Used Colour Pumps for sale (10,399)

Condition: new, For sale: Professional industrial pump from the renowned manufacturer KSB. The pump is in new condition (ex-stock/warehouse storage) – unused, with possible storage marks visible in the photos. ⚠️ Sale concerns the pump only – electric motor not included. ⚙️ TECHNICAL DATA Manufacturer: KSB Model: ETACHROM BC 80-250 / 1104 Year of manufacture: 2000 Capacity: up to approx. 160 m³/h Head: approx. H-14 Dkodpfx Apez Slxasmsw Type: centrifugal pump Construction: single-stage Connections: flanged Design: industrial, heavy-duty 🔧 APPLICATIONS Water installations Industry Process systems Cooling Liquid circuits ✅ CONDITION New – stock item Unused Fully operational construction No motor included 📦 ADDITIONAL INFORMATION ➡️ Option to purchase an electric motor ➡️ Matching motor available – additional cost: €700

Condition: excellent (used), Year of construction: 2012, functionality: unexamined, For sale: KSB Sewabloc K 65-250 G V industrial pump with a 2.2 kW electric motor. Centrifugal pump, monobloc design, with flanged connections. Data from the nameplates: Manufacturer: KSB Model: Sewabloc K 65-250 G V Year of manufacture: 2012 Nominal flow rate: 6.22 l/s, approximately 22.4 m³/h Head at the nominal point: 8.05 m Dkjds Aibg Hspfx Apmsw Motor power: 2.2 kW Power supply: 230 V Δ / 400 V Y, three-phase Frequency: 50 Hz Pump speed: 1455 rpm Impeller diameter: 170 mm Motor protection rating: IP55 Motor efficiency class: IE2 Unit weight according to the nameplate: approximately 103 kg Condition: used. Visible signs of use, localized paint chipping, and superficial surface corrosion. Appearance matches the photos. NOTE: THE STATED PRICE APPLIES TO ONE UNIT – ONE PUMP WITH MOTOR.

Condition: used, functionality: fully functional, For sale: KSB KRTF 80-200/24 UH industrial submersible pump, designed for pumping wastewater and contaminated water. Robust, cast iron construction with a lifting handle. Data from the nameplate: Capacity: 45 m³/h – 45,000 liters per hour Head: 5 m Motor power P₂: 1.8 kW Power supply: three-phase 400 V Dsdpfo Aibc Hex Apmekw Frequency: 50 Hz Rated current: 4.3 A Rotational speed: 1450 rpm Ingress protection: IP68 Operating mode: S1 – continuous operation Insulation class: F Weight: 108 kg Equipment visible in the photos: Float switch Power cord with plug and electrical module Discharge elbow with barbed connector Lifting handle The pump is used, with visible signs of wear, paint chipping, and surface corrosion. The visual condition and scope of sale are shown in the photos.

Condition: new, For sale: new, unused KSB Etachrom B industrial pump – complete, in original packaging, with manufacturer’s documentation. The pump is designed for industrial and process applications – high-quality workmanship, made in Germany. Technical data (from the nameplate): Manufacturer: KSB Series / Type: Etachrom B Flow rate (Q): 18.0 m³/h Head (H): 45.0 m Impeller diameter: Ø 181 mm Rotational speed: 2904 rpm Operating pressure: PN10 Dsdez Slpfopfx Apmokw Medium viscosity: 1.0 mm²/s Year of manufacture: 2023 Made in Germany Certifications: CE, EAC, UKCA Condition New – ex stock Never commissioned Original box Operating/installation manual included Condition exactly as pictured Applications Industrial installations Process systems Cooling, process water Technical and production installations

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Dkodpfxjz Slx To Apmow Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition complete pump with motor no visible mechanical damage rotates freely Dkodpfx Ajz Sl Etopmow visual condition as shown in the pictures (storage marks, surface rust)

Condition: excellent (used), For sale: FEZER pump. The pump is in very good condition. Dkjdpfx Aez Saw Rspmew - Flow rate: 16 m3/h

Condition: excellent (used), Electric Hydraulic Pump - Power supply: 380V - Oil capacity: 7 liters Dkedpez Sk D Ijfx Apmew - Pressure: 25 Bar - Condition: very good.

Condition: excellent (used), For sale: BECKER vacuum pump, type 80/4-90. This unit comes from an industrial application and is in good used condition. The pump is equipped with a power cable and a CEE plug. Technical data from the nameplate: Manufacturer: BECKER Type: 80/4-90 Year of manufacture: 2004 Motor: three-phase (3~) Motor number: 6603410 Power at 50 Hz: 0.75 kW Rotational speed: 1420 rpm Current: 4.5 / 2.6 A Voltage: 175–254 V Δ / 300–440 V Y Frequency: 50 Hz cos φ: 0.70 Dkedpfoz Spa Asx Apmjw Protection class: IP55 Operating mode: S1 Power at 60 Hz: 0.90 kW Speed at 60 Hz: 1720 rpm CE marking Standard: EN 60034 According to the service label, the manufacturer recommends an inspection every 5000 operating hours. The pump has normal signs of use. The visual condition and the scope of delivery are clearly shown in the photos.

