Used Compressed Air Tank for sale (30,814)

Condition: good (used), Year of construction: 1998, Compressed air tank, pressure vessel, pressure tank, compressed air boiler, pressure vessel, compressor tank Nksdpfx Aaophun Escsu -Manufacturer: Mechanical and container construction, standing compressed air container -Content: 3000 l -Operating pressure: 11 bar -Accessories: including attachments, see photos -Dimensions: Ø 1475 x 2760 mm -Weight: 700 kg

Condition: good (used), Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, compressor tank, compressed air reservoir, compressed air storage tank, compressor tank -Manufacturer: Elektra-Beckum, compressed air tanks, compressed air storage -Contents: 150 L -Operating pressure: 11 bar Nkodpeya Dfijfx Aacsu -Dimensions: 1460/510/H530 mm -Weight: 92 kg

Year of construction: 1980, condition: ready for operation (used), Two compressed air tanks are available. 1) Karl Kremsmüller u. Co., year of construction: 1980, operating pressure: 7bar, test pressure: 9.1bar, operating temperature: 20°C, medium: compressed air, capacity: 5300l. 2) Engelbert Dax, year of manufacture: 1973, capacity: 15000l, operating pressure: 4ATÜ, test pressure: 5.2ATÜ. On-site inspection is possible. Nkedpoumwg Eofx Aacsu

Condition: good (used), Year of construction: 1990, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, pressure vessel vacuum vessel standing -Contents: 455 L -Operating pressure: max. 13 bar -Accessories: including attachments see photos -Quantity: 1x container available -Dimensions: 1020/755/H1900 mm Nsdpfx Aaswwg Aascoku -Weight: 518 kg/piece

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar Njdpfx Aasd Atx Eecsku -Dimensions: 270/250/H480 mm -Weight: 8 kg

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure vessel, compressor tank -Compressed air tank galvanized -Content: approx. 25 l -Dimensions: 630/470/H302 mm -Weight: 14.2 kg Nkjdshubdxjpfx Aacju

Condition: good (used), Year of construction: 1992, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank, compressed air tank -Manufacturer: Zeidler & Uhl, vacuum container standing, galvanized -Contents: 455 L -Operating pressure: -0.6 bar / max. 16 bar -Accessories: including attachments see photos -Number: 2x containers available Njdpfx Aajwra H Ioceku -Price: per piece -Dimensions: 860/650/H1610 mm -Weight: 374 kg/piece

Condition: used, Year of construction: 1997, Technical details: content: 500 cbm capacity in bar: 11 operating pressure: 11 bar weight of the machine ca.: 0,23 t dimensions L x W x H: Ø 620 mm x 1800 mm Pressure tank Pressure vessel according to directive 87/404/EEC Mark of conformity TÜV NORD 2017 Stands on base frame = steel profile frame welded. Connecting pieces: 1/2" with locking valve; 1/2" with plug; 1" with manometer; 1" with plug Connecting piece 2x left/right 1" with hose connection Temperature range min./max.: -10°C / +50°C Equipment: Ceiling support pressure hose (inside Ø 20mm) length 4m Pressure reducer with adjustable double connection Nkjdpfou Nz S Eex Aacou *

Condition: used, Year of construction: 1994, Technical details: Njdju Nz Tiepfx Aaceku tank capacity: 150 l operating pressure: 11 bar dimensions L x W x H: Ø 550 mm x H: 1,2m weight: ca. 60 kg For sale as shown and described, as an unpressurised tank for a sale at low price. Condensation drain valve at the bottom with hand lever 2 connection pieces 1/2 inch 2 connection pieces on the ceiling side 2 inch with blind plugs Boiler/tank Ø 450 x 1000mm upright on tripod stand Temperature max. +50°C / min. 10°C pressure gauge *

Condition: used, Compressed air receiver, air storage tank, pressure vessel KAESER Factory No. 481127K Year of manufacture: 2001 Tank capacity: 1000 litres Operating pressure: 11 bar - hot-dip galvanized pressure vessel - 3 connection fittings with 2" thread - 2 connection fittings with 1 1/2" thread - 3 connection fittings with 1/2" thread - 2 x small handholes for cleaning - 3 x ball valves - 1 x safety relief valve - pressure gauge - 2 lifting lugs on the top of the vessel Tank diameter: approx. 800 mm Nkjdpexpqzusfx Aaceu Total height: 2300 mm with stand (without attachments) Weight: 230 kg Good condition

