Used Cnc Horizontal Borer for sale (13,810)

Condition: ready for operation (used), Manufacturer: Leistritz AG, Nuremberg Type: POLYMAT 50/400 CNC-S Fpedpo Ah Ivnjfx Aansp Year of manufacture: 1990 Control system: Leistritz POLYMAT CNC (fk electronic) Maximum cutting width: approx. 50 mm Maximum working stroke: approx. 400 mm Maximum pulling force: approx. 15.9 kN Feed per stroke: approx. 0–0.5 mm Maximum cutting speed: approx. 20 m/min, continuously variable Maximum return speed: approx. 40 m/min Table size: approx. 440 × 595 mm Hydraulic drive: approx. 5.5 kW Connection: 380 V / 50 Hz Machine weight: approx. 1,700 kg

Condition: ready for operation (used), Year of construction: 2009, Control: Fanuc 31i Chuck diameter: 2500 mm Max. turning diameter: 2800 mm Max. workpiece height: 2000 mm Vertical travel of the slide: 800 mm Horizontal travel of the slide: 1500 mm Feed rates: 10 m/min horizontal, 5 m/min vertical Max. spindle power: 60 kW (AC) Max. spindle speed: up to 60 rpm Max. workpiece weight: 25 tons Travel of the cross slide: 1500 mm Automatic tool changer (ATC): 2 units (on each side) Fedpfx Aae Ah R Rcsnspp Tool positions per changer: 8 Machine weight: approx. 45 tons

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, machine/vehicle number: HorizOne50_5, overall weight: 1,500 kg, tool height: 300 mm, operating speed: 10 mm/s, total length: 1,850 mm, total height: 1,250 mm, total width: 850 mm, reverse speed: 40 mm/s, working height: 1,000 mm, table width: 1,000 mm, table length: 1,000 mm, table height: 1,000 mm, stroke length: 250 mm, pressing force: 50 t, length stop: 1,000 mm, working width: 300 mm, lifting speed: 10 mm/s, bending force (max.): 50 t, warranty duration: 36 months, Electric horizontal bending machine HorizOne 50 with spindle drive from CoastOne in Finland. Fpodj Ah Sb Aspfx Aansp 500kN pressing force thanks to precise and low-maintenance spindle drive with servo motor and servo controller. Simple, intuitive programming with the proven CoastOne TC12-2D control system. Automatically controlled side stop for convenient processing of your sheet metal parts from individual part production to series production.

Condition: used, Year of construction: 1992, CNC Milling Center Mori Seiki Type/Model: MH-40 Condition: Used Year of Manufacture: 1992 Control: Fanuc Technical Data Travel range X-/Y-/Z-axis: 560 x 500 x 510 mm Spindle axis to table distance: 50 - 550 mm Spindle nose to table distance: 100 - 610 mm Table size: 400 x 400 mm Max. table load: 400 kg Max. workpiece diameter: 610 mm Table type: M16 thread 24, pitch 80 Spindle speed: 7000 rpm Taper bore: 7/24 taper No. 40 Diameter of front bearing: 80 mm Rapid traverse speed: 20000 mm/min Cutting feed rate: 0.1 - 5000 mm/min Tool holder: BT 40 / CAT 40 Number of tools: 60 Max. tool diameter: approx. 100 mm with adjacent positions occupied Max. tool diameter: approx. 150 mm with adjacent positions free Number of pallets: 2 Pallet changing system: rotating design Spindle motor: 11 kW Feed motor X-/Y-/Z-axis: 1.8 / 3.5 / 3.5 kW Power connection: 40 kVA Footprint: approx. 1850 x 3710 mm Machine height: approx. 2550 mm Weight: approx. 10,000 kg Fsdpfx As Ahyz Eeanepp Equipment: Internal coolant supply, 70 bar Inquiry item: Transportation costs will be provided in a separate offer.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours Fpjdpfx Aaspumdcenjp *

