Used Claas Wm 20 for sale (48)

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Iodpfx Agoxf U N Uo Njbc Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar 7 disc modules with 2 blades each incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146

Condition: new, Year of construction: 2023, 3rd control circuit | Multi-coupler | Claas front loader FL 120 hydraulic parallel guidance EURO tool carrier mechanical implement locking 3rd hydraulic function FITLOCK Ibsdpfx Aexfw Tvsg Njc MACH quick coupling system | Internal no.: 11114767

Condition: new, Year of construction: 2024, working width: 3,000 mm, Mower Bar: Disc | Claas Disco 3200 C Contour New machine Year of manufacture: 2024 - Disc mower for 3-point linkage, Category III - Central suspension - Working width: 3.00 m - Main frame with optimized center of gravity due to rearward-angled boom - Folding angle in transport position: 120° - Low-speed concept with reduced PTO speed to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines MAX CUT Cutter Bar: Isdpjw Ul Uzofx Ag Njbc - 7 mowing discs with integrated SAFETY LINK safety module - Portal-style cutter bar with dual-sided suspension - Permanently lubricated cutter bar with precision-ground gears (20 mm) - Bolted and torsion-resistant cutter bar construction - One-piece, wave-shaped tray for tunnel effect - Forward-mounted mowing discs with HD wear protection - MAX CUT components made of hardened forged steel - Knife holders with tungsten carbide coating - Quick-change blades Cutter bar suspension: - ACTIVE FLOAT system, hydropneumatic suspension | Internal no.: 11180933

Condition: new, Year of construction: 2021, front tire size: 420/65 R30 MITAS, rear tire size: 540/65 R30 MITAS, Complete wheel set consisting of: 2x 540/65 R30 Mitas with 100% Ibsdpfx Agsvvppbo Njc 2x 420/65 R20 Mitas with 100% adjustable rims the tires have been driven on the road for approx. 50 km | Internal number: 11078496

Condition: used, Year of construction: 2021, operating hours: 8,170 h, Equipment: crop cutter, PickUp-hydr. | Roller press | Claas Rollant 520 RC Year of manufacture 2021 8200 pressed bales Equipment: Pickup with roller press, pickup width 2.10 m Follower wheels for pickup, oscillating (pivot point Ø 30 mm) Ibsdpfev Aqthsx Ag Noc ROTO REVERSE ROTO CUT cutting rotor Set of knives Bale ejector, straight Single wide-angle universal joint shaft with cam clutch, 6-part Tires 19.0/45-17 Input gear 540 rpm OPERATOR, operating terminal with display | Internal no.: 11031991

Condition: used, Year of construction: 1996, Binding type: twine binding | used Rollant 46 Twine binding Ijdpfx Agsxpk T De Nsbc hydraulic pick-up ready-to-use condition

Condition: used, operating hours: 1,920 h, power: 55 kW (74.78 HP), gearing type: mechanical, fuel type: diesel, first registration: 02/2021, next inspection (TÜV): 05/2026, color: green, overall weight: 5,100 kg, mileage: 1,920 km, suspension: other, number of seats: 1, Equipment: air conditioning, cabin, trailer coupling, Radio, center armrest, diesel, first registered on 03.02.2021, 1,920 operating hours, 55 kW, 3,387 cm³, cab, 1 seat, air conditioning, heating, armrest, radio, front and rear headlights, front and rear windows opening, Stoll ProfiLine FZ10 front loader, permissible total weight 5,100 kg. FOR US, CONDITION AND PERSONAL IMPRESSION ARE DECISIVE, PRICE COMES SECOND. For any further questions, please contact Mr. Faller at the provided number. //*TRADE-IN, PART EXCHANGE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information without guarantee.* More offers available on our homepage. The description and details provided are not guaranteed and are not binding. The only binding agreement is the purchase contract concluded at the dealership upon purchase of the vehicle. Subject to errors and prior sale! Iodpexd Ancofx Ag Nsbc

Condition: used, Year of construction: 2019, operating hours: 4,764 h, fuel type: diesel, Equipment: cabin, head guard, * Claas Scorpion 746 telehandler * Rearview camera * Air conditioning Ibjdpfx Agowta Dvs Nec * Front wheel steering * All-wheel steering * Crab steering -----Internal vehicle number: 11072----Errors & prior sale reserved

