Used Double End for sale (17,457)

Condition: used, mileage: 87,500 km, power: 105 kW (142.76 HP), first registration: 04/2019, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Dodpfezzgtdex Aggjwb 13-pin trailer socket, armrest, driver and passenger door, passenger-optimized center console (without storage compartment in the center console on the right), entry handle on the rear pillar on the right, chassis: stabilization level I, vehicle without lowered suspension, wooden floor in the cargo area, cable duct on the rear portal, cable duct on the side wall, marker lights on the side, multimedia system MBUX (7" touchscreen), navigation system for multimedia system MBUX, crossbar with integrated step, smoker's package, spare wheel with road tires, spare wheel holder under the end of the frame including jack, reversing camera, seats in the cab: double passenger seat, lining in the cargo/passenger compartment: high wood (up to the roof), jack Additional equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the instrument panel on the passenger side, adaptive brake light, airbag on the driver's side, anti-slip regulation (ASR), display for washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior temperature display, brake assist, headliner in the cab, automatic headlight activation, entry handle for sliding door on the cargo compartment partition, electronic brake-force distribution (EBV), driving assistance system: side wind assist, rear door (opening angle 180 degrees), body/superstructure: high-roof standard van, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, continuous cargo compartment partition, steering wheel (steering column mechanically adjustable), headlight range control, Mercedes-Benz emergency call system, engine 2.1 liters - 105 kW CDI CAT, wheelbase 3665 mm, low emissions according to emission standard Euro 6, sliding door cargo/passenger compartment right, safety belt system with warning system (driver's side), seat cover/upholstery: fabric, seats in the cab: driver's seat adjustable, fleece battery 70 Ah, service interval display Assyst, heat-insulating glazing, permissible gross weight 3.50 t. Subject to prior sale, errors and changes.

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, For sale: Fenstek ADS550×5000 CNC-controlled double-head cutting saw from 2019 for the precise cutting of aluminum profiles. The machine is suitable for series production of profiles for windows, doors and facade systems. The two saw heads can operate independently or synchronously. The moving saw head is automatically positioned via a servo system. Key benefits: - Fully CNC-controlled - Two saw heads operating independently or synchronously - Automatic servo positioning of the moving saw head - Automatic height measurement system for precise cuts below 45° - Touchscreen operation - Integrated label printer for product identification and traceability - Infinitely adjustable saw feed - Heavy and stable machine bed Technical specifications: - Power supply: 380–420 V / 50 Hz - Total power: 5.5 kW - Saw motors: 2 × 2.2 kW - Saw blade diameter: 550 mm - Maximum cutting length: 5,000 mm Dwsdsx R U Epepfx Aggjb - Minimum cutting length at 90°: 360 mm - Cutting angles: 45° and 90° - Repeat accuracy: ±0.1 mm - Air consumption: 60 l/min at 0.5–0.8 MPa A complete double-head cutting saw for companies that want to process aluminum profiles quickly, reproducibly and accurately.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 2,000 kg, total length: 253,000 mm, total height: 7,500 mm, clearance between the columns: 2,700 mm, shelf height: 7,500 mm, number of shelf rows: 10, frame height: 7,500 mm, load per truss pair (max.): 2,000 kg, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racking, including 4 double rows and 2 single rows (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, load capacity 2000 kg. Dodpfxezxwrlj Aggswb - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, screws - 400 floor anchors (ZZBA1210) - 720 single beams (T27114 - RAL2008) - 2 end-of-aisle protectors / impact protectors (ZRS40901) - 4 side protectors (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivered free to the construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to all areas of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2022, color: grey, overall weight: 15,000 kg, maximum load weight: 12,700 kg, empty load weight: 2,300 kg, loading space volume: 20 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,400 mm, gearing type: other, driver cabin: other, Vehicle location: Incoming / in transit, steel body, doors Djdevhiznepfx Aggswb Body: Roll-off container with double swing doors approx. 20m³, ARCHIVE IMAGES Roll-off container according to DIN 30722-1, external rollers greasable, floor 5mm, walls made of 3mm steel, frame spacing 750 mm, double swing doors with reinforcement and Dutch door lock, surrounding tarpaulin and net hooks, galvanized climbing irons front end according to UVV, RAL 7016! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, intermediate sale and errors! - .

