Used Embossing Calender for sale (179)

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Gsdpfjvtpcisx Abdoil Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition Gedpfxjxqg T Ns Abdjil - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: Nr.7723202, total width: 2,500 mm, total length: 3,400 mm, total height: 2,500 mm, overall weight: 9,000 kg, input current: 20 A, input voltage: 400 V, Best hand-built letterpress machine in 72 x 101 format. Requires very little space for this size. Extremely robust construction. Motor has only run for 3 years after overhaul, feeder table belts made from Habasit. We have three of these machines in daily production ourselves, used for die-cutting, creasing, perforating, and blind embossing. Output per hour is easily 3,000 to 3,500 sheets. Can also be converted to 72 x 102 cm format. Die-cutting plates for these machines are available from us. We have four of these Condor machines in stock, and they can be purchased in a package of 2 or 4 units. Gijdpjx A S Ipofx Abdsl

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. Gedswck U Repfx Abdeil It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: new, Approx. 150 rolls, Fromm PET strapping for manual strapping tools, 15.5mm – used - : Price per roll, ex location: €45 (net)! Manufacturer: Fromm Type: PET strapping Dimensions: 15.5 x 0.85 x 1,400 mm Colour: green Core: 406 mm Embossed Breaking strength: 510 kg Gisdpfx Abextanfodsl Metres per roll: 1,400 Available: immediately Condition: New stock Location: 89264 Weißenhorn

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Gjdjwh Tq Sjpfx Abdeil Technical data and figures are subject to change.

Condition: excellent (used), functionality: fully functional, mileage: 553,123 km, power: 536.91 kW (729.99 HP), first registration: 07/2017, fuel type: diesel, axle configuration: 4x2, next inspection (TÜV): 07/2024, fuel: diesel, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, additional headlights, air conditioning, airbag, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, SCANIA R730 *V8* / Premium and luxury packages ! TOP equipment ! 2-Pieces in stock / 2-Pieces in stock ! Equipment details: Engine: 730 HP Euro6 Transmission: OPTICRUISE (Kickdown Opticruise) Eco-Roll function Opticruise shift program Economy, Standard, Power Turbocharger reinforced SCANIA RETARDER Differential lock PREMIUM long-distance cab equipment Aerodynamic tractor unit Wind deflector LED EQUIPMENT Black PREMIUM driver's seat + passenger seat with V8 embossing DRIVER'S SEAT VENTILATION (seat climate) + heating Extendable lower bed 800-1000mm Wood/leather steering wheel with airbag Driver's side airbag Black leather door trim Luxury dashboard design Backlighting below the dashboard Dashboard passenger side with table Dashboard woodgrain trim Premium instrument cluster Infotainment system Premium 7'' display Infotainment voice control STANDBY AIR CONDITIONING SYSTEM Scania original Extra cab heating water/air 3kW Air conditioning Air conditioning and heating system LED headlights LED fog lights 3-diode LED daytime running lights + position/marker/outline/indicator LED tail lights LED work lights on rear wall of cab High beam headlights in front grille Cab suspension air comfort Double-glazed door window WSS tinted Roof spoiler height-adjustable manually with crank ALCOA DuraBright alloy wheels with MICHELIN tires Special paint finish frame + plastic parts Front grille paint V8 black (Ebony/Black Brilliant) Contrasting black door/side panel (glass) Aluminum checker plate cover up to fifth wheel coupling Godpfoq H Tgtsx Abdeil Aluminum checker plate tool box, right on frame Frame special paint finish + plastic parts Additional interior fittings: Engine tunnel cover Black leather trim Electric roof hatch incl. mosquito net Roof liner backlighting Backlighting cab rear wall Ambient interior lighting Side sun visor inside driver's side Roller blind Black leather floor mats Side AIRBAG driver's side Equipment packages: Premium infotainment package with NAVIGATION 7'' display and driver package Premium driver package with armrest (Opticruise) Seat upholstery package LEDER black MCC Underline package 2 with side trim Safety package with assistance systems Comfort package CR cab Light package Climate system package Air conditioning+ Premium + with heating Assistance systems: Assistance systems Scania AEB (Emergency Brake Assist) + Scania LDW (Lane Departure Warning) + Scania ACC (Adaptive Cruise Control) Scania AEB (Emergency Brake Assist) Scania-ACC (distance control) Scania-LDW (Lane Departure Warning) Communication: Infotainmant System Premium 7'' display Infotainment voice control Map data Europe Bluetooth for radio Infotainment switch in the steering wheel Speakers Premium Version 4x20W Dual Coil Radio with DAB (Digital Audio Broadcast) Cell phone preparation Speedometer remote download (switch) Scania Comunicator C300 etc. ... VA tires: 385/65R22.5 ...MICHELIN... HA tires: 315/80R22.5 ...MICHELIN... 1st owner / 1st owner SCANIA Servicegepflegt / SCANIA Service maintained ! für weirere Info's / for more Info Mobile-Tel.: +43 664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We take care of all customs matters for you. Where to put the used car? ...if you agree, we will be happy to trade it in. The offer is non-binding and subject to change. Subject to errors and prior sale.

