Used Crowning Creation for sale (1,009)

Condition: used, mileage: 20,514 km, power: 220 kW (299.12 HP), first registration: 05/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Like-new 18-ton Mercedes-Benz 1830 Actros truck with a loading crane and a 7.20 m long special platform body in a low-bed design, Hiab loading crane with 3 hydraulic extensions and remote control, additional 5th + 6th hydraulic control circuit, and only 125 operating hours, air-suspended front and rear axles, payload 7,580 kg, loading height approx. 1.19 m, air conditioning, automatic transmission, navigation system, GVWR 40 tons, trailer load 35 tons (technically possible). The truck has only 20,500 km on it, one owner, and more. Equipment: M-cab Classic-Space with rear window Wheelbase 5,550 mm Payload approx. 7,580 kg Weight variant 18.0 t (8.0/11.5) Unladen weight 10,420 kg Engine OM936 R6 7.7 l with 220 kW (299 hp) and 1200 Nm torque Engine Euro 6 D Drive 4x2 Loading crane Hiab X-HiDuo 092 B-3 with hydraulic 3-way extension Crane has only 125 operating hours! UVV-certified crane, next inspection in 04/2026 XS Drive remote control additional floor control Lifting capacity at approx. 3.10 m / 2,450 kg // 3.90 m / 1,840 kg // 5.50 m / 1,260 kg // 7.30 m / 900 kg // 9.20 m / 700 kg according to the manufacturer Possible crane extension with 1 mechanical extension up to 11.30 m at 580 kg for an additional charge 2-point outrigger support Rotary servo and gripper control with 5th + 6th hydraulic additional circuit Platform body dimensions: 7.20 m x 2.45 m x 0.55 m high Loading height in driving position approx. 1.19 m. Platform with split 0.55 m high aluminum side panels and folding Kinnegriprungs All-round lashing rail in the floor profile on the outside 2 large plastic toolboxes at the rear right and left Automatic transmission G 211-12/14.93-1.0 Mercedes-Benz PowerShift 3 Transmission oil cooler Predictive Powertrain Control Differential lock in rear axle Air-suspended front and rear axles Front axle 8.0 tons, rear axle crown wheel 440, hypoid 13.0 tons Axle ratio i = 3.583 Air conditioning Electronic braking system with ABS, ASR and ESP High Performance Engine Brake Active Brake Assist 5 Disc brakes on front and rear axles Lane Keeping Assist Turning Assistant Attention Assist Traffic Sign Assistant Navigation system Storage compartment in the cab Cruise control Trailer coupling Rockinger D40 with air pressure connections Permissible total weight 40,000 kg Trailer load with continuous braking system 22,000 kg Trailer load with continuous braking system 35,000 kg technically possible Trailer load with SDAH/ZANH 18,000 kg Multi-function steering wheel in leather design Work lights LED daytime running lights and taillights 290 liter aluminum tank Sun visor Comfort central locking system 2 air horns on the cab roof Electrically adjustable side mirrors and electric windows Driver's air-suspended comfort seat with velour seat covers German vehicle, one owner Top condition with only 20,500 km Like-new condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Bsdezahxgjpfx Al Aedh Internal vehicle number: 2603

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: M71311, functionality: fully functional, operating hours: 1,500 h, pressing force: 160 t, stroke length: 300 mm, operating speed: 110 mm/s, reverse speed: 10 mm/s, table width: 90 mm, table length: 3,060 mm, table height: 960 mm, distance table to ram: 590 mm, total length: 4,000 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 15,000 kg, year of last overhaul: 2026, Equipment: safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 160-3100 NS (160T - 3060 mm) Tooling system: WILA Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. Bdodpfoz Ibnysx Al Ajh - Servo-electric drive - Pressing force: 160 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in Y1 / Y2 / X / R / Z1 / Z2 axes - Back gauge controlled in 4 CNC axes - X / R / Z1 / Z2 - 2D graphic control - EC20 model - Light curtain - programmable - WILA tooling system - Hydraulic punch clamping and hydraulic die clamping - Lower table compensation - "CROWNING" - CNC controlled - Front supports - 2 pcs, 150 kg/pc, length 950 mm