Condition: used, mileage: 189,000 km, power: 95 kW (129.16 HP), first registration: 11/2007, fuel type: diesel, overall weight: 3,500 kg, color: green, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 6,000 mm, loading space length: 3,400 mm, Equipment: ABS, central locking, soot filter, Buy online. Finance digitally. Get nationwide delivery. ----Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3502]---- Your advantages with us: * Digital consultation via telephone or WhatsApp * Financing options also without a down payment * Trade-in of your vehicle, whether old or new Optionally bookable: * 12–60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery---- Summer offer: If desired and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). Vehicle highlights: 19% VAT can be shown 2nd owner German vehicle Regularly maintained Immediately ready for use Accident-free Platform body = 3,400 mm long / Width = 2,050 mm Payload = approx. 1,500 kg Total weight = 3,500 kg Special equipment: Trailer socket 13-pin, Battery 100 Ah, Ladder rack at the end of the platform body, Ladder rack behind the cab, Spare wheel in driving condition, Spare wheel holder under the end of the frame including jack, Interior rearview mirror, Rear wall with window, Mud flaps rear, Mud flaps front, Seat cover / upholstery: Artificial leather (cab), Seats in the cab: Co-driver double seat, Stabilizer rear reinforced, Stabilizer front reinforced, Storage compartment left and right below the platform body / superstructure, Shock absorbers reinforced, Preparation for mobile phone / cell phone, Front axle reinforced, Pre-wiring for tachograph Additional equipment: Airbag driver side, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Headliner in the cab, Glove compartment lockable, Body / Superstructure: Platform body standard, Fuel tank: Main tank 75 liters, Headlamp range adjustment, Truck registration, Engine 2.1 liters - 95 kW CDI CAT (2148 ccm), Wheelbase 3665 mm, Low emission according to exhaust standard Euro 4 Group III, Maintenance interval display Assyst, Heat-insulating glazing, Permissible total weight 3.5 t---- Do you want to lease or finance? We offer attractive offers - also possible without a down payment! Please contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. Dsdpozy T E Dofx Aggjwb All information on the Internet is non-binding and serves only as a general description of the vehicle. Errors, typos, and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: Djdpfxoyx Uy Ao Aggowb • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), Henkel UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface irradiation curing system developed for curing light-curing adhesives using UVA radiation and visible light. It is suitable for manual curing of individual parts during the manufacturing process as well as for laboratory use. The device integrates the following: a control unit with an integrated power switch and operating hour counter a lamp housing with the burner reflector igniter. Includes a UV protection box. Features: Contains a 400 W metal halide lamp Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected UV lamp life up to 1000 hours The power supply can be detached from the lamp module and operated separately Adjustable lamp height for optimal irradiation With a glass filter to prevent short-wave UVB/UVC emission Technical data: Dodpfx Aozg Expsggswb Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Glass tube fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with double-ended base Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm x 472 mm x 300 mm Ambient and operating temperature +10 °C ... +30 °C Storage temperature -10 °C ... +60 °C Weight ~ 11.5 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, machine/vehicle number: 007960, Squaring: First and Second Pass Max Panel Thickness: 200 mm Max feed speed: 36 m/min Distance between dogs: 450 mm Dwodswl Dnispfx Aggeb

