Used Cnc Universal Grinding Machine for sale (84,151)

Condition: used, Year of construction: 1995, Surface grinding machine Manufacturer: Jung Model: JA 500 CNC-C Year of manufacture: 1995 Overhauled in: 2003 Grinding length: 500 mm Grinding width: 200 mm Max. workpiece height: 250 mm Table dimensions X/Y: 600 mm / 200 mm Grinding wheel diameter: 225 mm Iodpswp E Rgefx Addsal Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Speed: 4,200 rpm Machine weight: approx. 2,500 kg

Condition: good (used), Year of construction: 2001, Z&B Starline 500 CNC surface and profile grinding machine year of manufacture 2001 Siemens 840D control x, y, z 600 x 380 x 250 mm magnet 500 x 250 mm ball screw for the x-axis grinding wheel max 350 x 50 mm variable grinding wheel speed TAW table dresser Isdswz N Elepfx Addsal paper band filter 6x grinding wheel and flange documentation

Condition: good (used), Year of construction: 2009, Control: Siemens 828-D SL Max. grinding diameter: 500 mm Max. grinding length: 2000 mm Max. workpiece weight: 500 kg between centres Swiveling of grinding head: +45 / -15° (manual) Grinding wheel: 500/80/203 mm With steady rests Ijdjxyv Uzepfx Addoal With enclosure

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control manufacturer: Siemens, Model Sinumerik 840D sl Powerline, 2 work areas, 2 cross slides, X/Z travel, 2 spindles, rotational speed, C-axis workpiece spindle: 3,000 rpm, high-frequency internal grinding spindle: (51,000 rpm) (for grinding arbor), max. feed rates Z 30 m/min, X 90 m/min, max. workpiece diameter 100 mm, max. workpiece length 50 mm, 2x 8-position tool turrets, tool holder Capto C5, workpiece automation with drag conveyor system and gripper, coolant system, paper band filter, oil separator manufacturer: Mahle, type LGA601, oil mist extraction, recooling unit manufacturer: Hydac, chip conveyor manufacturer: Astos Iajdpfjx Ahivex Addsl +++ Attention: This machine is part of an online auction! +++

Condition: used, Year of construction: 2020, grinding diameter 390 mm Iasdpfxox Rn Uqj Addsl grinding length 650 mm centre height 200 mm workpiece weight max. 250 kg x-axis 380 mm z-axis 1150 mm sanding disc diameter 400 mm peripheral speed 20-50 m/sec workpiece spindle stepless 1 - 650 U/min tailstock quill taper MT 4 quill stroke 45 mm dia. of quill 50 mm total power requirement 22 kW

Condition: good (used), grinding diameter 450 mm grinding length 600 mm centre height 140 mm workpiece dia. 280 mm number of turns of spindle head 63 - 400 U/min grinding wheel speeds 20-35 m/s Isdpfjxcblqsx Addjal dimensions of the machine ca. 2,4 x 1,9 x 2,1 m

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 100 kg, wheel width: 400 mm, grinding wheel diameter: 400 mm, helix angle: 45 °, table diameter: 180 mm, table load: 100 kg, wheel diameter: 400 mm, overall weight: 10,000 kg, travel distance Z-axis: 660 mm, Equipment: documentation/manual, CNC Gear Grinding Machine HOFLER HELIX 400KK Diameter-Ø max: 400mm Dimeter-Ø min: 10mm Number of teeth variable Profilhöhe max: 35mm Modul: 1-10 Grinding head inclinaison: 45° Spindle speed max: 5400 1/min Counter height max: 745mm Table weight: 100 kg Total weight ca. 10000 kg Werkzeugdaten: Grinding wheel-Ø max: 300mm Grinding wheel-Ø min: 80mm Iaodpfox Nfwaex Addol Width max.: 30mm bore-Ø: 160mm Siemens 840 D Alle Achsen CNC gesteuert Ölnebelabsaugung Filtration unit Hydraulic clamping Dittel balancing unit Accessories with machine available : Various grinding wheel available 1 Diamnod disc Tailstock rotative and fixed( fest und mitlaufend )