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Volumetric speed: 520 mm / s Fjdpedyl H Nsfx Aanepp Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Fedpfx As Aazdxoanepp Scraper chip conveyor It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: Fpjdpfx Aao Ahfbdsnop - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: ready for operation (used), Year of construction: 1980, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 1,200 rpm, number of axes: 5, This 5-axis FERMAT WHN 13.8 CNC was manufactured in 1980 and overhauled in 2008. It features a generous X-axis travel of 3,500 mm, Y-axis travel of 2,000 mm, and Z-axis travel of 1,250 mm. The machine includes a robust table size of 2,200 x 1,800 mm and can handle a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality machining capabilities, consider the FERMAT WHN 13.8 CNC horizontal machining centre. Contact us for further details. Fodpfx Ae Agvr Sjanspp - Original Year of Manufacture: 1980 - Overhaul / Modernization Year: 2008 (by FERMAT CZ s.r.o.) - Heidenhain main drive module for Y-axis renewed in 2026- CNC Control: Heidenhain iTNC 530 (with installed Service Pack and electronic handwheel) - Controlled Axes: 5 axes (X, Y, Z, W, and B)- Travel W-Axis (Spindle stroke): 800 mm - B-Axis: NC rotary table (360°) - Table Dimensions: 2,200 x 1,800 mm - Max. Workpiece Weight on Table: 12,000 kg - T-Slots: 11 slots; 24 H7; 160 mm pitch - Spindle Diameter: 130 mm - Tool Taper: ISO 50 - Spindle Speed Range: 5 to 1,200 rpm - Main Drive Power: 37 kW - Rapid Traverse: 6,000 mm/min - Positioning Accuracy: ± 0.02 mm - Installed Power Capacity: 50 kVA - Machine Dimensions: approx. 7,800 x 7,200 x 4,900 mm - Footprint / Ceiling Clearance: approx. 50 m² floor space; required installation height 6,300 mm - Machine Weight: approx. 38,000 kg - Included Equipment & Features: Chip conveyor system, separate electrical control cabinet, hydraulic supply unit, technical documentation and operating manual (Version Breuer 060412)

Condition: reconditioned (used), Year of construction: 2016, operating hours: 20,564 h, turning diameter over cross slide: 742 mm, turning length: 700 mm, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, turning diameter over bed slide: 920 mm, overall weight: 4,700 kg, bar diameter (max.): 80 mm, CNC Lathe Manufacturer: DMG MORI Model: NLX 2500 Y | 700 Year of manufacture: 2016 Control system: Celos Mitsubishi M730U Technical specifications: - Turning diameter: 366 mm - Turning length: 700 mm - Swing over bed: 920 mm - Swing over cross slide: 742 mm - Max. spindle speed: 4,000 rpm - Drive power - main spindle: 18.5/18.5/15 kW - Max. bar diameter: 80 mm - Number of tool stations: 12 pos. - Tool interface: BMT 80 - X-axis: 260 mm - Z-axis: 795 mm - Y-axis: +/- 50 mm - Tailstock taper: MT5 - Operating hours: approx. 20,564 h - Power-on hours: approx. 28,664 h - Machine weight: approx. 4.7 t The machine has been refurbished with the following components: - Ball screws in X, Y, and Z axes - New main spindle - Complete maintenance package - Re-aligned and calibrated This puts the machine in like-new technical condition. Equipment & accessories: - Tool turret, 12 pos. BMT 80, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang length for driven tools: 100 mm - Scraper-type chip conveyor - High-pressure coolant system (5 bar) - Coolant shower at main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical interface for 150 mm oil mist collector - 4-color signal light - EtherNet/IP interface for automation 2 machines are available. Price per unit. Fedpfxeyvvt Sj Aanjpp In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Year of construction: 2017, condition: used, spindle speed (max.): 5,000 rpm, turning length: 500 mm, CNC Lathe Manufacturer: DMG MORI Model: CTX beta 500 Year of manufacture: 2017 Control system: Heidenhain CNC-Pilot 640 Technical specifications: Turning length: 500 mm Spindle speed: 5,000 rpm Drive power - main spindle: 100/40% duty cycle (ED) 25/34 kW Tool interface: VDI 30 Number of tool stations: 16 positions Spindle operating hours: approx. 3,528 h Condition: used Fsds Ahkf Sspfx Aanspp Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal price extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows 2) IT integration with a post-processor ----- Machine still in operation, available for viewing! ----- Technical Summary (detailed description available upon request!): ----- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails Fedpfx Aaey Hl Iyonspp - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Fodpfxey N Du De Aanepp Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Year of construction: 2022 Empty weight: 10.500 kg VAT/margin: VAT qualifying Used Moovmor HX800 65T semi auto horizontal baler for sale at CHESS The Moovmor HX800 series is designed for bulk loading and high throughput in industrial type baling operations. Large load aperture with charge-box to facilitate fast loading of baling materials. Bale size 1100x1100x1600mm bale weight (up to and material dependant) 750kg. Machine has low hours and has been used indoors Features – Vertical (Portcullis type) hydraulic end door – Full bale eject of each bale – High and low pressure baling modes Fpsdps Agvbfjfx Aansp – Horizontal bale tying 4 wire ties (optional 5 wire) – Hardox plated floor and press plate base – “V” shaped serrated bale chamber shear blades – Anvil type material cutting knives – PLC control and diagnostics – Enclosed power pack – weather and vandal protection – High density mill sized bales with tie off lengths adjustable to 1600mm long Moovmor HX800 65T semi auto horizontal baler ready for inspection at our yard contact us for more information!

