Used Ctx 650 Ecoline for sale (2,976)

Condition: good (used), Year of construction: 2013, Main and counter spindle C-axis on main and counter spindle 2 x 12-position turret VDI 40 Y-axis Chuck flushing device Tool monitoring Brankamp Coolant system 980 liters with belt filter Gisdpfxsy Ivyie Agpjt Conveyor belt Oil mist separator Chip conveyor without bar feeder

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510 Control: Siemens 840 D with Shop - Turn Year of manufacture: 2004 Travel X / Z: 300 / 1050 mm Turret: 12 stations Gedpfoy N S E Rjx Agpoit Tool holder: VDI 40 Spindle speed up to: 3,500 rpm Bar capacity: 90 mm Quill travel: 150 mm Tailstock Coolant pressure: 20 bar Chuck size: 315 mm Spindle hours approx.: 14,000 * Batch sizes of 0 - 5 have been produced on the machine * Programming was carried out directly at the machine

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 480 mm, turning diameter: 650 mm, travel distance X-axis: 480 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 17 m/min, Equipment: chip conveyor, cooling unit, Gildemeister CTX 600 CNC Lathe – Well-Maintained, Inspected & Ready for Operation For sale is a Gildemeister CTX 600 CNC lathe in well-maintained, technically flawless condition. The machine has been serviced regularly and is in good condition both visually and mechanically. It is fully operational, inspected, and immediately ready for use. The machine is equipped with a new control cabinet cooling unit (Rittal SK 3127.100, year of manufacture 2023). This is an air/air heat exchanger designed for reliable and low-maintenance cooling of the control cabinet electronics, thereby improving operational safety and extending component lifetime. With our all-inclusive service package, we personally handle the entire service process upon request – from delivery to commissioning of your new machine. This includes unloading, positioning, and alignment of the lathe. Our experienced service technicians will then professionally commission the machine, carry out all necessary function checks, and ensure that your Gildemeister CTX 600 operates reliably and precisely. Additionally, we offer customized training sessions for your staff, so you can make optimal use of the machine from the start. Even after installation, we remain at your disposal – whether for maintenance, technical queries, or future upgrades. With our all-inclusive package, you have nothing to worry about – we ensure everything runs smoothly so you can fully focus on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us, including high-quality Donaldson extraction units, to make your production even more efficient and cleaner. Gijdpoy Ivflsfx Agpst Our Service Commitment: With us, quality, expertise, and customer satisfaction come first. Our team is made up of qualified and experienced technicians, specializing in Gildemeister machines as well as other brands. We place great value on personal support and are happy to assist you at any time, even after the purchase. You also have the opportunity to inspect and test the machine under power at our facility at any time. You are warmly invited to visit us and see the condition and operation of the machine for yourself. With us, you are in the best hands – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information subject to change and without guarantee.

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310 Gisdpfx Agev Ehawspet

Condition: like new (used), Year of construction: 2023, functionality: fully functional, CNC Siemens 828 D Year 2023 Gijdpfey Nzc Eex Agpst • Max. diameter: 400 mm • Max. workpiece length: 550 mm • Axis travel: X-axis: 240 mm Z-axis: 600 mm Y-axis: +/- 60 mm Sauter 12-position BMT Sub-spindle Full specification available as PDF file

Condition: used, Model: OptiDipper 650 Year: 2013 Condition: Used Serial number: 87 Stock number: 3254 Belt width: 650 mm Product height: max 50 mm Filling: min 40 L Infeed conveyor length: 600 mm Outfeed conveyor length: 950 mm Power: 3 x 400V, 50Hz, 1.8kW Dimensions: 3850 x 1400 x 1350 mm Weight: 850 kg Godoyz Sylopfx Agpsit

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 11 kW (14.96 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,175 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 12, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Material Shredder Chipper Wood Shredder MHR510 ecoline The MHR ecoline series are robust and energy-efficient wood shredding machines, designed for reliable continuous operation in commercial environments. These plug-and-play shredders impress with their high performance, low energy consumption, and excellent cost-effectiveness. This makes the chippers ideal for craft businesses, recycling companies, and woodworking shops looking for an economical yet powerful solution. Advantages - Continuous, consistent shredding process - High performance with low energy consumption - Robust construction Gjdpfx Aey Sgpvogpsit - Larger feed opening - Excellent price-performance ratio - Plug-and-play (5-pin CEE plug, 400V, 32A three-phase) - Siemens PLC controlled - MHR510 ecoline Rößler Material Shredder "Made in Germany"

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: Pink Rose Gisdoy A Imqopfx Agpet 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain With conveyor With driven tooling With documentation

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister Lathe Color: White 3 axes X, Z, C Model: CTX 400 Series 2 CNC Heidenhain Gjdjy A Ilyopfx Agpsit With chip conveyor With driven tooling With documentation

Condition: excellent (used), FOD BYDGOSZCZ Shaft Multi-Blade Saw* DPPA III 50 650/140 Catalogue number: 7318 TECHNICAL DATA - Maximum cutting height: 140 mm - Maximum workpiece width: 700 mm - Working width of shaft with saw blades: 650 mm - Maximum saw blade diameter: 400 mm Gsdpey R Dpqjfx Agpeit - Arbor hole diameter: 70 mm From above: - Kickback pawls - 2 driven, toothed feed rollers From below: - Kickback pawls - 2 driven, smooth feed rollers - Saw shaft - Ribbed feed roller - Stepless feed speed adjustment with inverter - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2500 x 1400 x 1900 mm - Weight: approx. 2500 kg – Made in Poland – Used machine, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to significant exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized representative of the manufacturer. All trademarks and names are used solely for identification and informational purposes. We only resell products that have been previously placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 2015, Front cutter Kolbus FA 650 Year: 2015 Description: - TFT Touch screen - Opening by suction belts - Cutting unit Gsdpfx Ajyzm T Tjgpjit - Knife pre-setting device - Throughfeed Max. mechanical speed: 4.000 cycles/h Maximum size (uncutted): 480 x 375 x 50 mm Minimum size (uncutted): 125 x 105 x 3 mm Maximum size (cutted): 480 x 350 x 50 mm Minimum size (cutted): 125 x 100 x 3 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Gijdpfx Agoy Rqhaepjt Price: on request contact: Mr. Ralf Schulz

Condition: used, mileage: 827,000 km, power: 478 kW (649.90 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, crane, differential lock, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, = Additional options and accessories = - Flashing light - High Beams - Hub Reduction - Immobilizer - I shift - Lift Axle - PTO - Radio - Sleeping cabin - Speed limiter - Sper - Toolbox = Remarks = Crane Number of hydraulic extensions: 2 Gjdjy Emzfepfx Agpeit Rotator: ✓ Squeeze Box: ✓ Volvo FH 650, 2017, 827000 km, Euro 6, 8x4 with Hub Reduction, Kesla 2112 T Loading crane, 2x Hydraulic extendable, Wooden stakes easy to dismantle for a flat loading floor, Loading crane with quick coupler can be dismantled = More information = Front axle 1: Steering Front axle 2: Double wheels; Differential lock; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Lift axle; Steering Number of cylinders: 6 Crane: Kesla 2112 T, year of manufacture 2017, on rear of chassis = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 2014, operating hours: 20,980 h, turning length: 800 mm, turning diameter over cross slide: 340 mm, turning diameter: 500 mm, spindle motor power: 25,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 76 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 800 mm, mount diameter: 250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, rotational speed (min.): 1 rpm, overall weight: 6,800 kg, DMG MORI CTX beta 800 – CNC Lathe Manufacturer: DMG MORI Model: CTX beta 800 Year of manufacture: 2014 Control: Siemens ErgoLine Technical Data Max. turning diameter: approx. 500 mm Turning diameter over cross slide: approx. 340 mm Turning length: approx. 800 mm Chuck diameter: 250 mm Bar capacity: approx. 76 mm X-axis travel: approx. 300 mm Z-axis travel: approx. 800 mm Tool turret: 12-position Spindle speed: max. 4,000 / 6,000 rpm Spindle power: approx. 25 kW Voltage: 400 V Frequency: 50 Hz Connected load: approx. 65 kVA Machine weight: approx. 6,800 kg Equipment Siemens ErgoLine operator panel Hydraulic chuck C-axis Chip conveyor Gisdpsy R Agbofx Agpot Coolant system Precision CNC slant bed lathe Condition Machine can be inspected under power Subject to prior sale Offered without tooling Ex-works location Technical data without guarantee Service Disassembly, loading, and transport possible Europe-wide processing available 📍 Location: Germany 📩 Further information, photos, and videos available upon request