Condition: excellent (used), For sale: an industrial submersible pump with a 7.5 kW three-phase motor, equipped with a power cable with a power plug and a flanged discharge connection. Data read from the nameplate: Motor power: 7.5 kW Supply voltage: 380 V Dkodpfxjz Sphmj Apmew Rated current: 17 A Rotational speed: 2850 rpm Performance range: 0–160 m³/h Head range: 35–0 m Power factor cos φ: 0.92 Insulation class: F Serial number: 8353767 The maximum flow rate and maximum head refer to different operating points of the pump. Equipment and construction: Metal housing. Lower suction basket. Base for vertical positioning. Lifting eye. Flanged discharge connection. Power cable with power plug. Condition: used, visible signs of wear, scratches, and corrosion on the discharge connection. The visual condition is shown in the photos.

Condition: excellent (used), For sale: EMU KS 24 industrial submersible pump, equipped with a power cable with a CEE power plug and a discharge connection with a Storz-type coupling. Technical data from the nameplate: Manufacturer: EMU Unterwasserpumpen GmbH, Hof, Germany Model: KS 24 Motor designation: F 13.1-2/9 Power: 2.36 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current: 4.7 A Rotational speed: 2900 rpm Winding connection: star (Y) Year of manufacture: 1994 Approximate performance according to an additional chart: Head Approximate flow rate Dkjdpsz Sphysfx Apmjw 0 m — free outlet 59.5 m³/h 5 m 52 m³/h 10 m 45 m³/h 14 m 38.5 m³/h 18 m 20 m³/h

Condition: excellent (used), For sale: a Rietschle VFT 40 (111) vacuum pump, manufactured by a reputable German company. This unit is designed for industrial applications requiring vacuum generation, including packaging machines, printing machines, woodworking machines, CNC machines, and vacuum-based transport systems. The pump is equipped with a three-phase Flender ATB-Loher motor with a power of 1.5 kW and is mounted on a robust mounting plate. Technical specifications: Manufacturer: Rietschle Model: VFT 40 (111) Year of manufacture: 1996 Country of manufacture: Germany Type: vacuum pump Performance: 40 m³/h (50 Hz) 48 m³/h (60 Hz) Maximum vacuum (ultimate pressure): 150 mbar (abs) Motor power: 1.5 kW (50 Hz) / 1.8 kW (60 Hz) Rotational speed: 1420 rpm (50 Hz) 1680 rpm (60 Hz) Power supply: 3×400 V Motor protection class: IP54 Serial number: 1749048 Condition: Used. Dkedpsz Snarjfx Apmjw Visual condition is consistent with the photos. Robust construction, ready for further operation.

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the photos. The following markings were read from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on the Pump Nameplate Pump Designation FD 07W02, SN 000001 Dksdpoz Spfrofx Apmew Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on the Valve Nameplate Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the photos. Before purchasing, it is recommended to compare the complete markings on the nameplates, as well as the shaft and connections, with the requirements of your machine.

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. Dksdpsz Slqijfx Apmew The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125.1/222 centrifugal pump with a 2.2 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-G 32-125.1/222 • Design: G11 • Identification number: 48862594 Dkedpoz Snugjfx Apmsw • Pump number: 5-927-141345/1 • Flow rate: 3–24.5 m³/h • Head: 27.5–17 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FS 90L2A-60 • Motor number: 367694 MX • Power: 2.2 kW • Voltage: 220–240/380–420 V • Current: 7.8–7.2/4.5–4.3 A • Speed: 2850 rpm • cos φ: 0.89 • Protection class: IP55 • Insulation class: F • Operating mode: S1 The unit has a sticker from the Elektromotoren Reparaturwerk ROCK specialist service, indicating an inspection carried out in November 2017. The pump and motor were likely refurbished and inspected by a specialist service. Used condition. Normal signs of use and storage are visible. The exact condition is shown in the pictures.