Condition: used, Year of construction: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting machining with wear plate Machining length 6250 mm (DYNESTIC 20.6 additional 4th stop in Y already included) Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, spindle head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, ball screw spindles Z-axis for precise positioning Technical data: The technical data refer to the DYNESTIC 7521 - 20.6 Please refer to the corresponding data sheets. Machining dimensions: Max. workpiece size for edge machining X = 6250 mm Y = 2100 mm Max. travel distances X = 7360 mm Y = 2720 mm Z = 325 mm Max. clearance height DYNESTIC table Z = 1st stage 318 mm / 2nd stage 418 mm from top edge of table (without tool, without chuck) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood Dedpfx Agjw I U Ecogjwb with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-Core processor Operating system Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transfer of control and program data. Data transfer takes place via high-speed internet connection Requirement: High-speed internet connection at the machine. DYNESTIC table Solid, continuous machining table with grid division, continuous grooves in X and Y direction, groove spacing 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop rails / stop Height 30 mm, pneumatically lowerable 2 stop rails in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Boring unit 7976, 24 spindles Drive power 3.0 kW 18 vertical spindles individually selectable Arrangement in L-shape, 10 in X and 8 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating right-hand / left-hand rotation n(max.) 1000 - 5710 min-1, steplessly adjustable Chuck: M 10 thread - clearance fit 11 mm without tool, without chuck 6 horizontal spindles 2 double boring spindles in X direction (32 mm distance between 1st and 2nd horizontal boring spindle) 1 double boring spindle in Y direction Chuck: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without chuck Free space 1 for: Optional double boring spindle in X direction or Vertical adapter with double feed force Free space 2 for: Optional saw in X direction or Vertical adapter with double feed force Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 min-1, steplessly adjustable, two-stage feed stroke max. power at 12000 min-1 to 24000 min-1 air-cooled with HSK-F 63 tool holder with right-hand

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Workpiece & Performance Panel Formats: • Length 1,200–1,400 mm • Width 195 mm • Thickness 5–12 mm Line Performance (excerpt): • Multi-blade saw feed: 2–48 m/min • Pack assembly: max. 100 pieces/min • Packaging: up to 12 packs/min • Palletizing: up to 12 cycles/min Feeding & Cutting 1. BARGSTEDT TBP16/DG/30/22/S Gantry Feeder Vacuum gantry for feeding raw panels (fixed edge on the right) • Workpiece weight up to 100 kg • Capacity up to 5 cycles/min • Pallet return and light barrier safety system 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Provision of empty pallets for feeding • Capacity approx. 12 pallets • Max. stack height 1,800 mm 3. BARGSTEDT TAR40/28/22 Décor Alignment Station Aligns panels for décor-oriented further processing 4. Multi-blade Circular Saw K34/G/2200 Longitudinal splitting with edge trimming • Feed speed 2–48 m/min • Cutting height up to 58 mm • Main motor 22 kW • 9 saw blades + 2 chippers 5. Brushing Unit (after longitudinal cut) Horsehair brush, working width 2,200 mm, with extraction 6. BARGSTEDT Cross-Cut Saw Station HPp11 Cross-cutting in throughfeed mode with pressure beam • Cutting width 2,200 mm • Pneumatic overhead pressure rollers Singulation & Transfer 7. BARGSTEDT TFV40/ZR/RL/22/13/02 Singulation Station Turner with compartments (2×8 compartments) for distributing multi-panel assemblies • Conveyor speed 10–50 m/min 8. BARGSTEDT Right-Angle Transfer (TW) 90° transfer with belt conveyors, feed up to 130 m/min For transfer to the profiling line Profile Processing (soundproofed) 9. HOMAG FR 20/08/10/S Longitudinal Profiling Double-sided format processing • 6 units per side • 6.6 kW per unit • Tool diameter up to 200 mm • Joint color application + drying 10. HOMAG FL 20/08/15/S Cross Profiling Double-sided end profiling • 6 units per side • identical performance structure • integrated edge sealing 11. Sonolit Soundproof Cabin Housing for both HOMAG profiling machines • Approx. 12,000 × 7,000 × 3,000 mm Post-processing 12. BARGSTEDT TTK44/21/14/02 Dry Turner Workpiece turning in throughfeed • up to 100 cycles/min 13. BARGSTEDT B017/R/19/12/2/S Brushing Unit Double-sided fine cleaning with extraction Packing 14. BARGSTEDT TVP40/L/14/02 Pack Assembly Station Automatic pack forming with 1st/2nd choice sorting • Panels 1,200–1,400 × 195 × 5–12 mm • Pack height up to 80 mm • Capacity 100 pieces/min 15. BARGSTEDT TVK40/R/14/02 Carton Station Dwedpfx Aeywxrasggsb Folding and providing cartons prior to packaging • Up to 12 packs/min 16. BARGSTEDT TVA40/07/02 Paper Feeder Automatic application of protective paper • up to 10 packs/min guaranteed 17. Labelling Station Automatic pack identification (format range according to packaging data) Packaging 18. LP Maskin LPFK-2PFL-400 Shrinking Unit Fully automatic film packaging with shrink tunnel • Connection load 36–40 kW • Capacity up to 12 packs/min • Film width up to 800 mm 19. BARGSTEDT Belt Conveyor TFB20/017/04 with Air Shower Cooling section after the shrink tunnel Palletizing 20. BARGSTEDT TSH80/EO/14/08 Crosswise Package Stacking Automatic stacking of packages onto pallets • Packages up to 1,400 × 195 × 58 mm • Capacity max. 12 cycles/min 21. BARGSTEDT TBS0/D/30/08/S Swing Arm Stacker Layer-by-layer palletizing with vacuum suction cups • up to 6 cycles/min • Package weight up to 50 kg 22. BARGSTEDT PP20/12/08 Pallet Magazine Automatic provision of empty pallets for final palletizing

