Used Boring Machine for sale (91,464)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Hnodpfx Ajuddimsg Nou Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and Technical Data: - Drilling depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid traverse system; manual cranking is eliminated - Smooth and steplessly adjustable drilling unit - Height adjustment with fine setting and gas spring for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drilling depth adjustable via scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large-dimension cast iron table with ground surface Motor power: 1.5 / 1.9 kW (2.0 / 2.6 HP) Voltage: 400 V Speed: 1,400 / 2,850 rpm Westcott drill chuck: 0–20 mm Maximum drilling depth: 220 mm Hnsdpfx Aexllwcog Nou Drilling width: 340 mm Height adjustment: 145 mm Drill head swiveling: -60° to +60° Drill table size: 595 × 315 mm Table extension: 2 × 200 × 220 mm Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm (W × D × H) Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Tiltable drilling unit 45°-90°-45° - Extraction connection 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit tiltable to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre stop - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Storage location: Nattheim Hnedpfx Agoxcmv Ue Nsu

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table Hnodpfx Aopqx H Tog Nsu diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Hsdpfxow U Uhke Ag Nonu Tooling, Counter Rotation

Condition: good (used), functionality: fully functional, Row drilling machine SCHEER, 21 spindles, non-swiveling Hodpfx Agexlt R Re Nsnu

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG Hnodpfxsq Dlzns Ag Nju

Condition: good (used), Year of construction: 2004, Ref. -No.: 10520 Manufacturer: TOS VARNSDORF Type: WHNQ 13 CNC Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN TNC 430 Storage location: Halberstadt Country of origin: Czech Republic Machine-No.: 23XX X-Travel: 3500 mm Y-Travel: 2500 mm Z-Travel: 1250 mm W-Axis: 800 mm Table Load: 12.500 kg Clamping Area: 1800 x 2500 mm Tool Taper: SK 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 3.000 RPM Max. Torque: 3323 Nm Rapid Travel X/Y/Z: 10000 mm / min Drive Capacity - Spindle Motor: 37 / 1500 kW Weight Of The Machine Ca.: 40 t Further information: - Tools + accessories - Angle head - Angle up to 2.5m - Chip conveyor - 3D measuring probe - Clamping device Machine is still in production and can be inspected under power by arrangement. Hjdpfx Ajw Nmw Hjg Nonu

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Swiveling drilling unit 45°-90°-45° - Extraction port 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit swivels to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre fence - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Hjdpfx Asxcmv Ijg Njnu Storage location: Nattheim

Condition: excellent (used), machine/vehicle number: 5210529, Fully tooled up with loads of accessories and internal housing dial guage. Hedpfov Abitjx Ag Nsnu

Condition: used, Year of construction: 1979, functionality: fully functional, feed length X-axis: 850 mm, feed length Y-axis: 280 mm, feed length Z-axis: 355 mm, overall weight: 6,100 kg, For sale is a Fritz Heckert FW 315 X1/2 milling machine from 1979. The machine is fully operational and is being sold based on offers. Please submit your serious offer. Scrap prices or offers only slightly above scrap value will not be considered. Technical specifications: Year of manufacture: 1979 Rated voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Machine connected load: 8 kW Machine rated current: 19 A Incoming line fuse: 50 A X travel: 850 mm Y travel: 280 mm Z travel: 355 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Speed range: 28 - 1400 rpm Table clamping surface: 1070 x 270 mm Total weight: approx. 6.1 t (tons) Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are exclusive of VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Hodpowv T I Tsfx Ag Njnu For further information or contact options, please visit our website.