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Reishauer RZ 362A with approx. 60 sets of diamond wheels Grinding worm dimensions: Min/Max. outside diameter: 280/350 mm Width: 84/104 mm Max. module with restrictions: MOD 8.0 (DP 3.2) Iasdpfjxb Ufujx Addol Number of starts: with restrictions up to 3 Max. usable width (axial shift): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Dressing device Approx. 60 sets of diamond wheels Grinding stones Turbo separator

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Magnetic plate 500 x 250 mm Misc.accessories Iaodpfx Ademmdhrsdel MARCELS MASCHINEN CH

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Serial No.: 2219, Control unit manufacturer: Siemens, Model: Sinumerik 840D sl, 2 spindles, spindle distance: 210 mm, max. speed approx. 4000 rpm, W-axis tool spindle / grinding spindle: 2000 rpm, max. workpiece diameter: 100 mm, max. workpiece height: 40 mm, 8-position tool turret by Sauter, Model: 0.5.480.516, tool holder: Capto C5, workpiece automation device by DVS, Type: Moduline, transfer robot by Epson, PLC system control by Siemens, Simatic Panel Touch display, coolant system by Knoll, Type: KF150/950, paper band filter, chip conveyor by Knoll, Type: 225S-2/170. Iasdjx Ahg Uspfx Addsl +++ Note: Machine is part of an online auction! +++

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Iedstqf Sqjpfx Addeal Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 004-040.0004, CNC Cylindrical Grinding Machine Manufacturer: STUDER Model: S22 CNC Year of manufacture: 2009 Machine / Workpiece Data Distance between centers: approx. 650 mm Center height: 175 mm Maximum workpiece weight: 150 kg Maximum grinding length: approx. 800 mm Linear Axes / Guides X-axis (cross slide): Maximum travel approx. 310 mm X-axis feed rate up to approx. 15,000 mm/min (depending on configuration) Z-axis (longitudinal slide): Maximum travel approx. 850 mm Z-axis feed rate up to approx. 30,000 mm/min Grinding Spindle / Grinding Wheel Main spindle power, e.g. 12.5 kW in the standard version Standard grinding wheel diameter e.g. Ø 500 × 80 × 203 mm, circumferential speed up to approx. 50 m/s Optional high-speed grinding (HSG): e.g. grinding wheel Ø 400 x 40 x 127 mm, circumferential speed up to approx. 140 m/s Control / Software / Equipment Control, standard: e.g. FANUC 31i-A (PC integrated) with StuderWIN operator interface Guideways: Machine bed made from Granitan® S103 (mineral cast) for thermal stability and damping Dimensions / Electrical Data Machine weight approx. 8,500 kg Iaodpfextpnzsx Addel Power supply, typically 400 V / 50 Hz (country-specific)

Condition: used, Year of construction: 1993, Technical details: rotary table diameter: 2x700 mm grinding height: 200 mm grinding head - power requirement: 15 kW max. dia. of grinding wheel: 400 mm Iodou Ngp Nepfx Addsal grinding spindle speed: 1400-2800 stufenlos /continous U/min automatic feeds: 0,001-0,02 weight of tools max.: 650 kg table speed: 5-10 m/min rotary table revolutions per minute : 5-10 stufenlos U/min rotary table: Querbewg. 0,2...10 m/min total power requirement: 49 kW weight of the machine ca.: ca. 12,0 t dimension machine xH: 6,0x3,0x2,8 m dimensions electric cabinet LxWxH: 2,0x0,55x2,2 m ROTARY TABLE SURFACE GRINDING MACHINE - 2 magnetic rotary tables each Ø=700mm - diamond roller dressing device - without coolant unit i.D. *

