Used Deckel Maho Dmu 80 T for sale (336)

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Cedpfxjvt D D Uo Akqerf Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: ready for operation (used), Year of construction: 2003, operating hours: 13,028 h, spindle speed (max.): 9,000 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2003. It features a 3+2 axis setup with CNC-driven linear axes and a manual swivelling rotary table for enhanced versatility. The machine comes equipped with tools and an attached tool list holder for convenience. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T universal machining centre we have for sale. Contact us for further details. Cedpfxjzmhwzs Akqorf - Axes: 5-axis (Typically configured as a 3+2 axis setup featuring 3 CNC-driven linear axes X/Y/Z and a manual/handwheel-operated swivelling rotary table for the B and C axes)- Included Equipment: Tools included, attached tool list holder on the enclosure shell, electronic handwheel/control pendant inside cabinet

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 40 kVA, torque: 1,100 Nm, controller manufacturer: HEIDENHAIN, controller model: MILLPLUS, workpiece weight (max.): 330 kg, total height: 2,500 mm, total length: 3,500 mm, total width: 2,400 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 32, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, DECKEL MAHO DMU 50 EVOLUTION Universal Machining Center - Operating hours: see photos - Tool holder: SK 40 - Resolution of the measuring system X/Y/Z: 0.001 mm - Positioning tolerance: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool changer: 6 kg - Max. total tool weight in the magazine: 90 kg - NC rotary table with swivel axis, clamping surface: 500 x 380 mm - Distance of T-slots/size: 63/4 H 7 mm - Centering bore diameter: 30 H 6 mm - Max. revolutions of the table top (rotary axis): 33 rpm - Max. swiveling torque: 1400 Nm - Swiveling speed: 26 rpm Cedpezlgnvefx Akqorf Attention: The item must be picked up between October 7th and October 14th, 2026, on a date to be agreed upon. FCA D-35576 Wetzlar - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,195 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,080 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: Millplus IT, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details. • Axes: 5-axis (X, Y, Z + A, B) • Condition note: Spindle collided with workpiece and is currently seized. Advised that it can be rebuilt/reinstalled by a specialized service company; estimated parts cost approx. €7,000. Crjdpfx Akszlgxujqef Additional equipment • Automation: Erowa Robot Easy system with 12 pallet stations • Workholding: Erowa zero-point clamping system (extensive set) • Rotary/tilting table: Nikken CNC rotary tilting table (fully refurbished in 2016) Technical Specification Taper Size SK 40

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Csdpfx Aksv Td Eljqerf Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,500 mm, table load: 400 kg, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. • Table size (L x W): 1000 x 600 mm • CNC control: Heidenhain MillPlus • Tool magazine capacity: 20 tools • Through-spindle coolant: Yes Additional equipment • Chip conveyor Crodpfx Akjzhm Etsqof Dimensions Machine Depth 3000 mm

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, in TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer: Heidenhain, type iTNC 530 >> Travels X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed rate continuously programmable up to X, Y, Z 20000 mm/min >> C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- and Z-axis 50 m/min >> X-axis 80 m/min (linear drive) Codpfxszg Dnvj Akqorf >> B-axis 40 rpm >> C-axis 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface Ø 500 x 380 mm >> T-slot spacing 63/14H7 >> Table load 200 kg >> Dimensions and weight: approx. >> Machine without control and attachments >> Depth 3.0 meters, width 2.4 meters, height 2.6 meters >> Weight approx. 7000 kg >> Operating voltage 400 V >> Electric handwheel Heidenhain HR 410 >> Power connection 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extractor >> IKZ 40 Bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Compressed air supply to the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage detection >> Complete documentation The following work has been carried out: >> Main spindle overhauled >> Complete maintenance: All coolant hoses and pneumatic hoses renewed, filters new, fluids and belts renewed. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance report) About the machine: Offered is a Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain. The machine is in very good condition. The main spindle has been overhauled (replacement spindle) on the DMU, completely serviced, and an acceptance report has been created. Invoices for the overhaul of 42,000 Euros (net) are available. Take the opportunity to inspect and test the machine on site while it is powered up.