Condition: good (used), Year of construction: 2005, Brand: CMC ITALIA Model: HSV 70-20 Year of manufacture: 2005 Automatic lining and laminating line - Automatic gluing machine Heliomat - Carton Spotter - Glue viscosity mixer 1) HELIOMAT HLM75 Gluing Format: 75 x 115 cm, high-pile feeder Paper size: 70 x 110 cm (max.) | 10 x 15 cm (min.) Mechanical speed: 20 pcs/min Machine control and adjustment via computer or manual operation of main functions. Servo drive for speed and precision Electronic speed regulation Glue recirculation Option includes glue mixer and viscometer Detachable feeder for easy cleaning of the gluing unit Continuous paper feeder Gjdpfx Ajx Npb Nebdsil Standard conveyor belt 1.5 m Paper detection via photocell Reduced maintenance and cleaning times Quick setups Power supply: 7 kW Weight: 820 kg 2) SPOTTER SPT110 Carton feeder Format: 70 × 110 cm, with external pre-loading Automatic positioning via photocells for 1 to 5 sheets of carton on glued paper Easy and fast format changeover Carton thickness: 0.5 to 4 mm Carton format: max. 70 x 110 cm, min. 15 x 20 cm Mechanical speed: 20 pcs/min Included: loading hopper with original ramp. 3) VIRGO 70 Casemaker Format: 70 × 110 cm, 4-side version Automatic folding from all four sides High precision and power folding on all four sides Easily calendered filling Output data on delivery table Calendar cycle for cover page and edge-to-edge gluing Carton thickness: 1.5 to 4 mm Carton format: max. 70 x 110 cm, min. 14 x 16 cm Mechanical speed: 20 pcs/min Power supply: 3 kW Weight: 960 kg

Condition: ready for operation (used), Year of construction: 1967, functionality: fully functional, machine/vehicle number: No.1469/77, mold height (min.): 2,356 mm, Gietz – Proofing Press / Luxury Model Gijdox A Eaxspfx Abdjl Manufactured in the 1960s in Switzerland, print format 52 x 68 cm A beautiful, compact, and solid example. Technically impeccable and fully operational – the ideal printing press for museums, schools, workshops, and dedicated hobby artists seeking an authentic, durable piece of equipment. Previously located in the atelier of the Gutenberg Museum in Fribourg, Switzerland. This machine is highly versatile and can be used for letterpress printing with lead or wooden type, woodcuts, linocuts, blind embossing, die-cutting, and much more.

Condition: new, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/sec return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm back stop - adjustable max. 800 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 7524 kg range L-W-H 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual : machine and control Gisdpoxab Hiofx Abdel - Safety manual : press brakes

Condition: good (used), approx. 5,500 pieces, folding crate, Euro stacking container, Bekuplast, 600 x 400 x 285 mm, gray - used - : Price per unit ex location (net): Minimum purchase 3 pallets (min. 384 crates): only 6.-€ (net)! for purchase of 9 pallets a (min. 1,152 pieces): only € 5 (net) Giodpfxevff H Uj Abdol for complete purchase: only € 4.50 (net)! Manufacturer: Bekuplast Type: Clever-Retail-Box 56 ltr. 63843 Niedernberg Year of manufacture: unknown External dimensions: 600 x 400 x 285 mm (folded 65 mm high) Internal dimensions: 565 x 365 x 275 mm Sides and base closed Roughly ribbed sandwich base with welded plate in gray Color: grey 401 Base: sandwich base Sides: closed Handles: open Material: PP-C (polypropylene copolymer) Suitable for industrial use: Yes Weight: 2,955 kg 1 pallet packed approx. 2m high = approx. 128 crates, 1 pallet approx. 2.40 m high packed: approx. 156 boxes Condition: good, with embossed Weltbild logo Available: immediately, partial quantities later Location: CZ, Bor, later warehouse Frankenberg / Saxony