Condition: used, mileage: 5,200 km, power: 90 kW (122.37 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 8,500 kg, empty load weight: 5 kg, maximum load weight: 2,900 kg, lifting height: 6,150,000 mm, number of seats: 1, first registration: 01/2016, operating hours: 5,200 h, total height: 46,800 mm, driver cabin: other, wheelbase: 2,850 mm, Boom 6 m, tires new and as good as new, various hydraulic connections renewed, lifting capacity 3,500 kg, with pallet fork and shovel, engine power 90 KW, 3,621 m³, wheelbase 2,850 mm, lifting capacity with max. boom 1.35 to, fully functional, max. load . 8,500 kg Note Despite careful checking of all our prices, it is not uncommon for errors to creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! Ijdpfx Agovikp Ns Nobc - .

Condition: used, Year of construction: 2015, operating hours: 5,500 h, power: 116 kW (157.72 HP), Equipment: compressed air brake,

Condition: used, Year of construction: 2025, operating hours: 158 h, Equipment: onboard computer, Claas Lexion 5400 Demo machine from 2025 Engine hours: 170 Drum hours: 96 Area: 279 hectares Equipment: Generation 1 Header drive XL, two-speed Cutterbar feed roller with 2-way system, M V-channel – AUTO CONTOUR, chain, open return roller Automatic drawbar coupling Dust extraction for E-/V-/HP-channel CRUISE PILOT, pre-equipped Header brake APS threshing system – Grain/Maize (10/18/18) Drum speed: 330–930 rpm Concave bar Center ridge for straw walker, fitted JET STREAM cleaning system, incl. 3D and grass wind reduction GRAINMETER incl. returns volume measurement with CEBIS display Top and bottom sieve, standard Grain tank 10,000 liters Grain tank prepared for unloading auger with grass support XL grain tank unloading auger, Ø 330 mm Grain tank unloading capacity 110 l/s Drive for grain tank unloading 80 l/s – 130 l/s Swivelable spout – XL grain tank unloading auger, Ø 330 Standard distributor – SPECIAL CUT, PREMIUM LINE, with SV Straw chopper drive for standard distributor – Premium Driving axle M – 20-bolt, with differential lock Drive axle tires: 800/70 R38 CHO 181D, 20-bolt Access ladder with collision protection Steering axle M, adjustable Steering axle tires: 600/65 R28 x 275 IMP, 8-bolt Travel speed 40 km/h Mercedes-Benz OM936 LA – 260 kW/354 hp (Stage V), air-cooled Fuel tank 950 liters Engine PTO pump Automatic climate control with heating, incl. additional pre-filter Radio sound system, digital (DAB+) with subwoofer Storage compartments with USB-C port in B-pillar Sun blinds for side windows Footrests on steering column, right/left Smartphone holder with wireless charging function Leather armrest and leather steering wheel Camera system, pre-equipped Rear-view camera, display in terminal Camera – drawbar coupling, PROFI CAM display Camera cable – XL grain tank unloading auger Camera – grain tank unloading auger, PROFI CAM display Camera monitor – PROFI CAM Ijdpfoxmluqex Ag Nobc Connection cable for A-pillar for CEMIS/PROFI CAM QUANTIMETER yield measurement Premium seat – leather, air-suspended LED work lights – Premium incl. work high-beam Steering interface prepared Steering system software for FIELD SCANNER Grain tank prepared for GPS PILOT Cool box, incl. instructor’s leather seat CEMOS DIALOG via CEBIS CEMOS AUTOMATIC – AUTO CROP FLOW CEMOS AUTOMATIC – AUTO SLOPE CEMOS AUTOMATIC – CRUISE PILOT Without GRAIN QUALITY CAMERA CMOTION multifunction lever Auto module Add-on module 1 Add-on module 2 Inclination sensor Steering angle sensor CLAAS communication module (LTE) FIELD SCANNER forefield sensor Locking system, standard LED rear lights, extendable Windscreen wiper system for front and side windows CAN Ethernet Gateway (CEG) GPS PILOT Ready Straw distribution plate adjustment module – standard distributor Machine connect license – 5 years Without centralized lubrication system Straw distribution plate adjustment, hydraulic – standard distributor Automatic direction adjustment for spreading Straw chopper – counter-blade/friction plate adjustment, hydraulic Dynamic steering Rear-view mirrors, electrically adjustable and heated Automatic chain lubrication for grain tank unloading Hose reel with air compressor hose and air gun Hand-wash tank including Claas Vario 770 and transport trolley Equipment: Rapeseed side knife, left Rapeseed side knife,

