Used Demag Df 110 C for sale (559)

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep Hsdpfxox D Nlus Aldsnr • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN Hedpjyfq Aljfx Aldjnr • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)

Condition: used, Suspension crane runway Crane system made of aluminum system profile similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA No DEMAG but similar to KBK Overhead monorail system with single girder crane bridge Light crane system made of aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single girder bridge Profile height: 155 mm Profile width: 100 mm - Natural anodized aluminium profiles - Carriage with smooth-running plastic rollers - Power supply via trailing cable on the wire rope Consisting of: Hedouch Rfopfx Aldenr 2 pieces of 4.8 meter aluminum system profile for the longitudinal track with 3 suspension eyelets each 1 piece of 3.35 meter aluminum system profile for the crossbeam (single girder bridge) with 2 suspension eyelets 1 trolley for crane suspension on the crossbeam 1 carriage on the longitudinal beams (2 pieces) 6 end covers suitable for the profile rails Weight of profile rails: 125 kg Very good condition, as good as new Hoists can be found in our WebShop under the search term "chain hoist" You can find suitable assembly material in our WebShop under the search term "KBK"

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type DKUN 1-100 K V1 F4 Manufacturer's serial number: 61801899, Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control pendant cable length: approx. 1.7 meters Power connection: 400 Volts, 50 Hz 1 load strand = 100 kg Weight: 16.5 kg Good condition Hedohtr Eyjpfx Aldonr

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Good condition Hedpfx Aju Swb Ueldjnr

Condition: excellent (used), functionality: fully functional, DEMAG Crane Overhead System KBKII-R crane system Workshop crane Overhead traveling crane Original price: over €40,000.00 Includes left-hand switch item no. 87396344 (alone, original net price €11,000.00) 6x 6m straight sections 2x 5m 4x 2m 3x 1.5m (Total of 60 running meters of straight rail with integrated, internal busbar – no festoon cable required!) Hnjdsv Uvdpjpfx Alder 2x 90-degree curve KBKII-R Supplied with all necessary parts such as trolleys, suspension hangers, clamps, etc. Option: 4x DEMAG electric chain hoist PK5 N-F 500kg, 2 speeds (included with system but not binding), very good condition. System in inspected condition with inspection logbook, fully functional and ready to use immediately. Info: Over 20,000 DEMAG spare parts in stock! Please also check out my other available inventory offers!

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! also available as Craneset Hsdpeq R N Tqefx Aldenr

Year of construction: 2011, operating hours: 400 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, i=61 used, good condition, complete with top block and bottom block, without electrics, DMF, without chassis, for mounting on EZ or as foot hoist Engine ZBR132 C4 Hnjdpfx Asrbznnjldsr

Year of construction: 2022, condition: new, functionality: fully functional, lifting height: 10,000 mm, main lifting speed: 6,300 mm/min, i=79, new, 2x available, with top block, with bottom block, without electrics, without DMF KBH 140 B4 + KBA 80 B4 Fine input gearbox F10 Hodpfx Aloq R N T Ajdonr Acid protection coating Various accessories on request

Year of construction: 1972, condition: used, functionality: fully functional, machine/vehicle number: TRFA12+14x, 1x Demag friction wheel drive travel drive for rope hoist crane hoist P-train bridge crane etc Stock from years of construction 1971 + 1976: 14x RF310 - motor type 16/6KF8-2 0,15-0,6KW 5m/25m/min price 2850.- / pc. 12x RF400 - motor type 19/11KF12-2/2 0,18-1,1KW 6,3m/40m/min Price 3650.- / pc. with 2 speeds Complete with tension clamps, motor/gearbox and friction wheel We can also overhaul defective, porous friction wheels for you and have new ones made - please enquire. Hnedpfot Rtm Nox Aldjr Weight complete approx. 100-150 kg, connection to 380V 50Hz Used condition Item location is 75053 Gondelsheim See pictures

Year of construction: 1998, condition: excellent (used), machine/vehicle number: TH20010018, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 3.2t - 3200KG, track 13300mm Hnodpfx Alov A Rr Doder Outer dimensions with head carriage approx. 13500mm Crane with FU control and servo motors!!! 2x Demag DH rope hoist with floor and radio control RC-J for individual or tandem control of both hoists Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 2500mm Lifting height of rope hoist 6000mm Weight approx. 3200KG incl. 2x 25m guide rails HEB400 (400x300mm), incl. power rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available from location 75053 Gondelsheim Very good used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: GP330/W404, DEMAG KBK Crane Sky / Crane Runway 7x6m (bridge travel approx. 5.5m) The crane is also available in several other dimensions with a raised trolley. Load capacity / lifting capacity: 1000KG Technical data of the system: Crane runway made of Demag KBK2 rails Hodpey Hf A Djfx Aldenr With raised trolley – crane girder is positioned between the two runways for maximum lifting height System is delivered complete: KBK rails, rail connectors, trolleys, end plates, brackets/suspenders, etc. Incl. SWF chain hoist NL 1000KG, year 2018, crane itself is older! Crane is dismantled and immediately available Very good condition, see pictures Item location: 75053 Gondelsheim Shipment by freight forwarder or pickup only by appointment Demag KBK1, KBK2, and KBK3 rails are stock items! Other KBK systems with load capacities from 125KG to 1600KG available in stock. Please enquire about your crane runway with desired load capacity and dimensions without obligation.

