Used Conventional Grinding for sale (4,674)

Condition: excellent (used), Gockel G130PL x 5100mm Vertical Spindle Knife Grinder Manufacturer Gockel Model G130PL x 5100mm Year 1980 Condition Used Serial Number 5908 Stock Number 2602 Mag Chuck 800mm x 5100mm Pgjdoy N Amfjpfx Ag Tsn Segmental wheel 1000mm dia Wheel/Spindle Drive 185KW / 248hp Additional Features Year 1980 Travelling Wheelhead New Stones for Wheel Power rise and fall to wheelhead Auto down feed to wheelhead Marpos Sizing Coolant pump and separator

Condition: used, type S2-900 / 190 DKGM In our opinion, the machine is in good used condition and can be inspected under power by appointment. Pgodpfsx Ik Tkex Ag Tsn There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Pedpjxzuyrofx Ag Tegn Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, grinding diameter 250 mm grinding length 500 mm dimensions of grinding wheel 400 x 50 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Tailstock - Various accessories Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale! Pgodpfjxzuylex Ag Ten

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm Pgodpfxsxuv Udj Ag Tjn grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the Pgjdpewwl N Sofx Ag Ten scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: not inspected (used), functionality: unexamined, Two centerless cylindrical grinding machines are for sale. ----- 1* Manufacturer: NOMOCO, Type: M100 E Machine No.: 5069 Year of manufacture: 1977 Max. grinding diameter: 100 mm Pgjdpfx Aeyc N D Nog Tsn Max. grinding length: 180 mm Grinding wheels: Ø 400 mm Max. grinding wheel width: 180 mm Weight: 3,200 kg ----- Manufacturer: NOMOCO, Type: M100 Machine No.: 2338 Year of manufacture: 1974 Machine has a stack magazine, feed via a slide. Machine is set up for plunge grinding. Conversion to through-feed grinding is possible. ----- * The runout testing device is not included in the scope of delivery. The machine has been disconnected from the power supply, i.e. it cannot be demonstrated in operation. The removal and loading are the responsibility of the buyer. Prices for the machines can be found in the "Documents" section or by requesting them via email. A forklift for loading the machine is not available but can be arranged.

Condition: excellent (used), With DRO With internal grinding attachement Center height 240 mm Distance between centers 2500 mm Grinding wheel 700 x 200 x 305 Pgjdozhmfyspfx Ag Ton Grinding wheel speeds 890 / 1'120 rpm Workpiece spindle head 90° rotation Taper in tailstock MK5 Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Grinding range 650x450x325mm Table size 600x350mm Magnetic plate 600x400mm Size of grinding wheel diameter x width x bore 400 x 80 x 127 mm Grinding wheel speeds 1400 / 2800 rpm Misc. accessories Pgjdpfx Aszhl Rnog Ton MARCELS MASCHINEN CH

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Technical Details: Pjdsym Tuaspfx Ag Tsgn grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 773” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) Podpfx Ajxmakysg Togn - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: ready for operation (used), turning length 800 mm turning diameter over bed 330 mm turning diameter over slide rest 170 mm turning speed range 24 - 1900 U/min spindle bore 38.0 mm centre height 165 mm total power requirement 3.5 kW weight of the machine ca. 850 kg. dimensions of the machine ca. 1850 x 800 x 1700 mm from a vocational school - in good condition (!!) particularly suitable for medium-precision turned parts - in checked conditions - machinenvideo - ?v=GDoJ0Z7Dckw Pgsdpexmaktofx Ag Tsn Features: - Robust lead/feed screw lathe - HEIDENHAIN 3-axis digital display “VRZ 770” - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - TRIPAN steel holder with 3x inserts - Sliding tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - EMERGENCY stop button - Operating instructions