Condition: used, Year of construction: 2025, operating hours: 174 h, Equipment: onboard computer, Claas Lexion 8600 TT Demo Machine 2025 Engine hours: 174 Drum hours: 96 Hectares: 416 Equipment: Generation 1 Header drive XL, two-speed Cutterbar cylinder with 2-way system, XL HP channel - AUTO CONTOUR, track, open idler roller Automatic tow coupling Dust extraction for E-/V-/HP-channel CRUISE PILOT, prepared Without straw moisture sensor Cutterbar brake APS threshing system - Grain/Maize (10/18/18) Threshing drum drive - 330-930 rpm Concave grate ROTO PLUS MULTICROP 4/5 JET STREAM cleaning system incl. 3D GRAINMETER incl. returns volume measurement with CEBIS display Upper and lower sieve, standard Grain tank 13,500 liters Grain tank preparation for emptying aid grass Shut-off valve, grain tank unloading auger, 420 mm Grain tank unloading auger XXL, Ø 420 mm Grain tank emptying 180 l/s Grain tank emptying drive 150 l/s - 180 l/s Swivel outlet - grain tank unloading auger XXL, Ø 420 Radial distributor grain - SPECIAL CUT, PREMIUM LINE Auxiliary pump drive straw distributor with chaff blower Straw chopper drive for radial distributor - Premium Drive axle XL - TERRA TRAC Support wheels for crawler track Towing eyes for TERRA TRAC front axle TERRA TRAC track width 635 mm, Camso Access ladder with drive-off protection - TERRA TRAC Steering axle L, adjustable Steering axle tires 500/85 R30 x 335 IMP, 10-bolt, Mitas Travel speed 40 km/h MAN D2676 - 404 kW/549 HP (Stage V), air compressor Fuel tank 1,150 liters Engine PTO pump Automatic climate control with heating, incl. additional pre-filter Radio sound system, digital (DAB+) incl. subwoofer Storage compartments with USB-C socket in B-pillar Sun blinds for side windows Footrests at steering column, right/left Smartphone holder with wireless charging function Armrest leather and leather steering wheel Camera - rear, display in terminal Camera - tow coupling, PROFI CAM display Camera cable - grain tank unloading auger XXL Camera - grain tank unloading auger, PROFI CAM display Camera monitor - PROFI CAM Connection cable A-pillar for CEMIS/PROFI CAM CEMIS 1200 terminal QUANTIMETER yield measurement TC-GEO activation – CEMIS 1200 terminal Premium seat - leather, air-suspended LED work lighting - Premium incl. high-beam work lights Steering interface prepared Grain tank preparation GPS PILOT SAT 900 GNSS receiver - RTK NET activation Data volume for RTK NET use – 5 years GPS PILOT activation – SAT 900 GNSS receiver Cool box, incl. instructor's seat, leather CEMOS DIALOG via CEBIS CEMOS AUTOMATIC - AUTO CROP FLOW CEMOS AUTOMATIC - AUTO SLOPE CEMOS AUTOMATIC - CRUISE PILOT Without GRAIN QUALITY CAMERA CEMOS AUTOMATIC - 4D cleaning CMOTION multifunction joystick Interface module Auto module Add-on module 1 Add-on module 2 Inclination sensor Steering angle sensor CLAAS communication module (LTE) Locking system, standard LED rear lights, extendable Windscreen wiper system for front and side windows CAN Ethernet Gateway (CEG) GPS PILOT Ready Module for spreader plate adjustment - radial distributor CLAAS connect operating licenses (separate order) Machine connect license – 5 years Iedpfxsxmb Nqj Ag Nobc Automatic adjustment of chaff spreading direction Straw chopper - counter knife/friction floor adjustment, hydraulic Dynamic steering

