Used Double Fold for sale (14,592)

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling Fjdpfxew S T Iqs Aa Eofw 5-axis milling machine with simultaneous milling head (Gabelkopf)

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Fjdpfx Aajhxvu Eo Eefw Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Fjdpfx Aaefx Hyfo Ejfw Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Tipping container, tipping skip for forklift trucks Chip container – bulk tipping skip – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry brackets: 230 x 110 mm Fork spacing inside: 160 mm Fork spacing outside: max. 600 mm - Fork entry pockets – entry brackets for transport and emptying by forklift or pedestrian pallet truck - Manual tipping mechanism via hand lever - 4 heavy-duty plastic fixed castors Ø 175 mm, 2 of which are swivel castors - Foldable tow bar Dead weight: 220 kg Fjdpfjhly Ifox Aa Eofw Length: 1700 mm Width: 1060 mm Height: 1500 mm Very good condition Suitable for collecting, storing and transferring recyclable materials

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Pressing force: 125 tons Column gap: 1050 mm Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Main pump motor power: 22 kW Control pump motor power: 4 kW Ffjdpfjguvtlex Aa Eow Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Condition: used, Machine not operational – control system not running Special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Serial No. 300487 Year of manufacture: 2006 Pressing force: 500 tons Column gap front and rear: 2520 mm Table surface: 2500 x 2500 mm Ram surface: 2500 x 2500 mm Ram stroke: 600 mm Installation height max.: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable approach speed: 100-800 mm/s Pressurization to 5000 kN: approx. 0.7 sec. Return speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-position flat guide for the ram - Hydraulic ram locking at TDC - Freestanding control cabinet (200 x 50 cm) - Siemens PLC control S7-314 - Operation via Siemens OP 170-B (5.7”) - Two-hand control desk, freestanding - Floor-level installation Ffodpfjdzqptjx Aa Esw - Table plate 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication - Operating manual with circuit diagrams Required space (L x W x H): 372 x 260 x 460 cm Required space for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm speed 710 / 800 / 950 rpm. Drive power 2x 3 kW Fjdpfx Aajdzqmho Eofw mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg good condition

Condition: used, Double-column hydraulic press SCHÖN Type SH 25 Machine no.: 4453 Year of manufacture: 1999 Pressing force: 25 tons Column width: 500 mm Lateral column clearance: 120 mm Table surface: 440 x 320 mm Table opening: Ø 175 mm Ram surface: 360 x 220 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Connection voltage: 380 V, 50 Hz Equipment: - Safety light curtain SICK, type FGS 300-11 - Two-hand operation Ffodpfx Aow A Amrja Esw - Stroke counter - Rapid and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Pressing force regulation - Adjustable pressing time 1–10 s (pressure holding time) - Adjustable return stroke speed - Blow-off device electrically pre-wired, without air valve - Manual hydraulic tool safety, adjustable via handwheel Dimensions (L x W x H): 1300 x 1200 x 2200 mm Weight: approx. 1200 kg Good condition

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Serial No.: B1802498 Year of manufacture 09.05.2018 Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height product filled: approx. 9 m Operating pressure: max. 7 bar air connection: 3/8" suction connection: 1 1/2" pressure connection: 1 1/2" Fjdpfx Aasib D H Ue Eefw - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Fsdpfx Aehubgwoa Ejfw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams Fedpfx Ajdzqbloa Ejfw For producing a seam bend Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 Fedpfedzqaajx Aa Eofw - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm Ffodpfxodzp Tcs Aa Esw installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Drill grinding machine GÜHRING type SS 15 make no. 909 year of construction approx. 1977 drill diameter max. 40 mm grinding wheel diameter right 300 mm grinding wheel diameter left 250 mm grinding wheel width 40 mm grinding spindle speed approx. 2800 rpm motor power approx. 2,2 kW Mains connection 380 Volt, 50 Hz - center angle infinitely variable Fsdpfx Asdzp Tbea Esfw - Pointing device - gear motor for height oscillation in front of the cup wheel - diamond dressing holder - various drill bit holders - coolant device space requirement L x W x H 1200 x 950 x 1550 mm weight approx. 1150 kg