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 649 kg, operating pressure: 8 bar, pressure (max.): 8 bar, compressed air connection: 8 bar, pressure: 8 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. Nkjdsr En S Depfx Aaceu The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 794 kg, operating pressure: 11 bar, pressure (max.): 11 bar, compressed air connection: 11 bar, pressure: 11 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. Nkjdpfxsr En Tao Aacju The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: new, Year of construction: 2024, functionality: fully functional, tank capacity: 5,000 l, total width: 1,310 mm, total height: 5,060 mm, overall weight: 944 kg, operating pressure: 14 bar, pressure (max.): 14 bar, compressed air connection: 14 bar, pressure: 14 bar, temperature: -20 °C, We manufacture the offered series pressure tanks in horizontal and vertical orientation in a wide range of pressure and volume according to the regulations of the Pressure Equipment Directive 2014/68/EU. The directive defines the requirements for pressure equipment for placing on the market within the European Economic Area (EEA). It applies to pressure equipment with a maximum pressure above 0.5 bar above atmospheric pressure. The PED Directive attaches great importance to product safety. The materials used in the construction of pressure equipment must meet strict quality standards in accordance with the directive. The design, production, testing and installation of pressure equipment must be carried out in such a way as to guarantee safety. The pressure tanks have many uses. Argon tanks are used, for example, for welding alloyed and non-alloyed steel and nitrogen tanks are used, for example, in the pharmaceutical, electronics, gas and oil industries. Compressed air tanks are used internally to store and limit pulsation and loss of air produced by compressors. The pressure tanks installed in compressor rooms are also used to cool down the compressed air and fulfill an auxiliary function in compressed air cleaning from water retention and condensate. In addition, the tanks increase the service life of the compressors by reducing the working time. The pressure equipment manufactured by us bears a CE mark and has complete documentation necessary for commissioning approval from the Office of Technical Inspection. Nodpfx Aor En Ttjacsku We design and manufacture pressure tanks for the wider industry. At every stage of cooperation - from the inquiry, through the design intention to the collection of the manufactured tank from the supervisory authority - we provide assistance from our team of engineers and inspectors of the notified body. We offer tanks designed to work with various media: Compressed air, oxygen, nitrogen, technical gas, water, bulk containers for the medical and chemical industry. We manufacture in horizontal and vertical orientation in a wide range of pressures and volumes in accordance with the provisions of the Pressure Equipment Directive 2014/68/EU. We have our own design office, which enables us to carry out individual and non-standard projects, for which it has the necessary competences and authorizations.

Condition: new, Year of construction: 2026, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Nkjdjxby D Aspfx Aacsu Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2026, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Nedpfsxbzalox Aacjku Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: good (used), Year of construction: 2019, machine/vehicle number: 223230, Offer 25279 Technical data: - Tank capacity: 2000 L - Operating pressure: 11 bar - Maintenance opening - Ball valves Nksdew Ekkwjpfx Aaceu - Pressure gauge - Space required: approx. W 1250 x H 2500 x D 1250 mm - Weight: approx. 450 kg

Condition: used, Compressed air tank 20,000 liters Manufacturer: OKS Volume: 20,000 liters Operating overpressure: + 11 Bar Test pressure: + 14.3 Bar Operating temperature: + 50°C Dimensions: Overall height: 7,010 mm Cylindrical height: 5,710 mm Diameter: 2,000 mm Inside the cylinder: 1 x manhole (320 x 420 mm) 3 x threaded sleeves 1" 1 x flange connection DN100 PN16 DIN 2633 In the top head: 1 x threaded sleeve 1" 2 x crane lugs In the bottom head: 1 x threaded sleeve 1" 4 x pipe feet Nsdpfx Aowrn N Reacsku Incl. complete technical pressure vessel documentation

Condition: used, Year of construction: 2003, Compressed air tank made of steel (galvanized) Technical dimensions / data: Available quantity: 1 Volume: 5000 liters Type of tank: pressure tank Outer diameter: 1400 mm Cylindrical height: 2870 mm Total height: 3710 mm Type of operating pressure: overpressure Operating pressure: 11 bar Operating temperature: -10 / +50 °C Equipment: Top: 2 x crane eyes 1 x ventilation Shell: Nodpjv Hmd Dsfx Aacsku 1 x manhole 2 x 2" socket 1 x 1 1/2" socket 2 x DN 80 flange socket Bottom: 3 x pipe feet 1 x 3/4" socket on the outlet For further equipment, see photos

Condition: new, Year of construction: 2023, overall weight: 244 kg, total height: 2,270 mm, pressure: 11 bar, new KAESER compressed air tank 1000 liters upright, galvanized 11 bar (incl. fitting set and pressure gauge set) Year of construction: 2023 High-quality compressed air tank in galvanized design. Galvanized inside and out in accordance with DIN EN ISO 1461 in an immersion bath. Connection piece for conical threads. Technical data: -Volume: 1000 liters -Overpressure max: 11 bar Nkodpfx Aaeqt A Iqecsu -Diameter: 800 mm -Tank height: 2265 mm -Weight: 244 kg -Compressed air inlet connection: 2 x G 1 1/2" -Compressed air outlet connection: 2 x G 2" -Safety valve connection: G 2" -Condensate drain connection: G 2" Tank acceptance: RL2014/68/EU Maintenance opening according to AD2000: 2 x hand hole Min. operating temperature: - 10°C Max. Max. operating temperature: + 50°C Surface coating: galvanized Convenient leasing possible for new machines via our house bank. Visit our retail store. We always have a large selection of new and used compressors in stock!

