Used Dosing Device for sale (12,604)

Condition: used, functionality: fully functional, Hydac FCU2210 Fluid Control Unit Hydraulic Service Unit with Accessories Fsdpfx Aaev I Tdge Eefw # 7044

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 Fjdpfxjxqxt Io Aa Eofw - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC Fjdpfjxqxw Tex Aa Ejfw - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: D5830, operating hours: 381 h, 2016 Rowa Vmax Pharmacy Robot The system is in perfect working order. It has barely been used, as our many different packaging options are not suitable for such a storage system. The system is operational and in top condition with very low mileage. The last service was performed today, and there is no maintenance backlog. Fjdpfowccnpex Aa Eofw Further information available upon request.

Condition: good (used), functionality: fully functional, Manufacturer: Colortronic Type: CSE Power: 0.8 kW Equipment: Stainless steel lance with suction hose Fjdsyryl Nepfx Aa Esfw

Condition: good (used), functionality: fully functional, Manufacturer: SHINI Model: SAL-3U-CE Power: 1.15 kW Ffsdoyryliepfx Aa Eow Equipment: Stainless steel lance with suction hose Two units available Price: 350 EUR per unit

Condition: excellent (used), functionality: fully functional, power: 1.1 kW (1.50 HP), Motan material conveying unit, type MES 50, power 1.1 kW, fully functional. Ffsdpfxjyryihj Aa Eow

Condition: excellent (used), functionality: fully functional, power: 0.8 kW (1.09 HP), Small Motan material conveying unit Power: 800 watts Ffedpfx Ajyryh Dea Esw Fully functional

Year of construction: 2015, condition: like new (used), functionality: fully functional, machine/vehicle number: 585, Various "lifting trolleys" for feeders, for example valid for various machine types: BEC300,BEC500,B1240,UPS1070,B1880,UPS 1030,UPS1040,etc. Ffjdpjumtc Aefx Aa Eow The devices can also be useful for other applications. The year of manufacture may vary, all devices are as good as new and have never been in use.

Condition: like new (used), functionality: fully functional, As-new twin-screw volumetric feeder Ffsdpsyfm Epjfx Aa Eow As shown in the photos, the unit features: • Twin screws with approx. 45 mm diameter • Integrated paddle mechanism (agitator) inside the hopper • Rectangular hopper with stainless steel liner • Driven by a 0.55 kW electric motor The feeder is in as-new condition and fully functional. Ideal for powders, granulates, or difficult-to-flow bulk materials.

Year of construction: 2010, condition: used, Additional title: 10 hl brewing system with grist mill, wort cooling and hot water tank Cast wort capacity: 1000 l Current: 17 A Fsdev Av S Nspfx Aa Eefw Voltage: 400 V Frequency: 50 Hz Operation / Control: Simatic Multi-Panel, Siemens CPU Features: Grist mill, mash tun, lauter tun, wort kettle, whirlpool, plate heat exchanger, wort aeration, hot water tank, lauter pump, wort cooling pump, hot wort pump, Pipework, valves, accessories, controls

Condition: used, length 1000 mm width 570 mm height 1200 mm weight of the machine ca. 0,4 t dimensions of the machine ca. 1,x0,6x1,2 m Fjdpfsh Ig Tpox Aa Ejfw used angle plate in good condition with several bores for clamping.

Condition: used, Year of construction: 1970, power capacity 0 kW tool adaptor 0 total power requirement 0 kW Fsdpfx Aaou Sbfds Ejfw weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Dust suction hood 160 mm Motor output 1,5 kW Fodpfxeyi Ht Uj Aa Eofw Dimensions (L/W/H) 1.220 x 650 x 3.270 mm

Year of construction: 2022, operating hours: 25 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22/B-001-0194, Push-off device for Euro pallets Example: Transferring materials from wooden pallets to cleanroom pallets Ffjdpfeykr Akjx Aa Eew

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally Ffjdpfx Aoyhq A Dsa Esw - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: used, Hydraulic machine vice, high-pressure clamp KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Fodpfxsd Amwis Aa Eefw Opening width: max. 373 mm Guideway height: 140 mm - 2 clamping ranges adjustable via locking pin - Swivel base plate Dimensions (L x W x H): 900 x 400 x 210 mm Net weight: 125 kg Good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG Fjdpfx Ajpy Uzyoa Esfw - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Ffedpsl Hx Rdjfx Aa Esw