Condition: good (used), Year of construction: 2018, functionality: fully functional, For Sale: CARTES GT364VHSR (2018) Condition: Pre-owned, carefully maintained, fully functional Availability: By arrangement The CARTES GT364VHSR combines advanced technologies with a modular design, making it one of the most competitive solutions on the market. It not only guarantees premium finishing results but also enables the production of high-value labels with maximum efficiency and economy. Main Configuration - Modular machine with MHPS system: Automatic, independent positioning of each unit. 1. Infeed Unit - Servo-driven Ø76mm pneumatic expanding shaft (reels up to Ø800mm / 200kg) - Automatic web tension control based on reel diameter, end-of-material automatic stop - Electronic web guide with ultrasonic sensor, splicing table, pneumatic clamps & tape dispenser - High-sensitivity photocell for print mark or contrast point detection - Fully servo motor-controlled web transport - VETAPHONE Corona treater system, 2 kW 2. Flexo Varnishing Unit - Full rotary flexo varnishing with UV dryer (40–160 W/cm) - TRESU closed chamber "V" unit Giodpfx Aexwl Dmjbdjl 3. Hot Stamping & Embossing Unit - 2 transverse and 1 longitudinal foil feeders - Hologram photocell & gauges 4. Silk Screen Printing Unit - Flatbed for full backgrounds, spot & tactile printing - UV curing system (29–250 W/cm) - Vacuum table for multiple frame sizes 5. Semi-rotary Die-Cutting with AGS & IDS - Gearless magnetic cylinder, die thickness: 0.2–2 mm - Air Gap System (AGS): Perfect cutting depth control from the first cycle, minimizing waste and die breakage - Image Distortion System (IDS): Software-based die adaptation (+/-20%), allowing reuse of existing dies for different repeat lengths 6. Powerscope BST 5000 with motorized support 7. Outfeed Unit - Fully servo-driven draw & rewind system with slitting (10 razor blades) - Two Ø76mm shafts (up to Ø800mm & Ø500mm reels), automatic tension control (CW/CCW) - Additional Ø25mm shaft for special applications - Ø76mm matrix shaft (up to Ø500mm reels), optimized for high-speed matrix stripping of intricate shapes - PC for remote diagnostics & updates (Cartes support) Key Advantages - Highly modular configuration adaptable to production requirements - Multiple advanced finishing technologies integrated in one system - Cost efficiency via reduced waste and die reuse - Remote support & updates for long-term reliability Additional Equipment - Comprehensive accessory package included - Extensive range of spare parts available