Condition: used, mileage: 338,003 km, power: 120 kW (163.15 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 2,356 kg, maximum load weight: 1,144 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, next inspection (TÜV): 08/2026, fuel: diesel, energy efficiency: D, fuel consumption (urban): 9.2 l/100km, fuel consumption (extra-urban): 7.1 l/100km, fuel consumption (combined): 7.9 l/100km, color: silver, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, maximum speed: 162 km/h, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, soot filter, traction control, trailer coupling, truck registration, * Well-maintained German vehicle, first owner * Vehicle IDNT No.: WDB9066331P554740 * TÜV/HU (technical inspection) valid upon sale Special features: * Hill-start assist * Trailer coupling: fixed ball hitch * 13-pin trailer socket * Audio system Audio 15 (radio with color display) * Outside temperature display * Roof control unit with reading light on driver/passenger side * Ceiling light in the cargo area with door contact switch * Generator 180 A * Speed limiter (cruise control) * Rear door (opening angle 270 degrees) * Wooden floor in the cargo area * Controlled air conditioning (Tempmatik) * Metallic paint * Smoker's package * Spare wheel in driving condition * Spare wheel carrier under the end of the chassis, including jack * Seats in the cab: double passenger seat * Seats in the cab: double passenger seat with folding backrests * Seats in the cab: driver's seat, comfort version * Rear stabilizer bar * Reinforced front stabilizer bar * Reinforced shock absorbers * Paneling in the cargo/passenger area: plywood Standard equipment: * 3rd brake light * Adaptive brake light * Airbag, driver side * Anti-lock braking system (ABS) * Drive type: rear-wheel drive * Washer fluid level indicator * Exterior mirrors, electrically adjustable and heated, both sides * Exterior mirrors with integrated turn signal * Battery 74 Ah * Brake assist * Braking system with ABS+ASR * Headliner in the cab * Electronic stability program (ESP) * Power windows, 2-way * 6-speed gearbox - TSG (Eco Gear) * Lockable glove compartment * Body/structure: high-roof panel van, standard * Child safety lock * Fuel tank: main tank 75 liters * Solid cargo area bulkhead Dwodpszzb Atofx Aggeb * Load securing/tie-down points * Headlight range adjustment * Model update * Engine 2.1 liters - 120 kW CDI CAT * Particulate filter * Wheelbase 3665 mm * Low emissions according to Euro 6 emission standard * Sliding door, cargo/passenger area, right side * Power steering * Seat belt system with warning system (driver side) * Seat cover/upholstery: fabric Lima * Seats in the cab: passenger seat with armrest * Seats in the cab: driver's seat with armrest * Maintenance interval indicator Assyst * Immobilizer * Heat-insulating glazing * Central locking with remote control * Permissible total weight 3.50 t Delivery throughout Germany possible! Trade-ins possible! Leasing and financing possible, even without a down payment. Errors, printing errors, and prior sale are subject to change.