Condition: used, Year of construction: 2021, Overview  This inline dosing system was manufactured in 2021 by AGATHA (Italy). The AGATHA PRO is a compact automatic unit for precise dosing of liquid stabilizers such as Gomasol and Estabicel in wine production. It can be integrated directly into bottling or filtration lines and ensures accurate, homogeneous dosing through its flow-controlled injection system. The machine is in good condition and ready for use. Technical data  Application: Dosing of liquid stabilizers in winemaking Structure: Stainless steel AISI 304 Dimensions (L × W × H): 160 × 60 × 80 cm Weight: 140 kg Control: Touchscreen with dosing software Power Supply: 230 V, ≈500 W Features: Flow sensors, alarms, IP65 protection, easy line integration Ffsdjyb Tafepfx Aa Eow

Condition: excellent (used), Year of construction: 2017, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device was used for housing surface testing as the type describes and is in good to very good condition Year of manufacture: 2017 Weight: 2,500 kg The offer includes the components shown as well as computers and software Loading & or shipping possible for an additional charge Ffsdpfsmfty Hex Aa Ejw Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Z-axis: 500 mm, For sale is a presetting device from the brand Garant, model VG1. The measuring system is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2010 Measuring range X-axis: 400 mm Measuring range Z-axis: 500 mm Fodexf T R Rspfx Aa Eefw Measuring accuracy: 1 μm Spindle mounting: SK50, SK40, VDI40, VDI30 Transport and loading can be organized throughout Europe upon request and for an additional charge. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer -Number: 7 available Fodpfx Asb A Ivzsa Eofw -Price: per piece

Condition: like new (used), Tower Clamping System TS 125 Magnum Jaw width: 125 mm Clamping ranges: 1 x 476 mm 2 x 226 mm 4 x 108 mm Height: 780 mm Clamping stroke per clamping slide: 64 mm Clamping force: 40 kN Price: €7,850.00 + VAT Position 2 4 pcs. hydraulic vices Jaw width: 125 mm Length: 400 mm Price per unit: €850.00 + VAT Price for 4 units: €3,000.00 + VAT Position 6 Preci Tool NC, type 125 Jaw width: 125 mm Length: 430 mm Only 1 fixed jaw Price: on request Position 8 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Length: 430 mm Price: €850.00 + VAT Position 9 HILMA machine vice mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Length: 550 mm Price: €900.00 + VAT Position 10 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Length: 380 mm Price: €650.00 + VAT Position 11 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 40 daN Jaw width: 125 mm Length: 430 mm Price: €850.00 + VAT Position 12 HILMA machine vice with rotary base mechanical/hydraulic Clamping force: 50 daN Jaw width: 160 mm Length: 620 mm Price: €1,050.00 + VAT Fsdpfsic Rnuex Aa Esfw Position 26 HILMA machine vice (Trade Fair Version) Jaw width: 125 mm Length: 430 mm Price: on request Position 28 HILMA machine vice mechanical/hydraulic Clamping force: 25 daN Jaw width: 100 mm Length: 570 mm Price: €700.00 + VAT Position 32 Angle plate Clamping surface: 160 x 420 mm Price: €150.00 + VAT Position 33 Angle plate with HILMA vice Jaw width: 125 mm and force measuring cell Price: €450.00 + VAT

Condition: new, functionality: fully functional, New device Enmair Electro-pneumatic sprue picker ER available immediately from stock Ffjdpfx Aasr A D Ito Esw ER series type 650 Application range of 5 ton injection molding machine Horizontal travel 650 mm Vertical travel 125 mm Swivel angle 5 Gripper angle ° Lifting weight approx. 3kg Bracket on the back enables easy adjustment of the Swivel angle to the right / left, as required Required operating air pressure 5 - 7 bar 220V 50 Hz Device can be offered with Euromap 12 or Euromap 67 plug, depending on the pre-installation on the injection molding machine. User interface: English, Dutch