Used Dispensing System for sale (424)

Year of construction: 2022, condition: new, 1 x Niro-Tech SHM2 pass-through hygiene station, comprising of boot-wash, hand sanitising/disinfecting station and turnstile. The boot-wash features traditional rotating brushes which clean and disinfect work shoe / boot bottoms with automatic dispensation of disinfection / sanitising fluid. The hand-sanitising station automatically doses sanitising solution when hands are inserted in the specially designed sockets. Can be manufactured so as to run Right – Left or Left – Right depending on your factory requirements. Dimensions – 1620mm wide x 1080mm long x 1400mm high. Electricity – 400v, 50hz, 3 phase. Manufactured in AISI 304 stainless steel. Brushes can be chosen in blue, red or white colours. Nsdpfx Ashr Rqljh Eedc

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) Ndsdpfjibx S Nex Ah Eoc - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: excellent (used), Year of construction: 2024, S/S. COMPLETE TETRA PACK ICE CREAM PLANT. 1 x Complete Tetra Pak ice cream plant. All s/s. Latest technology. Includes gantry. Lift out: TBC This world-class 1500 litres per hour ice cream plant was housed in a state-of-the-art facility combining advanced technology, efficiency, and quality control to produce top-tier ice cream in an environmentally responsible way while remaining adaptable to new consumer demands and trends. Large, refrigerated milk silos dedicated to keeping ingredients fresh, smaller IBC storage for non-dairy. The ingredients would be carefully measured and dispensed into the production line to ensure consistency. After ingredients are measured, they would be transferred to a large high shear pasteurization machine to eliminate bacteria and improve shelf life while retaining the quality of the ingredients. This process happened in a controlled environment, with precise temperature and timing regulation. The ice cream mixture would then undergo homogenization, where it is passed through high-pressure systems to break down fat molecules and create a smooth, creamy texture. This is a crucial step to ensure that the ice cream has the perfect consistency and mouthfeel. Once the base mix is ready, flavours could be added. This could include natural fruit purees, chocolate, vanilla, or even exotic ingredients. There would be a separate line for adding inclusions like nuts, chocolate chips, caramel ribbons, or swirls. The flavoured mix would then be sent to freezing machines. These machines rapidly freeze the ice cream mix while continuously churning it to prevent the formation of large ice crystals. This process ensures the smooth and creamy texture that is characteristic of premium ice cream. Once the ice cream reaches the perfect texture, it would be dispensed into moulds, then quickly hardened in a blast freezer to maintain its integrity during storage. The plant has sophisticated software systems for inventory management, quality control, and tracking production. Sensors and automated systems would monitor temperature, consistency, and flavour levels at every step. A fully computer controlled CIP plant ensured consistent and continuous levels of hygiene throughout the plant. Ndodpfevzny Nsx Ah Eoc This world-class ice cream plant had a focus on sustainability.

Condition: defective spare-parts repository (used), ABSCIEX AB SCIEX API 4000 Mass Spectrometer General Information Model API 4000 Manufacturer ABSCIEX Category Mass spectrometer Description The AB SCIEX API 4000TM LC/MS/MS system uses the TurboIonSpray probe and the atmospheric pressure chemical ionization probe and the Atmospheric Pressure Chemical Ionization (APCI) probe to generate ions from liquid samples. The term LC/MS/MS used for the triple quadrupole series is a general term for the combined analytical processes of liquid separation and ionization. analytical processes of liquid separation and subsequent mass spectrometric analysis. Nodpevdb Sqjfx Ah Ejdc The device is configured to perform complex MS/MS analyses, but can also perform single MS scans (LC/MS) for less stringent analytical requirements. AB Sciex API 4000 The API 4000 LC/MS/MS system enables all MS/MS modes of operation for the complete characterization of biopharmaceutical compounds and the specificity required for new drug development. For pharmaceutical and pharmacokinetic samples, MS/MS provides the sensitivity and specificity required to analyze hundreds of samples per day without extensive sample preparation. For peptides and proteins, molecular weights can be determined with an accuracy of better than 0.01 % at 200 kDa. ( Only as spare part dispenser, because incomplete !! ) Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), The Nissei NA3348 is the combi soft serve ice cream and milkshake machine for locations with high demand for soft ice cream and large-volume milkshakes. This floor-standing machine is very user-friendly thanks to its 2 separate dispensing outlets. Brand: Nissei Model: NA 3348 Giant Combi Delta Horeca Model: 21129 Dimensions (WxDxH): 460x850x1600mm Njdpfx Ahow Ag Dho Ejdc Electrical connection: 400V

