Used Conventional Lathe for sale (5,984)

Condition: good (used), Year of construction: 2005, Control: FANUC Series Oi-TC Max. turning diameter: 310 mm Max. part length: 520 mm Max. bar diameter: 65 mm Travel: X = 210, Y = 610 mm Turret with 12 stations All driven tools Spindle speed range: 60–4,200 rpm Without tailstock Iodpfx Agsww H T Eo Njbc Chip conveyor EMCO bar feeder

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVT50 GMRJA/04069, MACHINE SPECIFICATION Height of centres 195mm Swing over bed 400mm Swing over cross slide 246mm Swing in gap 585mm Width in front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 0-2500rpm Spindle nose mounting (Camlock) D1-6 Spindle bore 54mm Spindle motor 7.5kW Ibodpfxexldidj Ag Nsc Width over bedways 318mm Travel of cross slide 250mm Travel of top slide 130mm Travel of tailstock barrel 178mm Taper in tailstock barrel No. 5 MT Approx. Weight 1800kg Machine in Metric execution   MACHINE EQUIPPED WITH Newall 2 Axis Digital Readout System 3 Jaw Chuck Quick change Toolpost Ainjest high speed screwcutting attachment Chuck Guard Lighting Coolant System Rear Splashguard

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Iodpfx Agew Dcdyj Nobc Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: excellent (used), Second-hand wood lathe, Killinger KM 1000 S - Very good condition - Motor 0.75 kW / 230 V Center width 1000 mm and center height above the bench bed 200 mm Accessories: - Center punch - Turning iron (see photos) Iedpfxsr Eltcj Ag Nebc - steady rest - face plate - Tailstock - Hand rest - 8 speeds Location: From stock 54634 Bitburg - immediately available -

Condition: used, Labor E275 lathe equipped with a Fagor control system In good condition, available for inspection Includes 3-jaw chuck, rests, cooling, and books Turning diameter above the bed: 550 mm Turning diameter above the slide: 375 mm Ibodpfxexm Ugve Ag Njc Center length: 2000 mm Through diameter: 105 mm Spindle speed: 0-2500 rpm

Condition: excellent (used), Year of construction: 2005, turning length: 1,500 mm, CNC lathe STYLE - 510 x 1500 Revolver with Vdi 40 New software STYLE Version 2021? Closed housing 3 chuck 315 mm Under power DBC Turning Length: 1500mm Swing over bed Ø: 510mm Swing over cross slide Ø:300mm Spindle bore: 80mm Spindle power: 16kW Bed width: 330mm Tailstock spindle Ø: 75Ø Ibodsxlf Ihopfx Ag Njc Stroke pinole: 160mm Spindle taper: 5Mk Speeds / ranges: 2500Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 3700mm Width: 1800mm Height: 1800mm Weight: 3250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, operating hours: 2,651 h, functionality: fully functional, Rotatable diameter as Swiss-type lathe: 38 mm Rotatable diameter as conventional lathe: 42 mm Ibedpfsxnbc Hjx Ag Njc Guide system: JBS double cone Parts catcher included: for both short and long parts Turning length in a single pass: approx. 320 mm (simultaneous finish and roughing) Simultaneous machining: front and rear sides Control: Fanuc Series 31i-Model B In-process measurement: Blum probe Bar feeder: FMB LSK38, max. bar length extended to 3300 mm Oil mist extractor: UC1SD High-pressure system: available, 100 bar Lubricant: coolant Various accessories: guide channels, guide tubes, various tools, various double cone bushings

Condition: good (used), functionality: fully functional, Table dimensions: 1,000 × 320 mm Travel (X / Y / Z): 720 / 360 / 420 mm Spindle taper / mount: ISO 40 with hydraulic clamping Spindle speed: 45 – 2,240 rpm, 18 speeds Main motor power: 5.5 kW Total machine power: 8.0 kVA Machine weight: approx. 2,400 kg 3-axis digital readout Complete with equipment for horizontal milling as well Feed rates: 16 to 1,000 mm per minute Feeds and rapid traverse on all axes Dimensions (L × W × H): 1,900 × 2,100 × 2,000 mm Iodpfsxn T Unox Ag Nsbc Year of manufacture: 1995 Machine is delivered with various accessories – see photos for details. Note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend checking all relevant details. Financial information VAT/margin: Margin scheme: The displayed price includes VAT (VAT not deductible for businesses).