Condition: used, mileage: 276,809 km, power: 120 kW (163.15 HP), first registration: 10/2009, fuel type: diesel, color: green, gearing type: mechanical, emission class: euro5, number of seats: 2, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, soot filter, Special equipment: 13-pin trailer socket, 100 Ah battery, digital tachograph, wooden flooring in the cargo area, folding cover for storage compartment, radio preparation, spare wheel with road tires, spare wheel holder under the frame end including jack, seats in the cab: double passenger seat, rear stabilizer, reinforced front stabilizer, lining in the cargo/passenger compartment: plastic Additional equipment: 3rd brake light, adaptive brake light, driver's side airbag, washer fluid level indicator, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assist, braking system with ABS+ASR, headlining in the cab, lockable glove compartment, rear door (opening angle 180 degrees), body/superstructure: high-roof standard van, child safety lock, fuel tank: main tank 75 L, continuous cargo area partition, load securing/tie-down points, headlight range adjustment, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to exhaust standard Euro 5, sliding door cargo/passenger compartment right, seat cover/upholstery: fabric Lima, service interval display Assyst, heat-insulating glazing, permissible total weight 3.50 t Dwjdpfx Aszlngajggjb ----Vehicle number 12073 ----Errors and prior sale excepted

Condition: new, Year of construction: 2022, color: grey, overall weight: 10,000 kg, empty load weight: 870 kg, loading space volume: 3 m³, loading space width: 2,150 mm, loading space length: 3,500 mm, loading space height: 500 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, doors Body: City roll-off container with hinged doors, approx. 3.8m³ - Mounting fittings for CITY hook systems to DIN 30722-3, with lubricatable and replaceable outer rollers at the rear, and UNP-140 subframe - Mounting bracket hook height 900 mm - Floor pan made of 3 mm St 37.2 (S235JR) - Side walls made of 3 mm St 37.2 (S235JR) - Rounded base tray, with 250 mm radius to the side wall Dwsdpfxevhkuis Aggeb - End profile made of sturdy round tube - Frame spacing 1,500 mm - Frame profile U 80 x 50 mm - Double-wing door at the rear with sturdy espagnolette lock and side central safety lock (ZV) in accordance with UVV - Door lock with container door opening aid - All-round tarpaulin and net hooks ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: good (used), Year of construction: 2016, functionality: fully functional, Model: GL 840 PH H-UV Year: 2016 Impressions: 218 million PQC-S OFF-PRESS CONTROLS (with USB/CF media input) – including overhead amp HIGH SPEED START-UP SMART SEQUENCE SELF DIAGNOSIS II KHS-AI - Pre-linking & removal - Self-learning function - Production management system (diagnostics, maintenance) - Register