Condition: excellent (used), Year of construction: 2016, Automatic labeller STS S2-Zeta with two labelling stations, for equipping labelling and back labelling on two separate separate labelling stations. - Year of construction: 2016 - Capacity : 1'000 bts/h - for cylindrical bottles, Ø 60 à 110 mm - Thermal head - Crimping head - Speed variator for the crimping head - Synchronised capsule dispenser with chute - Machine on wheels with brakes - 2nd pass photocell for label detection - Photocell in the output for accumulation - Drive, deflection, accumulation table 500 x 800 mm - Machine in very good condition Ndedsv S Trfjpfx Ah Esc

Year of construction: 2022, condition: used, functionality: fully functional, conveyor belt length: 1,500 mm, machine/vehicle number: 24T20030058, Automatic Labeling Machine with Belt Conveyor – Self-Adhesive Labeling System For sale: a complete automatic labeling set comprising a belt conveyor and an integrated labeling module. The equipment is designed for applying self-adhesive labels to cylindrical, rectangular, or irregularly shaped packages (e.g. cups, jars, bottles, containers). The system is suitable for the food, cosmetic, chemical, and pharmaceutical industries. Technical Specifications: - Frame: Steel + aluminum, stable structure on adjustable feet - Belt Conveyor: PVC belt, adjustable side guides - Labeling Module: Automatic label dispenser (roll-fed), safety cover with inspection window - Control Panel: Control buttons + emergency stop (STOP) Ndedpfexfr Tqjx Ah Eoc - Drive: Electric motors with gearboxes - Label Handling: Self-adhesive labels on rolls - Capacity: Up to several hundred pieces/hour (depending on label and package size) - Application: Cylindrical and flat products Compatible equipment for this machine available here: - Automatic labeling machine for containers from 25 ml and similar sizes - Automatic capping and cap applying machine - Stainless steel cap feeder - Automatic labeling machine with belt conveyor – self-adhesive labeling system - Stainless steel rotary infeed/outfeed table for production line Condition: Used machine, complete, in good technical condition. Ready for operation after basic setup and connection. TSC TTP-2410MT, 8 dots/mm (203 dpi), RTC, display, TSPL-EZ, USB, RS232, LPT, Ethernet label printer, industrial model, thermal transfer, direct thermal, 8 dots/mm (203 dpi), max. media width: 116 mm, max. print width: 104 mm, max. roll diameter: 208 mm, max. speed: 356 mm/s, USB, RS232, parallel, Ethernet, update interface, SD slot, TSPL-EZ, RAM: 128 MB, Flash: 128 MB, incl.: real-time clock, LCD display, incl.: USB cable, power supply unit, power cable.

Year of construction: 2008, condition: excellent (used), Telstar Glove box isolator Dispensing Isolator with the following options: Full stainless steel construction in SS316 3 Gloves 3 wall power sockets 230 Volt (UK plug) Sluice pass box with auto locks Descending bottom with drain and valve light in workspace and sluice Nsdpepvhkpjfx Ah Esdc 3 x Magnehelic pressure gauge for: sluice , workspace and filter pressure Containment breach alarm Work space L 1300 mm W 640 mm H 800 mm Sluice door opening W 310 mm H 520 mm Built in filtercartridge Built in exhaust fan (frequency controlled) Exhaust pipe 100 mm with flange 230 mm Power 400 V 3 fase+N On stainless steel frame with casters Fully tested and in excellent condition

