Used Cr Electronic Plasma for sale (10,896)

Condition: ready for operation (used), OPTIM Electronics Microdac B1 type: BW2 , serial no. according to photo, used, normal signs of wear, 100% functional, scope of delivery according to photos Bcsdpfx Aei Ecb Eobpju

Condition: used, machine/vehicle number: 1980 100 175, Max. volume flow: 220 m³/h Bedjb Nv S Sepfx Abpjcu Pressure max. 22000 Pa electr. connection: 230 V weight: 16,5 kg Space requirement: 720 x 320 x 410 mm

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. Bcsdpfxsxu H I Uj Abpsu The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Year of construction: 2000, condition: ready for operation (used), A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Bodpjxghn Tjfx Abpecu

Condition: as good as new (ex-display), Reliable transmission of machine data, process parameters and diagnostic data to the controller For the connection of up to eight IO-Link devices Two Ethernet ports with integrated switch Integrated web server for configuration and diagnostics Simultaneous data exchange with the control and the IT world Bedsh N U Suepfx Abpscu Technical data: Application area Application I/O modules for use in the control cabinet Electrical data Operating voltage [V] 18...30 DC Nominal voltage DC [V] 24 Max. Power consumption [VA] 2.4 Total current carrying capacity [A] 2 Inputs/outputs Total number of inputs and outputs 20 Number of inputs and outputs Number of digital inputs: 18 Number of digital outputs: 10 Inputs Number of digital inputs 18; (8 x 2 + 2 x 1) Input wiring digital inputs PNP Power supply [V] 24 Max. Current carrying capacity inputs total [mA] 1600 Input current limit [mA] 200 Short circuit protection digital inputs yes Short-circuit protection digital inputs yes Overload resistance digital inputs yes Outputs Number of digital outputs 10 Circuit PNP Current carrying capacity per output [mA] 200 Short circuit protection yes Galvanically decoupled no Actuator supply of the outputs 24 V DC Interfaces Communication interface IO-Link Ethernet Transmission rate 10; 100 Protocol EtherNet/IP; Modbus TCP IO-Link master Transmission type COM1 (4.8 kBaud); COM2 (38.4 kBaud); COM3 (230.4 kBaud) IO-Link revision 1.1 SDCI standard IEC 61131-9 Number of ports Class A 8 Environmental conditions Ambient temperature [°C] 0...70 Storage temperature [°C] -20...70 Max. permissible relative humidity [%] 95 Protection class IP 20 Approvals / tests Shock/vibration stress EN60068-2-6; EN60068-2-27 Mechanical data Weight [g] 404,5 Dimensions [mm] 105.3 x 45.2 x 113.6 Materials Housing: PA Displays / Controls Display Switching status LED, yellow Operation LED, green Error LED, red Function LED, yellow Remarks Packaging unit 1 piece Electrical connection Screw terminals: ; Grid dimension: 20 mm