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft Ffodjdzp Snspfx Aa Eew - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Ffjdpfew U Dtvex Aa Ejw Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Sheet width: 105 ??? 500 mm Sheet length: 174 ??? 648 mm Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Condition: used, The Horizon AFC-544 AKT is a versatile cross folder currently in operation at a printshop in Germany. Designed for sheet sizes up to 540 x 760 mm (minimum 120 x 172 mm), it combines efficiency with flexibility for a wide range of folding applications. The machine features 4 buckles with knife in the first folding unit and 2 buckles in the second unit, supported by a fully automatic knife for precise folding. Equipped with Zolltouch & work Zoll technology, it offers intuitive operation and includes 17 standard folding types preprogrammed, along with memory capacity for 200 repeat jobs. Capable of handling paper weights from 40 to 250 g/qm2, it delivers a maximum speed of 40,000 cycles per hour. Additional specifications include: Fold length: minimum 58 mm (1st buckle), 35 mm (other buckles) Pile height: 650 mm Power: 400V / 50Hz ??? 2.5 kW Dimensions: 2,700 x 1,050 x 1,650 mm Weight: 1,050 kg (without conveyor) This machine offers a compact, high-performance solution for professional folding needs, combining automation, memory functions, and robust engineering. Format: 540 x 760 mm Equipment: 4-buckles cross folder Parallel fold Crossfold Technology: touch & work Memory folding types: 17 standard-typs of fold preprogrammed - Saveable jobs: 200 memories for repeat orders 1.folding unit: 4 buckles + knife 2.folding unit: 2 buckles Knife: full automatic Sheet size:max. 540x760mm; min. 120x172mm - Fold length:1. buckle: min. 58mm all other buckles: min. 35mm Paper weight: 40-250g/sqm Pile height: 650mm Speed: max. 40.000 cycles/h Power: 400V/50Hz - 2,5kW Dimensions: 2.700x1.050x1.650mm Weight: 1.050kg Ffodew Upqmjpfx Aa Esw (without conveyor)

Condition: new, Bernardo swivel bending machine with segmented clamping beam TB 1270 Working length 1270 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width 45 mm Fsdped Hxmdjfx Aa Ejfw Bending angle 0-135 ° Width 1620 mm Depth * 1115 mm Height 1150 mm Weight approx. 340 kg * with Backgauge Properties Universal bending machine for sheet metal working and repairers Robust construction in modern design Slight adjustment of the upper beam by means of foot pedal, hands are free for the workpiece Manual bending machine for standard bending tasks Segmented clamping beam for a large number of bending possibilities Optimal price-performance ratio Faster and easier bending operation via handle Easy setting of the lower beam on the corresponding thickness High upper beam for the manufacture of highly bent profiles Scope of delivery Segmented clamping beam Backgauge Bending segments 25 | 30. 35. 40. 45. 50. 75. 100. 150. 200. 250. 270 mm

Condition: new, Folding machine with segmented clamping beam TB 1020 Technical specifications Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.5 mm Maximum opening width 48 mm Bending angle 0-135 ° 1350 mm wide Depth * 1115 mm Height 1140 mm Ffsdpfsd Hxmnox Aa Ejw Weight approx. 290 kg * with Backgauge Properties Universal bending machine for sheet metal working and repairers Robust construction in modern design Slight adjustment of the upper beam by means of foot pedal, hands are free for the workpiece Manual bending machine for standard bending tasks Segmented clamping beam for a large number of bending possibilities Optimal price-performance ratio Faster and easier bending operation via handle Easy setting of the lower beam on the corresponding thickness High upper beam for the manufacture of highly bent profiles Scope of delivery Segmented clamping beam Backgauge Bending segments 25 | 30. 35. 40. 45. 50. 75. 100. 150. 200. 270 mm