Condition: used, mileage: 175,000 km, power: 130 kW (176.75 HP), first registration: 12/2020, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 6,800 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, We are very pleased that our offer has caught your interest and can already assure you that you will be able to purchase a high-quality and reasonably priced vehicle with a verifiable service history from our company! Flatbed with stake pocket positions Tail lift BÄR 1,500 KG NAVIGATION Air conditioning Rear axle with air suspension including raise/lower function Roof spoiler Differential lock Special features: Audio system: CD radio (Bluetooth, USB), battery 165 Ah, comfort cockpit, rear axle differential lock, aluminium air reservoirs, electric window lifters, tinted windscreen, urea tank (AdBlue): 35 l, LED light package, roof air deflector (adjustable, without base trim), reinforced engine brake, spare wheel, side-mounted spare wheel holder, acoustic reverse warning (external sound), tail lift switch, circuit breaker, cab seats: driver's seat with armrest, pneumatic driver's comfort swing seat, side window sunblind driver’s door, 12V / 15A socket in dashboard, Truck Data Center 6 (fleet management system), side underrun protection, multimedia device preparation, Truck Data Center (fleet management system) preparation Further equipment: Emission standard EURO 6, axle configuration: 4x2, front axle load 5.3 t, approach/front mirror, exhaust outlet towards vehicle centre, left electric adjustable exterior mirror, low pressure air unit, two-step entry, driver assistance system: Active Brake Assist, driver assistance system: lane keeping assist, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: leaf/air, front suspension 4.4 t, generator 100A, 6-speed gearbox - type: G 71-6, manual roof lift (steel), rear axle crown wheel 390, info display 10.4 cm with additional indicator, chassis/body: chassis, fuel tank: 120 l, light and rain sensor, heated air dryer, engine 5.1 l - 130 kW diesel (OM 934), engine compartment encapsulation, wheelbase 4760 mm, disc brakes front and rear axle, seat covers/upholstery: fabric, cab passenger seat: fixed single seat, rear mudguard splash protection, rear axle stabilizer, cab control type, tachograph/EC control unit, fixed rear underrun protection, front underrun protection, toll recording preparation, immobilizer, permitted gross weight 11.99 t GERMAN VEHICLE REGISTRATION / EXPORT SERVICE We organize your registration and export documents / EUR 1 and manufacturer’s statement for export. FINANCING Upon request, we are happy to offer you a LEASE-PURCHASE or FINANCING ARRANGEMENT. SERVICE Bdsdpfsvzd Uijx Al Aoh TÜV roadworthiness inspection / UVV lift gate check / LGS testing / tachograph inspection / OBU device installation and service by our AUTHORIZED WORKSHOP possible upon request. TOLL / ROAD CHARGES Toll booking available on site. TRAVEL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale is subject to our general terms and conditions. The information provided online is a non-binding description and does not constitute guaranteed specifications. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, mileage: 29,885 km, power: 290 kW (394.29 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,800 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Mtlg. house, suspension seat, electric mirror, heated mirror, electric window left, electric window right, air conditioning, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), constant throttle, differential lock, leaf air suspension, tow bar air + light, aluminum tank, under-body protection, roof hatch, crane behind house, emergency stop, grapple control, high stand, 2-point support hydraulic, 2x hydraulic. Extensions, green environmental badge Bedpfx Asv Sdh Rsl Ajdh Wheelbase: 4800 mm Structure: with used crane Palfinger PK 12001 L, 8.7m - 1.22t, high stand and used flatbed 4.5-5.5m long 7.5t front axle, rear axle crown gear 440 Hypoid 13t, electronic braking system with ABS and ASR, disc brakes with partial protection on front and rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front axle, front underrun protection made of aluminum, residual heat utilization, light sensor, comfort locking system, economy/power driving program, navigation system, multimedia cockpit, preparation for toll collection, daytime running lights, engine brake, ESP, lane keeping assistant, attention assistant, traffic sign assistant, Active Brake Assist. Frame length approx. 6350mm! Total length: 8500mm! Available with crane mounting behind the house or at the rear on request! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! - .