Condition: ready for operation (used), operating hours: 41,072 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Spindle speed: 12,000 rpm Feed rate: 20-10,000 mm/min Rapid traverse rate, X/Y/Z-axis: 26/26/20 m/min Number of tool changer positions: 20 Spindle taper: SK 40 Table clamping surface (L x W): 1,000 x 600 mm Credpfezd Aw Djx Akqsf MACHINE DETAILS Control model: Heidenhain TNC 430 Total power consumption: 26 kW Operating hours: 41,072 h Machine weight: approx. 6.5 t EQUIPMENT B-axis (NC milling head) Electric handwheel Chip conveyor Cooling system

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm Crsdpfx Aksym Sdyjqjf ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2002, x-travel 750 mm y-travel 600 mm z-travel 520 mm Csdpfx Aountmdekqsrf control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 35 / 25 kW max. Torque 130 / 87 Nm tool taper HSK-A63 table surface area 700 x 500 mm Swivel range B-Axis 0 - 180 ° Swivel range C-Axis 0,001 ° max. table load 350 kg center hole 30 H6 mm T-slots 7x 14H7 x 63 mm table turning speeds 21,5 rpm number of toolpositions 32 pos. max. tool length 315 mm max. tool diameter 105 mm max. tool-dia with free toolbox 130 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 50 / 50 / 50 m/min feed speeds 20.000 mm/min Feed force X / Y / Z: 8 / 8 / 7 kN total power requirement 50 kVA weight of the machine ca. 8,5 t dimensions of the machine ca. 6,5 x 3,5 x 3,5 m 5 Axis-CNC-Machining Center DECKEL MAHO - DMU 70 eVolution - 5 Axis - NC-Swivel-Rotary-Table - Operating-Hours: Power-On: ca. 62.500h / Spindle: ca. 15.100h

Condition: good (used), For sale is a Deckel Maho DMU 60T machining center. The machine can be inspected on site. Crsdpoydm Saofx Akqsf

Condition: used, Year of construction: 2001, Technical details: x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm c-axis: Tisch 360° ° b-axis: Spindel=rechts:90/links=10° manuell ° control: Heidenhain TNC 430 MillPlusM table-size: 1000x600 mm table load capacity: 400 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. Crodju Idgcopfx Akqof feed speeds infinitely variable: x/y/z= 20 - 10.000 mm/min tool changer: 2 Magazine tool changer with: 12 place pro Magazin spindle hours: 21 212 h operating hours - idle run: 49 845 h total power requirement: 20,6 kW Weight approx.: 6,7 t dimension machine xH: 3,0 x 2,0 x 2,15 m Equipment: - AC motors for x/y and z-axis - Tool clamping hydraulic/mechanical - Chip conveyor with separator (screw conveyor) - seperately working indexing head Ø 300mm with manual control unit for B-axis table tilting -10° / +95° and C-axis table turning 360° (not interpolable, electric selectable via manual control unit) - Coolant unit 8 m³/h (dimensions: L:1,1 x W: 0,54 x H:1,2m) - control unit *

Condition: good (used), Year of construction: 2002, This vertical machining center was built in 2002 in Germany. It is in good working condition, with a maximum spindle speed of 18000 rpm and 21232 spindle hours. Including: Cnc controlled B-axis and C-axis Crodpjy Tv Epofx Akqjf Cooling through the spindle high pressure 40bar M&H 3d-probe Tool measurement It can be inspected under power in Belgium and will be available in October 2026 Control Heidenhain iTNC 530 Travel X 1080 mm Travel Y 710 mm Travel Z 710 mm Max spindle speed 18000 rpm Tool changer/magazine SK40 Number of toolpositions 32 Spindle hours 21232h Machine dimensions (LxWxH) 3500 x 2200 x 2410 mm Machine weight 9000 kg Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: Heidenhain, controller model: TNC640, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 26,500 h, coolant supply: 40 bar, spindle nose: SK40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in good condition and can be inspected while powered on. Credpfx Akozcuwnsqof