Condition: refurbished (used), Year of construction: 2019, operating hours: 2,791 h, load capacity: 2,000 kg, lifting height: 51 mm, fuel type: electric, mast type: simplex, construction height: 1,374 mm, Manufacturer: Jungheinrich Type: Jungheinrich ECE 220 - Electric Order Picker Drive type: Electric Load capacity: 2,500 kg Lift height: 51 mm Load center: 500 mm Fpodpsy Rm Ucofx Aanep Year of manufacture: 2019 Serial no.: 90579504 Mast type: - Fork length: 1,000 mm Overall height: 1,374 mm Own weight: 860 kg Battery voltage: 24V Charger: 24V - (on request) Attachments: - Special equipment: Front tires: Polyurethane Rear tires: Polyurethane

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and a traversing table, designed for the precise machining of aluminum and the finishing of steel. The machine was designed for high accuracy, rigidity, and large travel ranges and is ideally suited for demanding milling, drilling, and sawing operations in the metal and aluminum profile sector. Year of manufacture: 2013 Operating hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Heavy-duty steel construction, precision linear guides, servo drives, automatic central lubrication - Traversing table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100×100 mm - Max. load capacity 2,000 kg SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 stations + 1 pick-up station (tools up to Ø 500 mm) Fsdox H Ib Njpfx Aanjpp 5-AXIS HEAD: - C3 swiveling head, swivel ranges approx. C ±200°, A ±120°, high positioning accuracy MEASURING TECHNOLOGY: - m&h wireless measuring probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS system (internal & external lubrication) - Full protective cabin, separate tool change compartment - Mist extraction system with electrostatic separation (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" operating panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Operational – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Assistance with dismantling, loading and transport possible (at extra cost) HIGHLIGHT: - New replacement spindle from Omlat included (approx. €25,000) All information has been provided to the best of our knowledge and belief. Subject to change, errors and prior sale.

Condition: used, Year of construction: 2006, 1 used CNC cylindrical grinding machine Manufacturer: Cetos Type: BUC 85C-CNC-3000 Year of manufacture: 2006 Control system: Siemens 840 D Grinding length: 3000 mm Maximum grinding diameter: 850 mm Weight: 20 tons Fjds Ahwfxepfx Aanepp Dimensions: 8970 x 4315 x 2900 mm Includes belt filter system.