Condition: new, Powerful Performance Without Interruptions The Meijer SR750B is equipped with a powerful battery pack and large clean and dirty water tanks of 110L and 125L, allowing you to scrub up to 4,500 m² per hour. This scrubber-dryer can tackle large areas without the need for frequent stops. Water flow and brush pressure are easily adjustable, making it ideal for varying levels of dirt. The innovative 99 cm V-shaped squeegee efficiently vacuums all dirty water, leaving your facility floors spotless and reducing the risk of unsafe situations. Suitable for Light and Heavy Soiling The machine comes standard with 2 white disc brushes, each with a diameter of 39 cm. Facing extremely heavy dirt? Consider using our patented Green Grit brushes for even cleaner results. The Stop&Go system detects when the machine stops during operation and automatically halts water and detergent dispensing. Smart Maintenance and High Safety All parts requiring cleaning after use are clearly identifiable by their yellow color coding. The Meijer SR750B also features convenient indicators for battery and water levels and a fully electric display with diagnostic data. During the design phase, considerable attention was given to various safety features: the machine is equipped with anti-slip wheels, an automatic parking brake, and an emergency stop. Thanks to its high maneuverability and excellent cleaning results, the Meijer SR750B is widely used in warehouses, shopping centers, healthcare facilities, and industrial environments. The Meijer SR750B comes standard with, among other features: - Speed reduction system for cornering, - Easy replacement of squeegee rubbers, - Flexible removable filling hose, - Water level and battery indicators, Ndedpfxsnwnzqj Ah Eec - Color-coded parts for daily maintenance, - Anti-slip and non-marking wheels. Other Specifications: - Working capacity: 4,500 m²/h, - Battery operating time: 3 hours, - Scrubbing width: 75 cm, - Squeegee width: 99 cm, - Clean water tank capacity: 110 liters, - Dirty water tank capacity: 125 liters, - Number of disc brushes: 2 (Ø39 cm), - Power source: 24V battery, - Maximum speed: 6 km/h, - Brush pressure: 30 - 60 kg, - Drive: Front-wheel drive, - Sound level: < 70 dB(A), - Weight (ex. batteries): 225 kg, - Weight (incl. batteries): 381 kg, - Dimensions: 149.5 x 77 x 132 cm Want to know more? Would you like to learn more about the Meijer SR750B or see it in action? Feel free to contact us—our advisors are happy to help.

Condition: excellent (used), AdBlue refueling truck Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle operation: with the MOBILUS-AdBlue, the safe refueling of your vehicles is possible in a safe and economically efficient manner. The MOBILUS AdBlue mobile refueling system complies with all relevant technical and legal regulations and is therefore often used in research and development projects. Convince yourself of the quality of this mobile urea refueling device. Technical data: Manufacturer: Rietbergwerke GmbH & C0. KG Type: HT-Mobilus 200 AdBlue Year of construction 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135cm Empty weight: approx. 260kg Useful volume tank: approx. 175 liters Power supply: Connected load: 3.0KW Supply voltage: 400/230V / 50 HZ NPE Fuse protection: 16A Heating: Connected load: 4.0KW Supply voltage: 400V Delivery pump: Output: 0.75KW Supply voltage: 400V / 50 HZ Further technical data: Suction and circulation pump: Power: 0.4KW Supply voltage: 230V / 50 HZ Dispensing valve: Volume flow: max. 40l/min Operating pressure: 0.5 - 3.5 bar Control range: Volume flow: 3.5 l/min. - 45.0 l/min Temperature: 15°C - 45°C Frequency converter: 1,800 1/min BNC sockets: Output: 0 - 10V Operating temperature Operating temperature: max. 45°C Storage temperature: down to -30°C Materials Container: LDPE All other components in contact with the product: LDPE or stainless steel Ndedpsrp Enmsfx Ah Ejc Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Ndedew Dd Rzopfx Ah Eoc Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Year of construction: 2016, condition: ready for operation (used), Two similar Stanley riveting punches are available. Both machines include rivet dispensers ERF 23 and 23.1. An on-site inspection is possible. Ndjdown Iabepfx Ah Eec