Condition: ready for operation (used), Year of construction: 2001, operating hours: 87,310 h, functionality: fully functional, grinding wheel width: 400 mm, grinding wheel diameter: 600 mm, grinding diameter: 220 mm, overall weight: 13,000 kg, TECHNICAL DETAILS Maximum grinding diameter: 220 mm Regulating wheel width: 400 mm Maximum grinding wheel width: 400 mm Grinding wheel drive: 55 kW Maximum circumferential speed: 45 m/s Regulating wheel dimensions: 350 x 400 x 203 mm CBN grinding wheel dimensions: 500 x 400 x 304 mm Aluminum oxide grinding wheel dimensions: 600 x 400 x 304 mm Grinding spindle headstock Total stroke of grinding spindle headstock: 130 mm Ijdpfx Aoxvxhcsddoal Speed of grinding spindle headstock: 150 m/min Rapid traverse adjustment max.: 150 m/min Minimum infeed of grinding spindle headstock: 0.0005 mm Preselectable infeed size of grinding spindle headstock: 0.0005–0.05 mm Grinding wheel dresser Dresser support speed: 15–900 m/min Maximum stroke of dresser supports: 430 mm MACHINE DETAILS Overall power requirement: 75 kVA Dimensions & Weight Space requirement approx.: 4.47 x 2.77 x 2.49 m Machine weight approx.: 13 t Operating hours: 87,310 h

Condition: new, Year of construction: 2025, functionality: fully functional, CORMAK UWS3 universal tool grinding machine for sharpening and tool grinding as well as drill bits, mills, chisels, tool bits, etc. grinding. Grinding machine intended for universal applications due to its adjustable 24-position head. It can be used for grinding drilling bits, mills, tool bits, etc. Durable design and precisely constructed spindle ensure optimal efficiency Diameter 100 mm Thickness 50 mm Hole diameter 20 mm Speed 5200 rpm Sleeves diameter range 3–16 mm Taper angles range 0–180º Negative angles range 0–52º Clearance angles range 0–44º Tool holder longitudinal movement 140 mm Iaedsv E Ek Hopfx Addel Tool holder microregulation range 18 mm Longitudinal spindle movement microregulation range 6 mm Motor 0.25 kW 230V Weight 45 kg Machine dimensions 450×350×340 mm

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders Iajdpfexuv Udox Addjl The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Iaedpfx Adstqf Rzodol Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Year of construction: 2019, condition: excellent (used), Machine capacity CAPACITIES · Height of centre points Max. diameter for cylindrical grinding Distance between centres Max. length for cylindrical grinding Max. workpiece weight without steadies | Metric | |---|---| | 335 mm | | 450 mm | | 2150 mm | | 2100 mm | | 260 kg | TECHNICAL DATA Metric GRINDING SPINDLE UNIT Cylindrical grinding spindle 1: Electric spindle Max. grinding wheel dimensions: 610 × 50 × 203.5 mm Peripheral speed of grinding wheel: 30 - 125 m/sec Max. grinding spindle speed: 4420 min⁻¹ Cylindrical grinding spindle 2: Electric spindle Max. grinding wheel dimensions: 350 × 20 × 127 mm Peripheral speed of grinding wheel: 70 - 110 m/sec Max. grinding spindle speed: 6000 min⁻¹ X & Z AXES X & Z axes movement: ball screw X-axis traverse path: 460 mm X-axis speed range: 0-5000 mm/min X-axis resolution: 0.0001 mm Z-axis traverse path: 2590 mm Z-axis speed range: 0-5000 mm/min Z-axis resolution: 0.0001 mm B AXIS Swivel angle: 0 - 180° Type: automatic via torque motor C AXIS Workpiece speed range: 0-750 min⁻¹ Coupling type: headstock and tailstock TM 5 Tailstock sleeve diameter: 80 mm Tailstock sleeve stroke: 80 mm Tailstock adjustment accuracy: +/- 200 μm Iasdpfx Adsxr I Anjdjl EQUIPMENT DETAILS GRINDING WHEEL DRESSING DEVICE Type: dressing station with fixed points for cylindrical grinding + electric spindle for diamond dressing roll COOLANT SYSTEM Type: magnetic separator and filter paper Flow rate / output: 50-200 l/min Tank capacity: 2000 litres Pump pressure: 5-20 bar OIL MIST EXTRACTION UNIT Volume flow / exhaust quantity: 2000 m³/h Max. power: 2.3 kW CNC CONTROL Brand: Siemens Model: Sinumerik 840 SL Unit system: metric MEASURING SYSTEMS FOR X & Z AXES Type: linear encoder

Condition: used, Year of construction: 1995, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz Iasdpfxjx Hpz Dj Addel KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem KEL-POS Marposs

Condition: used, Year of construction: 2006, Technical data: Iaodpoxzq I Sofx Addel Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: excellent (used), Centre height 175 mm Centre distance 650mm Iaodpjbfbaqofx Addol