Condition: used, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper Fsdpfxjx E Tmbe Aanspp • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: used, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety Fsdpfx Aasx E Ttbsnspp • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: good (used), Year of construction: 1996, CNC lathe, manufactured by INDEX, model G200, year of manufacture 1996, with Hydrobar bar feeder. Control system: Siemens. Maximum turning diameter: 200 mm Maximum turning length: 445 mm Spindle bore: 30 mm Fpodpfx Aaj Aicyaonjp Further data can be found in the datasheets. Machine documentation available. Machine in good condition.

Condition: good (used), Year of construction: 2003, CNC turning machine, manufacturer: INDEX, type: G 200-4, year of manufacture: 2003 Control system: Siemens Chuck diameter: 160 mm Spindle bore: 42 mm Turning diameter, max.: 200 mm Turning length: 445 mm Chip conveyor, machine, documentation included. Without tailstock. Fedpo Aicyzsfx Aanjpp Further data can be found in the data sheet. In good condition.

Condition: good (used), Year of construction: 2006, CNC Horizontal Machining Center, Manufacturer: HÜLLER HILLE, Type: BLUESTAR 5, Year: 2006 Control system: SIEMENS Sinumerik 840D. Fjde Aicw Aspfx Aanspp Travel distances: 700 mm (Y), 680 mm (Z), 700 mm (X) Rapid traverse rate: X, Y, Z: 50 m/min Pallet size: 500 mm x 500 mm Spindle connection: HSK 63, magazine with 40 positions Spindle speeds: Up to 10,000 rpm Chip conveyor, internal cooling system, machine documentation available. Machine in good condition. Further details can be found in the data sheets.

Condition: used, Year of construction: 2021, turning diameter 42/200 mm turning length 430 mm control Fanuc 3li-B clamping chuck diameter 165 mm turret (x-stations) 2x12 travel -y axis 70 mm range L-W-H 2645 x 1645 x 1900 mm total power requirement 11/7,5 kW turning speeds 6000 U/min gripping station 42/200 mm load magazine Breuning IRCO SIMag chip conveyor Knoll kW coolant filtering unit Knoll kW total power requirement 11/7,5 kW weight of the machine ca. 6250 kg Fsdpo Ah T Ulofx Aanspp CNC Turning & Milling machine Miyano ANX 42 SYY

Condition: used, Year of construction: 2014, pressing force: 170 t, Hydraulic CNC turret punch press with increased stroke, 8 controlled axes, and a fully automatic angle measuring system. Manufacturer: AMADA Model: HD 1703 L NT Machine type: CNC turret punch press / press brake Year of manufacture: 2014 Press force: 1,700 kN (170 tons) Table length: 3,110 mm Maximum bending length: 3,110 mm Distance between uprights: 2,700 mm Overhang: 435 mm Maximum stroke: 350 mm Installed height without tooling: 620 mm Control system: AMADA AMNC PC Controlled axes: 8 Angle measuring system: Fully automatic Back gauge: CNC-controlled Fpedpfx Aj Aibkbjanep Motor supply according to nameplate: 200 V Connection power: 16 kVA Hydraulic oil tank: 120 l Machine length: 4,750 mm Machine width: 2,750 mm Machine height: 3,170 mm Overall height: 3,190 mm Machine weight: 11,000 kg Serial number: G100112 Date of manufacture: 10/2014 Accessories: Foot pedal, tool cabinet with bending tools, front workpiece supports, side safety devices.

Condition: used, Year of construction: 2006, pressing force: 31 t, Used CNC turret punching machine AMADA EMZ 3610 NT with AC servo direct drive, automatic tool changer, and automatic re-feeding device. Manufacturer: AMADA Model: EMZ 3610 NT Machine type: CNC turret punching machine Year of manufacture: 2006 Punching force: 300 kN (30 t) Working area: 1,500 x 2,500 mm (according to available information) Tool stations: 45 Drive: AC servo direct drive Control: GE Fanuc Series 180i-PB Tool changer: Automatic turret tool changer Re-feeding device: Automatic Tool turret: With AMADA tool holders Material support: Brush table Connected power: 27 kVA Fodpfx Aas Aibiwsnjpp Noise level: 91 dB(A) Stroke length: 360 mm Machine weight: 24,500 kg Condition: Used