Used Dmu 60 E for sale (273)

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 2731660/C 0000, functionality: not functional, operating hours: 44,050 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Bjdpfxorl Rwxe Ab Dowt Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A Bsdjr Hbf Ejpfx Ab Dswt About the machine : We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel Maho DMU 50M with line control TNC 124 from Heidenhain TOP condition !!! Technical data: >> Year of construction 1998 >> Heidenhain control TNC 124 >> Traverse paths X500/Y400/Z400 >> C and B axis manual with display >> Speed 20- 4500 1/min >> Feed 5000mm/min >> rapid traverse 5m/min >> Tool holder SK 40 >> Table Ø700x500mm >> swivel range +95° /-10° >> electronic handwheel >> Weight 2800Kg >> Machine dimensions approx. 4.0 m x 2.5 m height 2.6 m >> Coolant device >> Power connection 400V 32A About the machine : Bwsder Hbf Topfx Ab Det We are offering a Deckel Maho DMU 50M universal milling machine with a Heidenhain TNC 124 line control in very good condition. The table is manually (digitally) adjustable by two additional axes B and C. A very easy to operate control, it can enter and approach positions, deep and thread drilling, drilling patterns, hole circles, hole rows and rectangular pocket milling. Programs can be entered and read out via an interface. The Heidenhain line control makes work easier and even more precise. The milling machine was used in a large company for training purposes. Take the opportunity to inspect and try out the machine under power on site.

Condition: good (used), Year of construction: 2008, 1 used vertical machining center Manufacturer: Deckel Maho Model: DMU 80 monoblock Year of manufacture: 2008 Control: ITNC 530 Technical specifications X travel: 980 mm Y travel: 630 mm Z travel: 630 mm Control: iTNC 530 Total power requirement: 10 / 15 kW Machine weight approx.: 9.5 t Space requirements approx.: 4*4*2.5 m Additional information Equipment: Electronic handwheel Operation mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-tool magazine Fixed table 1250 x 700 mm Chip conveyor Bwsdpfx Abexa Euds Djt Coolant system

Condition: good (used), Year of construction: 2004, operating hours: 6,293 h, functionality: fully functional, For sale is a machining centre from the manufacturer Deckel Maho, model DMU 50. The machine is in good condition and can be inspected on site. Bedpoyghqvefx Ab Dowt

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Heidenhain TNC 310 cnc control C and B-axis manual with display swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Bwjdpfx Aey E Iztjb Dot

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, With Heidenhain iTNC 530 CNC control Year of manufacture: 2004 Travel paths: X 800 Y 600 Z 700 Spindle speed range: 0 – 12,000 rpm, stepless (SK 40) Including the following accessories: NC rotary tilting table Ø 630 mm Swivel milling head (horizontal + vertical) Universal tool changer with 60 magazine slots as double gripper (SK 40) Full safety enclosure with sliding doors and interior lighting 50 pcs. SK 40 tool holders ICS – 40 bar Chip conveyor Rotoclear 3D measuring probe Heidenhain Bedpoym Rnkjfx Ab Dswt Electronic handwheel Operating modes 3 + 4 3 height-adjustable machine feet Operating manuals THE MACHINE COMES FROM AN INSTITUTE AND IS IN EXCELLENT CONDITION!! POWER-ON HOURS: 29,496 hrs. PROGRAM HOURS: 10,050 hrs.

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe Bwodpfxozqv A Ts Ab Dot

Condition: excellent (used), Year of construction: 1996, operating hours: 9,700 h, DMG Vertical Machining Center Bwedpfoyvzq Nox Ab Djt Model: DMU 50 V Year of manufacture: 1996 5 axis Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Spindle taper: BT 40 Spindle speed : 8,000 rpm Tools in magazine: 24 piece Control: Deckel Maho Mill Plus Spindle hours: 9700 Interface: RS-232 C 30 tool holders

Condition: ready for operation (used), Year of construction: 2001, Control system: Heidenhain TNC 430 MillPlus, length: 4073mm, width: 3323mm, height: 2375mm, weight: approx. 9.5t, an on-site inspection is possible. Bedpszk Naxefx Ab Dswt

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling machine Condition: Used Year of manufacture: 2002 Bwedpfx Ajzhlq Ieb Dst Operating hours: 34,739 hours Program running time: 6,435 hours Technical data Tool holder: SK 40 Number of tool positions: 16 Travel ranges X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Table size: 700 mm x 500 mm, rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: total 17 kVA Weight: approx. 3,000 kg Dimensions L x W x H: approx. 2100 m x 1520 (without peripherals) approx. 2140 mm

Condition: good (used), Year of construction: 1998, functionality: fully functional, CNC Control: HEIDENHAIN MillPlus X mm: 600 Y mm: 700 Z mm: 550 B mm: -30 / +180 C degrees: 360 Number of pallets: 5 Table dimensions mm: 630 x 500 Table load capacity kg: 600 Cutting feed rate mm/min X, Y, Z: 10,000 Maximum rapid traverse rate m/min X, Y, Z: 30, 30, 30 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: 40 Torque Nm: - Bjdpozbcy Iofx Ab Dswt Tool changer type: Chain Positions in tool changer: 60 Maximum tool diameter: mm: 100 Maximum tool diameter with adjacent positions empty: 160 Maximum tool length mm: 350 Maximum tool weight kg: 10 Coolant tank capacity l: 750 Coolant through spindle: Yes Equipment: Chip extractor included 5-position automatic tool changer included Coolant through spindle included New spindle, 2024

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Model: DMU 70VL Year of manufacture: 2001 Bwodpfxeyk S Hpe Ab Det