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, center height: 125 mm, grinding length: 400 mm, 1 used external cylindrical grinding machine Bahmüller ASP 400, center height 125 mm, grinding length 400 mm, year of manufacture 1989, completely overhauled in 2004 by G+H Geibel&Hotz. New SIEMENS CNC 840 D control system, new SIEMENS AC motors for X and Z axes as well as workpiece spindle, otherwise fully enclosed and newly painted. Without coolant tank. Iasdpexy Sk Ejfx Addsl

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Ijdpfx Asx Aupisddoal

Year of construction: 2001, condition: good (used), table diameter 200 mm Iasdpfx Ajtt Tb Deddel workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 380078, overall weight: 13,500 kg, grinding diameter: 600 mm, center width: 1,100 mm, Equipment: rotational speed infinitely variable, Universal cylindrical grinding machine WEMA Glauchau SU 6-R – Year of manufacture 2014 Universal cylindrical grinding machine for internal, external, face, and taper grinding Universal cylindrical grinding machine SU 6-R by Werkzeugmaschinenfabrik Glauchau GmbH, year 2014, delivered on 28.02.2014. The machine is in well-maintained, ready-to-operate condition and is offered complete with a wide range of internal and external grinding spindles, filtration system, coolant unit, and accessories. Accessories & Clamping equipment: - Magnetic chucks (various diameters) - Workpiece holders - Grinding wheels in various sizes - Clamping devices - Spare and wear parts package - Measuring equipment (e.g., precision measuring device in cabinet) - Grinding wheel flanges - Tool holders - Various replacement filter rolls Condition: - Machine currently installed - Fully functional, regularly used - Interior well-kept, grinding area clean - Control, handwheel, and panel without visible damage - Accessories complete and neatly arranged - Viewing possible by arrangement Control: Siemens Sinumerik 840D sl, OP010C, 26.4 cm color display Operator PC: PCU 50.5-C, WinXP-based 40 GB hard drive, 12 GB available for applications Workshop-oriented programming (WOP) operating system Software status according to documentation: NC: V 02.07 SP3 HF10 HMI: V 07.06 SP2 HF7 11 axes according to configuration (HMI/NCK enabled) Space requirements: Machine: approx. 5000 x 4000 mm (L x W) Iedpfxex Ekcme Addoal Cooling unit: 3000 x 1200 mm (L x W) Working area Max. swing diameter: 650 mm Grinding diameter: internal 600 mm, external 650 mm Max. grinding length: 600 mm Center distance (external grinding): 1100 mm Max. workpiece weight (between centers): 150 kg Workpiece spindle head Internal clearance: 58.5 mm Speed range: 1–795 rpm Spindle nose DIN 55026 A8 Swiveling mechanism B1-axis: −1° to +12° U-axis travel: 300 mm Slides & Grinding units X2-axis travel: max. 470 mm Z2-axis travel: max. 800 mm Table stroke Z1-axis: 800 mm Internal and external grinding spindles: Internal (B2-axis, spindle turret) 1 spindle turret with stepless angle adjustment (1/1000°) Mounting for 2 internal grinding spindles Quick-change mechanism Supplied spindles: SFIV 60×315, hybrid bearings, approx. 38,000 rpm SPV 100×315, HSK-C50, approx. 16,000 rpm SSA 100×400, flange Ø140–250 mm, up to approx. 200 mm depth Internal grinding spindle 7.5 kW, 2,000–7,000 rpm (with Sinamics) External grinding unit 45° Wheel diameter: Ø600×50×Ø203.2 mm Grinding wheel silicon carbide, centrally guided Automatic balancing system (vibration sensor, control unit) Filtration system REBER compact belt filter, Type 13-P90131 Paper belt filter Magnetic tape separator Geared motors, fully functional Drain trough & sludge box included 4.2 Oil / Coolant chiller Hyfra TRK30-EF, year 2013 Cooling capacity: 4000 W / 37 °C Refrigerant: R134a 3/PE 400 V, 7.2 A 4.3 Recooler Hyfra Chilly 35, year 2013 Cooling capacity approx. 2.2–3.9 kW Refrigerant: R407c 4.4 Sight window Visiport VP220, rotating sight window