Condition: used, Year of construction: 2017, Plasma cutting machine from 2017, little used, made in Turkey. Fully operational. Currently selected. Technical Parameters Table surface: 2 500x 12000 mm Plasma generator: AJAN PP 260 (Precision Plasma 260 A ) Machine bridges: 1 PCS Plasma burner: Ajan (1 pc.): Gas burner: AJAN (1 pc.) + with optical ignition CNC systems: CNC control, Linux Standart equipment Ventilated width of the work table: 2500 mm Ventilated length of the work table: 12000 mm Maximum size of the sheet: 2500 x 12000 mm Quantity of bridges: 1 unit. Plasma system: PP 260 Ajan Current: 30A, 80A, 130A, 260A Cutting Ability (low-carbon steel): 32 mm Cutting Capacity (stainless metals): 20 mm Maximum piercing of holes: 40 mm Max. Cutting ability (cut from edge): 100 mm Max. Cutting capacity of the gas head: 150 mm Maximum cutting speed (theoretical): ~ Almm/min (actual speed depends on the material, brand and thickness of the piece) Positioning max: 15 m/min Re- positioning max: +/-0.01 mm Taper angle in accordance with ISO 9013 standard "range 3′ Gases for cutting: 02, N2, F5, H35 Protection: compressed air Ventilation of the table: mechanical valve Filtering: JET filter AJF Functions - a bridge controlled by two 2-way servomotors of the AC type - automatic ignition of the gas burner - automatic gas control (for plasma and gas cutting) - automatic burner height control (plasma) THC - the function of "ohmic control" - function "ARC control" - function "Microjoint" - function marking with a plasma head Control - programmable possibilities with DIN/ISO codes - Ability to work with DXF, ESSI, and NC toolpath files - Ventilator and generator for remote start and remote control with CNC - AJAN-CAD - AJAN-i own control - AJANCAM V 7.0 - AJAN-i own software The start package Include: 20 electrodes, 20 nozzles, 20 nozzle covers, 2 gas rings, 2 nozzle rings and coolant required to start the machine. AJAN-i CNC LINUX NEW from 2017! AJAN CNC based on the LINUX operating system "Allinclusive" Control Panel - Free AJAN-CAD V 7.0 - Free software updates - Geometric Shape Catalog Automatic restart if stopped (power) - Possibility of programming DIN / ISO G codes - Ability to work in DXF, ESSI trajectories and NC files - Wide selection, tuning and recording of the program - Automatic selection of material and parameters (customize) AJANCAM v 7.0 AJANCamv7.0 was developed by its own software configuration, which has the following features: - Easy to use, fast and efficient - Automatic errors, provisioning - Ability to write a text - its own directory (libary) - Automatic or manual placement - Cutting sequential modelling - According to the automatic layout of DXF and G-codes ESSI making Bodsrf S Tbopfx Abpocu The total ared: 384 m2 Filtration elements: 16 Elements of Noise filter: 85 dBA Ventilation Fan power: 11kW Feature blow dry with compressed air If you have more questions, welcome.

Condition: reconditioned (used), We have a large stock of electronic cards for injection molding machines. All our spare parts are tested in our facilities. Bedpfx Aofwcu Ujbpscu

Condition: new, Year of construction: 2024, NEW PLASMA CUTTER 3,000 x 1,500 GENERATOR 120 A Plasma Cutting NEW . Bcjdpfx Astu E Dujbpou Complete with CAD CAM softwere. DWG and DXF data transfer via USB and network card. CE mark. ISO 9001, GB/T 19001. 120 A generator. The cost of production is ridiculous only 5.5 kW and compressed air!!!

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. maximum thickness galvanized 0.8 mm. stainless steel 0.6 mm. straightening haul 5 shafts punching 5 units longitudinal edging cutting rolling touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100. Bsdsv Stfrepfx Abpjcu

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, overall weight: 8,000 kg, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, controller model: Vision 52, TECHNICAL DETAILS Travel path X-axis: 6,000 mm Travel path Y-axis: 2,500 mm Processing thickness: 2 to 40 mm plasma, 150 mm oxy-fuel MACHINE DETAILS Control type: Vision 52 Resonator type: Precision Plasmarc 401 Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,400 x 2,500 mm Track: 8,000 x 4,500 mm Weight: 8,000 kg Transport packages: 1 Bsdpeyd Ikdofx Abpjcu EQUIPMENT Off-line software Libellula Documentation CE marking CE certificate Accessories and consumables

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/020 -Length: 7.0 m -Transport dimensions: Ø 560 x 170 mm Bedpfxex Einpe Abpecu -Weight: 10 kg

Condition: good (used), Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection , electronic modules, PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7 electronic module ET 200S -Electronics module: type 6ES7 138-4FR00-0AA0 -Terminal Module: TM-E30C46-A1 -Number: 8x module available -Price per piece Bodpfemdyfdex Abpjcu -Dimensions: 160/30/H80 mm -Weight: 0.2 kg/pc.