preset SMART FEEDBACK SIMULTANEOUS PRESETTING OF FRONT/BACK INK KEYS (all units) AIR PRESET FULLY AUTOMATIC PLATE CHANGING – BENDERLESS TRANSFER CYLINDER COCKING REMOTE CONTROL PAPER THICKNESS PRESETS PAPER SIZE PRESET PACKAGE Dwjdpfxoy Rmdwj Aggjb • Sucker head preset • Slow-down wheel preset • Side lay guide • Delivery side jogger • Sheet release cam remote control FEEDER SIDE BLOWER PRESET FEEDER PILE SIDEWAYS CONTROL WITH PIT-LESS SKID LOADER SUCKER HEIGHT REMOTE CONTROL SUCTION TAPE FEEDER (Additional rubber wheels and belts on feeder board) ANTI-STATIC AT FEEDER SUCTION SIDELAY GUIDE FEEDBOARD VENTURI GUIDE ULTRASONIC DOUBLE SHEET DETECTOR REGISTER DETECTION (2-STEP DETECTION) ‘A’ TRANSFER CYLINDER GRIPPER PAD HEIGHT ADJUSTMENT ‘A’ (INFEED) CYLINDER COCKING REMOTE CONTROL ‘A’ (INFEED) CYLINDER ANTI-FANOUT REMOTE CONTROL ANTI-RUST TREATMENT FOR PLATE CYLINDERS ANTI-RUST TREATMENT FOR BLANKET CYLINDERS ANTI-RUST TREATMENT FOR IMPRESSION CYLINDERS ONE-TOUCH BLANKET CLAMP FOR BARRED BLANKET SHEET GUIDE OVER IMPRESSION CYLINDER AIR BLOWER ABOVE IMPRESSION CYLINDER SOLID TRANSFER CYLINDERS + GRIPPER PAD UP/DOWN (one-side adjustment) FULLY AUTOMATIC DOUBLE SIZE 3-CYLINDER PERFECTING UNIT IMPRESSION CYLINDERS WITH STAINLESS STEEL JACKET – after perfecting unit H-UV PROOF OIL SEALS INK DUCTOR INTERVAL ADJUSTMENT MOTORIZED INK FOUNTAIN ROLLER INK ROLLER NIP FOLLOWING INK ROLLER TEMPERATURE CONTROL (oscillation) INK OSCILLATION TIMING REMOTE CONTROL INKER FAN (feeder side on unit) INKER/DAMPENER DE-CLUTCH – all units INK MIST EXTRACTOR FANS (GL40) – New type KOMORIMATIC DAMPENING SYSTEM DAMPENING FORM ROLLER SPEED REDUCTION (Delta Effect) OSCILLATING RIDER ROLLER ON DAMPENING FORM ROLLER BRIDGE ROLLER RIDER ROLLER UNDER DAMPENING FORM ROLLER SKEWING DEVICE ON KOMORIMATIC WATER LEVEL SENSOR AUTOMATIC BLANKET CLEANER (H-UV/pre-pack) AUTOMATIC IMPRESSION CYLINDER CLEANING (H-UV/pre-pack) INK WASHING TRAY PNEUMATIC ON/OFF AUTOMATIC INK ROLLER CLEANING – twin nozzles SHEET DECURLER AIR BLOWER ABOVE DELIVERY PILE ANTI-STATIC BAR AT DELIVERY DELIVERY SHEET ANTI-DEVIATION DEVICE AUTOMATIC LUBRICATION ON DELIVERY CHAIN GUIDE DELIVERY AREA SENSOR DELIVERY PILE EXTRACTION – DRIVE SIDE FIXED ROLLERS – A, B & C INTERCOM H-UV DRYER PREPARATION Technotrans Beta.c 280G Alcosmart, digidos.p 150C, FZT 120P. Conductivity display for Beta.c pH value display for Beta.c • PDC-SX (Print Density Control – Spectrophotometer and Automatic Register Control) • KID (Komori Info-Service Display) • Baldwin Ozone-Free Metal Halide H-UV System, including: - 1x H-UV LED – end of press - 1x H-UV LED – before perfecting unit • Technotrans Beta.c 280G • Technotrans external cooling system (installation excluded) • A-APC – Asynchronous Automatic Plate Changing • A-APC / Automatic Blanket Cleaner Parallel Control for GL-40 • K-PressNavi • DC Blowers • Special Ink Misting Cover on All Units