Condition: used, functionality: fully functional, power: 4 kW (5.44 HP), gearing type: hydrostat, fuel type: gasoline, color: orange, number of seats: 1, Year of construction: 2002, Road Marking Machine: + Graco + LineLazer II 5900 + Airless pump + Spray gun + Line guide + Bead dispenser + Honda GX160 engine, 5.5 HP + Year of manufacture: 2002 LineDriver: + Green + Zindel Variozet 3 + Honda engine with electric start Ndedpfjw T Skgjx Ah Ejc + Hydrostatic drive + Hand throttle Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: good (used), Eurolube A11740 Lubrication Pump & Filter Graco LD Series Tank Filling Pump Orion Electronic Oil Dispensers x 2 Visual Oil Level Indicator Approx. 250 l. Holding Tank Ndodot Rgugjpfx Ah Eec

Condition: excellent (used), Perconta Contomat High-Performance SB Coin Settlement Terminal Contomats are relieving bank employees of more and more routine tasks. Njdoivd E Tepfx Ah Ejdc The trend that set the standard with automatic cash dispensing and statement printing continues in coin processing with the Contomat. If you are looking for a solution for the customer-oriented deposit of hard cash, the Contomat self-service terminal is the perfect choice. You can find more coin processing terminals in other sizes - new and used - in our store! International shipping costs on request!

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 4,900 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, loading space volume: 24 m³, color: white, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, RENTAL PURCHASE * LEASING * FINANCING AT TOP CONDITIONS Renault Master 3.5t L3 2.0 dCi 170 E-VI Flatbed tarp 4900L 2200W 2300H Equipment: * Traffic light assistant * Power take-off socket on the engine, * Automatic air conditioning, * Exterior mirrors with wide arms * LED cabin lighting * Driver and passenger airbags, * Heated front seats * OpenR Link 10'' multimedia system with integrated Google services (navigation) * Heated windscreen * Brake pad wear indicator, * Airbag switch * Passenger with reinforced battery Airbag package (FAB02 SABG0 ABCXL) Driver and passenger airbag, airbag switch for the driver-side airbag passenger SAFETY – ADAS – SPECIALIZED * Tire pressure monitoring system * Rain and dusk sensor, Nedjvu N S Hopfx Ah Eodc * Lower engine cover made of steel, * 'Wide View' interior mirror, * Spare wheel, * Full standard tires * Lane keeping system * EMRD3 approval criterion * Low beam and the LED daytime running light system * RCall * Rear parking sensors * Driver fatigue warning system, * Traffic sign recognition system * Emergency braking system * Side marker lights * Central locking * ABS system * Cruise control with limiter MULTIMEDIA * Wireless charger for smartphones COMFORT - DRIVER CABIN * Side mirrors, electrically adjustable, heated, manually foldable, * Seat belt height adjustment, * Folding key * Plastic steering wheel with two-dimensional adjustment, * Central rearview mirror * Front electric windows with impulse switch * Driver's seat with armrest and lumbar adjustment * 2-seater sofa 'Mobile Office' with storage space * 12V socket in the cabin * Sliding passenger compartment * Wall on the cabin side lined with carpet * Closed glove compartment on the dashboard, * Analog driver displays with 3.5'' TFT monochrome display CARGO AREA * Steel partition with window * 16-inch steel wheels * Flatbed tarp 4900mm x 2200mm x 2300mm (LxWxH) * Auxiliary heater * 400 mm long sides made of anodised aluminum – split, removable center posts. * The rear and side walls can be opened and dismantled, the side wall locks are wide * Floor made of waterproof, non-slip plywood (standard 15 mm). * Roof construction made of tubes – placed in rubber sleeves. * Side deck for quick loading. * Cover made of 670 g/m2 material, color silver with a skylight, closed with a rope. * Plastic mudguards with splash guards. * Entry step on the rear side. * Under-run protection strips made of anodised aluminum profile. * LED side marker lights – according to KRD. * Toolbox 750×360×350 * Water container with soap dispenser * TopSleeper LAMICO sleeping cabin * ALU height adjustment 300 mm + tension curtain on the driver's side (pneumatically assisted adjustment, aluminum frame, uniform rods, aluminum pipes) * Number of load securing holders, 5 per side * Pneumatic cushions with compressor * Additional battery when installing additional auxiliary heater, mounted in toolbox Stock vehicle immediately available Our special service for you: * Service history maintained by contractual partners and master workshop * Winter tires available for an additional charge * Insurance warranty possible up to max. 36 months for an additional charge * We are happy to buy your used vehicle at a fair price! * Financing mediation from 6.99% with and without down payment up to max 96 months, bon

Condition: new, -Dimensions: 420x570x530mm -Boiler capacity: 8L -Ergonomic and easy-to-use steam and hot water taps -Automatic cleaning cycle -Voltage: 230V/50-60Hz Ndoy Tdxsw Eltyeugea -Power: 3200W -Weight: 46kg The Futurmat Rimini occupies just 58 cm / 23 inches of countertop space; this machine is engineered to be compact without compromising performance. This robust machine incorporates a range of features, making it an extremely versatile coffee machine. Includes a steam wand, hot water dispenser, two group heads allowing up to 4 coffees at a time, programmable automatic coffee dosing, and an adjustable support for small cups. The large, heavy-duty touchpads make operation simple for the barista. The stainless-steel wire drip tray ensures serving cups remain clean. These machines are built to last, with no plastic in the body panels. Ndodsw Eltyepfx Ah Esc Features: -Electronic coffee shot dosing for consistent coffee quality for your customers. -8L boiler capacity Technical Specifications: -Large, robust, and sensitive-touch keypads -2kg brass group heads featuring E61 brewing and extraction technology for optimal espresso quality -Stainless-steel wire drip tray helps keep cup bases clean -Teflon-coated, limescale-resistant group injectors, heat exchanger inlet fitting, boiler inlet fitting, and flow meters help minimize the risk of equipment failure -Group exhaust solenoids feature the highest quality rubber seals -Powerful, durable 120-watt pump motors -No plastic used in the body panels – these machines are built to last -8-litre boiler with automatic fill and high-efficiency 3kW element -Pump and motor integrated within the machine -Includes safety valve and thermostat -Copper boiler with independent thermo-syphon heat exchangers for each group head Installation Requirements: Hard wired to single-phase 13A power supply with a surface-mounted isolation switch. 15mm mains water supply terminating in a ¾ inch ball valve – 38mm drain outlet with trap. The listing was translated automatically. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2014, A Weber label dispenser for pre-printed self-adhesive labels is available. Inner core diameter: 73mm, max. label roll diameter: 300mm, min. label dimensions X/Y: 10mm/20mm, max. label dimensions X/Y: 120mm/300mm, labeling capacity: 2500 labels/h, wipe-on speed: 50m/min, tamp-on speed: 120 labels/min, accuracy: +/-0.8mm, machine dimensions X/Y/Z: approx. 720mm/310mm/590mm, weight: approx. 25kg. Documentation available. On-site inspection is possible. Ndedpjwnr Icjfx Ah Ejc

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Ndodpeugpwnsfx Ah Eoc Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Ndjdpjwx Aadsfx Ah Ejc Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 2007, Palletiser Solema Cartesio Year: 2007 Description: - Automatic setting - Colour monitor with touch screen Ndodpfx Ahevcmxyj Esc - Infeed conveyor - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Njdpfx Aowa Tixjh Esdc

Condition: ready for operation (used), Year of construction: 1986, A Brückner stenter frame, perfectly suited as a spare parts dispenser, is available. Steam pressure: 2 bar, air pressure: 10 bar. On-site inspection is possible. Ndodswhy S Nepfx Ah Eoc

Year of construction: 2009, condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Ndjdsu Afz Djpfx Ah Eec

Year of construction: 1995, condition: ready for operation (used), A laser cutting and punching machine Trumpf with an unknown defect (linear amplifier in order) is available. Press force: 220kN, laser power: 1500W (1.5kW), max. punching diameter: 76mm, max. workpiece dimensions X/Y: 2585mm/1280mm, max. sheet thickness mild steel/stainless steel/aluminum: 8mm/6mm/4mm, max. workpiece weight: 200kg, part dispenser X/Y: 500mm/500mm, magazine positions: 18, machine dimensions X/Y/Z: approx. 8000mm/7500mm/2400mm, weight: approx. 16000kg. On-site inspection is possible. Ndsdjwftdgjpfx Ah Eoc