Condition: excellent (used), For sale: DDR motor pump. - 800 l/min - 28 hp - In very good condition. Dedpfxez Sk H As Apmekw

Condition: excellent (used), For sale is a professional IVECO Magirus TS 8/8 fire pump, equipped with a powerful, gasoline engine, FIAT 156 A 2.000, with a power output of 32 kW. This robust unit is designed for intensive use – suitable for fire brigades, industrial plants, farms, technical services, municipal companies, and for pumping large volumes of water. The pump is conveniently started using an electric starter. It also has an emergency manual start option. An integrated control panel ensures easy operation. Dkedpfxez Spdho Apmsw Pump Data: Manufacturer: IVECO Magirus AG Type: FP 8/8 / TS 8/8 Standard: DIN 14420 / DIN 14410 Year of manufacture: 1997 Serial number: 86385 PVR test number: 346/6/90 Nominal flow rate: 800 l/min Nominal pressure: 8 bar Pump rated speed: 2820 rpm Gear ratio: 1:1 Weight of the ready-to-use pump: 189 kg Engine Data: Manufacturer: FIAT Auto S.p.A. Engine type: 156 A 2.000 Capacity: 999 cm³ Power: 32 kW at 5000 rpm Limited operating speed: 3500 rpm Fuel: unleaded 95 gasoline Start: electric starter Emergency manual start Battery included Equipment: automatic PRIMATIC suction system two pressure gauges work light integrated fuel tank control panel with indicators RPM adjustment pump clutch discharge valves sturdy transport frame with handles The pump is in very good condition and is solidly built. It shows normal, minor signs of wear consistent with its age. The condition and completeness of the unit are accurately depicted in the photos. This is a very powerful, professional pump with a flow rate of up to 800 liters per minute – ready for fire, industrial, and agricultural applications. Shipping on a pallet is possible.

Condition: used, functionality: fully functional, For sale: a used submersible pump with a capacity of 160 m³/h, powered by a 7.5 kW motor and operating on 380 V. Djdpfx Apo Aibriemekw The pump has been inspected and is in full working order. Condition/defect: a crack in the outer part of the housing casting. The pump has been fully tested and confirmed to be working; this defect does not affect its operation.

Condition: new, Year of construction: 2019, functionality: unexamined, WILO EMU FA 10.62E SUBMERSIBLE SEWAGE PUMP – 5 kW 400 V ATEX WILO EMU FA 10.62E – PROFESSIONAL SEWAGE PUMP FOR PUMP STATIONS AND SEWERAGE SYSTEMS For sale is an original WILO EMU FA 10.62E submersible sewage pump with an FK17.1-4/12KEx motor, 5 kW power, and 400 V three-phase power supply. This is an industrial sewage pump designed for the transport of municipal and industrial wastewater, as well as contaminated liquids, in appropriately designed installations. The pump from the German manufacturer WILO belongs to the professional EMU FA series, used in water and sewage installations, sewage pumping stations, and wastewater treatment plants. Key parameters: • Manufacturer: WILO – Made in Germany • Model: EMU FA 10.62E • Motor power: 5 kW / 5000 W • Supply voltage: 400 V, three-phase • Nominal flow rate: 115.6 m³/h – 115,600 l/h • Nominal head: 9.1 m • Year of manufacture: 2019 • Protection class: IP68 • Motor design: Ex / ATEX Djdpfs Aibg Rex Apmskw POWERFUL SUBMERSIBLE SEWAGE PUMP – KEY FEATURES HIGH EFFICIENCY – 115,600 L/H The pump’s nominal flow rate is 115.6 m³/h. The unit is designed for transporting large volumes of wastewater in professional pumping systems. 5 KW / 400 V INDUSTRIAL MOTOR Three-phase WILO FK17.1-4/12KEx motor with a rated power of 5 kW, designed for operation in industrial installations. IP68 SUBMERSIBLE PUMP Design intended for submerged operation. The maximum immersion depth according to the nameplate is 20 m. EX / ATEX EXPLOSION-PROOF DESIGN The pump is equipped with a motor with a factory Ex marking. Use in explosion-hazard areas requires the specific installation to comply with the manufacturer’s documentation and applicable requirements. ROBUST HYDRAULICS FOR WASTEWATER Centrifugal pump with hydraulics designed for transporting wastewater and liquids containing contaminants. According to the FA 10.62E series documentation, a single-channel impeller is used. TECHNICAL DATA – WILO EMU FA 10.62E Parameter Value Brand WILO Series EMU FA Model FA 10.62E Motor type FK17.1-4/12KEx Type Submersible sewage pump Rated power P2 5.00 kW Power supply 3 × 400 V Frequency 50 Hz Rated current 10.80 A Motor speed 1400 rpm Nominal flow rate 115.6 m³/h Nominal head 9.1 m Protection class IP68 Operating mode S1 Maximum medium temperature 40°C Maximum immersion depth 20 m Impeller diameter 220 mm Design Ex / ATEX Year of manufacture 2019 Country of manufacture Germany The stated flow rate and head values refer to the pump’s nominal operating point.

