Used Eisele Kms 090 for sale (124)

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm - Square: 82 x 82 mm - Miter cut: at 45° - Round: 110 mm - Rectangular: 80 x 120 mm - Square: 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm Bjdpfx Abszqtrfo Dewt - Weight: approx. 300 kg

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Bsdpfx Ajvmz R Seb Dswt Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm Bwsdjtq Takspfx Ab Det - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Bwodpfx Aboznc S Ae Djt Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left Bwjdpfx Aszinzrob Dst - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: defective spare-parts repository (used), Year of construction: 1975, functionality: unexamined, machine/vehicle number: 3015, rotational speed (min.): 40 rpm, rotational speed (max.): 80 rpm, input voltage: 380 V, EISELE VMS2-D045 Cold Circular Saw – defective / untested Selling a used EISELE cold circular saw, type VMS2-D045. The machine is explicitly sold as defective or untested. Sale is exclusively as a DIY project, a source of spare parts, or for repair. The saw was taken out of service for safety or age-related reasons. No guarantee on function, accuracy, or operational safety. The EISELE VMS series is considered a robust industrial metal cold circular saw with a solid machine construction and high cutting accuracy. Technical data Manufacturer: EISELE Type: VMS2-D045 Machine type: Metal cold circular saw / Vertical circular saw Semi-automatic version Suitable for steel, stainless steel, and profile materials Pneumatic vise Coolant system available Multiple saw blade speeds High-voltage connection 400 V Pneumatic saw feed Solid cast iron machine construction Key technical data of the VMS series Saw blade diameter, depending on the version, approx. 275–315 mm Cutting range up to approx. 100 mm round material 2 cutting speeds, approx. 40 / 80 rpm Motor power, depending on the version, approx. 1.4–3.6 kW Condition used Sold explicitly as defective untested condition ideal as a source of spare parts or a restoration project no warranty Bwsdpsy Uq U Iofx Ab Det no returns Inspection is highly recommended Loading and transport by the buyer Note Technical specifications according to the nameplate or existing version. Year of manufacture and accessories, see photos. Sale is made excluding any liability for material defects.

Condition: ready for operation (used), A vertical cold circular saw Behringer Eisele with material support on the left and right is available. Saw blade dimensions X/Y/Z: 350mm/3mm/40mm, speed: 68rpm, max. cutting capacity for flat material X/Y: 170mm/100mm, max. cutting capacity for square material X/Y: 100mm/100mm, max. cutting diameter: 120mm, machine dimensions X/Y/Z: approx. 1050mm/800mm/2200mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Bwedpfx Ajzklfqsb Det

Year of construction: 2019, condition: excellent (used), functionality: not functional, Compact hydraulic C-frame punching machine with 160 kN punching force for precise applications on smaller profile cross-sections. The torsion-resistant frame design ensures accurate punching in aluminium, steel or plastic. Bwodpfxjy Agqnj Ab Det

Condition: used, Year of construction: 1991, We offer the following machine: - with roller conveyor --> Outfeed: 4 m --> Infeed: 3 m Technical details: - Saw blade diameter: 450 mm - Cutting diameter: 150 mm - Saw blade arbor: 50 mm - Table size: Ø 700 mm - Table rotatable: 360° - Electric model - Voltage / Frequency: 400 / 50 V/Hz - Compressed air connection: 6-8 bar - Total power consumption: 3.6 kW Bjdpfx Abozgvqpe Djwt - Machine weight approx.: 1170 kg - Machine dimensions: 1.5 x 1.0 x 2.35 m (L x W x H) Circular saw, semi-automatic - Profiling circular saw machine - Undercut saw for cutting materials: steel as solid material, tubes, and profiles, taking into account the cutting range. Cutting speed depends on the material/workpiece to be cut. Miter cut: 30° to 90°

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: Bsdpew D T Uijfx Ab Dowt - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Year of construction: 2001, condition: used, Profile height: max. 150 mm Profile width: max. 300 mm Milling area: 365 x 230 mm Pneumatic workpiece clamping Bwsdpfx Abszmhqze Dot Minimum quantity spray device 2 pneumatic copying pins with copying pin 5/ 8/ 10 mm