Condition: good (used), HETTICH hinge drilling machine with base cabinet Hjdpfxsxlt Hxj Ag Nonu

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 405 986, feed length X-axis: 1,250 mm, feed length Z-axis: 45 mm, drilling depth: 35 mm, total width: 1,300 mm, total length: 2,300 mm, total height: 1,600 mm, overall weight: 1,600 kg, feed rate Y-axis: 20 m/min, feed rate Z-axis: 10 m/min, number of spindles: 2, stroke length: 40 mm, working height: 900 mm, NC controlled multi-spindle drilling, gluing and dowel inserting machine Gannomat Type 471 EB, GIC glue monitoring, programs individually programmable, horizontal drilling height from 5 - 40 mm, insertion overhang freely selectable, dowels 8 mm, length 25 - 50 mm. Settings: drilling only, row hole drilling, drill & glue, drill glue insert. Automatic cleaning with water flushing. Can be inspected directly at our premises. Hjdpfowqfd Aex Ag Njnu

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Hnodpfsw Iu Nhox Ag Nju Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: used, Price: On request Hjdowfpbbjpfx Ag Njnu - Documentation available: No - Control: Conventional - Drilling depth: 150mm - Model: ördinatenboor - Digital readout: Yes - Table width: 1500mm - Table length: 2200mm - Travel X: 2500mm - Travel Y: 1400mm - Spindle diameter: 100mm - Travel Z: 1000mm - Number of axes: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2014, functionality: fully functional, ✅ Brand: FERMAT ✅ Type: CNC Boring Machine ✅ Model: WFT 13 R CNC ✅ X Travel: 2000 mm ✅ Y Travel: 2000 mm Hnsdjwl Er Nepfx Ag Neu ✅ Year: 2014

Condition: used, Year of construction: 1984, Row and fitting boring machine, used machine, year of manufacture: 1984, condition: function-tested. Technical data: fully automatic pneumatic control with foot valve, boring unit 1.1 kW, speed 2800 rpm, boring stroke 0 – 55 mm, cross adjustable stop ruler 0 – 140 mm, working height 850 mm, required space without extension rail 1000 x 750 mm, compressed air connection 6 bar, weight approx. 70 kg. Includes various stops, boring heads, and drill bits. Location: Röllbach. Availability: Immediately. Hnjdpsxdpkdofx Ag Nou

Condition: excellent (used), functionality: fully functional, JUNGENTHAL KE-1200 Hnedpfjxlafzsx Ag Nou VERTICAL BORING MILL MAX. SWING: 1300 MM MAX. HEIGHT: 1000 MM COMES WITH ELEVATING RAIL AND SIDE RAM

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length 4250 mm Table width 4250 mm Table load Hnodpfx Astwllfog Nju 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Hnedpow Upfdjfx Ag Nsu Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: used, functionality: fully functional, Year of construction: 2007, Tracto Technik Horizontal drilling carriage on rubber track chassis Year of manufacture: 2007 Drive motor for travel and drilling operation: 55 kW 2 support and push shields Engageable percussion system Semi-automatic rod lubrication device Hydraulic drill rod changing system Hydraulic clamping and release device Drilling automation incl. power stage regulation 2 x thread adapters Hodpfexn T R Njx Ag Nenu 126 m percussive drill rods Drill lance with steering head

Condition: good (used), Code: 0030 Brand: MARZANI Model: RE/2 Hjdpfx Asvyy Uijg Njnu Automatic slot-cutting machine for window shutters Technical data Spindle coupling mm 10 Bit rotation 10000 rpm Two uprights can be processed simultaneously Several cutting intervals executable Main motor Hp 2 Working unit inclination Bits lowering adjustment Feed adjustment Slot skipping Compressed air 6-7 bar Overall dimensions mm 1450 x 950 x 1400 h Weight kg 440

Condition: excellent (used), Dowel boring machine DB 2000 Hodpoth U Ezofx Ag Nonu Year of construction 1981

Condition: used, Year of construction: 2000, Table size: 580 x 280 mm Drilling table height: 800 mm Drilling depth: 150 mm Drilling length: 225 mm Height adjustment: 180 mm Swivel range: 2x 45° Drill speed: 2800 rpm Wescute drill chuck: 0-20 mm Extraction port diameter: 80 mm Motor power: 2.2 kW / 3 HP Space required: 850 x 1000 x 1050 mm Weight: approx. 240 kg Storage location: Supplier Hnodpfx Aow Sy Hysg Nsu

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: Hnjdpfx Agsif Az Ue Nsu X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)