Condition: ready for operation (used), Year of construction: 2005, operating hours: 16,700 h, spindle speed (max.): 6,300 rpm, total height: 2,750 mm, overall weight: 10,200 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle motor power: 16,000 W, product length (max.): 6,600 mm, table load: 600 kg, number of axes: 5, This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details. • Spindle torque: 475 Nm (40% DC) Crodsy I Aqujpfx Akqof • Tool changer: 60 positions (chain magazine) • Rapid traverse (X/Y/Z): 50 m/min • Feed rate (X/Y/Z): 50,000 mm/min • Table: NC swivel rotary table (d 630 mm) • Swivel range: -45° to +30° • Cooling: 40 bar internal coolant supply (IKZ) through spindle center • Power consumption: 50 kVA • Defect: Transmission damage Additional equipment • Chip conveyor: Scraper belt type, discharge height 956 mm Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details. • Table size: 1000 x 600 mm Csdpfx Akjy Hktbsqjrf • Tool magazine: 2x12 positions • Incl. a set of tool holders • Under power and well maintained machine. Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,215 h, functionality: fully functional, machine/vehicle number: 11170003783, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller model: Heidenhain iTNC 530, workpiece weight (max.): 800 kg, spindle speed (max.): 16,000 rpm, coolant supply: 20 bar, spindle nose: HSK-63, number of spindles: 1, number of slots in tool magazine: 60, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Rotary table diameter: 900 x 630 mm Coolant flushing system Electronic handwheel Coolant gun QuickSet cycle 3D measuring probe, Heidenhain Operating mode 4 Air cooling via spindle Internal coolant supply via spindle Operating hours: 63,490 hours Codpfx Akozabqcsqorf Programming hours: 28,215 hours Without clamping devices Without tools The machine is fully functional and still in operation. An inspection under power can be arranged upon request.

Condition: used, Year of construction: 1999, x-travel 500 mm y-travel 400 mm Cjdpfxjy Aa Nks Akqorf z-travel 400 mm control Heidenhain weight of the machine ca. 3200 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,183 h, functionality: fully functional, machine/vehicle number: 15035709304, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, The machine will remain powered until 06.03.2026. TECHNICAL DETAILS Travel distances X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm C-axis: ±360° B-axis: 180° Csdpfx Aksymmpdjqsrf Spindle type: SK-40 Spindle speed: 18,000 rpm Rotary table Clamping surface: 700 × 500 mm T-slot spacing: 63 mm Number of T-slots: 7 T-slot size: 14 H7 Centering bore: 30 H6 Rotary axis torque: max. 1,674 Nm Table rotation speed: max. 21.5 rpm Swivel torque: max. 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 0 – 180° Input/display unit: 0.001° Maximum tool length from spindle nose: 315 mm Maximum tool weight (with automatic tool changer): 6 kg MACHINE DETAILS Control system: Siemens 840D Shop Mill Operating hours Power-on hours: 65,794 h Spindle hours: 18,183 h Dimensions & Weight Machine dimensions (L x W x H): 2,604 x 2,820 x 2,785 mm Machine weight (including base): 9,255 kg EQUIPMENT 5-axis simultaneous machining 32-position tool changer Chip conveyor IKZ (internal coolant supply) with 70 bar Blum TC50 spindle probe

Condition: repair required (used), Year of construction: 2003, operating hours: 24,700 h, functionality: limited functionality, Year of manufacture: 2003 NC rotary table: C-axis, Ø800x620 Swiveling milling head: B-axis, 0-90° Travel: X 1080 Y 710 Z 710 Control system: iTNC530 Internal cooling pressure: 40 bar Internal air blow External cooling Cedpfxjy Tadvs Akqorf Spindle speed: max. 12000 rpm Tool holder: SK40 Tool magazine: 32 positions Measuring probe: Infrared, Heidenhain Electric handwheel: Heidenhain Rotating viewing window: Rotoclear Chip conveyor Oil mist extraction Coolant system with paper band filter Chip flushing gun Work area light Clamping fixture (next to the rotary table) for longer workpieces The clamping mechanism of the milling head is leaking/defective on this machine.

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Crodpjw Tc Nysfx Akqof

Condition: good (used), Year of construction: 2004, functionality: fully functional, operating hours: 39,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, controller model: Heidenhain Mill Plus IT, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Table size: approx 500 mm ⌀ Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Csdpetyit Eofx Akqjrf Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website. Crjdpfx Aowxd Agekqof

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Technical data: Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Credpfxou Unh Is Akqof Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, DECKEL MAHO DMU 60T HEIDENHAIN 426 – worktable dimensions (length x width): 900 x 500 mm Crodpewg Df Dsfx Akqjf – table load: 350 kg – maximum feeds in the X/Y/Z axes: 600/525/ 500 mm