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control FANUC 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Ijdpfxjvzcple Ag Nebc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: good (used), Year of construction: 1987, Wood Lathe DHG 400/1000 Length: 1000 mm Motor power: 0.75 kW Voltage: 220 Volt 6 spindle speeds: 180/300/400/700/1400/2800 rpm Weight: 70 kg Iodpsw Hl Adefx Ag Njbc Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2005, functionality: unexamined, Miyano BND-51SY CNC lathe Serial no: 2WX85413 (02/2005) with Fanuc Series 18i-TB control Iemca Kid 70 bar feed Serial no: 0205120A01 (2005) Iedpfx Agew U U Iwe Nsbc

Condition: good (used), Year of construction: 2014, 1 used 1 CNC lathe Manufacturer Saeilo Contour Model ACE-15MC, Type LT-2XL500M, Year of manufacture 2014, with Sinumerik 828D BASIC T control Ibedpfovzkw Rex Ag Njc Technical data: Max. turning diameter 270 mm Max. turning length 425 mm Bar capacity 51 mm Spindle speed 5000 rpm Number of tool positions 12 Tool holder VDI 30 Main drive power 12/18 kW Travel paths X/Z axis 183/500 mm Dimensions LxWxH without chip conveyor 2600x2100x1800 mm Net machine weight approx. 4000 kg Equipment: driven tools C axis

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning length: 280 mm, turning diameter: 270 mm, spindle bore: 62 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 75 rpm, total height: 1,610 mm, total length: 1,520 mm, total width: 1,630 mm, swing diameter over cross slide: 350 mm, turning diameter over bed slide: 450 mm, overall weight: 2,800 kg, number of tool stations in tool turret 1: 12, Okuma LCS-15 OSP 700L CNC controller Ibedpfxexm T Dye Ag Nsc Machine its in very good condition, almost not been i use.

Condition: excellent (used), Year of construction: 2014, operating hours: 2,600 h, This excellent ST-10Y turning center is almost new condition due to minimal use since its purchase in 2014. Only approximately 2600 power ON hours. Viewing possible upon appointment. Immediately available for delivery. Isdpfxoxm Twmj Ag Nebc The addition of a Y-axis and live tooling allows for milling, drilling, and tapping for increased machine capabilities. Turning length 356 mm Maximum turning diameter 229 mm Chuck 165 mm Tool turret type VDI-40 Number of tool positions 12 Max spindle speed 6000 rpm Memory 750 MB Conveyor yes Including: Driven tools incl. C-axis drive Automatic lubrication system Cooling system Load Monitor 4 free M functions Rigid Tapping Transformer Main spindle orientation programmable M19 + P 165 mm chuck incl. soft jaw set Ethernet interface 1x Axial drive milling holder, ER-32 for the VDI turret 1x Radial drive milling holder, ER-32 for the VDI turret EZCAM Turn 3DQCRL42/5 Kitagawa collet assembly Automatic tool measuring system Fully programmable hydraulic tailstock Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Iodpfxovnwf Ij Ag Nsbc Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: new, Year of construction: 2025, OPTIturn TU 2004V - Lathe with infinitely variable speed control and digital speed display Ibodpfxecnxrco Ag Nec Picture shows OPTIturn TU 2004V Lathe with infinitely variable speed control and digital speed display Precise processing Heavily ribbed prismatic bed made of cast steel, inductively hardened and precision ground Hardened and ground bed guideways Hardened spindle nose (DIN 6350) Guaranteed concentricity of the spindle nose better than 0.009 mm Automatic length/lead spindle drive With longitudinal, cross and top slide Right-/left-handed rotation switchable in the control panel Emergency-stop pushbutton Rotary chuck protection Thrust bearing Lead screw mounted in two sintered bearings Large thread cutting range due to change gear set Simple and fast speed change via V-belt Change gearbox EMV filter class B (use in private households) Equipment details: Digital speed display Easy to read digital speed display Chip protection on the top slide Quadruple steel holder rotatable Roll rolled trapezoidal threads Lead screw Tailstock Adjustable for taper turning Tailstock quill and handwheel with adjustable fine scaling 0.02 mm Main spindle Hardened and mounted in adjustable precision taper roller bearings Tapered roller bearings in P5 quality Cylindrical centering seat Hardened spindle nose with Ø 21 mm spindle bore Lathe chuck Concentricity better than 0,04 mm Scope of delivery: Three-jaw chuck Ø 100 mm centric clamping