Condition: new, Bernardo swivel bending machine with segmented top -, bottom - and beam TB 1020 Flex Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width with segments 48 mm Maximum opening width without segments 150 mm Maximum clearance height 125 mm closed Bending angle 0-135 ° Backgauge 600 mm Working height 900 mm Width 1400 mm Depth * 1070 mm Height 1260 mm Weight 430 kg * with Backgauge Properties Piano inserts in the top, bottom and beam results in a large number of bending possibilities Tapes and special sections with opposite bends are easily achievable with these models Universal bending machines for sheet metal working and repairers Simple swivel movement of the beam by means of handle Slight adjustment of the upper beam for efficient working High upper beam for the manufacture of highly bent profiles Large-sized flat Guide for precise work A cylinder of help helps the edges off the bending process Ffedpfx Aod Hxm Iea Eew Scope of delivery Segmented top - sub and bending flange Backgauge Corner segment left / right side 75 mm | 25. 30. 35. 40. 45. 50. 75. 100. 200. 270 mm

Condition: new, Bernardo swivel bending machine with segmented upper and lower beam of TBS 1020 Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width 54 mm Bending angle 0-135 ° 1350 mm wide Depth * 1115 mm Height 1170 mm Weight approx. 310 kg * with Backgauge Properties Segmented top and bending flange for various bending possibilities Clamping by means of foot pedal, hands remain free for optimum positioning of the plate Universal bending machine for sheet metal working and repairers Robust construction in modern design Manual bending machine for standard bending tasks Optimal price-performance ratio Faster and easier bending operation via handle Easy setting of the lower beam on the corresponding thickness High upper beam for the manufacture of highly bent profiles Scope of delivery Segmented clamping beam Segmented lower beam Ffsdpfx Aaed Hxmtj Esw Backgauge Bending segments 25 | 30. 35. 40. 45. 50. 75. 100. 150. 200. 270 mm

Condition: new, PILOUS double miter band saw ARG 300 plus H.F. with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, belt tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm Fsdpeh S Ikkofx Aa Esfw Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor:400 V, 50 Hz, 2,2 kW Pump motor:400 V, 50 Hz, 0,05 kW Hydraulic power unit motor:400 V, 50 Hz, 0,18 kW Saw blade speed:15-90 m/min. Stepless Saw blade length:3150 x 27 x 0,9 mm Working height from vice: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm machine dimensions (max.)1700 x 2000 x 2150 mm Machine weight: 645 kg

Condition: new, PILOUS double miter band saw ARG 260 plus H with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, Belt tension indicator Roller conveyor D 300 / 3m incl. manual measuring system Fodpsilqbusfx Aa Esfw Roller conveyor D 300 / 3m Cutting range: Round:90° -45° +45° +60° in mm:260-175-200-125 Square:90°-45°+45° +60° in mm:255-145-185-120 Rectangle:90°-45°+45° +60° in mm.300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Motor from hydraulic unit 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm working height from vice 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Machine weight 490 kg

Condition: new, PILOUS Double miter band saw ARG 260 plus E Incl. special accessories: driven chip brush, band tension indicator. Cutting range: Round:90° -45° +45° +60° in mm.260-180-200-125 Square:90°-45°+45° +60° in mm. 240-160-185-105 Rectangle:90°-45°+45° +60° in mm. Fjdpfx Aaeilqd Nj Eofw in mm.300 x 185-190 x 105-185 x 295-125 x 105 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm Working height from vice 900 mm Coolant tank approx. 15 l Machine dimensions (min.) 1690 x 750 x 1430 mm Machine dimensions (max.) 1980 x 1510 x 2040 mm Machine weight 310 kg

Condition: new, PILOUS Double miter band saw ARG 235 plus Incl. special accessories: driven chip brush, band tension indicator. Cutting range: Round:90° -45° +45° +60° in mm.235-165-185-115 Square:90°-45°+45° +60° in mm.230-145-160-80 Ffedsilqh Ejpfx Aa Eow Rectangle:90°-45°+45° +60° in mm.280 x 180-185 x 80-185 x 100-115 x 80 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Saw blade speed 40/80 m/min. saw band length 2710 x 27 x 0,9 mm working height from vice 900 mm Coolant tank approx. 15 l Machine dimensions (min.) 1640 x 750 x 1400 mm Machine dimensions (max.) 1930 x 1610 x 2000 mm Machine weight 295 kg