Condition: used, maximum load weight: 28,184 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space length: 9,800 mm, loading space width: 2,360 mm, loading space height: 2,300 mm, loading space volume: 52 m³, Year of construction: 2023, Equipment: ABS, Stock No. 5566 Schmitz Cargobull SKI SL 9.6 approx. 52m³ Steel Tipper Body – Accident Vehicle * Manufacturer: Schmitz Cargobull * Model: SKI SL 9.6 - Steel Tipper (Accident) * First Registration: 06/2023 * Color: Chassis Melon Yellow RAL 1028, Tipper Anthracite Grey RAL 7016 * Volume: approx. 52 m³ (9.80m length x 2.36m width x 2.30m height) * Gross Vehicle Weight: 36,000 kg * Unladen Weight (per registration): 7,816 kg * Payload: 28,184 kg * Axles: 3x SCB axles / 1st axle liftable / Disc brakes * Tyres: 385/65 R22.5 on steel rims * Suspension: Air suspension with raise and lower function * MOT (TÜV): valid until 06/2025 * ABS / EBS * Unladen fifth wheel height: 1,200 mm * Swing doors (50/50) with 2x grain chutes * Sloped front wall * Operator platform loose (damaged) * Aluminum support leg (full load – 1x missing) * Individual wheel arches * Foldable underrun protection * Additional reversing lights * First owner German vehicle!! German documents!! One owner only! Bsdpfx Aewh Hxpol Ajdh Note regarding possible errors in the listing: Despite careful creation of this advertisement, errors may be present in the text or specifications. We assume no liability for mistakes, alterations, or prior sale. All information is without guarantee. Please contact us to verify details or clarify further questions.

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Croatia, ClassicSpace, Mercedes PowerShift 3, Long cab, Air suspension seat, 1x bunk, Seat heating, Electric mirrors, Heated mirrors, Electric window left, Electric window right, Air conditioning, Sun visor, Cruise control, Navigation system, Electric sunroof, Auxiliary heater, Air horn, ABS (Anti-lock Braking System), Traction control (ASR), Retarder, Auxiliary drive, Differential lock, Fog lights, Work lights, Leaf spring suspension, Trailer coupling with air and electrical connections, Aluminum fuel tank, Underride protection, Hydraulic cross-locking, Roof hatch, Green environmental badge Wheelbase: 3600 mm, Body: HYVA T20-47-S roll-off system for containers up to 6m 8t, Front axle, Rear axle planetary 13.4t, Crown wheel 300, Hose rupture protection for braking system, Electronic braking system with ABS and ASR, Disc brakes with full protection on front and rear axles, ABS can be deactivated, Stabilizer bar front axle, Stabilizer bar reinforced on 2nd rear axle, Condensate monitoring for compressed air system, Electronic parking brake additionally on front axle, Secondary water retarder, Road paving package, Front underrun protection made of aluminum, Waste heat recovery, Smoker's package, Comfort bed (lower), Seat belt monitoring, LED ambient lighting, Hot water auxiliary heater, Additional thermal insulation, Sliding/lifting sunroof, electric glass version, Reversing warning, Illuminated Mercedes star, StreamSpace, Light and rain sensor, Comfort locking system, Driving program economy/power, Mercedes PowerShift 3, PowerShift Advanced, Pre-equipment for toll collection, Protection plate for fuel tank, Transmission oil cooler, Navigation system, Refrigerator, LED daytime running lights, High-performance engine brake, Air-conditioned driver's seat, Multimedia cockpit interactive, Safety pack, ESP, Lane keeping assist, Distance keeping assist, Traffic sign recognition, Active Brake Assist 5, Driver airbag, Meiller 7-piston pump type 275, Auxiliary drive MB 131-2c pump. Frame length approx. 4900mm Bjdszbc Irjpfx Al Asdh Frame height approx. 1130mm Location: Trgo-Auto d.o.o. Matoseva 86 0 Solin Hrvatska / Croatia / Kroatien ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: excellent (used), Stratasys Objet Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the creation of prototypes from three materials, as well as simulating overmolding or equipping build plates with selected models. Using the triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model materials: Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Bdodjzh Dqyepfx Al Aoh Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Tooling and fixtures Architectural models Medical models Injection molding molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the full model size (only for rigid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2002, Technical specifications: Retrofit in 2026 Working length: 4100 mm Distance between uprights: 3700 mm Press force: 220 tons CNC control: CD2000 (new) Color screen size: 14" Controlled axes: Y1/Y2; X; R Motorized adjustable back gauge Overhang: 300 mm Stroke: 200 mm Bdsdpfx Aljznl U Te Aeh Automatic crowning Motor power: 20 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17.5 tons Accessories: Segmented AMADA tools, new Lateral safety devices Condition: The machine is in very good overall condition Only approx. 7,500 operating hours The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, stroke length: 200 mm, controller manufacturer: Cybelec, bending force (max.): 160 t, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Used Bystronic Xact 160 EP 40-160 CNC Pressbrake For Sale Capacity: 4metre x 160ton With: Cybelec DNC 880S Control 4 Axis (Y1, Y2, X, R + Crowning) Safety Guards Fully Enclosed Rear Glass Doors Wandering Foot Pedal/Pedestal Stop Bdsdpfx Alox A E Rkj Ash Serviced with Bystronic UK With upper and lower tooling

Condition: used, mileage: 309,077 km, power: 110 kW (149.56 HP), first registration: 09/2003, fuel type: diesel, empty load weight: 4,495 kg, maximum load weight: 2,995 kg, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, cabin, trailer coupling, Vehicle location: Bovenden, Kz. Haus, 1x air seat, rear window, electric mirrors, radio, ABS (anti-lock braking system), auxiliary drive, leaf spring suspension, tow bar, air and light tow bar Bodev Iq Nmspfx Al Ajdh Wheelbase: 3020 mm Body: Meiller 3-way tipping body, bulkhead, 700 mm axle ratio i = 4.300 (HL2/4/6), front axle 3.5 t, rear axle H2 6.2/7.2 t, crown gear 325, disc brakes front and rear, rear stabilizer bar under frame, G 56-6/6.29-0.78 transmission, Meiller 6-piston type 265, NA MB 56-1c countershaft i = 0.56, rear spring 4.6 t parabolic, front spring 3.2 t parabolic. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .

Condition: used, mileage: 323,056 km, power: 315 kW (428.28 HP), first registration: 08/2016, fuel type: diesel, empty load weight: 14,207 kg, maximum load weight: 17,793 kg, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,550 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, hydraulics, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, Mtlg. House, 1x comfort seat, heated seats, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, rotating beacon, leaf springs, on-board system left, aluminum tank, 2 axles with pre-steering, roll tarpaulin, U-protection, chute, roof hatch, green environmental sticker Bsdpfsv Hpkgjx Al Aodh Wheelbase: 4550 mm Structure: Meiller 3 side tipping structure with roll tarpaulin & on-board system left front axle 7.5t, rear axle crown gear 233 planets 13.4t, electronic braking system with ABS and ASR, ABS can be switched off, disc brakes with full protection front and rear, condensate monitoring for compressed air system, stabilizer rear axle, road paver package, residual heat utilization, reversing alarm, construction site filter, ClassicSpace, off-road driving program, comfort locking system, Mercedes PowerShift 3, preparation for toll collection, daytime running lights, protective plate under bumper, transmission oil cooling, Meiller 9-piston pump type 296/54, NA MB 131-2c pump. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, mileage: 357,000 km, power: 290 kW (394.29 HP), first registration: 01/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 7,350 mm, loading space width: 2,470 mm, loading space height: 2,240 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, We're delighted that our offer has piqued your interest and can assure you that you'll be able to purchase a good, affordable vehicle with a proven service history from us! Certified KOKO swing-away body with rear load securing device Steering axle Engine brake Tow bar Forklift bracket Air conditioning Auxiliary heating Rear axle with air suspension and raising and lowering function Special equipment: Front axle load 8.0 t, Audio system: CD radio (Bluetooth), 220 Ah battery, compressed air connection in the cab, electrical system and lights for the swap body frame, Driver assistance system: Active Brake Assist, Suspension: 8.0 t front springs, 2-leaf, 3-piece fenders, Fuel tank: 500 L aluminum, Roof air deflector (lockable, without base panel), 2-cylinder air compressor, Reinforced engine brake, Steered trailing axle, Automatic circuit breaker, Seats in the cab: Driver's seat: Comfort suspension seat, 12V socket in the passenger footwell, 24V socket in the passenger footwell Additional auxiliary heating (water) Other features: Euro 6 emissions standard, 6x2 axle configuration, 2-wire trailer brake, left-hand connections, 24V/15-pin trailer socket, Antos, exhaust to the outside right, electric exterior mirrors. adjustable and heated, rear axle differential lock, steel compressed air tank, medium compressed air unit, driver assistance system: lane departure warning, cab: width 2.30 m, cab: hydraulic tilting device, cab: M ClassicSpace, cab: steel-sprung, standard, cab floor with engine tunnel 320 mm, suspension: leaf / air, electric windows, tinted windshield, 100 A generator, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 Ltr., manual lifting roof (steel), rear axle crown gear 440, info display 10.4 cm, body/structure: chassis, comfort locking system, fuel tank: 290 Ltr. aluminum, unregulated power steering pump, air intake from the front, engine 10.7 Ltr. - 290 kW R6 Diesel (OM 470), Enclosed engine compartment, single-tire trailing axle, 4900 mm wheelbase, ramp mirror, spare wheel, residual heat recovery, disc brakes on front and rear axles, fabric seat upholstery, cab seats: passenger seat, front splash guard, front axle stabilizer, additional stabilizer, rear axle/trailing axle, 24V cab socket, tachograph/EC control unit, aerodynamically shaped underbody paneling, front underride protection, toll collection preparation, offset front axle, regulated water pump, gross vehicle weight 25.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer's declaration for export. FINANCING We would be happy to provide you with a LEASING, HIRE PURCHASE or FINANCING offer upon request. Bdsdpfx Alsumgtus Aoh SERVICE TÜV-HU / UVV LBW / LGS INSPECTION / Odometer inspection / OBU device installation and service by our brand-name workshop on site TOLL / ROAD TOLS TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale subject to our terms and conditions. The information provided online is a non-binding description. It does not constitute guaranteed properties. The seller is not liable for typos or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale - must go due to cessation of activities Different separate spare parts available, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts Bsdpfed S E Itox Al Aedh €9.500 per Gildemeister

Condition: used, mileage: 299,900 km, power: 175 kW (237.93 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 8,650 kg, maximum load weight: 3,340 kg, overall weight: 11,990 kg, tire size: 265/70R19.5, axle configuration: 4x2, wheelbase: 4,760 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,040 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 6,200 mm, loading space width: 2,540 mm, loading space height: 1 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, registration house, 1x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, Telligent automatic gearshift, ABS (anti-lock braking system), traction control system (ASR), power take-off, front exhaust, differential lock, fog lights, leaf-air suspension, air+light trailer hitch, G1 noise reduction system, side aluminum bumpers, roof hatch, crane at rear, emergency stop, folding, 2-point support hyd. Aluminum side guards, pendulum flaps, roof hatch, crane at rear, emergency stop, foldable, 2-point hydraulic outriggers, 1x hydr. extension, green environmental sticker Wheelbase: 4760 mm Body: Hegla glass transport body with side racking, rear crane for an extra charge of EUR 10,000-17,000, e.g. Fassi F95A21 EEV engine, 5.3t front axle, rear axle H4 11t crown wheel 390mm, ABS, disc brakes on front and rear axle, rear axle stabilizer, front underride guard, configurable special module (PSM), pre-installation for toll collection, distributor cockpit, Telligent automatic gearshift, pollen filter, automatic daytime running lights, reversing alarm, on-board diagnostics 2, engine brake with constant throttle, transmission lock for auxiliary drive, tank capacity: 180l + 100l, power take-off MB 60-2c MPA low position with N speed. Load diagram: 2.0m=4420kg, 4.1m=2210kg, 5.9m=1545kg, (3 x mechanical extensions can be retrofitted for an extra charge, then up to 12.0m=570kg)! The existing defective crane will be replaced by a Fassi F95A21. The crane can be exchanged for another crane on request! Radio control can be retrofitted for an extra charge! KM status: 305,465! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bdedpfx Ajvhhv Djl Aeh

Condition: used, mileage: 76,449 km, power: 175 kW (237.93 HP), first registration: 06/2020, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, color: orange, gearing type: automatic, emission class: euro6, total length: 7,300 mm, total width: 2,450 mm, total height: 3,550 mm, Equipment: ABS, electronic stability program (ESP), * Special equipment: combined HD flushing and suction unit, type ZSA6500K * Steel tank, 6500 L, including water chamber 2500 L * Vacuum pump RFW150 Wittig, 1427 m³/h * High-pressure pump Pratissoli KF36A, 160 bar, 122 l/min, 873 m³/h * Suction hose cassette DN100, telescopic and pivoting * HD hose reel with 120 m DN19 and 40 m DN13 Bjdpozxai Hjfx Al Ajdh * Remote control, wireless and cable * Meter counter * Winch * Stainless steel storage box * Rear traffic warning light system * Hydraulic tailgate * Hydraulic tipping device for tank * Hydraulic pivoting hose reel * Rotating beacon at the rear and in the cab * Axle load, front axle: 6.1 t * Trailer coupling: towing hitch * Exhaust pipe raised behind the cab * Battery 165 Ah * Suspension: front springs 6.1 t * Electric window lifts * Gearbox: 8-speed - type: G 140-8 * Power Shift * Gearbox lock for auxiliary drive * LED light package * Vehicle outline lights, LED * White side turn signals * Heated air dryer * Enhanced engine brake * Enhanced engine compartment encapsulation * Auxiliary drive MB 121-2c * Parameterizable special module * Rotating beacon, left/right * Rear crossmember for trailer coupling * Circuit breaker * Seats in the cab: driver's seat with armrest * External sun visor * Sun protection roller blind, side window, driver's door * Reinforced rear axle stabilizer (for extremely high loads) * Steel rims 7.50x22.5 * Preparation for additional turn signals * Oil cooler for gearbox Additional equipment: * Emissions standard EURO 6D * Axle configuration: 4x2 * Approach/front mirrors * Exterior mirrors, electrically adjustable, left * Cockpit Classic * Differential lock, rear axle * Two-step entry * Cab: S ClassicSpace * Cab variant: ClassicSpace * Suspension: leaf/leaf * Suspension: rear springs 10.5 t * Generator 100 A * Urea tank (AdBlue): 25 L * Manually operated lifting roof (steel) * Rear axle, crown wheel 390 * Hydraulic pump (Meiller pump - 5 pistons - 255 / 1) * Info display 10.4 cm with additional display * Fuel tank: 120 L * Engine 7.7 L - 175 kW R6 diesel (OM 936) * Wheelbase 3260 mm * Rear window * Seat cover/upholstery: fabric, seats in the cab: passenger single seat, fixed * Seats in the cab: driver's seat, standard sprung seat * Splash guard, rear fender * Tachograph / EG control unit * Fixed rear underrun protection * Front underrun protection * Preparation for toll collection * Immobilizer * Permissible total weight 16.00 t * Rear view camera * and more * Errors, changes and prior sale reserved

Condition: used, Year of construction: 1987, Labelling machine for applying neck, body and back labels to glass bottles. Additional title: with two glue aggregates Nominal capacity of filler: 15000 b/h Bedpsztyy Ijfx Al Aedh Formats: breast-, body-, back-label / crown cap: 0,5 l-NRW-bottles, 0,33 l-Longneck-bottles / screw cap: 0,5 l-NRW-bottles Running direction: left -> right Features: 2 glue aggregates

Condition: used, functionality: fully functional, mileage: 170,969 km, power: 175 kW (237.93 HP), first registration: 06/2015, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 4,760 mm, next inspection (TÜV): 02/2026, color: white, gearing type: mechanical, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 2,500 mm, Year of construction: 2015, Equipment: ABS, air conditioning, cruise control, onboard computer, soot filter, tail-lift, traction control, trailer coupling, Special equipment: - Air conditioning - Trailer brake, 2-line system - Trailer coupling: central axle trailer G 145 - Trailer socket 12V / 13-pin - Trailer socket 24V / 15-pin - Audio system: CD radio - Battery 165 Ah - Electric window lifters - Generator 100 A - Transmission - mechanical shift - Fuel tank: 180 liters, plastic - Frame extension (rear overhang) - Acoustic reversing alarm (external warning signal) - Tail lift switch - Sliding tarpaulin - Rear cross member for trailer coupling (central axle trailer) - Cab seats: driver's comfort suspension seat - 24V socket in cab Bedpfowf Ei Iox Al Ajdh - Side underrun protection - Tachograph preparation (toll recording) Additional features: - Emission standard EURO 6 - Axle configuration: 4x2 - Start-up/front mirror - Exhaust outlet towards vehicle center - Left exterior mirror electrically adjustable - Classic cockpit - Air reservoir: steel - Two-step entry - Suspension: leaf/leaf - Rear suspension: 10.5 t - Front suspension: 5.7 t - 6-speed transmission - type: G 90-6 - Urea tank (AdBlue): 25 liters - Roof hatch, manual (steel) - Rear axle crown wheel 390 - 10.4 cm info display with additional indicator - Body type/chassis: bare chassis - Engine 7.7 liters - 175 kW inline 6-cylinder diesel (OM 936) - Engine brake - Engine compartment encapsulation - Wheelbase 4760 mm - Disc brakes front and rear axle - Seat cover/upholstery: fabric - Cab seats: fixed single passenger seat - Rear mudguard (splash protection) - Control type: driver's cab - Tachograph / EC control device - Automatic daytime running lights - Fixed rear underrun protection - Front underrun protection - Immobilizer - Permissible gross weight 15.00 t - New TÜV (inspection) Sale to dealers, traders and export only. * The information provided here is non-binding and does not constitute guaranteed characteristics. The seller accepts no liability for input errors, data transmission errors or mistakes. Subject to change and prior sale.