Condition: ready for operation (used), spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Harrison M450 Centre Lathe 60" Between Centres Spindle Speeds 40-2000rpm 12" 4 Jaw Chuck 10" 3 Jaw Chuck Fixed Steady Travelling Steady Ijdpfexdt Uyox Ag Nsbc Coolant P{ump & System

Condition: ready for operation (used), total height: 3,600 mm, empty load weight: 22,000 kg, Schiess Ø 2070 x H 1330 mm Chuck dia.: Ø 1700 mm Max turningdia -- passage: Ø 2070 mm - H 1330 mm Power on the spindle: 30 kW Max hight of workpiece Z-axis: 1330 mm (Z: 1000mm) Ijdpfx Ajxgv R Nsg Nebc Number of speeds: 1.7 -> 53 rpm

Condition: new, Year of construction: 2024, functionality: fully functional, spindle bore: 45 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, center width: 1,000 mm, quill stroke: 120 mm, quill diameter: 50 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 35 rpm, bed width: 250 mm, - Demonstration machine - Ijdpfswrndzjx Ag Njbc - Handwheel on the left of the support - with 3-axis digital display FAGOR INNOVA30iT (Art. No. 103877) * For more information on the exact standard equipment and available options, visit us online or call us directly *

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Ibedpfx Agevnwfze Njc Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: good (used), Wood lathe Length: 1750 mm Motor power: 3 KW Voltage: 380 Volt Ibjdpsi Akv Ssfx Ag Nec Location: ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), functionality: fully functional, Ward 2DB Capstan lathe With Air Chuck Isdpfx Agew Id Nkj Njbc Various Tooling As Pictured

Condition: ready for operation (used), chuck outer diameter: 2,000 mm, empty load weight: 35,000 kg, Rafamet KCF 200 verticale draaibank De Rafamet is een robuuste draaibank met de volgende capaciteiten: * max. afmetingen werkstuk: - Hoogte: 1.690 mm - Ø werkstuk: 2.400 mm Dit type machine is ideaal voor ombouw naar CNC! Max turningdia -- passage: 2.400 mm Iedpjxgv R Aofx Ag Nsbc Power on the spindle: 55 kW Max hight of workpiece Z-axis: 1.690 mm (Z= 1.000 mm) Digital screen: Yes

Condition: excellent (used), Year of construction: 2001, Optimum D 1340 GDE year 2001, top condition - as a training machine - Turning diameter over bed 330 mm Turning diameter over support Ijdpevutyhofx Ag Njbc 160 mm Turning length 800 mm Total power requirement 2 kW Machine weight approx. 400 kg Space requirement approx. 2000x1000x1600 mm Bar diameter 38 mm Speed range 70 - 2000 rpm Spindle nose Feed range 0.025 - 2.553 mm/rev Suitable for threads: Metric 0.25 - 11 mm Suitable for threads: Inch 4 - 112 Gg/" Tailstock: MK 3 Control Conventional 3-jaw chuck Location: from stock 54634 Bitburg - available at short notice -

Condition: ready for operation (used), chuck outer diameter: 1,620 mm, total height: 4,650 mm, empty load weight: 20,000 kg, + zijsteun Elektrisch vernieuwd in 2007!!! Max turningdia -- passage: 1700 mm Power on the spindle: 37 kW Max hight of workpiece Z-axis: 1290 mm Digital screen: Heidenhain 2 axes Number of speeds: 3,5 - 150 rpm Long: 4550 mm Ibsdpfxoxgv Rcs Ag Noc Wide: 2670 mm