Condition: new, functionality: unexamined, Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens INDUSTRIAL PUMP GRUNDFOS CR15-5 5.5 kW – VERTICAL MULTISTAGE 400V SIEMENS IE4 The GRUNDFOS CR15-5 K-F-A-E-HQQE is a professional, vertical multistage centrifugal pump designed for industrial installations, pressure boosting systems, water supply systems, and technological systems. Equipped with an energy-efficient Siemens / Innomotics IE4 motor with a power of 5.5 kW, it provides high performance and efficient operation in demanding water installations. Original Grundfos pump – catalog number 93138502, manufactured in Denmark. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Manufacturer code: CR15-5 K-F-A-E-HQQE KEY ADVANTAGES Flow rate: 17 m³/h (17,000 l/h) – suitable for industrial and water installations. Maximum head: 74.6 m – for systems requiring high pressure. Power: 5.5 kW, power supply: 400V – three-phase Siemens IE4 motor. Maximum pressure: 16 bar – robust industrial design. Vertical multistage pump – compact design. Hydraulic components made of stainless steel – durability and corrosion resistance. Mechanical seal: HQQE – professional Grundfos solution. Protection class: IP55 – motor adapted for industrial operation. Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Brand: Grundfos TECHNICAL DATA GRUNDFOS CR15-5 Manufacturer: Grundfos Model: CR15-5 K-F-A-E-HQQE Product number: 93138502 Type: centrifugal pump, vertical, multistage Motor power: 5.5 kW / 5500 W Flow rate (from nameplate): 17.0 m³/h Head H: 61.8 m Maximum head Hmax: 74.6 m Maximum pressure: 16 bar Maximum liquid temperature: 120°C Pump speed: 2919 rpm Frequency: 50 Hz Seal: HQQE Country of manufacture: Denmark Operating mode: S1 – continuous Grundfos CR15-5 5.5kW 400V 17m3/h Vertical Multistage Pump, Siemens. Type: other APPLICATION OF THE INDUSTRIAL PUMP Dksdpfj Aibhcsx Apmsw The Grundfos CR15-5 pressure pump can be used in: booster sets and pressure boosting systems, water supply and industrial installations, water treatment and filtration systems, cooling installations and technological circuits, industrial washing systems, HVAC installations and circulation systems, production lines and process installations. Pump selection requires consideration of the hydraulic characteristics of the installation and the type of fluid.

Condition: new, The Lutz Type ME II 5-230 is a professional, industrial-grade explosion-proof universal motor designed for drum and container pumps. Manufactured by Lutz Pumpen, it is specifically engineered for safely transferring highly flammable, combustible, and hazardous low-viscosity liquids such as solvents, fuels, and alcohols. Specifications Voltage: 220–230 V AC / 50 Hz (Single-phase power) Power Output: 540–580 W (approx. 0.78 HP) Current: 3.0 A Enclosure Protection: IP54 (Dust and splash-water protected) Explosion Protection Rating: ATEX certified (II 2 G Ex de IIC T6) Dksdpez Erynjfx Apmsw Weight: Approximately 6.6 kg (14.5 lbs) Key Features & Safety Mechanisms Double-Shell Housing: Built from robust, chemical-resistant materials to protect internal components from corrosive vapors and heavy handling. Low-Voltage Release (LVR): An essential safety feature that prevents the motor from automatically restarting after a power outage, protecting operators from unexpected spills or splashes. Quick-Action Coupling: Allows for rapid, tool-free connection to various Lutz pump tubes (immersion tubes) made of polypropylene, PVDF, stainless steel, or aluminum. Brand new never used. Please check out our other listings as well.

Condition: new, Year of construction: 2025, Efficient Dsdpfx Apotu H Eismjkw Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1"

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete Dkodpszw T Sxjfx Apmow * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: used, Centrifugal Pump, Pump 7.5 kW, Ritz, Used Machine Overall Dimensions: Length: 650 mm Width: 450 mm Dksdpe Ah Ebhjfx Apmew Height: 510 mm Manufacturer: Ritz Electrical Data: 400V; 7.5 kW; 15.1 A Flow Rate: 54 m³/h Head: 16 m

Condition: used, Hydraulic Pump Unit, Seipee 37 kW Industrial Electric Motor with Hydraulic Pump and Dual Filter Assembly, Used Machine Technical Specifications Manufacturer: Seipee (Made in Italy) Type: GM 225S 4 B3 Year of Manufacture: 2011 Power Output: 37 kW Speed: 1480 rpm Djdpfxo Ahx Dzo Apmekw Voltage: 400/690 V (Delta / Star) Frequency: 50 Hz Rated Current: 66.2 A (Delta) / 38.4 A (Star) Efficiency Class: IE2 (92.7% efficiency at 100% load) Power Factor (cos φ): 0.87 Protection Class: IP55 Overall Dimensions Width: 1620 mm Depth: 515 mm Height: 590 mm Weight: 400 kg