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 878 0730, clamping force: 2,500 kN, clearance between the columns: 630 mm, mold height (min.): 330 mm, ejector force: 69,000 N, ejector stroke: 200 mm, opening stroke: 675 mm, plate length: 950 mm, plate width: 950 mm, total length: 6,500 mm, total width: 1,900 mm, total height: 2,300 mm, overall weight: 13,100 kg, heating capacity: 27 kW (36.71 HP), pressure: 190 bar, pump power: 4,500 W, power: 72 kW (97.89 HP), type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, input current: 167 A, Equipment: documentation/manual, Technical Specifications – Demag Ergotech 250/630–1450 Clamping force: 2,500 kN Tie bar spacing: 630 × 630 mm Maximum opening stroke: 675 mm Minimum mold height: 330 mm Maximum mold height (with WA): 710 / 830 mm Platen size (H×V): 950 × 950 mm Maximum mold weight: 3,300 kg Maximum weight of moving mold half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Injection volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater output (screw cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power Supply Pump unit: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Maximum current consumption: 167 A Dimensions & Weight Overall length: 6,500 mm Hnodpfx Alow Hq Hhjdsr Overall width: 1,900 mm Overall height: 2,300 mm Machine weight (net): 13,100 kg

Year of construction: 2002, condition: good (used), machine/vehicle number: HHNRW, Demag / CTI monorail with 7 Demag DH hoists (ladle transport system of an aluminum foundry) Payload / lifting load 6300 -7000 kg / 6.3 + 7 tons approx. 100m runway beam (CTI profile - kit system) without hall constructions ff. 9 pneumatic switches, bends, various distributors + control cabinets + pneumatic controls Documentation including circuit diagrams and test books are available Hoists can be moved individually on the rail system, each hoist has its own control, including busbar system to supply the hoists Can be moved completely in two stages - fine stroke! Used condition - system was serviced / overhauled in 2018 for 155000 euros Hnedpjh Ad Saefx Aldsr (rails / hoists) Plant is dismantled and immediately available (scope of delivery approx. 20-25to approx. 2 truck loads) More pictures upon request. Shipping by courier possible, collection preferred Freight costs within a radius of 500 km 1400 euros. Please inquire about the exact costs according to your zip code!

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: GP147/147.2/147.3/58, 1 Vetter wall-mounted slewing crane 500 KG payload / lifting capacity Crane is available 4x!!! Type PW2.5-4.0 Outreach approx. 4m, 500 KG - 0.5t payload With chain hoist, 500 KG load capacity (2 lifting speeds) Total weight approx. 500 kg Year of manufacture: 1999 Complete with wall bracket, jib arm, chain hoist, cable drag, trolley, and small parts Hjdpfx Aloy D D Imsdsnr Slewing range approx. 180° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Fully functional condition See pictures Shipping via freight forwarder or pickup Please inquire about shipping costs by postal code.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: GP55/179, 1 Vetter wall-mounted slewing crane, 500 kg load capacity / lifting capacity Crane available 2x!!! Type PW2.5-5.5 Jib length approx. 5.5 m, load capacity 500 kg - 0.5 t With chain hoist, load capacity 500 kg (2 lifting speeds) Total weight approx. 500 kg Year of manufacture: 2001 Complete with wall bracket, jib arm, chain hoist, cable trolley, end carriage, and small parts Slewing range approx. 180° Item location: 75053 Gondelsheim Unit is fully dismantled and immediately available Fully functional condition Hnsdpfx Aloy D D Hcedjr See pictures Shipping by freight carrier or collection Please inquire about shipping costs according to postal code.

Year of construction: 2007, condition: used, Offer 22111 Technical specifications: - HADEF Type CH 2 hoist, built in 2007, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min Hnsdev S Du Rspfx Aldjr - Manual trolley - Clearance between the traveling columns approx. 2750 mm - Clearance height at the bottom edge of the portal beam approx. 2900 mm - Mobile beam approx. 1500 mm - 4 swivel casters - Total width approx. 3050 mm - Total depth approx. 1500 mm - Total height approx. 3050 mm - 400 V drive - Total weight – crane + hoist approx. 250 kg

Condition: new, functionality: fully functional, 80 pcs new DEMAG rope guides / rope guide crane hoist parts for DH2000 DH1000 DH500 DH300 Hnjdpfx Alov T Tq Djdjr and 30x P-Zug rope guides P200 to P1000 plus 50 brakes (e.g. new brake discs, brake pads, brake shields, brake covers) all brand new Manufacturer's original price approx. €300,000.00 Info: We have over 20,000 DEMAG spare parts in stock! Also check my other offers from warehouse stock!