Year of construction: 1993, condition: used, Milling cutter diameter: 300 mm Max. cut-off width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Sackson length: 500 mm Bwjdpferv A Hmsx Ab Det Stop between 20° - 90° - 20° Pneumatic workpiece clamping Minimum quantity spray device Manual feed Weight: approx. 280 kg

Condition: good (used), Year of construction: 2002, Saw blade diameter: 350 mm Cutting capacity: Round: 120 mm Square: 100 x 100 mm Bwedpfxjy Uv Ite Ab Dst Rectangular: 170 x 100 mm 2 saw blade speeds: 34/68 rpm Drive motor: 380 V, 2/2.6 kW Weight approx.: 300 kg Space required approx.: 800 x 700 x 1770 mm

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN Bjdequuufjpfx Ab Djwt CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S TENSION FORCE ..... MAIN CLAMP 10500N

Condition: used, Max. punching force: 100 kN Adjustable stroke, max. 50 mm Stroke activation via foot switch Bjdpfjxrmz Ajx Ab Djwt Weight: approx. 600 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 8883, Offer 26051 Technical Specifications: - Feed of the milling unit manual - Worktable height adjustable via handwheel - Horizontal and vertical material clamping - Cutter diameter up to 300 mm - Max. milling height 150 mm - Max. milling depth 110 mm - Max. milling length 500 mm - Angle-adjustable stop left & right 20° - 90° - Spindle speed 2800 rpm - Drive 400 V 2.2 kW - Compressed air connection 6 - 8 bar - Air consumption per cycle 10 l - Pneumatic profile clamping - Spray device - Space requirement approx. W 1300 x H 1450 x D 1100 mm Bsdpfx Absyz S Trs Dswt - Weight approx. 300 kg

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Bwodpfxjzcpv Se Ab Djt Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm Cutting area up to 80x200 mm Stroke length: max. 800 mm with digital display Saw blade RPM: 2,000 - 3,800 rpm. Piece counter with automatic shut-off when the target value is reached Continuously adjustable pneumatic material feed Bodpfexn Iq Dsx Ab Dewt Hydro-pneumatic saw feed Pneumatic material clamps Spray device Including user manual Machine dimensions: 2100 x 1100 x 1500 mm (W x D x H) 1000 kg

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9131, Offer 26050 Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° up to 280 mm - Notching width at 30° up to 100 mm - Vertical saw blade manually swivellable from 90° - 30° via hand wheel - Usable as a shifting saw without horizontal saw blade - Profile stop shoulder swivellable 30° - 90° - 30° - Pneumatic material clamp - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm Bwjdpfsyz Tqrex Ab Djt - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

Condition: used, Year of construction: 1990, saw blade diameter 300 mm Bwodsy Ehx Ejpfx Ab Det cutting diameter 90 mm turning speeds 40/80 U/min total power requirement 1,5 kW weight of the machine ca. 350 Kg dimensions of the machine ca. 0,9 x 0,8 x 1,5 m Cold circular saw - Machine light - Coolant system

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Siegfried Volz Machine Tools Bsdoyrh Rgepfx Ab Djwt Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, for processing aluminum and steel profiles with 1 vertical milling motor, 1.1 kW drive, 220/240 V, 50/60 Hz Speed: 7,000 – 11,000 rpm Bjdpfxoy S Aa De Ab Dowt 2 pneumatic indexing pins, with indexing pin 5/8/10 mm Pneumatic workpiece clamping: 2 horizontal clamping cylinders 1 pneumatic spray nozzle Milling area, length/depth: 365 x 230 mm Profile height max. 150 mm, profile width up to 300 mm Operation via switch and 2 hand levers

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm saw blade turning speeds 40 / 80 U/min Bsdpey N D Nnjfx Ab Dewt capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW weight of the machine ca. 0,5 t

Condition: used, Year of construction: 2009, Hydraulic operation Profile height up to 210 mm under hold-down Max. stamping height with double-adjustable punching heads: 145 mm Abutment height: 150 mm Bjdpfeyu Rw Isx Ab Dowt Weight: approx. 450 kg

Condition: used, Year of construction: 2011, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Bsdpfx Aoynalujb Dowt Weight: approx. 400 kg