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 5,000 l, usable tank capacity: 5,000 l, total height: 3,225 mm, outer diameter: 1,756 mm, overall weight: 1,640 kg, wall material: stainless steel, wall thickness: 8 mm, wall structure: single-walled, manhole diameter: 610 mm, manhole location: top, operating temperature: 100 °C, negative pressure: 100,000 Pa, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel agitated pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates and load cell arrangement, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP. Material: 316L Stainless Steel throughout. Working Volume: 5,000 Litres. Shell ID: 1,740mm. Overall Height: 3,225mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 1,640kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Numbers: PXL19635-1, PXL19635-2, PXL19635-3. Factory Tested: September 2020. Fitted with SEW-Eurodrive geared agitator with double mechanical seal, seal pressure pot, and reinforced agitator mounting. Nozzles and fittings include 610mm hinged manway, CIP inlet with dip pipe and TOD clip-on spray fitting, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, dual flush polished level switches, load cell arrangement on support legs, lifting lugs, and earthing boss. Three units currently available, all brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Djdpfxjzhnlzs Aggswb Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options.

Condition: used, Year of construction: 2021, The Smipack XP 650 ALX is a fully automatic monobloc overlap shrink wrapper with an inline infeed conveyor. It packs products like glass/PET bottles, cans, jars, and boxes at speeds up to 25 packs per minute using a single film reel system. [1, 2, 3, 4] Key Features Operation Modes: Works with film-only, or with pad/tray configurations depending on exact model variations (like ALX-T or ALX-P). Infeed System: Multi-row inline infeed with an electromechanical oscillating sorter to align products. Film Handling: Single film reel design with optional printed film centering devices. Shrink Tunnel: Built with an efficient double-chamber shrinking setup. [1, 2, 3, 4, 5, 6] Technical Specifications Max Output: Up to 25 packs per minute (ppm) Max Product Height: 380 mm Dedpszp A Uaofx Aggowb Max Reel Size: 650 x Ø 400 mm Working Pressure: 6 Bar Machine Weight: Approx. 1,682 kg ed linking conveyor into a high-performance double-chamber tunnel for final heat shrinking. Standard Built-In Features Pneumatic Reel Locking: Uses a dedicated reel chuck with convenient built-in rollers to streamline heavy roll replacements. Safety & Control: Equipped with sliding protection doors featuring a deceleration device, manual reel sealers, and a metric-graduation centering system. Sensor Grid: Features a complete array of photocells monitoring product presence, infeed obstruction, film wrapping, and tunnel outlet accumulation. Are you interested in reading about the FLXMOD® control system details, or do you need a list of available optionals like the printed-film centering device? AI responses may include mistakes. Learn more Year of construction: 2019 & 2021 Max speed: 72000 Current size (ml): 3×2 Container material: Can, Glass, Pet Max. container: height 170 mm Packaging Type: Film Number of lanes: 8 Max reel size: Ø 500 mm Number of reels: 2 Automatic Changeover: No Compatible Spare Parts: 6 months Dimensions: 17500x1800x2400 mm Power: 182 kW Compressed Air: 6 bar

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, TIMAC TZZ-1604 Circular Disc Cutter with Double-Station Automatic Stacker. Year 2018 Inspected and ready for production. Automatic circular cutter for disc production from coil or strip, equipped with a double-station automatic stacker, enabling continuous operation without downtime. Specially designed for manufacturing ends and lids, circular blanks, and parts for deep drawing or stamping processes. Main features: • Circular cutting using adjustable blades • Diameter adjustment system for various disc formats • Double-station automatic stacker: - Vacuum arm for individual disc collection - Possibility to remove complete stacks without stopping production - Doors with safety latches and interlocks • Integrated electrical and pneumatic system: - Independent electrical panel - PLC control - Safety compliant with CE regulations Djdpfx Aey Edk Rjggowb Key technical specifications: • Sheet thickness: - Up to 3 mm (carbon steel / aluminium) - Up to 1.5 mm (stainless steel) • Blade diameter: 100 mm • Installed power: approx. 16 kW • Electrical supply: 400 V / 50 Hz • Pneumatic pressure: 6 bar • Year of manufacture: 2018

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Dsdpfx Agoyzxa Esgswb Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) Dedpfxsxraims Aggewb (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Min. saw blade diameter: 100 mm Saw blade arbor diameter: 25 mm Router bit arbor diameter: 35 mm Router bit arbor height: 120 mm Manual feed adjustment for the arbor and saw blade Dwjdpfezik Diox Aggsb Table length: 1400 mm Manual clamping device Separate motor for the arbor and saw blade Power supply: 400 V Overall dimensions: Length: 1950 mm Width: 1000 mm Height: 1250 mm

Condition: used, Year of construction: 2007, functionality: fully functional, 1 lot approx. 15x Revo END KSB ROLL servomotors Valve quarter-turn actuator Actuator ACTAIR NG 5 F05/07 End ZA27-ED63 Revo RD501200500000 Only for sale complete Used from roll car wash disassembly Dwedsum I Sfspfx Aggjb Item location is 75053 Gondelsheim Used condition, see pictures Shipping by forwarding agent or collection by appointment