Condition: excellent (used), Year of construction: 2002, CNC Machining Center DECKEL MAHO DMU 80 T Year of manufacture: 2002 Control: Heidenhain iTNC 530 Spindle: replaced on 14.11.2018, approx. 17,000 hours Technical data: Bodpfx Ajylk Sysb Dewt Travel paths: X: 880 mm Y: 630 mm Z: 630 mm Controlled B-axis in milling head: -15° to 90° Spindle speed: 12,000 rpm Tool changer capacity: 32 positions Tool holder: SK 40 Coolant system: available

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Bsdpozc Dzisfx Ab Dowt Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 30,195 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,080 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 710 mm, controller manufacturer: HEIDENHAIN, controller model: Millplus IT, number of slots in tool magazine: 32, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details. • Axes: 5-axis (X, Y, Z + A, B) • Condition note: Spindle collided with workpiece and is currently seized. Advised that it can be rebuilt/reinstalled by a specialized service company; estimated parts cost approx. €7,000. Additional equipment Bwedpfjzlgxusx Ab Dst • Automation: Erowa Robot Easy system with 12 pallet stations • Workholding: Erowa zero-point clamping system (extensive set) • Rotary/tilting table: Nikken CNC rotary tilting table (fully refurbished in 2016) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, Equipment: chip conveyor, DECKEL MAHO DMC 1035 V – Vertical Machining Center – Year of Manufacture 2007 For sale is a DECKEL MAHO DMC 1035 V CNC machining center in well-maintained condition. Bwedpfx Abszkmq Ij Dst Technical Data * Manufacturer: DECKEL MAHO * Model: DMC 1035 V * Year of Manufacture: 2007 * Control System: Heidenhain iTNC 530 * Travels (X/Y/Z): 1,035 × 560 × 510 mm * Table Size: 1,200 × 560 mm * Max. Table Load: 1,000 kg * Tool Holder: SK40 * Spindle Speed: up to 10,000 rpm * Tool Magazine: 30-position * Rapid Traverse: up to 30 m/min * Machine Weight: approx. 4,500 kg * Electrical Connection: 400 V / 50–60 Hz * Power Consumption: 22 kVA Equipment * ✅ Heidenhain iTNC 530 CNC control system * ✅ Electronic handwheel * ✅ Tool changer * ✅ Coolant system * ✅ Direct path measuring systems * ✅ Made in Germany The machine impresses with its robust design, high precision, and reliability. It is ideal for single-part and series production, as well as for demanding milling operations. Location: Germany Free loading.

Condition: used, Year of construction: 2001, x-travel 600 mm Bwodpfxezdvgle Ab Dst y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 600 kg, number of slots in tool magazine: 60, swivel angle C-axis (max.): 360 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle mount: SK40 Travel range X-axis: 600 mm Travel range Y-axis: 560 mm Travel range Z-axis: 560 mm Bwsdpfxozpxd Re Ab Det Swivel range B-axis: 360° Number of tool positions in the magazine: 60 MACHINE DETAILS Control system: Siemens Number of pallets: 2 Pallet size: 400 × 500 mm Permissible pallet load: 600 kg Machine weight: 10,500 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, For sale is a Deckel Maho machining center, type DMU 50 M with path control and manual rotation axes The machine is in very good condition, fully functional and ready for immediate use. Particularly noteworthy is the possibility of working in an open cabin Technical data: Year of construction: 2002 Control: Heidenhain TNC 124 X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Feed speed: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360 ° (mechanical) Swivel range: +90/ - 15 ° (mechanical) Max. load: 200 kg Space requirement: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1520 x 2,200 mm Weight: 2,600 kg Additional tool holders available on request Transport and loading can be organized on request, at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Bwedpfx Abju Unh Ij Dst Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Bwedou Hf Ryepfx Ab Dot

Condition: excellent (used), Year of construction: 2002, 5-axis CNC machining center 2002 Control system: Heidenhain iTNC 530 Bwjdpfewn A Slsx Ab Det Technical data: x-axis travel: 880 mm y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Tool holder: SK 40 (ISO 7388IIB) Swiveling: B: 103° Work table: Table clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotating: C: 360° Max. table load: approx. 500 kg T-slots: 11 x 14 mm x 63 mm Tool magazine: Number of tool positions: 32 (2 x 16) Tool holder: SK 40 (ISO 7388IIB) Max. tool diameter: 80 / 130 mm Max. tool diameter with free adjacent compartment: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430 MHaidenhain TNC 430 M, spindle speed (max.): 8,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information. • Rapid traverse (X/Y/Z) 12 m/min • Machining capability: 5-axis machining via manual swivel/rotary table axes • Cooling system: External coolant supply; capacity 80 liters; coolant used Alusol SL 51 XBB • Tool system: Tool magazine with 16 tool positions Technical Specification Bodpfjydk Npjx Ab Dowt Taper Size SK 40

Condition: used, Year of construction: 2000, operating hours: 27,825 h, functionality: unexamined, machine/vehicle number: 1093 0001613, Equipment: documentation/manual, used DMU 80 TNC 430. According to photos Bwjdpfx Aot Skhysb Dot Without tools or vice complete operating instructions Reviewed annually. Bought used. 1-shift operation Always avaliable

Condition: good (used), Year of construction: 1998, Deckel Maho DMU 103V Year of manufacture: 1998 Control system: - Siemens 810D (Shopmill) Main spindle: - max. 8000 rpm Travel ranges: - X-1000, Y-600, Z-600 mm Work table: - Clamping area 1200 x 600 - max. table load 800 kg Tool changer: - 24 magazine positions Availability: Bwjdpfxozwg E Ej Ab Dot - Immediate