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Pgedjvvkipspfx Ag Ten

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Pgedpfx Aewhqprsg Tsn

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Pgsdpfx Ajwhqplog Ten

Condition: excellent (used), Year of construction: 1979, Kapp AST‑305B – Technical Specifications Machine type: automatic hob and gear cutter sharpening machine Year of manufacture: circa 1979 Machine function: resharpening of hobs, spiral or straight gash cutters; wet or dry grinding Maximum tool diameter capacity: 12 inches (300 mm) Maximum tool length between centers: 27 inches (700 mm) Maximum table traverse: 21.56 inches (550 mm) Maximum grinding wheel diameter: 12 inches (300 mm) Maximum center height: 6.1 inches (155 mm) Table speed (infinitely variable): – deep grinding: 30 to 1000 mm/min – surface grinding: 3 to 16 mm/min Flute lead angle range: 0° to 45° Flute lead range: selectable, up to 24‑inch to zero or 12‑inch to zero Grinding spindle speed: 2200 rpm (optional 1000–4000 rpm) Pedpfx Ajwwkt Ajg Tjgn Axial grinding spindle adjustment: 16.54 inches (420 mm) Vertical grinding head adjustment: 11.81 inches (300 mm) Spindle taper: Morse 4 or steep taper 40 Preselectable single in-feed: range 0 to 9999 (units) Machine dimensions: length 118 in × depth 82 in × height 93 in (≈3000 × 2080 × 2360 mm) Machine weight: approximately 7,500 lbs (3,000 kg) Control system: originally manual/analog, often upgraded with Allen‑Bradley PLC

Condition: new, Year of construction: 2024, width of the strips 75 mm band length 2000 mm band speed 37 m/min Pgsdpovcrnasfx Ag Ten total power requirement 3 kW weight of the machine ca. 0,084 t dimensions of the machine ca. 1x0,5x1 m New device

Condition: used, Year of construction: 2020, width of the strips 75 mm band length 2000 mm band speed 37 m/min total power requirement 3 kW Pgedpovblayjfx Ag Ten weight of the machine ca. 0,11 t dimensions of the machine ca. 1x0,5x1 m Demonstration unit, rarely used

Condition: ready for operation (used), Year of construction: 1988, Horizontal surface grinding machine Okamoto Type PSG 63 – UAN Pjdszg Tgnopfx Ag Tsgn Year of manufacture: 1988 Grinding length: 600 mm Grinding width: 320 mm Max. workpiece height: 500 mm Table travel (longitudinal): 750 mm Table travel (cross): 340 mm Grinding wheel diameter: 350 mm Grinding wheel width: 40 mm Spindle speed: 1500 rpm Rapid vertical feed: 400 mm/min Power: 3.7 kW Automatic feed Magnetic chuck Coolant system Weight: 2500 kg Price: EUR 2,000—plus VAT, ex location

Condition: used, Year of construction: 1989, band width 150 mm band length 3500 mm band speed 30 m/sec Scheiben-Ø 400 mm grinding feed 0 - 5 m/min work piece revolutions 0 - 140 U/min power capacity - workpiece power 2,2 kW grinding diameter 100 - 600 mm clamping length 6000 mm Podoyw Tkkopfx Ag Tjgn bed length ca. 8000 mm voltage 380 V / 50 Hz motor speeds: 1450 U/min power capacity 15 kW weight of the machine ca. 9,5 t dimensions of the machine ca. 8,6 x 2,6 x 2,5 m

Condition: used, drill diameter 1,5 - 25 mm lip angle 40 - 180 ° 6-jaw-chucks various equipment manual included Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling Pgsdpfx Aged Ih Sgs Ton various equipment (see pictures)

Year of construction: 1987, condition: used, grinding length max. 630 mm grinding width max. 200 mm workpiece height . mm x-axis max. 250 mm y-axis max. 710 mm distance spindle center to table max. 500 mm table surface area 0,25 mm table load max. 1,1 t table speed -stepless- 2 - 18 m/min cross feed autom. . dust exhaust 0,25 kW coolant pump 0,09 kW total power requirement ca. 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 2400 x 1600 x 1900 mm Pgsdpfjgbgawox Ag Ten Adjustments Y axis: 1 scale value = 0.005 mm Z axis: 1 scale value = 0.002 mm Manual adjustment (within the range of 250 mm of the Y axis): 80 mm Speeds: automatic cross feed Adjustment path in Y direction: - intermittent 0.2 - 20 mm per stroke; - continuous: 0 - 4 m/min Grinding wheel Ø max. 200 mm Grinding wheel bore: 51 mm Grinding wheel width: 20 mm Diamond dressing unit Digitaldisplay for 2 advertisement vertical infeed

