Used Comil Cf 2000 for sale (7)

Condition: used, Brand:Comil Type:CF2000 E+N Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Note:The film shown is from a simular machine Iaodpoimdx Tofx Addol

Year of construction: 2003, condition: used, Machine for assembling and pressing furniture bodies, completely automatic, and self-regulating, reads the dimensions of the piece and positions the elements according to the dimensions read. The pressing is with an electromechanical system, the pressing force is adjustable with potentiometers on the control console. The pressing has been intentionally moved to the beginning of the machine, so that the operator has to make the minimum path in case of working on the furniture being pressed Clamp for passing furniture bodies Useful working area in height from 300 mm to 1220 mm Working area in width from 300 mm to 2500 mm Working area in depth from 200 mm to 610 mm Height of the work surface from the ground 550 mm Motorized belt with speed 16 m/min Installed power 0.75 kW Weight 2000 kg Motorized transfers with loading and unloading belt Isdpfxev Am Egj Addoal

Condition: good (used), Self-adjusting through-clamp for movable bodies • Min/max usable length: 2500 mm • Min/max depth: 600 mm Isdpfxouh Ai Ho Addjal • Min/max useful height: 1200 mm • No. 3 side stops • Compressed air consumption: 6 bar • Installed power: 1.1 kW • Dimensions: 7050 x 1300 mm

Condition: used, Specifications: Composed of 2 motorized 90° curved conveyors. Curve radius: 3 m at axis. Total deployed length: 4.80 m. Overall conveyor structure width: 750 mm. Varnished beechwood slats: 620 x 54 x 42 mm. Adjustable height from floor: 500–650 mm. Driven by chains and sprockets. Lateral guidance and lower return via slide rails made of synthetic material. Integrated drive gearmotor. Contactor-disconnector box. Emergency stop and isolator. Ijdpfx Adex Sx Iqjdjal Control cabinet with electronic frequency inverter operating both curved belts.

Condition: ready for operation (used), Technical characteristics Single column unloader with suction cups. It is suitable for unloading in machining lines requiring machines with reduced dimensions. BODY OF THE MACHINE The machine is composed of a vertical column, a horizontal bracket fixed to the carriage, a carriage fixed to the bracket and a suction cup holder frame unit. The carriage slides on linear guides equipped with ball bearings and is driven by a gear motor controlled by a frequency variator. SUCTION CUPS PANEL COLLECTION GROUP It consists of a suction cups row containing 10 suction cups with bellows to facilitate the separation of the panel. Suction cup diameter of 95 mm. The suction cups are operated by a vacuum pump with a flow rate of 22 m3/h. ELECTRICAL CABINET The machine is equipped with a separate electrical cabinet, managed by a PLC operating logic. PROTECTIONS FOR THE PREVENTION OF WORK ACCIDENTS The machine is protected on all the action perimeter of the suction cups group by protective panels. The battery insertion area is protected by a grid with button opening. DIMENSIONS OF THE WORKABLE PANELS : Length: 320 to 2700 mm Width : 250 to 700 mm Thickness : 12 to 50 mm Maximum weight : 50 kg Pneumatic brake idler roller LOAD TRANSFER IN SINGLE LONGITUDINAL ROW Transfer of introduction with inclined rollers to the left, covered in PVC. The rollers are driven by small belts activated by a gear motor under the control of a speed variator. The transfer is also equipped with a left hand guide adjustable by handwheel. Structure The structure is made of welded steel, reinforced to ensure maximum stability and precision during the operating phases. Work surface The worktop is made up of a transfer in four independent sections. The first section includes : An input transfer with flat belts driven by an asynchronous motor controlled by a frequency converter The second and third sections (drilling planes) each include: A belt transfer with: flat belts driven by asynchronous motor controlled by frequency converter A lateral reference guide, installed on the left side of the machine, with lateral stop function Pneumatic end stops for the positioning of right and left panels A lateral presser guide to guide and clamp panels of different widths against the lateral reference stop. Iodpfx Adok Rticedoal The fourth section includes: a belt transfer for the evacuation of the panels with : flat belts driven by asynchronous motor controlled by frequency checker. Machining center The first center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the direction of the Y axis, 9 independent vertical mandrels The second center consists of a mobile carriage along the X axis on which two independent drilling heads are installed along the Y and Z axes. Each drilling head is composed as follows: In the X direction, 10 independent vertical chucks In the Y direction, 9 independent vertical spindles. Each operating head is suitable for the installation of an additional operating unit to be chosen as an option Axis movements Precision linear guides with circulating ball bearings and brushless motors for X,Y,Z axes. Rectified helical rack coupled to two pinions to allow the recovery of the play along the X axis. Hardened and ground ball screw (Y,Z axis). Pneumatic balancing device (Z axis) of the drilling unit. Numerical control XNC model bas

Condition: used, Iepakošanas mašīna Ražotājs: Comil Modelis: Star 2006 Svars 1300 kg Gads 2006 Iasdjwm Dvcjpfx Addsl

Condition: good (used), Year of construction: 2003, CONTROL SYSTEM Iaodpfx Aeiy Eaaoddjl • Numerical control: NC 1000 TECHNICAL FEATURES • Useful working area “X” (min – max): 300 – 2.500 mm • Useful working area “Y” (min – max): 250 – 700 mm • Useful working area “Z” (min – max): 13 – 50 mm WORKING UNITS • Nr. 1 + 1 Drilling units on Nr. 2 independent movable beams completed of: – Nr. 20 + 20 Vertical drilling spindles – Nr. 3 + 3 Double horizontal drilling spindles in “X” – Nr. 1 + 1 Double horizontal drilling spindles in “Y” • Nr. 2 Inserting units for hinge plates and hangers