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 7,700 mm, construction height: 3,050 mm, operating hours: 2,089 h, fuel type: electric, mast type: triplex, Manufacturer + model: CROWN SP 3522 - 1.0 Bdjdpozut Syjfx Al Ajh Mast: 3F7700 ID: 23033.2653 Category: Used Mast type: 3F Lowered height: 3050 mm Lifting height: 7700 mm Capacity: 1000 kg Platform height: 7000 mm Picking height: 8600 mm Cabin width: 1370 mm Year: 2015 Hours: 2089 hours Capacity: 24 V / 775 Ah - Hoppecke Options: FULL options - Mast = Triplex FFL - Equipped with side guidance & sensors (INCLUDING side roll / wheels & sensors!!)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 6 axes Y1 - Y2 - X - R - Z1 - Z2 Electromechanical follower pair Bdedpex Sru Dsfx Al Ajh Pneumatic punch and die clamping Pneumatic bending and pressing unit Intermediate pieces H = 200 Angle reader ACTIVE hydraulic crowning

Year of construction: 1997, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING Bjdpfx Aszz Tykol Aedh AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm TONNAGE: 150 ton THROAT DEPTH: 400 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm UPPER BEAM TRAVEL: 415 mm MOTOR POWER: 15 kW CONTROL UNIT: CYBELEC DNC 900 WEIGHT: 12800 Kg OVERALL DIMENSIONS: 4000 x 2400 x 3200 mm ACCESSORIES: HYDRAULIC TOOL LOCKING ; HYDRAULIC CROWNING

Year of construction: 2021, condition: used, functionality: fully functional, This is the latest generation of the VarioCooking Center, the iVario Pro L, model year 2021, from the premium manufacturer Rational (successor to the VCC 211). !!! Price upon request !!! Our in-house workshop has performed a fresh inspection, and the iVario L is in top condition. The offer does not include any accessories, but these can be purchased for an additional charge. The list price for this unit is €20,340 net = €24,204.6 gross. You will receive an invoice with VAT shown. Service: We will be happy to help you find a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational equipment type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all equipment types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Checked & fully functional - or your money back. Flexible options for shipping or self-collection. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1030 x 894 x 1078 mm Power connection: V: 400 / kW: 27.3 / Hz: 50 Year of manufacture: 2021 Serial number: E21VK21108058335 Capacity: 100 liters Weight: 216 kg Condition: Used, inspected, fully functional. Special features: iCookingSuite - intelligent cooking assistant with the 6 operating modes: meat, fish, vegetables and side dishes, egg dishes, milk and sweet dishes, soups and sauces, or the 5 cooking methods: boiling, frying, deep-frying, braising, and finishing. iZoneControl: flexible division of the pot base into zones with different temperatures. Low-temperature cooking (also overnight), confit, sous-vide cooking. Vario Cooking Control mode: the desired result of the product is selected with a finger tap, e.g. from light to dark. Vario Boost: patented heating system for absolutely even and precise temperature transfer. Programming mode: creation of manual programs and management of cooking processes. Integrated Wi-Fi interface, e.g. for connection to ConnectedCooking. Shipping: Delivery or self-collection by arrangement. Bodpfxjzrfbhj Al Asdh Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sales are only made in accordance with our general terms and conditions (GTC).

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Bsdpfxsuf Nr Ae Al Aodh Clear gap between frames 2555 mm Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Bdsdpfjyinu Hex Al Aoh Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Condition: new, Year of construction: 2025, neu 2025 080091 prompt, Zwischenverkauf v Türkei 51120 € 781.19 € 1 40900 € 60 to 2550 mm Y1 / Y2 und X Achse 160 mm 2150 mm 250 mm 350 mm hydraulisch 120 mm/s 9 mm/s 70 mm/s 620 (mit optionaler R-Ach mm 250 mm/s 813 mm 104 mm 100 l 5.5 kW 3250 mm 1200 mm 2350 mm 4250 kg Special price for demo machine Like-new condition 3 axes (Y1, Y2, and X axis) CNC control DT-10 - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB CNC controlled back gauge with linear guide and ball screw spindles CNC controlled crowning table intermediate clamps for upper tool Bodjwva Igspfx Al Aodh upper tool1010/A/75°/0,8, sectioned,bending radius hardened and ground die holder for 60 mm dies die type2009/85°(V 16, 22, 35, 50 mm)sectioned, geteilt, bending radiihardened and ground laser safety device Fiessler AKASmounted on the upper beam sheet support arms protection covers on the sides andback side according to CE rules oilfilling users manual in GERMAN orENGLISH (sample photo shows mod. PBF 30200) OPTIONS: CNC controlled R-axis (adjustment range in X = 500 mm) DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) WE HAVE MORE THAN 600 REFERENCES!

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, operating speed: 80 mm/s, oil tank capacity: 200 l, total length: 3,300 mm, total width: 1,800 mm, total height: 2,700 mm, overall weight: 11,400 kg, feed length X-axis: 600 mm, feed length Y-axis: 200 mm, spindle motor power: 15,000 W, product height (max.): 480 mm, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 200×3200 – 200 T – MTP-3212 – 4 AXES Y1, Y2, X + V The brand-new MTP 200×3200 Hydraulic CNC Press Brake has been designed for precision bending of carbon steel, stainless steel, and aluminum sheets up to 8 mm thick. Thanks to its advanced CNC control system, heavy-duty welded frame, and premium-quality components, the machine is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, and engineering companies. The machine is equipped with the MTP-3212 CNC controller and 4 controlled axes (Y1, Y2, X + V), ensuring exceptional accuracy, repeatability, and fast production setup. STANDARD EQUIPMENT • MTP-3212 CNC controller with a large full-color touchscreen • Independently servo-driven Y1 and Y2 axes • Servo-driven X-axis (back gauge) • Automatic crowning compensation (V-axis) • AMADA-type quick tool clamping system • 2 adjustable front support arms • Mobile control panel mounted on a swing arm • LED working area illumination The CNC controller automatically calculates bending parameters, features an intuitive user interface, and can store up to 40 tool configurations, significantly reducing setup time. PREMIUM COMPONENTS The press brake is equipped with high-quality components from internationally recognized manufacturers: • Bosch Rexroth hydraulic system • Schneider Electric electrical components • Omron and Schneider Electric safety components • Heavy-duty steel hydraulic tubing for maximum durability and leak prevention ERGONOMICS & SAFETY Designed for maximum operator comfort and safety, the machine is equipped with: • Safety light curtains • Side safety guards • Rear safety fence • Easily accessible emergency stop switches • CE Declaration of Conformity • Operating manual TECHNICAL SPECIFICATIONS • Maximum sheet thickness: up to 8 mm • Pressing force: 200 T • Maximum bending length: 3200 mm • Distance between columns: 2700 mm • Throat depth: 320 mm • Ram stroke: 200 mm • Maximum opening height: 480 mm • Back gauge travel (X-axis): 600 mm • Controlled axes: Y1, Y2, X + V • Main motor power: 15 kW • Power supply: 400 V / 50 Hz • Machine dimensions (L × W × H): 3300 × 1800 × 2700 mm • Machine weight: 11,400 kg TECHNICAL SUPPORT We provide professional technical advice before purchase as well as comprehensive after-sales support. Our specialists assist with tooling selection, bending technology, and machine parameter optimization for different materials. We also offer warranty and after-sales service together with transport arrangements throughout Europe and worldwide. Bdedpfx Aezg Hzxol Aeh Brand-new machine supplied with the manufacturer's warranty, fully operational and ready for immediate use.