Condition: used, Year of construction: 2025, working width: 9,100 mm, Mower Bar: Disc | Claas Disco 9300 Direct Swather Demo unit in use Year of manufacture: 2025 Large-area mower for rear tractor mounting, Cat. III - Working width: 9.10 m (8.90 m) - Main frame with optimized center of gravity due to rearward-angled outriggers - Low-speed concept with reduced speed to 850 rpm DIRECT SWATHER: Ibodpfx Ajwu Irkjg Njc - Central or unilateral swath merging via augers - Conical auger design for consistent crop flow - Swiveling augers for wide crop distribution - Auger discharge chute equipped with knife and counterknife Features: Wear skids Three-point hitch Drive shaft 1 3/8", 6-spline ISOBUS cable Outer protective curtains, hydraulically foldable Individual section lift (2-hose) Optionally available (not included in price): CLAAS Disco 3200 F Profil Front-mounted disc mower without conditioner 3.00 m working width with wear skids incl. ACTIVE FLOAT hydro-pneumatic suspension incl. drive shaft | Internal no.: 11264119

Condition: used, Year of construction: 2022, operating hours: 4,262 h, maximum speed: 50 km/h, Equipment: all wheel drive, compressed air brake, Claas Axion 850 Cmatic CIS+ Year of manufacture 2022 Currently 4,100 operating hours Equipment: Ijdpfx Aowblkksg Nobc 600/70 R30 Mitas SFT / fixed rim / wide track width 710/70 R42 Mitas SFT / fixed rim CLAAS front linkage 4.6 t External control for front linkage 3-point cast iron weight 900 kg CIS+ control terminal, color display CMATIC including 2 speed memories (CIS+) Task Control Basic activation, tractor side AUTO PILOT / GPS PILOT Ready TELEMATICS advanced license – 1 year CLAAS Remote Service including five-year license ELECTROPILOT with reversing function Steering interface ready Steering interface activation Electronic Hitch control, standard ELC Lower link rear linkage, Cat. 3 catch hook Lower link stabilizers, automatic Long hydraulic top link, Cat. 3 catch hook Towing bracket with drawbar insert Drawbar with tow ball Ball coupling including tow bar, automatic Cat. 3/3 ball set Air brake system (2- and 1-circuit pre-adjustment), including air dryer Load-sensing hydraulic system, variable pump 150 l/min, 200 bar 4 control valves, electrohydraulic proportional No front connections if front linkage is installed Power Beyond, load-sensing connections with flat-face couplers CMATIC - Continuously Variable Transmission Gear ratio 50 km/h Front axle with PROACTIV brakes PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6-piece and 1 3/4" 6-piece Parking brake on the REVERSHIFT lever CMATIC 2.0 - Cruise control deactivation via accelerator pedal (CIS+) 264 hp max. power, 261 hp homologated Rated power, ECE R 120 Electronic battery main switch Air compressor Engine brake Cabin with 4-point suspension Roof with rear-opening roof hatch Tinted rear window for 4-post cab Rear window wiper, including right-hand side wiper Electric mirror, including wide-angle mirror Rear fender flares, external width 2.75 m Removable storage box, left Additional interface sockets 2 spare driver's headlights, A-pillar Extra-wide halogen taillights with warning signs 4 halogen headlights, 2 halogen work lights, hood Halogen work lights: 4 front roof lights, 4 rear roof lights Premium LED work lights Comfort seat, fabric, semi-active, laterally suspended Passenger seat with seat belt Automatic climate control, including Cat. 3 preparation MP3 radio with Bluetooth, USB, SD, external microphone, and hands-free system | Internal No.: 11060349