Condition: excellent (used), Year of construction: 2017, operating hours: 13,240 h, turning length: 500 mm, turning diameter over cross slide: 290 mm, turning diameter: 500 mm, spindle motor power: 13,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 6,000 rpm, spindle bore: 73 mm, travel distance X-axis: 210 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, overall weight: 4,300 kg, ## DMG MORI CTX alpha 500 – CNC Lathe Manufacturer: DMG MORI Model: CTX alpha 500 Year of manufacture: 2017 Control: Siemens 840D sl / ErgoLine ### Technical Specifications * Max. turning diameter: approx. 500 mm * Turning diameter over cross slide: approx. 290 mm Gsdpfx Agoy Rzggopjit * Turning length: approx. 500 mm * Chuck diameter: 210 mm * Bar capacity: approx. 65–73 mm * X-axis travel: approx. 190–210 mm * Z-axis travel: approx. 525 mm * Y-axis: optional / approx. ±40 mm * Tool turret: 12 positions * Spindle speed: max. 5,500 / 6,000 rpm * Spindle power: approx. 13–20 kW * Voltage: 400 V * Frequency: 50–60 Hz * Connected load: approx. 30 kVA * Machine weight: approx. 4,300–4,650 kg ### Equipment * Siemens ErgoLine operating panel * Hydraulic chuck * C-axis * Chip conveyor * Coolant system * Precision slant-bed CNC lathe ### Condition * Machine can be inspected under power * Subject to prior sale * Sold without tooling * Ex works * Technical data subject to confirmation ### Service * Dismantling, loading, and transport available * Europe-wide handling possible 📍 Location: Germany 📩 Further information, pictures, and videos available on request

Condition: ready for operation (used), Year of construction: 2005, operating hours: 19,229 h, functionality: fully functional, machine/vehicle number: 8043943123C, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Turning diameter: 465 mm Turning length: 1,050 mm Swing diameter: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Spindle speed range: 3,500 rpm Rapid traverse X/Z: 30 m/min MACHINE DETAILS Control: Siemens 840 D Number of tool positions: 12 positions Tool holder: VDI 40 Gisdpfx Aoy D I Ttjgpet Weight: 7,500 kg Operating hours Spindle hours: 19,229 h Power-on hours: 81,347 h Note: The machine can be inspected under power upon request.

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Giedpfey Htqcox Agpet Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: ready for operation (used), Year of construction: 2019, clamping force: 6,500 kN, screw diameter: 60 mm, overall weight: 6,500 kg, controller manufacturer: ENGEL, This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine. Additional equipment • Oil Reservoir Capacity - Injection Unit: 500 l • Maximum Cooling Power (32°C Water Inlet): 29.40 kWcool • Water Consumption (32°C): 4.80 m3/h Machine Benefits Qualitative Machine Benefits • The machine has electric water batteries (4 e-flomos with 8 circuits each). • The injection units are fitted with accumulators which enable a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Machine Benefits • Maximum injection capacity: 890 cm³ • Screw torque: 2000 nm // maximum screw speed @ reduced torque: 275 min-1 • Reduced torque @ maximum screw speed: 1600 nm • Recovery rate (3-zone screw): 51 g/s // recovery rate (barrier screw): 67. 1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • Ld ratio: 24. 0 • Heating zones incl. Nozzle: 8 // heating wattage: 27. 5 kwel • Opening force with pressure pad: 510 kn • Maximum distance between platens: 1750 mm Extra Information Dimensions & Weight • Drop Out Chute Width: 1100 mm • Weight of Clamping Unit: 20,000 kg • Maximum Mold Weight (Moving Platen): 7,330 kg • Maximum Mold Weight (Stationary Platen): 7,330 kg • Maximum Mold Weight (Total): 11,000 kgCycle Data (Euromap 6) • Stroke: 700 mm • Dry Cycle Time: 2.9 s Control System: Monocompute CC300 Main Features • 21.5” full HD touchscreen • USB interface / Ethernet connection Godpoy D Npcsfx Agpoit • E-move control element • 3 keycards for user login • Graphic symbols for cycle control • Screen languages: German, English • Acoustic error signal / Signal light for error displayPrograms & Monitoring • Power Control: optimizes motor performance during dispensing • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight & viscosity • IQ Weight Control: automatic injection parameter adjustment during fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Plates • Reinforced clamping plates (FAP & BAP +50 mm each) • Reduced min./max. tool height and panel distance (–100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical calotte minimized • BAP: without ejector opening • Additional threads according to EUROMAP VOL1 • Centering grooves according to drawing • Plate ejector – Variant A (adapted to clamping pattern) • Safety interface for ejector Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moving platen • 2-fold on fixed platen • 2-fold on moving platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for intermediate core pull position Mold Heating & Cooling • Mold heating: 16 circuits, max. 40 kW heat output (Euromap 14) • Temperature monitoring interface (moving & fixed platen) • 4-fold hydraulic mold nozzle control • Separate cooling water connection (tool & machine) • Temperature control unit interface: Engel protocol, 20 mA current loop • 4-way flow regulator (0–10 l/min) • Hose specification: max. 90 °C / 4 bar • Hoses for mold cooling