Condition: excellent (used), functionality: fully functional, mileage: 478,600 km, power: 537 kW (730.12 HP), first registration: 07/2018, fuel type: diesel, axle configuration: 4x2, next inspection (TÜV): 07/2024, fuel: diesel, brakes: retarder, gearing type: automatic, Year of construction: 2018, Equipment: ABS, additional headlights, air conditioning, airbag, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, SCANIA R730 *V8* / Premium and luxury packages ! TOP equipment ! 2-Pieces in stock / 2-Pieces in stock ! Equipment details: Engine: 730 HP Euro6 Transmission: OPTICRUISE (Kickdown Opticruise) Eco-Roll function Opticruise shift program Economy, Standard, Power Turbocharger reinforced SCANIA RETARDER Differential lock PREMIUM long-distance cab equipment Aerodynamic tractor unit Wind deflector LED EQUIPMENT Black PREMIUM driver's seat + passenger seat with V8 embossing DRIVER'S SEAT VENTILATION (seat climate) + heating Extendable lower bed 800-1000mm Wood/leather steering wheel with airbag Driver's side airbag Black leather door trim Luxury dashboard design Backlighting below the dashboard Dashboard passenger side with table Dashboard woodgrain trim Premium instrument cluster Infotainment system Premium 7'' display Infotainment voice control STANDBY AIR CONDITIONING SYSTEM Scania original Extra cab heating water/air 3kW Air conditioning Air conditioning and heating system LED headlights LED fog lights 3-diode LED daytime running lights + position/marker/outline/indicator LED tail lights LED work lights on rear wall of cab High beam headlights in front grille Cab suspension air comfort Double-glazed door window WSS tinted Roof spoiler height-adjustable manually with crank ALCOA DuraBright alloy wheels with MICHELIN tires Special paint finish frame + plastic parts Front grille paint V8 black (Ebony/Black Brilliant) Contrasting black door/side panel (glass) Aluminum checker plate cover up to fifth wheel coupling Aluminum checker plate tool box, right on frame Frame special paint finish + plastic parts Additional interior fittings: Giodpfx Aeq H T Eqobdel Engine tunnel cover Black leather trim Electric roof hatch incl. mosquito net Roof liner backlighting Backlighting cab rear wall Ambient interior lighting Side sun visor inside driver's side Roller blind Black leather floor mats Side AIRBAG driver's side Equipment packages: Premium infotainment package with NAVIGATION 7'' display and driver package Premium driver package with armrest (Opticruise) Seat upholstery package LEDER black MCC Underline package 2 with side trim Safety package with assistance systems Comfort package CR cab Light package Climate system package Air conditioning+ Premium + with heating Assistance systems: Assistance systems Scania AEB (Emergency Brake Assist) + Scania LDW (Lane Departure Warning) + Scania ACC (Adaptive Cruise Control) Scania AEB (Emergency Brake Assist) Scania-ACC (distance control) Scania-LDW (Lane Departure Warning) Communication: Infotainmant System Premium 7'' display Infotainment voice control Map data Europe Bluetooth for radio Infotainment switch in the steering wheel Speakers Premium Version 4x20W Dual Coil Radio with DAB (Digital Audio Broadcast) Cell phone preparation Speedometer remote download (switch) Scania Comunicator C300 etc. ... VA tires: 385/65R22.5 ...MICHELIN... HA tires: 315/80R22.5 ...MICHELIN... 1st owner / 1st owner SCANIA Servicegepflegt / SCANIA Service maintained ! für weirere Info's / for more Info Mobile-Tel.: +43 (0)664 4477030 Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We take care of all customs matters for you. Where to put the used car? ...if you agree, we will be happy to trade it in. The offer is non-binding and subject to change. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2015, operating hours: 50 h, functionality: fully functional, machine/vehicle number: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. The machine has been tested but was not put into production. It has operated for 50 hours. It is designed for the forming of cold-rolled sections, either open or closed, which are laser-welded. The input material for profile production consists of coils made of black or galvanized steel. Component parts (serial numbers in accordance with technical documentation): 1 - Soprem H1250/D/1700ZR decoiler, serial no.: 20140388/1, year of manufacture: 2014 2 - Soprem CH-2540 strip end welder, serial no.: 20140388/2, year of manufacture: 2014 3 - Dreistern RS616 multi-roll forming machine, serial no.: 15773, year of manufacture: 2015 - base frame, serial no.: N/A, year of manufacture: N/A - P60/80/90 gearbox unit, serial no.: N/A, year of manufacture: N/A - servo drive, serial no.: N/A, year of manufacture: N/A - Dreistern P60 forming, embossing, and perforating stands, serial no.: N/A, year of manufacture: N/A 3 x Dreistern RC1500, RC1501, RC1502 roll forming tools, serial no.: N/A, year of manufacture: N/A 4 - Trumpf TruLaser Cell 1100 laser, serial no.: S1200C0090, year of manufacture: 2014 5 - Dreistern TS214.10 cut-off machine, serial no.: 15122, year of manufacture: 2015 - Dreistern S 200.10 circular saw, serial no.: 15094, year of manufacture: 2014 6 - Electrical cabinets 7 - Laser safety system Giodjxz Tuuspfx Abdel

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Gjdpfx Aevfpwwjbdsil Cardboard max. 800 g/m² Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Sheet size min 210 x 148 mm Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Condition: used, Year of construction: 1996, plate thickness 6.0 mm ST thickness at "Niro-steel" 4.0 mm Giodpfx Aexabx Eobdjl plate thickness 8.0 mm ALU angle adjustable from - to 30 - 140 Grad table: 950 x 890 mm blade length 220 x 220 mm stroke 35 H/min work height max. 1150 mm total power requirement 3.0 kW weight 800 kg range L-W-H 1200 x 1200 x 1400 mm New price approx. 20.000 euros Special price on request - in checked condition - machine video - ?v=QmUbaV41BfA Equipment: - electro-hydraulic notching machine * ??with adjustable angle 30° – 140° - cutting capacity up to 6.0 mm sheet thickness (R42/mm2) - made of the special spheroidal cast iron GS500. - the cutting movement takes place from top to bottom - robust work table made of steel with conical grooves * which ensure optimal adhesion of the stop angles - the scales are embossed - automatic cutting gap adjustment (patented) - system for the automatic adjustment of the gap * between the upper and lower knives * for simultaneous cutting of different thicknesses - 2x angle-adjustable locking stops - finger protection made of plexiglass - 1x freely movable foot switch - waste chute, side - load hook for easy transport - operating instructions (PDF)