Condition: new, Year of construction: 2023, operating hours: 700 h, Equipment: all wheel drive, Claas Axion 870 Cmatic Cebis Demo unit in use, currently approx. 700 operating hours Equipment: - CLAAS front linkage, 5.8 t lift capacity - External controls for front linkage and front spool valves - CEBIS control terminal with touch function - CMATIC transmission incl. 2 engine speed memories + CSM, CEBIS - 250 Amp/hour alternator - ISOBUS pre-installation including rear ISO socket - Task Control Basic unlock, tractor side - AUTO PILOT / GPS PILOT Ready - CLAAS communication module (LTE) - CLAAS Remote Service incl. five-year license - ISOBUS activation for CEBIS - CLAAS connect & 365FarmNet – XXL - ELECTROPILOT with shuttle function - Video function enable for CEBIS + CPC cab connection for 2 cameras - Steering interface prepared - Steering interface activation - Electronic hitch control (EHC) with radar sensor and slip control - Rear lower link Cat. 3 with catch hooks - Automatic lower link stabilizers - Long hydraulic top link, Cat. 3 with catch hook - Hitch frame with slot for swinging drawbar - Automatic tow hitch with 38 mm pin diameter - Dual-circuit air brake system incl. air dryer - Load-sensing hydraulic system, variable displacement pump 205 l/min, 200 bar - 5 + 2 electrohydraulic proportional spool valves - Mid-mount spool valves with assignments for front linkage and 1x double-acting front + 1x double-acting front - Power Beyond, load-sensing connections without flat-face couplers - CMATIC – stepless transmission - Transmission ratio 50 km/h - PROACTIV front axle, braked - PTO 540/540 ECO + 1000 rpm - PTO shafts 1 3/8" 6-spline and 1 3/4" 6-spline - Parking brake on REVERSHIFT lever - Front mudguards, pivoting, 620 mm - Max. output 295 HP, rated output 284 HP, ECE R 120 - Electronic main battery switch - 4-point cab suspension - Tinted rear window for 4-post cab - Rear window wiper, incl. right side wiper - Electric mirrors incl. wide-angle mirror - Rear fender extensions, overall width 2.75 m Iedpfowmxqnjx Ag Nebc - Additional interface sockets - 2 LED driving headlights, A-pillar mount - Wide-load LED tail lights with warning panels - 4x LED driving lights, 2x LED work lights on bonnet - Premium LED work lights - Premium LED working illumination - Comfort seat, fabric, semi-active longitudinal/lateral suspension - Passenger seat with seatbelt - Automatic climate control, incl. Cat. 3 prep - MP3 radio with Bluetooth, USB, SD, ext. microphone and hands-free Incl. NOKIAN Soil King VF tires - Front: 600/70R30 - Rear: 710/70R42 Incl. steering system CEMIS 1200 + SAT 900 receiver | Internal no.: 11113406

Condition: used, Year of construction: 2023, operating hours: 100 h, power: 107 kW (145.48 HP), maximum speed: 40 km/h, front tire size: 540/65R24 BKT, rear tire size: 650/60R28 BKT, Equipment: all wheel drive, compressed air brake, Claas Arion 470 CIS+ approx. 30 operating hours Current equipment: Rear tires: BKT 650/60R 38 Front tires: BKT 540/65 R24 CLAAS front linkage 2.8 t incl. external control Iedjv R Niwepfx Ag Nebc External operation at front linkage (CIS) 2 engine speed memories with starting gear and automatic shifting Alternator 200 A/h ISOBUS pre-installation, rear Unlocked Task Control Basic, tractor-side Multifunction lever with ELECTROPILOT Revershift function on multifunction lever Rear linkage, electrohydraulic, 6.25 t Lower links Cat. 3 with hook ends Top link Cat. 3/2 with hook ends Automatic tow hitch with 38 mm pin diameter Compressed air braking system (dual-circuit) Additional air connection, right cabin side Hydraulic system load-sensing (150 l/min) 3 valves, electrohydraulic proportional, CIS+ Mid-mounted valves assigned to front linkage and 1x double-acting/rear 2 front couplers HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension incl. steering angle sensor Rear axle, standard PTO 540/540 ECO + 1000 rpm PTO stub 6-spline, 1"3/8 With automatic PTO, rear SMART STOP with cruise control management 145 HP max. output, 154 HP homologated rated output, ECE R 120 Master battery switch, automatic, electronic 6-post PANORAMIC cab, 2-point cab suspension Mechanical mirrors, incl. wide-angle, telescopic Additional interface sockets 2 auxiliary headlights on roof, halogen Main headlights + 2 work lights on engine hood LED work lights: 2x front, 4x rear Comfort seat, fabric, low-frequency suspension, heated Passenger seat with safety belt MP3 radio with Bluetooth, USB and hands-free kit Cool box for 1.5 l bottle (under instructor seat) Automatic all-wheel drive, steering angle dependent | Internal No.: 11114182

