Used Elektromotor 5000 U Min for sale (56,014)

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters Gisdpsydnigefx Anleu • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: used, No. 10031 Mobile screening plant with trailer Spaleck SEWU 2400 x 5000 Used According to our customer / the previous owner, the machine is fully functional and can be viewed and tested on site Screening plant Spaleck SEWU 2400 x 5000 Used, year of construction 2012 Trailer Multi-Trans ZAL 4PA Used Load capacity 47000 kg Weight 8600 kg Conveyor belt STK Metall ML-BAND Used, year of construction 2012 Gedpfx Anoyl Sg Soleiu Sale on behalf of customer, ex location near 54634 Bitburg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 512 mm, total height: 1,952 mm, total length: 772 mm, Directly from the manufacturer, the original from Apfel GmbH. Fully assembled including 2 KRB 4700 shelves 1 storage box KEN 6422 (No. 62) 2 storage boxes KEN 4322 (No. 42) Gisdpfjuvigpox Anlju 1 waste garbage can made of sheet zinc 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Load capacity: 400 kg Dimensions: 512 w x 1,952 h x 772 t Structure powder-coated in black gray RAL 7021 (body) Various designs and special solutions possible, we as the manufacturer will support you with your wishes! (See pictures 3+4)

Year of construction: 2022, operating hours: 100 h, condition: excellent (used), functionality: fully functional, travel distance Y-axis: 269 mm, machine/vehicle number: 1111127689, Equipment: sliding door, Hello, the machine is in perfect condition. For more information, please contact me by email. Cutting Capacity (Max): Magnutom 400: ø151 mm / 5.9" 151 x 403 mm / 5.9 x 15.9" 92 x 550 mm / 3.6 x 21.7" PHYSICAL SPECIFICATIONS: Cutting Motor: Continuous Power (S1): 11 kW / 14.7 HP Intermittent Power (S3): 16 kW / 21.5 HP Cut-off Wheels for Magnutom 400: Diameter x Thickness x Bore: 432 x 3.0 x 32 mm / 17 x 0.12 x 1.26" Rotational Speed (at rated load): 1000–1950 rpm Cut-off Wheels for Magnutom 500: Diameter x Thickness x Bore: 508 x 3.5 x 32 mm / 20 x 0.13 x 1.26" Rotational Speed (at rated load): 1000–1850 rpm Positioning & Feed: Cut-off Wheel Positioning Range: Y = 385 mm / 15.16", Z = 235 mm / 9.25" Max. Sample Height Under the Cut-off Wheel: No limitation Max. Positioning Speed: Y = 70 mm/s / 2.75"/s, Z = 50 mm/s / 1.97"/s Feed Speed Range: 0.1 – 10 mm/s / 0.002 – 0.2"/s (adjustable in steps of 0.1 mm/s / 0.002"/s) Cutting Force: 0–1400 N / 10–315 lbf Cutting Table: Fixed Table (Magnutom-400/-500): W x D 827 x 781 mm / 32.56 x 30.75" Optional X-Table: W x D (max): 942 x 781 mm / 37.10 x 30.75" W x D (min): 673 x 781 mm / 26.50 x 30.75" Travel Range (X-axis): 269 mm / 10.6" T-slots, Bi-directional: 12 mm / 0.48" Dimensions and Weight: Width: 1758 mm / 5' 9" Depth: 1463 mm / 4' 9" Height: 1882 mm / 6' 2" Weight: 2400 kg / 5291 lbs Cutting Chamber: Width: 1000 mm / 3' 3" Depth: 1206 mm / 3' 11" Height: 918 mm / 3' 0" Ambient Conditions: Gsdpsyfrucjfx Anleiu Operating Temperature: 5 – 40 °C / 41 – 104 °F Humidity: 0 – 95% RH, non-condensing

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles Gijdexfvahopfx Anlou 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, degree of automation: automatic, We offer this fully operational TRUMPF TruPunch 5000 R-1300, type: laser punching machine, year of manufacture 2002. If you have any questions or require additional information, please send a message or contact us by phone. Giodoy Rglujpfx Anleu

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: Oerlikon wire feeder, gas-cooled Gisdpfx Ansvw Radelou -Type: unfortunately without type designation -Dimensions: 640/280/H400 mm -Total weight: 19.6 kg

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil Godpfeu N Sibox Anloiu -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW Gsdpfepvqy Ijx Anljiu -Pressure: up to 300 bar -Flow rate: 20 l/min -Individual components: see photos -Dimensions: 1500/1030/H1210 mm -Weight: 555 kg

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with chassis -Motor: kW -Pressure: up to 200 bar -Flow rate: 48 l/min Gjdpfx Anopz Sf Neljiu -Individual components: see photos -Dimensions: 1580/1040/H1200 mm -Weight: 632 kg

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 Gedou Scqhjpfx Anloiu -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: KCS 71.16-2 D -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1200/960/H600 mm -Weight: 470 kg Gsdpfxsb Uhp Ie Anlsiu

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN Godogh Dxaspfx Anlsiu -Control range: 2.5-50 mbar -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Condition: used, Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts Gisdpfx Aob Uhpwjnlsu -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1000/420/H655 mm -Weight: 140 kg

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG trimming unit for trimming the protruding edges on the front and rear edges Giedjb Uhrtepfx Anlju -with heavy leadership -Milling unit: swiveling -2x motors -Motor type: -Power: 0.23 kW -Voltage: volts -Frequency: Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1020/400/H700 mm -Weight: 110 kg