Condition: ready for operation (used), Year of construction: 2018, This KERF RUM 2500P plasma cutting machine was manufactured in 2018. It features a large cutting area of 15000mm x 2000mm and is equipped with two bridges, each with 275amp plasma. Full history from the manufacturer is available. Contact us for more information about this machine. Application Types Cutting Bcodpfxex Hbkqs Abpeu

Condition: used, Year of construction: 1996, Plasmacutter, Plasma Cutting Machine Manufacturer: SAF Type: Plasmatome 3 Control: Digisaf 2.5 Manufacturer plasma-source: SAF Type plasma-source: Nertajet HP120 Cutting-dimensions: 6000x2000mm Cutting-thickness: 35mm Incl. filter/extraction! Incl. documentation and peripherals Bodpfxew Dpi Ne Abpscu Machine dismantled for transport - Year: 1996 - Documentation available: No - CE certificate present: No - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2000 - Max. material thickness [mm]: 35 - Options: Extraction Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), PLC control, digital input -Manufacturer: Siemens, Simatic S7-200 EM 223 -Type: 6ES7 223-1BF00-0XA0 / 6ES7223-1BF00-0XA0 -Quantity: 1 module available -Dimensions: 105/80/H60 mm Bsdpfxsyc Rx Us Abpjcu -Weight: 0.2 kg

Condition: used, power converter / rectifier. Bcsdpfxjd Ihaxe Abpeu techn. details see photos.

Condition: used, power converter / rectifier. Bedpfx Aod Ihaysbpjcu techn. details see photos.

Year of construction: 2002, condition: used,

Condition: used,

Condition: good (used), Year of construction: 2010, functionality: fully functional, working range: 3,500 mm, sheet thickness (max.): 250 mm, sheet thickness steel (max.): 250 mm, input voltage: 230 V, cutting speed: 12,000 mm/min, Equipment: documentation/manual, Koike Maxigraph 3500 cutting machine with Burny Phantom control. This machine is suitable for oxy-fuel and plasma cutting. The machine is used but in good condition. Machine can be seen in operation. Year of manufacture: 2010 Please note, this offer includes only: - Gantry - Control unit - X, Y, and P motors - Lifter and Koike THC height control - Cables and hoses Excluding: - Cutting table - Extractor/filter - Hypertherm 260 plasma source - Warranty For questions, please email us. Bcodpoyc Ecnjfx Abpeu If you have any questions or require more information, feel free to send us a message or call us.

Condition: used, mileage: 126,825 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,430 mm, first registration: 09/2019, fuel tank capacity: 70 l, CO₂ emissions: 187 g/km, emission class: euro6, color: red, number of seats: 2, number of previous owners: 4, Year of construction: 2019, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Aug 2019 - Jun 2020 Cab: single Technical information Bcodpfxjydp Sps Abpju Torque: 330 Nm Number of cylinders: 4 Engine capacity: 2.143 cc Transmission: 6 gears, Manual gearbox Measures length/height: L3H1 Dimensions (LxBxH): 537 x 193 x 199 cm Weights Empty weight: 1.969 kg Carrying capacity: 831 kg GVW: 2.800 kg Interior Interior: black Consumption Average fuel consumption: 6,7 l/100km (42 MPG) Urban fuel consumption: 8,4 l/100km (34 MPG) Extra urban fuel consumption: 5,8 l/100km (49 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 09/2026 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: used, mileage: 125,086 km, power: 82 kW (111.49 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,100 mm, fuel: diesel, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, number of seats: 3, Year of construction: 2022, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, start-stop system, General information Number of doors: 5 Model range: Jan 2021 - Nov 2023 Cab: single Technical information Torque: 300 Nm Number of cylinders: 4 Engine capacity: 1.997 cc Acceleration (0-100 kph): 16,8 s Top speed: 165 km/h Empty weight: 1.862 kg length/height: L1H1 Interior Interior: black Consumption Average fuel consumption: 7 l/100km (40 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): New APK (MOT) upon delivery Bcodpsydp Sijfx Abpju Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm Bcodew En E Espfx Abpju open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Bcsdpfxox Nuf Ts Abpou Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Bjdpfox Nufmox Abpecu Air Piping: A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side