Condition: used, Year of construction: 2025, operating hours: 246 h, CLAAS Jaguar 940 Demonstration Machine 2025 Equipment: Best Brand - Driver's Package: Comfort cab with A/C MATIC (automatic air conditioning and heating) Electric and heated rearview mirrors LED maintenance and access lighting DAB+ radio Premium LED work lighting Cooling unit for storage box L Sun blinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package - Crop flow L and carbide counterblade Assistant package: DYNAMIC POWER Iedpfx Agowfivre Nebc Camera system, ready AUTO Fill wagon filling system V-FLEX 28 chopping unit, including corn knife MULTI CROP CRACKER MAX 120/130 teeth with Busa CLAD coating Silage additive system with tank (375 l) and ACTISILER 37 Electro-hydraulic accelerator gap adjustment Drive axle with differential lock Front tires 710/75 R34 Front tire pressure control system Mercedes Benz R6-cylinder OM471 LA (390 kW/530 hp) Compressed air horn Rear camera with CEBIS display PROFI CAM QUANTIMETER yield measurement Steering angle sensor STOP ROCK stone detector CAM PILOT steering pilot Dynamic steering Compressed air brake PickUp 300 Profi Contour | Internal No.: 11277163

Condition: new, Year of construction: 2025, Claas transport trailer 10.80 m Iodpfx Aew Tfvceg Nebc 2-wheel steered New machine | Internal No.: 11331279

Condition: new, Year of construction: 2023, Number of rotors: 6 | Claas Volto 65 Hay Tedder New machine, year of manufacture: 2023 - Tedder for 3-point linkage, Cat. I+II - Working width: 6.40 m - Drive: 540 rpm - 6 rotors, each with 6 tine arms - Rotor diameter: 1.50 m - Tool-free spreading angle adjustment - Double spring tines Ø 9.5 mm with 5 coils each - Tines are identical length and of Super C quality Iedow S Ra Repfx Ag Nobc - Adjustable tine follow-up at -7°/0°/+7° - Integrated tine loss security - Protective bracket holders made of fiberglass-reinforced GRP - Rotor tyres: 6 x 16x6.50-8 - Transport width: 2.75 m - Weight: approx. 710 kg - Hydraulic requirement: 1 single-acting spool valve | Internal no.: 11113100

Condition: new, Year of construction: 2024, operating hours: 1 h, Claas Liner 2800 TREND New machine, year of manufacture 2023 Ijdpfew S Rbhox Ag Nebc - Twin-rotor rake for central swath placement - Hitch attachment to lower links, Cat. II - Drive 540 rpm - Working width 7.40 m – 8.20 m (with swath curtain 7.50 m – 8.20 m), hydraulically infinitely adjustable (with flow divider) - 2 swath rotors, each with 3.50 m diameter - 12 tine arms per rotor - 4 double spring tines per tine arm - CLAAS silage tines Ø 9.5 mm, angled downward by 10° - Rotor chassis with 16x6.50-8 tyres - Integrated tine loss protection - Foldable protection bar - Warning plates with lighting - Transport dimensions: height 3.99 m (with tine arms), width 2.97 m - Hydraulic requirements: 1 single-acting and 1 double-acting circuit - Weight: approx. 2,220 kg | Internal no.: 11181107

Condition: new, Year of construction: 2024, operating hours: 100 h, Claas Torion 738 T Sinus Used demo machine Year of manufacture: 2024, currently approx. 100 operating hours Equipment: - Tool carrier TPZ, hydraulic - Tool carrier control from cab - 13-pin rear socket - Automatic drawbar coupling - Continuous function for 3rd auxiliary hydraulic circuit - 3rd auxiliary hydraulic circuit, front - Hydraulic couplers, plugged, 1 pair - 405/70 R18 Mitas EM-01 tires - Maximum speed: 40 km/h Ibjdpfx Aow Szg Ieg Noc - Engine: Yanmar 3.3 l, 54 kW, ISO 14396, Stage V - Reversible cooling fan with automatic function - Diesel particulate filter - Battery master switch - Radio incl. Bluetooth, hands-free system with external microphone - Air conditioning - Steering column, tilt and height adjustable (two-way) - Driver’s seat, fabric cover, low-frequency suspension, with seat heating - Exterior mirrors, mechanically folding and heated - Multifunction joystick - Wide-angle mirror - Right-hand opening window, 180-degree opening angle - 2x LED work lights front - 2x LED work lights rear - Halogen main headlights - Sunblind/front - Sunblind/roof window - Ride control (vibration damping) - Grease bar on rear axle - Programmable automatic bucket return - Lift height/depth memory programming (SMART LOADING) - Bucket position indicator on terminal Offer does not include attachments. Additional attachments can be offered on request. | Internal ref.: 11180829