Condition: ready for operation (used), functionality: fully functional, The MEYN TH600/5000 industrial fryer is designed for production lines seeking controlled, continuous frying that delivers consistent results and meets industrial throughput requirements. This model integrates seamlessly into food processing operations, especially for coated, breaded, or pre-cooked products. Its continuous design ensures even frying throughout the entire length of the oil bath, maintaining stable product quality—even during extended production runs—while minimizing waste and ensuring process repeatability. The working width and frying length allow for precise control over product dwell time in the oil. Accurate regulation of both time and temperature achieves uniform coloration and consistent texture, resulting in visually uniform products with controlled oil absorption. The industrial design of the fryer enables a continuous product flow, increasing overall line productivity and accommodating both medium and high-capacity production requirements. Constructed entirely from food-grade stainless steel, the fryer offers excellent resistance to thermal stress and frequent washdowns. The MEYN fryer features a proven design recognized throughout the food industry for its long-term reliability. Easy integration into existing lines minimizes infrastructure modifications, reduces downtime, and keeps maintenance straightforward. The MEYN TH600/5000 is thus a strategic choice for food industry operators looking to secure their frying process while optimizing consistency, yield, and product quality. Technical specifications: Year: 1997 Type: Continuous industrial fryer Usable belt width: 600 mm Frying length: 5000 mm Gsdpfsx Ihivjx Anljiu Construction: Food-grade stainless steel Cooking method: Controlled oil bath Integration: MEYN automatic line Manufactured in: The Netherlands

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Gsdpfx Aehh Ibtonleiu Condition: used / used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece Gisdpfsb A Im Rjx Anlou

Condition: used, Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg Gsdpfx Anovrdr Nslsiu

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1685x765x650 mm Weight 91 kg Gisdpevz Ek Esfx Anlsu Total power requirement 2,2 kw

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: UWID/5000/97, grinding spindle speed: 10,000 rpm, feed rate X-axis: 20 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 20 m/min, center height: 150 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 250 mm Travel Z-axis: 250 mm Gisdpfx Aeyh I U Ionlou Feed rate X-axis: 0 - 20 m/min Feed rate Y-axis: 0 - 10 m/min Feed rate Z-axis: 0 - 20 m/min Centre height: 150 mm Usable table area: 980 x 185 mm Grinding head Swivel range: 240° Rotation speed: 120°/s Spindle diameter: 170 mm Spindle speed: 2,000 – 10,000 rpm Workpiece holder A-axis Indexing accuracy: ± 15″ Cumulative indexing error (at ∅ 100 mm): 8 µm Mount: ISO 50 Max. rotational speed: 50 rpm Position measuring systems resolution: 0.0001 mm / 0.0001° Tool magazine: 70 tools MACHINE DETAILS Control: NUM 1050 M with PC; Program memory: 512 KB Drive capacities Grinding spindle motor: 10 kW Table drive X-axis: 1.5 kW Workpiece holder A-axis: 1.5 kW Cross slide Z-axis: 1.5 kW Grinding head column Y-axis: 3 kW Grinding head rotation B-axis: 3 kW Electrical connection Connected load: 23 kW Main fuse: 63 A Operating voltage: 400 V, 50 Hz Control voltage: 24 V Lighting voltage: 230 V, 50 Hz Compressed air Air consumption: 10-12 Nm³/h Pressure min/max: 5/8 bar (500/800 kPa) Compressed air quality: ISO 8573-1, class 4 Ambient temperature Operation: 15°C - 35°C Weight: 7,400 kg Further documentation for the machine is available on request.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake BendMaster Robotic Bending System Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Gisdpfx Ansxdfqmelsu Press force: 130 tons Bending length: 3,250 mm Year of manufacture: 02.2016 More information and video available on request ...

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection Godpfx Aoxayl Dsnleiu - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Year of construction: 2008, condition: good (used), Example advertisement! Machine is not offered. Operating hours: 27,301 h (laser on) | 10,406 h (beam on) weight: approx. 17.700 kg dimensions: 18.000 x 9.000 x 2.800 mm (length x width x height) Permissible dimensions of workpieces: Max. Material thickness mild steel: 8.0 mm Max. Material thickness stainless steel: 5.0 mm Max. Material thickness aluminum: 4.0 mm Giedpfx Anohmu R Delju Max. Finished part length: 3,000 mm + option extension unloading table 1,000 mm

Condition: good (used), Year of construction: 2004, functionality: fully functional, operating hours: 39,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, total height: 5,600 mm, total length: 9,000 mm, overall weight: 6,000 kg, controller model: Heidenhain Mill Plus IT, For sale is a 5 axis machining center of the Makre DMU and type 50 eVolution Please note the GMN high frequency spindle spindle HCS 30.000 /15 and the 92-fold tool changer The machine is in good condition and fully functional Technical data Year of construction: 2004 Operating hours: approx. 39,000 h Control system: Heidenhain MillPlus IT Gsdstyit Espfx Anleiu Table size: approx 500 mm ⌀ Traverse paths: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0-180° C-axis: 360 ° Tool holder: HSK 50 Spindle speeds: max: 30,000 1/min Frequency: 500 Hz Power: 15 kW Tool places: 92 NO chip conveyor Space requirement according to drawing: 9,000*5,600 mm Transport dimensions: 2,800*3,700*2,800 mm Weight: 6,000 kg On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website