Condition: used, Year of construction: 2001, Lippert belt conveyor GF 20000-650-500 RA1407 Gijdpfx Aoy Rbg Hogpet The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 20.000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2011, turning diameter 410 mm turning length 800 mm control Sinumerik 840 D ERGOLine Siemens greates pass round over bed 700 mm max. turning diameter 410 mm travel -x axis 300 mm travel -y axis +/- 60 mm travel -z axis 800 mm turning speed range - spindle max. 4.000 U/min chucking diameter 260 mm spindle bearing diameter 130 mm power capacity 40% ED = 34 kW power capacity 100 % ED = 25 kW max. Torque 280 Nm C-Axis 0,01 ° turret (x-stations) 12 tool taper DIN 69880 / 40mm driven statition 6 pos Spindle speed driven tools ~ 4.000 min -1 power capacity - driven tools 40% ED = 11,3 kW power capacity - driven tools 100 % ED = 5,6 kW rapid traverse ( X / Y / Z ) 30 m/min tailstock adjustment 800 mm morse taper MK 5 total power requirement 65 kVA weight of the machine ca. 6,2 t dimensions of the machine ca. 5,5 x 3,0 x 2,5 m CNC Turning- and Milling Center GILDEMEISTER - CTX beta 800 V4 - Spindle-Hours: ca. 14.779h - Package for unstable networks - Control panel extension - 95mm hollow clamping device - 95mm hollow spindle stop - Differential clamping for main spindle - incl. workbench - incl. tool cabinet - incl. tool cabinet for VDI tool holders Gijdpfx Agey Hl Exepot - incl. 2x powered tools - incl. 6x tool holders

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 6 h, functionality: fully functional, power: 18.5 kW (25.15 HP), overall weight: 1,400 kg, total length: 2,135 mm, total width: 1,480 mm, total height: 1,775 mm, working width: 830 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 20, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 830 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Material Shredder Chipper Wood Shredder Mulcher Shredder MHR830 ecoline The MHR ecoline series are robust and energy-efficient wood shredders designed for reliable continuous operation in commercial environments. These plug-and-play shredders stand out due to their strong performance, low energy consumption, and excellent value for money. This makes these chippers the ideal solution for craft businesses, recycling companies, and woodworking operations looking for a cost-effective yet powerful machine. Advantages Godpfx Ajy N Sppsgpjit - Continuous, uniform shredding process - High performance with low energy consumption - Robust construction - Larger feed opening - Excellent value for money - Ready-to-use - Siemens PLC controlled - MHR630 ecoline Rößler material shredders "Made in Germany"

Condition: used, Year of construction: 2021, input voltage: 230 V, input current: 1 A, We are offering this used TIC SFM-650 DHE screen printing machine, year of manufacture 2021. Model: TIC SFM-650 DHE Voltage: 230 V Current: 1 A Serial number: 201540 Gsdpoyhcmhsfx Agpeit Year of manufacture: 2021 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 Godjx Sx Htopfx Agpoit • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2007, CNC Turning and Milling Center Machine type: DMG CTX 210 V3 Control: Heidenhain CNC Pilot 4290 Year of manufacture: 2007 Available from: immediately / now TECHNICAL DATA: Max. turning length: 365 mm Turning diameter: 290 mm Max. swing diameter over bed: 380 mm C-axis Spindle speed range: 20 - 6,000 rpm Bar capacity: 56 mm Travel distances: X-axis: 160 mm Z-axis: 339 mm Number of turrets: 1 Tool holder: VDI 30 Tool stations: 12 Driven tools: 12 Giodpfx Asy Ecuhjgpst Tailstock Space requirements (LxWxH): 2.88 m x 1.72 m x 1.67 m Machine weight: 4,200 kg Features: Operating manual / instruction manual

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Gjdpfx Aoy Igbqegpsit