Condition: new, power: 34 kW (46.23 HP), Year of construction: 2024, operating hours: 48 h, Equipment: air conditioning, Weight: 4600 | CLAAS Torion 530 Wheel Loader New machine, built in 2024 Ibedpfxjrfbyqo Ag Njc Approx. 50 operating hours Technical specifications and equipment: 4-cylinder Yanmar engine with 34 kW / 46 hp Two-stage hydrostatic drive Z-kinematics Hydraulic locking on the tool carrier Mitas 350/70 R18 tires Cabin with heating Air conditioning Radio including hands-free system Steering column, 2-way tilt and height adjustable Driver's seat with fabric upholstery, air suspension, and seat heating Armrest on the left LED work lights, yes, 2 front and rear Vibration damping Slow-speed control, including engine speed memory Approved as a self-propelled work machine (LoF, 20 km/h) | Internal No.: 11113547

Condition: new, Year of construction: 2024, operating hours: 176 h, Claas Scorpion 756 Used demo machine Currently approx. 150 operating hours Equipment: CLAAS tool carrier, hydraulic, incl. lifting bolts Swivel angle 150° / 152° Emergency lowering for telescopic arm Front socket, 4-pin Rear socket, 7-pin Automatic height-adjustable towing hitch 3rd & 4th auxiliary hydraulic circuit front (double acting) incl. continuous flow function Ijdpfxjwfivxo Ag Nobc Pressure relief front, from cab and externally at telescopic arm 3rd auxiliary hydraulic circuit front (double acting) incl. continuous flow function Top frame cover Boom wiper, front 40 km/h VARIPOWER PLUS 500/70 R24 Michelin Bibload tyres Deutz engine, 4.1 litres, 115 kW, Stage V Pre-separator for vacuum Reversible cooling fan with automatic function Diesel particulate filter Combination display instrument, multicolour display 3.5" Interior rear view mirror Air conditioning Windscreen and roof window wipers Steering column, tilt and height adjustable in two stages Driver's seat, fabric cover, low frequency, with seat heating Radio with Bluetooth, hands-free system with external microphone LED work lights on telescopic arm, front, 2 units Sunblinds for roof and windscreen LED work lights, 3 front & 3 rear Vibration damping Automatic bucket return Central lubrication points, 3 locations (front, rear, telescopic arm) Central lubrication system, prepared Creeper speed drive and hand throttle with DYNAMIC POWER Bucket cylinder shaking function EC certificate of conformity Overload warning system | Internal no.: 11180852

Condition: used, Year of construction: 2019, operating hours: 3,000 h, power: 173 kW (235.21 HP), front tire size: MICHELIN 540 /65 R30, rear tire size: TRELLEBORG 650 /65 R42, Equipment: air conditioning, all wheel drive, compressed air brake, Front linkage | Claas Axion 830 Cmatic cebis Year of construction 2019 approx. 2600 operating hours Equipment: CLAAS front power lift 4.6 t CEBIS control terminal with touch function CMATIC incl. 2 speed memories + CSM, CEBIS AUTO PILOT Electron. Linkage control, standard EHR Hydraulic top link long, catch hook cat. 3 5 + 2 control units, electrohydraulic proportional Center axle control units with FKH assignment and 1x dw/front +1x dw/front Power Beyond, load-sensing connections without flat-face coupler 40 km/h PROACTIV front axle PTO shaft 540/540 ECO + 1000 rpm 235 hp max. power, 240 hp homol. rated power, ECE R 12 including steering system S10 without front weight | Internal no.: 11236543 Ibsdpfoudp Ubex Ag Njc

Condition: used, Year of construction: 2018, operating hours: 1 h, working width: 10,700 mm, Mower Bar: Disc | Claas Disco 1100 C Business Year of manufacture: 2018 Category III mounting Working width: 9.40 m to 10.70 m Transport width: 2.95 m Weight: 3,520 kg Load-sensing couplings ISOBUS control (Communicator II also included) Steel tine conditioner 9 discs per mower bar PTO shaft Wear skids Isdpfxsw Hh Sno Ag Njbc Hydropneumatic suspension Internal ref. no.: 10844757