Condition: ready for operation (used), Air receiver, compressed air tank, pressurized air vessel, Used equipment Nodpfsxciqnex Aaceku Manufacturer: Magnet Model: KF 904 Overall dimensions: Width: 800 mm Depth: 800 mm Height: 2680 mm Weight: 1008 kg Year of manufacture: 2016 Operating pressure: 11 Bar Operating temperature: -20°C to +50°C Tank capacity: 1000 liters

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, pressure: 12.75 bar, machine/vehicle number: CAI709141, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Compressed air max.: 12.75 bar MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Compressor voltage: 400 V Compressor frequency: 50 Hz Connected load: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 2,400 mm Nksdsym Rqfjpfx Aaceu Weight: 500 kg External reference: Pieper – Lot 55

Condition: new, Year of construction: 2026, Set including the LUFT 1000 VSD+PM screw compressor, a vertical 1000-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 7.5 kW / 11 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 990 L/min Air delivery at 6 bar: 990 L/min Air delivery at 8 bar: 950 L/min Air delivery at 10 bar: 950 L/min Outlet connection (G): 3/4" Nedpfeyguy Dox Aaceku Dimensions: 900 × 620 × 820 mm Weight: 110 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 1000 L Vertical Tank – Technical Specifications Weight: 230 kg Number of connections: 6 Connection sizes: 2", 1/2" Overall dimensions: 230 × 80.8 cm Tank capacity: 1000 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 808 mm Height: 2300 mm Tank Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Nedpjyguq Aofx Aaceku Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: new, Year of construction: 2026, Complete Compressed Air Set: LUFT 1000 INVERTER Screw Compressor + 500L Vertical Air Receiver + IZBERG N10S Air Dryer This professional compressed air set includes: The LUFT 1000 INVERTER screw compressor (7.5 kW, direct drive, with frequency inverter), A 500-liter vertical air receiver with fittings, The IZBERG N10S refrigerated air dryer. This system is designed for industrial facilities, workshops, and all pneumatic applications that require reliable, efficient, and energy-saving compressed air solutions. The LUFT series by the Polish brand CORMAK represents the latest in pneumatic technology, combining innovation with high-quality materials and components. Low operating costs, user-friendly design, robust construction, and high performance ensure efficient and trouble-free operation even in demanding conditions. LUFT 1000 INVERTER Screw Compressor – Technical Specifications: Nsdpfx Aaoxa Ah Uocjku Motor Power 7.5 kW Voltage 400V / 50Hz Output at 0–6 bar 990 L/min Output at 6 bar 950 L/min Output at 8 bar 950 L/min Output at 10 bar 930 L/min Outlet Connection (G) 1/2" Dimensions (L x W x H) 810 x 610 x 850 mm Weight 160 kg IZBERG N10S Refrigerated Air Dryer – Technical Specifications: Parameter Value Inlet/Outlet Pipe Diameter (BSP) 1" Max Operating Pressure 10 bar Max Inlet Air Temperature ≤ 38°C Dew Point Temperature 3°C Flow Capacity 1500 L/min Power Consumption 0.58 kW Power Supply Voltage 230V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Refrigerant Type & Quantity R134a, 400 g 500L Vertical Air Receiver – Technical Specifications: Parameter Value Tank Capacity 500 liters Operating Pressure 11 bar Wall Thickness 4 mm Diameter Ø 600 mm Height 2098 mm Weight 145 kg Number of Connections 6 Connection Sizes 1¼", 2", ½" Dimensions (H x D) 209.8 x 60 cm

Condition: new, Year of construction: 2026, Set including LUFT 1500 Inverter Screw Compressor, 500L Vertical Air Receiver with Accessories, and IZBERG N20S Dryer The LUFT 1500 screw compressor with inverter, combined with a 500-liter vertical compressed air tank equipped with fittings and the IZBERG N20S dryer, represents a comprehensive, high-performance pneumatic solution. The LUFT series screw compressor by the Polish brand Cormak features state-of-the-art technology, top-quality materials, and reliable components. Its low operating costs, easy maintenance, ergonomic and robust construction, and high efficiency ensure dependable, trouble-free operation in demanding environments. Technical Specifications – LUFT 1500 with Inverter Motor Power: 11 kW Voltage: 400V / 50Hz Output at 0–6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet Connection (G): 1" Dimensions: 1170 × 730 × 1020 mm Weight: 243 kg Technical Specifications – IZBERG N20S Dryer Inlet/Outlet Pipe Diameter (BSP): 1" Maximum Operating Pressure: 10 bar Maximum Inlet Air Temperature: ≤ 38°C Dew Point Temperature: 3°C Capacity: 2800 L/min Power Consumption: 0.58 kW Power Supply: 230V Dimensions (L × W × H): 420 × 700 × 690 mm Weight: 37 kg Refrigerant Type and Quantity: R134a, 550 g Technical Specifications – 500L Vertical Air Receiver Tank Capacity: 500 liters Nodpfsxnyfmsx Aaceku Working Pressure: 11 bar Wall Thickness: 4 mm Diameter: Ø 600 mm Height: 2098 mm Weight: 145 kg Connections: 6 Connection Sizes: 1 1/4", 2", 1/2"