Condition: good (used), Label letterpress printing machine Iwasaki, machine no. 1499, 3 colors, 2 colors, die-cutting unit, embossing unit, various mounting plates, laminator, UV dryer, unwinder, slitter-rewinder, in good condition, immediately available. 3 machines available. Working width: 21 cm and 18 cm. Upon request, we are happy to inform you about additional machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Gisdpoiphikefx Abdel

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears Giedeu Ttf Njpfx Abdsl

Condition: new, pressure 34,0 kN stroke 40 mm Giedpfsfv Avyjx Abdel throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: used, Year of construction: 2009, Overview  This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Control functions: Pre-sorting (Heuft Spectrum SX TB 72): Bottle shape Bottle height Inspection (Heuft InLine reflexx Release 9): Side wall inspection (inlet & outlet) Mouth & thread inspection Bottom inspection Residual liquid detection (IR/HF) Label residues in the neck area Test bottle detection Scope of delivery Heuft InLine reflexx Release 9 Heuft Spectrum SX TB 72 (pre-sorting) Heuft Gateway II (network connection) Rejection table and piece of infeed and outfeed conveyor Rejection of defective bottles Giodjwr Aadjpfx Abdel

Condition: used, Year of construction: 2006, Laminating machine TPM Katana 106 Year of manufacture 2006, approx. 36,000 operating hours For thermal and wet lamination Technical details and equipment: Max. sheet format: 106 x 165 cm Min. sheet format: 44 x 63 cm Feeder: Mabeg Extras: De-powdering and brushing device Laminating unit with drying drum and separate laminating calender. Large counterpressure roller for increased laminating pressure, 2-stage motor hydraulics Hot water heated cylinders (2 separate temperature control devices) 2-stage air jet drying (separately controllable) Gijdpfxoxdhq Ao Abdol Sheet separator with flying knife (cross cutter) and short cut for OPP film Stacker with sheet deformation and stop rollers Central control and operation (Siemens control system / with Profibus) The system has been regularly serviced by the manufacturer and is fully functional.

Condition: new, Hazar Makina HM625 Transfer Printer Year of manufacture: 2021 Model: 600 Printing width: 2000 mm Calender cylinder diameter: 625 mm Electrical power: 40 kW Electrical power per hour: 18 kW Heating system: Heating oil (surface heat distribution is even) Machine control panel: 7-inch LCD PLC system Gijdpfx Aoq Rd Rcsbdol Cooling system: Automatic Resistance power: 30 kW Motor power: 2.2 kW Heat-up time: 70 minutes Seal clamping and guiding system: Automatic (pneumatically controlled linear slide) Cylinder heat control: Double automatic control of the outer and inner surfaces. Printing speed: 3-7 meters in minutes Felt: Nomex Item condition: Display item

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Gsdpfx Abovptbusdeil Characteristics: Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, overall weight: 52,000 kg, punching force: 600 t, space requirement height: 3,520 mm, space requirement length: 12,150 mm, space requirement width: 9,340 mm, Machine for punching, embossing, waste stripping and blanking Used machine, overhauled at the QTM Schwalmtal plant System equipped with high-performance sheet feeder for NON-STOP operation ⦁ For fully automatic punching, creasing and embossing with or without gripper edge ⦁ for stripping the inner waste as well as the side and rear sheet edges ⦁ for stacking the punched and stripped sheets with the attached gripper edges or the attached gripper edges or ⦁ for cutting off the gripper edges and then depositing the remaining sheets in stacks remaining sheets ⦁ with a patented gripper carriage register system for maximum register accuracy ⦁ with a bundle stacking machine that features a fully automatic separating sheet feeder and NON-STOP delivery and does not need to be converted even for the smallest blanks. changeover even the smallest cuts. (Shuttle table with comb structure) ⦁ Cut-off sheet magazine with electrical stock control, during production refillable during production ⦁ with Centerline equipment ⦁ with automatic pallet changing device in the storage area ⦁ Modem ⦁ Standard elevation of the machine 600 mm Gijdpfst E Nthox Abdjl Specification Sheet format max. 1060 x 1450 mm Sheet format min. 500 x 700 mm Maximum punching force 6.0 MN (600t) Speed 8,000 Bg / h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/ Corrugated cardboard up to 5 mm (max. sheet curvature 4 %) Features: patented QTM rail system manual non-stop feeder stripping station depaneling station Centerline Fully automatic pallet changing device Deposit incl. platform Upgrade of the control system to Siemens S7 Completely overhauled machine drive Quick-clamping frame in all tool stations

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Gisdpfxofv Avve Abdel Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.