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 11 cup wheels vertical glass edging machine condtion as new with only 39536 mtrs with variable angle : 0-45° glass thikness : 3 - 30 mm min. glass size : 65 x 65 mm ( till 12 mm glass) Psdpey D T Ayofx Ag Tjgn min. glass size with variable angle 45° : 150 x 150 mm max. arris width : 5 mm work height : 895 mm max. glass weight : 600 Kg / m machine sizes : L = 8385 x W : 1200 x H : 2900 mm weight : 4800 Kg Available : from stock .

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 146978, Knuth Surface Grinding Machine Flat HFS 2500C Working Area & Capacities Table dimensions: 250 x 500 mm Grinding area (max.): approx. 500 x 250 mm Maximum workpiece weight: 180 kg Distance spindle center to table surface: 450 mm Travel Distances & Feeds Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 275 mm Hydraulic table feed (X): 7 – 23 m/min Rapid traverse cross (Y): 990 mm/min Rapid traverse vertical (Z): 460 mm/min Spindle & Grinding Wheel Pgodoy H Dg Iopfx Ag Ten Grinding spindle motor power: 2.2 kW Grinding wheel dimensions: 200 x 20 x 31.75 mm Graduation: Y-axis 0.02 mm / Z-axis 0.005 mm Dimensions & Weight Machine dimensions (LxWxH): approx. 2650 x 2150 x 1675 mm Total weight: approx. 1800 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Centreless cylindrical grinding machine | Brand: TOS HOSTIVAR Model: BUB 50/2000 | Year of manufacture: 1989 The machine can be inspected by prior appointment under power. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS Machine working range: - Swivel diameter: 500 mm - Swivel diameter in open die: 10–140 mm - Diameter in closed centre: 10–130 mm Centre distance: 2.000 mm Workpiece headstock and tailstock: - Workpiece headstock, only towards the grinding headstock, swivels by: 90° (degree) - Chuck diameter: 200 mm - Taper in the workpiece spindle: MORSE 5 - Travel of the tailstock quill: 40 mm - Taper in tailstock quill: MORSE 5 - Front end of the workpiece spindle, size 5 - Cross-travel of tailstock centre: +0.1 - Tailstock clamping force: 0 – 4.000 N Grinding headstock: - Grinding headstock can be swivelled by: -15°, +45° (degree) - Adjustable via ball screw by: 310 mm - Total travel: 370 mm - Rapid traverse range of the headstock: 60 mm Grinding wheel: - Dimensions of the grinding wheel: 500 x 80 x 203 mm - Diameter of a partially worn grinding wheel: 380 mm - Max. width of the grinding wheel: 125 mm Machine table: - Min. table travel: 1 mm - Max. table travel: 2.200 mm - Table speed, infinitely variable: 0,05 - 5 m/rev - Table feed rate: 6 m/rev - Dressing speed: 0,05 - 5 m/rev - Table swivels through: +6° to -3° (degree) Dimensions / weight of workpiece: - Max. workpiece mass * when clamped between centres: 350 kg * when clamped in a free-hanging position, including clamping device: 60 kg Speeds: - Number of speed settings for the grinding spindle: 2 - Grinding spindle speeds: 1.720, 1.980 rpm - Peripheral speed of the grinding wheel: 45 m/rev/sec - Number of speed settings for the drive disc, with stepless ranges: 2 - Drive disc speeds: 18 - 112, 90 - 560 rpm Drive: - Total power requirement of the machine: 16 kVA Machine dimensions: - Machine footprint, including overhangs: * Length: 7.260 mm / Width: 2.570 mm - Machine weight with standard accessories: 6.5 tons A wide range of accessories is included in the sale. Pgedpfx Aezfqbmog Ton No guarantee is given as to the completeness or accuracy of the technical specifications and the equipment. - Subject to prior sale -