeds: 25-5600 RPM Spindle drive: 380 V, 6 kVA Approximate weight: 3 tons Space: 2000 x 2200 x 2300 mm Bedjb H D Idopfx Aaaslf

Condition: good (used), Slot Mortising Machine L2 - Year of manufacture: 1977 - Weight approx. 220 kg - Overall dimensions approx. 1,120 x 880 x 1,120 mm (W x D x H) - Table height approx. 980 mm - Table size approx. 820 x 350 mm - Power consumption 3.2 A / 3-phase power connection - Drilling depth approx. 150 mm - Drilling length approx. 200 mm - Max. drilling height approx. 120 mm Blsdpjywnuwofx Aaasf - Drill chuck approx. 3–20 mm

Condition: good (used), Year of construction: 1999, Slot mortising machine CM104 Bsdpfjywnqlsx Aaaolf - Year of manufacture: 1999 - 400 Volt - with dowel boring unit featuring locating pin and remote control - robust construction - single-lever operation - 2-jaw Westcott drill chuck - extraction unit

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control Blodpeu Idp Dsfx Aaasf *

Condition: new, Year of construction: 2024, Hoku Houfek long hole drilling machine LLB VD 20 R Top condition - Top machine - Bledpfsu Agzxjx Aaajf Motor 1,5/1,9 kW, Transverse displacement in Y-axis 250 mm, Longitudinal displacement X 340 mm, Vertical displacement z-axis 200 mm, 2 speeds 1,440 and 2,880 rpm. One-hand dowel drilling device with pitch 16 - 22 - 25 - 32 mm, 2 manual eccentric clamps, manual digital display for drill bit height, Table dimensions 700 x 400 mm, Drill chuck max. D = 20 mm, table rotatable +/- 45°, weight approx. 345 kg immediately ex stock 54634 Bitburg Subject to prior sale,

Condition: like new (used), Year of construction: 1997, functionality: fully functional, Dowel and slot mortising machine HOFFMANN HT 200 Very good condition; the machine comes from an educational facility, has seen little use, and is essentially as-new with only minimal signs of wear. Used for milling slots and drilling dowel holes. The drilling height can be read very precisely on a digital counter. Includes 3 tool holders: for bits with M10 external thread, and for bits with 12 mm and 16 mm shank, plus a 2-jaw drill chuck for bits from 3–20 mm. Features workpiece support tables on the left and right, both swiveling and equipped with a support roller. The machine is fitted with a transport chassis. Equipped with 2 angle stops on the machine table for left and right positioning. The clamping arms are repositionable and adjustable. Includes a locating device for balustrade rails, adjustable from 80–160 mm and equipped with a digital counter and locating mushroom. 380V electrical connection, 1400 and 1800W via two speed ranges. 1350 and 2770 RPM. Year of manufacture: 1997 Weight: approx. 280 kg With this machine, you can mill slots for e.g. lock cases and similar items, or produce all types of frame dowel joints both at right angles, butted, and mitre joints. Ideally suited for the production of dowel joints in timber frame construction, as well as furniture, door, window, and staircase manufacturing, and similar applications. Blsdpfxeyy Rtzs Aaaof The drilling unit is tiltable to 65° on both sides and has a detent at 0°, making it ideal for boring baluster holes in stair stringers. Thanks to the two-speed ranges, even large-diameter bits can be used without risk of burning during drilling. The precise stops and detents, combined with the design of the machine, enable extremely fast production of dowel joints, making the machine highly efficient. The machine requires a 6 bar compressed air connection (air consumption is very low). Right-hand rotation. Performs milling and drilling operations very well and cleanly. Workpiece clamping is achieved using two pneumatic clamping cylinders operated by foot pedal. A linear laser mounted on top of the machine allows for quick and accurate positioning and drilling of marked dowel holes and angled holes. Supplied with a precision 12 mm indexing rail, featuring a central detent and 13 stops on each side. Two adjustable stops on left and right to set the working width for slot mortising. Maximum working width: 330 mm Maximum drill hole height: 90 mm Maximum drilling depth: 200 mm (with depth stop) Maximum workpiece height: 150 mm All functions operate perfectly. Includes manual/documentation. We personally deliver and demonstrate the machine anywhere in Germany for €220, giving you a zero-risk purchase. Delivery to Austria and other countries possible on request. The machine table is 1100 mm wide and 250 mm deep. Professional-grade equipment—no DIY-store junk. Ready for immediate operation. Very robust and durable construction. Precision linear guides with play-free ball bearing sleeves are in flawless order and run smoothly; the tilting mechanism operates very smoothly thanks to a ball bearing, and locking is possible via a clamping screw.

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Bledjqa Txqspfx Aaaof Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel drilling machine with 3 CNC axes (+/- 0.1 mm) with horizontal and vertical drilling capability electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen with memory for up to 1000 programs with parallel fences with numerical adjustment with 21 drilling spindles (10 left, 11 right) Spindle spacing: 32 mm Maximum drilling distance: 640 mm Maximum tool diameter: 40 mm Maximum drilling depth: 65 mm Maximum horizontal drilling height: 35 mm Working height: 860 mm Maximum panel thickness: 60 mm Bjdpfx Ajlk R Epsaaslf Maximum panel size: 900 x 3000 mm Motor: 1.5 kW - 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction port: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and end-face - Swivel: 0–90 degrees via handwheel Bjdpexwz Ihofx Aaaslf - Pneumatic material clamps: 3 pcs - Passage: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction connection diameter: 120 mm - Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Storage location: Hesse

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical specifications: - With line drilling head with 7 spindles and locating pins - Spindle pitch: 32 mm - With drilling head for BLUM hinges - With drilling head for Hettich hinges - With the respective pressing dies - Motor: 400 V, 0.75 kW, 2800 rpm - With stop bars Bledeyncppspfx Aaaef Availability: short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m Bedpfsw Nmw Hox Aaajlf - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement.

Condition: used, spindle diameter 90 mm x-travel 1250 mm y-travel 1120 mm z-travel 1400 mm w-axis 710 mm spindle turning speed range 28 - 1400(x18) U/min tool adaptor MT 5 Table dimensions 1000 x 1120 mm Facing head, 3 axis digital read out, spindle support and tailstock. Bodpfxsyuqg Ns Aaajlf

Condition: used, spindle diameter 125 mm spindle travel 1000 mm column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. total power requirement 25 kW Bjdpfx Aeyuql Eoaaelf