Condition: good (used), Year of construction: 2010, machine/vehicle number: ENOG, DEMAG KBK Overhead Crane System, approx. 8x4 m Payload / Lifting Capacity: 250 kg (0.25 t) Technical data of the system: Crane runway made from Demag KBK1 + 2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Demag DC-COM 250 KG chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Hedpemqf Nfsfx Aldonr Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems available as well. Payloads from 125 KG to 1600 KG Please inquire for crane runway with your desired cantilever load and dimensions.

Condition: excellent (used), functionality: fully functional, Year of construction: 1991, machine/vehicle number: MIKA176/177/1177, Technical data: 1x Demag KBK 1 pillar jib crane SWL 125KG with Demag DC chain hoist Crane is available 3x!!! Load capacity at full outreach: 125KG Hjdpfx Asyzblwsldenr Height: approx. 3.15 m (NR176/177) - (NR1177: 3 m height) Underside of jib: approx. 2.6 m Outreach: 4 m Hook height: approx. 2.3 m Total weight: approx. 300KG with 125KG Demag DC chain hoist (125Kg - YOM 2010) Including pins, cable trolley, carriage, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, load capacities 80-5000Kg, please inquire See pictures Shipping by freight forwarding or pickup by appointment only

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: MIKA167/168, Technical Data: 1x Demag KBK 2 pillar-mounted slewing jib crane, SWL 125kg, with Demag DC chain hoist 125kg Crane is available 2x!!! Rated load at full outreach: 125kg Hnedpfx Ajyzblqjlder Height: approx. 3.5 m Underside of jib: approx. 3.3 m Jib outreach: 3 m Hook height: approx. 2.9 m Total weight: approx. 450 kg Equipped with 125kg Demag DC chain hoist Incl. pins, cable trolley, trolley, end cap, etc. Slewing range: 300°, connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Additional cranes available, capacity 80–5000kg – please enquire See pictures Dispatch via freight forwarder or collection by appointment only.

Condition: good (used), Year of construction: 1998, operating hours: 83,000 h, screw diameter: 50 mm, overall weight: 7,400 kg, Demag 150 tons Hnjdpet Dx Hbofx Aldjr Auger diameter: 50 mm Impact volume: 399 cc Shot weight: 360 g Opening path max: 500 mm Mold height min: 250 mm Mold height max: 560 mm (660 with WA) Max. distance between moldboards: 1060 mm (1160 with WA) Mold table size H*V: 750*750 mm Distance between tie bars H*V: 500*500 mm Max. tool weight: 1700 kg

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: TH2000MessraumRES, DEMAG KBK Crane System Overhead Crane Runway 9.3 x 5.3 m (Bridge travelling path approx. 5 m) The crane is also available in various other dimensions, multiple units in stock with elevated carriages. Load capacity / Lifting capacity: 500 KG Technical data of the system: Crane runway made from Demag KBK2 profiles with elevated carriage – crane girder is located between both running rails for maximum lifting height with internal power supply !! System is delivered complete: KBK profiles, profile connectors, carriages, end plates, drag chain (internal conductor rail system optional!) brackets/suspension elements etc. including Demag DK chain hoist, capacity 500 KG Crane is dismantled and immediately available Various cranes in stock Good condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarding or collection by prior arrangement only Demag KBK1, KBK2 and KBK3 profiles in stock! Other KBK systems with different capacities also available. Load capacities from 125 KG to 1600 KG Hsdpfjv Iai Nsx Aldonr Please request your required crane runway with load capacity and dimensions without obligation.

Condition: excellent (used), functionality: fully functional, Year of construction: 1986, machine/vehicle number: MIKA38016, Technical data: 1x Demag KBK 2 column-mounted slewing crane, SWL 500KG, with Demag DC electric chain hoist (250Kg - year 2007) Load capacity at full outreach: 500KG / 0.5t Height: approx. 3.55m Under jib: approx. 3m Outreach: 3m Hook height: approx. 2.65m Total weight: approx. 550KG With 250KG Demag DC electric chain hoist Incl. bolts, cable trolley, travelling gear, end cap, etc. Slewing range: 300°, connection 400V 16A The crane is disassembled and available immediately Item location: 75053 Gondelsheim More cranes available with load capacities from 80-5000Kg, please inquire See pictures Hsdpfox U Rbuox Aldsnr Shipping via freight forwarder or collection strictly by appointment

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 Hodpfoy D D S Ssx Aldsnr 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Total weight approx. 300 kg, connection to 400V 50Hz Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code