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Dodpewmqwysfx Aggswb

Condition: new, Year of construction: 2024, functionality: fully functional, ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Price includes shipping within Germany – No additional transport costs! ✈️ Fast delivery: Only 6 weeks after receipt of payment! PROFESSIONAL POWDER COATING HAS NEVER BEEN THIS EASY! Looking to expand your business and enter the world of professional powder coating? The PEF2.5+ is the perfect solution for beginners! This high-performance system allows efficient, cost-effective, and high-quality coating of car rims and smaller workpieces – with minimal effort! ✨UNBEATABLE PROMOTION – ONLY UNTIL THE END OF MAY!✨ Take advantage of this limited-time offer before it's too late! PONY Luxury Coating – QUALITY THAT CONVINCES! ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✅ 100% European manufacturing – No China products, only top quality built to European standards! ✅ Modular & expandable – Additional options for greater performance and flexibility! ✅ All spare parts included – Long-term use with no hidden extra costs! ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the best chance of success. Contact us today. ✳️ ✨✨Buy directly from the manufacturer and secure price and quality advantages!✨✨ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ Powder oven + powder booth + powder gun Complete Starter Package PEF2.5+ ⭐ Powder oven with electric heating ✔️ INTERNAL WIDTH: 1,505mm ✔️ HEIGHT: 1,800mm (from air duct) ✔️ INTERNAL LENGTH: 2,500mm ✔️ Thermoblock unit dimensions: 785x1800x2210mm; heating capacity is 30 kW/h; recirculation fan is 1.5kW/h – 1 pc.; exhaust fan is 0.54kW/h. ✔️ Double-wing door with thermal insulation and silicone seal. ✔️ Guide rails for rack trolleys are manufactured according to the dimensions specified on the base plates. ✔️ Specially designed air duct for homogeneous air distribution inside the curing oven. ✔️ Electrical panel materials by Siemens and Schneider. This curing oven does not include a PLC system. PLC is available as an option. ✔️ Curing temperature, curing time, and heater unit function are adjustable. At the end of the program, an alarm and light signal from the buzzer will indicate completion. Dedpfx Aewfhu Hoggowb ✔️ Additionally, a product transport trolley with cast wheels is located inside the oven. ⭐ Powder coating booth ✔️ Dimensions: 800x1930x2200mm (including fan) ✔️ Teflon filters: 4 pcs. ➢ Filter suction fan: 4kW x 1 pc. (6,000m3/h – 200mmSS) ✔️ 36W LED lighting x 1 pc. ✔️ Bottom drawer x 1 pc. ✔️ Control panel for air intake and powder spray regulation ✔️ DELTA frequency converter ✔️ Heavy-duty rollers under the coating booth ✔️ Additional filter at the fan outlet ⭐ Powder coating gun E-Coat+3 Master with Multicolor (vibration table) Enquire now – Get your business ready for the future! ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE-certified and necessary machines have ATEX certificates.☀️

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Log yard with restacking unit Complete log handling system from the log receiving area to the transfer to the debarking line. The system performs automatic log handling, singulation, end trimming, metal detection, butt end reduction, debarking, 3D measurement, and sorting of the logs. Key technical data Capacity: approx. 30,000 m³ of logs in a single-shift operation Log diameter: approx. 160–660 mm Log lengths: 4,000–5,250 mm Special lengths up to 6,100 mm Long logs up to approx. 20 m Herzog processor head with 55 kW hydraulic unit End trimming diameter up to approx. 700 mm Integrated metal detection Hobest Primus butt end reducer for log diameters up to 900 mm EWD ER 90 debarker with rotor opening 100–900 mm Rotor drive: 45 kW, frequency-controlled Feed speed during debarking up to 30 m/min Calibrated Microtec 3D log scanner Sorting block conveyor with five hydraulic discharge stations The restacking unit automatically returns, singulates, and realigns the logs for feeding to the debarking line. It consists of, among other things, an approx. 18 m long log handling conveyor, a four-stage inclined conveyor, a 90° curved conveyor, a double-strand block conveyor, a transverse conveyor, and an integrated log turner. Dsdpszvyl Asfx Aggowb The restacking unit can be purchased separately if required.

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dsdpjqbr Suefx Aggswb Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame