Used Energy Generation for sale (12,517)

Condition: excellent (used), Year of construction: 2022, cooling capacity: 13.06 kW (17.76 HP), type of cooling: water, ICS Cool Energy Type: IC 305 Year of manufacture: 2022 ICS Cool Energy i-Chiller IC 305 – Industrial water chiller Nominal cooling capacity: 13.06 kW Refrigerant: R410A, 2.4 kg For sale is a compact industrial water chiller (process chiller) of the type i-Chiller IC 305 from ICS Cool Energy. The unit is ideally suited for cooling machines, processes or laboratory applications. Equipment / Features: Integrated hydraulic system (pump, expansion tank, etc.) Robust "coil-in-tank" evaporator system for high operational reliability Compact, space-saving design Plug-and-play installation – ready for immediate use Suitable for a wide range of applications: plastics processing, food industry, breweries, recycling, laboratories, and more. Technical details Power consumption: 3.64 kW Energy efficiency (EER): 2.85 Itodew S Txispfx An Njk Voltage supply: 400 V ± 10 %, 3 phases + PE, 50 Hz Power: 8 kW Max. ambient temperature: 46 °C Compressor(s): 1 unit Refrigerant: R410A Tank volume: 115 l Dimensions (L × W × H): 660 × 1315 × 1420 mm Noise level: 81 dB(A) sound power, 53 dB(A) sound pressure Weight (operating weight): approx. 220 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: refurbished (used), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 002332192500000472, overall weight: 211 kg, total length: 1,320 mm, total width: 850 mm, total height: 1,720 mm, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 63 m³/h, pressure (max.): 10 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Following transport damage, completely refurbished with a new screw unit! Coaxial screw compressor with maintenance-free drive and maximum energy efficiency across all pressure ranges. The low compressor speed and the reduced load on the bearings of the patented direct drive enable very long service lives. Electronic EasyTRONIC Micro II control for reliability and efficiency. Prevents motor overload, reduces wear, and extends service life. Monitors operating hours, temperature, and motor overload. Controls the direction of rotation of the motor via a phase sequence relay, thereby preventing potential damage during commissioning or after relocation. Optimized cooling system. Low-noise radial fan guarantees optimal operating temperatures even under unfavorable operating conditions. Thermostatically and electronically controlled fan and generously sized heat exchangers result in a longer service life and reduced fluctuations in oil temperature. User-friendly in every detail. Low noise, suitable for installation in any working environment. Small external dimensions, making transport and installation easy. Service-friendly due to optimal accessibility and easy disassembly and assembly of all components requiring maintenance. All air and oil pipes are made of heat-resistant rubber. Standard with star-delta circuit. Itjdezrnc Iopfx An Nek Ready for connection with all fittings. Integrated desiccant dryer. Higher reliability of the compressed air system without costly downtime and production delays, while simultaneously ensuring product quality. Ready for use without any installation effort.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1213255, REF: MM6183 1 x Double D Food Engineering double rack industrial oven, including baking racks and chimney. Features fan assist / air circulation (electric). Supplied with 15 x bakery racks. Itedpfsxb Alvsx An Nek Located in Northern Ireland and ready to collect. Technical specification ⚙️ ✅ Manufacturer - Double D Food Engineering Ltd ✅ Burner model - n 2-4 ✅ Date of manufacture - 1992 ✅ Rating 500-000 General overview ℹ️ Designed for precision thermal processing, this oven delivers consistent and reliable results for a wide range of applications, including baking, roasting, drying, and cooking. This oven provides superior temperature control and uniform heat distribution, which is critical for product quality and safety. Key Features & Benefits 📋 ✅ Consistent Results: Ensures uniform cooking, baking, or drying for consistent product quality. ✅ High-Volume Capacity: Built to handle large production batches, significantly increasing efficiency and throughput. ✅ Precise Control: Offers accurate temperature and time control, allowing for fine-tuning of the cooking process. ✅ Hygienic Design: Constructed with materials and features that facilitate easy cleaning and meet food safety standards. ✅ Versatile Applications: Suitable for a broad spectrum of food products, from baked goods and snacks to meats and ready meals.

Year of construction: 2019, condition: used, functionality: fully functional, This is a freezer from the manufacturer Eco Frost, model SY-247484, manufactured in 2019. The freezer is made of stainless steel and has a capacity of 1200 liters. The freezer has been inspected in our in-house workshop, and the unit is fully functional. The list price is €2,616.81 gross / €2,199 net. Our price: €1,785 gross / €1,500 net. You will receive an invoice with VAT shown. Our used equipment service for you: 3 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional - or your money back. Flexible shipping or self-collection options. Competent advice - before and after the purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. Technical data: W x D x H: approx. 1480 x 830 x 2010 mm Power connection: V: 230 / Hz: 50/60 Capacity: 1200 liters / 2/1 GN Energy consumption: 4.61 kWh/24h Temperature range: -18/-22°C Number of shelves: 6 Door hinge: right Year of manufacture: 04/2019 Type: SY-247484 Itodpfx Aozcmwaen Nok Condition: used, inspected, fully functional. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday, 9:00 a.m. to 1:00 p.m. and 2:00 p.m. to 5:00 p.m. Sales are made exclusively subject to our general terms and conditions (GTC).

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave system System and functional description Microwave system consisting of two MW50 V microwave modules, an inner roller conveyor and two outer roller conveyors. The actual microwave chamber consists of a 3 mm stainless steel sheet and has switch cabinet segments permanently mounted on the long side in which the high-frequency components are installed behind mechanically and electrically secured covers. The roller conveyor system for transporting the pallet within the system is manufactured in microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which emit energy directly into the chamber interior. This technology guarantees an even distribution of energy within the chamber. The magnetrons can only be switched on when the door is closed and pressed down. The sealing system at the door opening prevents microwave leakage radiation. Any vapors generated are extracted via 2 extraction fans with a total capacity of 17,000 m*/h (free-blowing) . The necessary cooling of the high-frequency components takes place via the air flow of the extraction fans, supported by 4 supply air fans (free blowing capacity a' approx. 3,500 m*/h). A roller conveyor with its own drive is located in front of the system. The pallet is loaded and unloaded manually by the customer. Initiators are used to check whether the pallet is correctly positioned on the roller conveyor. The program is started at the control panel using a switch. The loaded pallet is transported into the microwave unit and positioned using a light barrier. The doors of the microwave system are closed and the microwave exposure is switched on . After the microwave exposure time has elapsed, the door is opened and the pallet is transported onto the unloading roller conveyor. The switch-on time of the magnetrons can be preselected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Back-up fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and weight Microwave oven: (LxDxH) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior: (LxWxH) 3100 x 1200 x 1200 mm Max. permissible roller conveyor load capacity: 3000 kg Max. permissible total weight; 9000 kg Ijdpfewhvcwox An Nstk Empty weight: 6000 kg Control cabinet: (LxDxH) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolutely new condition The machine has never been in use New price €300,000 Financing through our bank is also possible. komplett-konzept.leasingo.de Further ovens in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: not inspected (used), Advanced Energy Industries Itedpownbvpjfx An Nok M/N: 3155018-000D S/N: 112480

Year of construction: 2025, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, The cleaning system utilizes the latest and most advanced technology for precise surface cleaning available on the market. The high energy efficiency and instant heat generation of the laser produce an explosive effect on the material’s surface, effectively vaporizing and removing contaminants and unwanted residues—contact-free, environmentally friendly, and efficient. Iodpfx Ajyffdken Notk Compared to traditional industrial cleaning methods, laser cleaning offers numerous advantages: it is eco-friendly, highly efficient, space-saving, flexible, and easy to operate—making it increasingly preferred by companies.

Year of construction: 2019, operating hours: 50 h, condition: excellent (used), functionality: fully functional, workpiece length (max.): 40 mm, No minimum price – guaranteed sale to the highest bidder! Unit with only 50 operating hours! The new price was €280,000! Currently, the unit is only partially operational, as it is not currently connected to the cooling system. Itsdjzmwcaepfx An Njk TECHNICAL DETAILS Component types: Screws and bolts M8 and M10 Process: Automatic inductive hardening Throughput: approx. 70–80 parts/min Processable screw length: 25 - 40 mm MACHINE DETAILS Automation and feeding Feeding: Hopper conveyor Conveying technology: Inclined conveyor Sorting: Linear sorter Singulation: Automatic Indexing table: 8-position Nests per station: 2 Quenching medium: Water Quenching water tank: Present Discharge: Magnetic discharge conveyor Demagnetization: Present Quenching medium filtration: Cartridge filter Cooling: Prepared for connection to a central cooling system RF generator manufacturer: IDEA Heating power: 50 kW Power: 67.98 hp EQUIPMENT Hopper conveyor Inclined conveyor Linear sorter 8-position indexing table with 2 nests per station IDEA RF generator Quenching water tank Magnetic discharge conveyor Demagnetization unit Cartridge filter Temperature monitoring Component height monitoring Component type monitoring Rotation monitoring Energy monitoring Ground fault monitoring Inductor flow monitoring Inductor water temperature monitoring

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. Isdpfx Ansu Nzwue Njtk At the same time, the Powerbridge is supplied with energy again. *

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Itsdpfjztrbwjx An Njk

Condition: used, Year of construction: 2023, functionality: fully functional, workpiece height (max.): 60 mm, HOLZ-HER CNC - Dowel Drilling & Insertion Machine POWER - PIN 7605 Workpiece thickness: 12 - 60 mm Workpiece width: minimum 150 mm (horizontal & vertical processing) Workpiece length: min. 60 mm, max. unlimited (limited when using positioning stops) Software: Campus V8 Power-Pin (1x license) Continuous LED strip for easy orientation and status indication Dowel insertion unit DA102 for pre-glued dowels as well as for untreated dowels when used with white glue Glue application system LS2 with electronic monitoring of the nozzle needle ECO MODE for energy-efficient operation Drilling unit BA102 (horizontal), 3-spindle MOT3 package – motorized adjustment of drilling depth 2D barcode scanner 21.5" touchscreen The POWER-PIN dowel machine is suitable both as a standard dowel machine and as an ideal addition to, for example, nesting or console machines. From cabinet furniture to premium solid wood drawers from 12 mm material thickness, the 7605 is the ideal solution for precise drilling and insertion of wooden dowels. The continuous LED strip provides constant machine status indication and assists the operator by showing the correct workpiece position for insertion. The integrated barcode scanner can be used to read DataMatrix codes, for example, which contain all machining information about the workpiece. Drill positions and drilling depths are automatically set and approached by the machine – ensuring maximum precision and efficient operation. The machine has been refurbished at the Voitsberg factory and the software has been updated to the latest version available at the time of refurbishment! Delivery, installation, and commissioning training for the machine can be arranged directly with us at an additional cost. The machine is currently located at our delivery warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb. Itsdpfx Aoyzg Dfsn Nsk

Condition: as good as new (ex-display), Year of construction: 2012, operating hours: 10 h, Kilia 65 Liter Meister Plus Vario Condition: Factory Refurbished Warranty: 6 months manufacturer's warranty Manufacturer: Kilia General Description The Kilia 65 L Meister Plus Vario is a high-performance universal cutter for the production of fine and coarse sausages, emulsions, as well as vegetarian and vegan products. The machine is made entirely of stainless steel and meets the highest hygienic and technical requirements. By using modern, energy-saving frequency converters in the drive technology, the machine enables precise control of the speeds while simultaneously reducing energy consumption – ideal for economical and sustainable production. Cutter Head Features: 6 blades Cutter Features: Infinitely adjustable blade shaft drive: Forward rotation: 50–5100 RPM Reverse rotation (mixing mode): 50–500 RPM Bowl drive: 7–20 RPM Electronic central lubrication for blade and disc shaft bearings Noise protection cover and blade cover, manually operated, stainless steel Electric blade shaft brake Temperature-dependent cut-off Speed counter cut-off Operation: Touch display with splash protection flap Operation: Button panel Drive power, blade shaft: 22 kW, 400 V (frequency converter controlled) Drive power, bowl: 1.5 kW, 400 V (frequency converter controlled) Integrated online service module for remote maintenance Iedpszcuzmefx An Njtk Dimensions and Weights Weight: 850 kg Dimensions: Diameter 1150 mm, Height 1160 mm, Height with blade cover open 1510 mm Scope of delivery Kilia 65 L Meister Plus Vario, cleaning brush, scraper Technical documentation

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. Itedjzba Nyjpfx An Nek With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, power: 0.51 kW (0.69 HP), overall weight: 45 kg, total width: 740 mm, total length: 500 mm, total height: 1,300 mm, type of input current: AC, input voltage: 230 V, volume flow: 14,000 m³/h, Rex Nordic Air Cooler REX 14000 REX14000 is our most compact, cost-effective, and energy-efficient air cooler. The cooler generates 14,000 m³/h of cooled and purified air to improve comfort for people, livestock, or premises in general. This means it cools an area of approximately 175 m². The REX14000 features an effective, integrated UVC light that kills potential germs and viruses. It has low power consumption (510W), filters and refreshes the air, and has louvers for effective distribution of the airflow, making it perfect for cooling large indoor spaces. This means powerful and environmentally friendly cooling for less than €2 per day. Easy to set up, operate, and maintain. Simply add water and enjoy cooling. The advantage of the cooler is that power is only consumed by the fan and a water pump. The actual cooling is achieved through natural evaporation. Technical specifications: Area coverage ≤ 120 m² Airflow 14,000 m³/h Water tank 60 l Speed (max.) 1,380 rpm (Variable) Voltage 230 V, 50 Hz Power consumption (max.) 510 W Weight 45 kg Dimensions (W x D x H) 74 × 50 × 130 cm The air cooler is a demonstration unit with minor signs of use. You will receive an invoice with VAT shown. Payment is made by prepayment (bank transfer) - No PayPal! Collection from the store is, of course, also possible. Isdpfxezc D Hxs An Netk The item will be shipped by freight carrier - shipping costs within Germany are €99. If you have any questions, please do not hesitate to contact us.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, TOMRA SORTING | Vibrating channel feeder Isdpozczugjfx An Notk Manufacturer: Tomra Sorting s.r.o. Model / Type: Vibrating channel Serial number: 1144-041091 Year of manufacture: 2019 Power: 2 kW Drive system: Power Grid s.r.o. Type: PG Shaker Drive Drive serial number: PG 1818-0683 Tested: 02/05/2018 Working channel dimensions: 2900 x 1950 mm Dimensions: 3000 x 2050 x 1750 mm Professional, large-scale vibrating channel feeder (commonly known as a vibratory channel) from the renowned, global leader in sorting systems and process automation – TOMRA Sorting. The device is designed for demanding tasks such as close-range transport, linear dosing, preliminary separation, and uniform distribution and feeding of a wide stream of raw material to subsequent process sections (such as optical laser sorters, X-RAY inspection systems, slicers, or IQF freezing tunnels). The machine's construction is based on a massive stainless steel / acid-resistant channel with an impressive working width of 1950 mm and a length of 2900 mm. The feeder's operation is based on inertial vibration technology, generated by a specialized, energy-efficient Power Grid Shaker Drive system with a power of 2 kW. The vibratory motion ensures that the raw material moves smoothly and inertially across the channel surface.

Condition: new, rated capacity 2,0 KW Itedpfsu Imhpex An Nsk rated current 10/6,0 Ampere output voltage 2 x 230AC / 1 x 12DC V weight of the machine ca. 29 Kg dimensions of the machine ca. 490 x 280 x 405 mm A powerful, reliable 2000 watt generator. Durable and energy efficient 80cc 4-stroke engine. Ideal for traveling with a motorhome, caravan or tent. Equipped with 2 x 230V and 1 x 12V DC output. Automatic overload protection. Only 29 kilograms (!). Easy to carry or store.

Condition: new, rated capacity 3,0 KW rated current 16/8,3 Ampere output voltage 2 x 230AC / 1 x 12DC V tank capacity 12 l engine output 7,0 PS weight of the machine ca. 45 Kg dimensions of the machine ca. 0,68 x 0,58 x 0,54 m Exhibition machine!! The Hyundai HHY3000F is a powerful and reliable 3 KW generator. A durable and energy efficient 212CC 4-stroke engine. (7 HP, type R210) reliable backup power for home, office or small workshops. 2 x 230 volt. (16A) AC output and 1 x 12 volt. (8,3A) DC output. Ijdpfx Aju Imf Uon Netk With automatic voltage regulators. (exhibition machine)

Condition: new, rated capacity 2,6/2,8 KW frequency 50 Hz output voltage 2 x 230AC / 1 x 12DC V Iedpfxsu Imnve An Netk tank capacity 15 l weight of the machine ca. 48 Kg dimensions of the machine ca. 700 x 500 x 600 mm A quiet, powerful and reliable 3200 W generator. - Mobile thanks to two smooth-running wheels. - Durable and energy-efficient 4-stroke engine with eco function. - Ideal for traveling with a camper, caravan or tent. - Equipped with LED display, 230V and 12V DC output. - Automatic protection against overload and lack of fuel. - Only 35 kilograms (!). Easy to transport and store. - Noise level: very quiet; only 59 dB (A) at a distance of 7 m. - Fuel: Euro unleaded

Condition: new, Year of construction: 2026, machine/vehicle number: 9G500208, fuel type: diesel, motor manufacturer: Caterpillar 3512B, Field of application: Construction Empty weight: 14.250 kg Generator capacity: 1.421 kVA Dimensions of cargo space: 605 x 266 x 232 cm Generator: Caterpillar SR500 Frequency: 60 Voltage: 600 Ijdpfxezhzw Do An Njtk Please contact Team DPX for more information

Year of construction: 2018, operating hours: 35,000 h, condition: used, functionality: fully functional, Description of fully automated dryer Major overhauling made by mid 2025 • The housing of the dryer is welded steel construction. The internal floor is made of perfored sheet board. The dryer has an external casing (walls and ceiling) in sandwich panel. • The dryer is driven by hydraulic power pack. • The dryer is equipped with “Ziehl Abegg”, MAXvent axial fans. It's propeller blades are made out of light casted material. One of the most energy efficient product on the market. Hot air generator is equipped with two “Geo Coil’’ heat exchangers. (fully functional but has bent fins) • The control system is equipped with a touch display for operation and visualization Isdpjxc Eitofx An Njtk of the Dryer. Remote control via PC possible. Incl. web server on the panel for the visualization of drying processes via Ethernet interface. • Working mode according to air exit temperature. The rotational speed of the fans automatically adjusted by the frequency converters so that a desired air temperature level is maintained. Includes pressure measuring devices and extension of control system. • Dryer’s heat carrier temperature approx. 85°C flow temperature and approx. 65°C return temperature. Heat carrier flow defined as 176m³/h • Drying air ventilators equipped with frequency converters • Moisture sensors at the outlet of the dryer: YES • Adjustable height of drying bed: YES • Enlarged fuel receiving bin: Yes General specifications • Infeed material: Wood chips • Size of material: G100 • Water content infeed material max. 45% • Water content outfeed material 7-10% • Designed capacity outlet approx. 1.600 kg/h • Density (wet): 300 kg/m³ • Designed drying surface approx.: 97 m² • Designed climate conditions on site: Ambient temperature 0°C; relative humidity 70%, air pressure: 990 mbar • Noise pressure level, 75 dB, (1 m distance from air inlet port) Dryer fans, installed power: 74 kW Dryer hydraulic powerpack: 15 kW

Condition: good (used), CHP natural gas, 2 pieces Onsite Energy ME3042L3 Bj 2009, Engine: MTU E3042L9 year 2016 23.000h operating hours, Generator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorber chiller: Carrier 16LJ-A24E 689KW cooling capacity Emergency cooler: Güntner GFH 090.2B/2x2-M 12m chimney, silencer, pumps, actuators, dampers, valves, gas control system Higher-level control: synchronization, load management, island operation, grid support, ec , load control cabinets Itedpfx Aeun I N Hon Njk 714KWe, thermal 1058KW, cooling 689KW

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System Iedpjzd Ufasfx An Nstk – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Itedpfx Anszi R R Ne Nok Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: used, Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: RATM 0445, fuel type: gas, color: silver, power: 132 kW (179.47 HP), output current: 270 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 400 kW (543.85 HP), continuous power (apparent): 187 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 15 units available, MTU, Leroy-Somer based ONSITE ENERGY units. 7 units worked 5 years x approx. 7000 hours yearly. 5 of those overhauled last year. 8 units worked 2 years x approx. 7000 hours yearly. 3 of those overhauled last year. All units has Leroy-Samer LSAC 47.2 S5 C6S/4 generator. Under separate agreement we can rebuild genset to diesel version. Isdpfx Aoxcvfljn Nstk Potentially Leroy-Samer LSAC 47.2 S5 C6S/4 generator can be sold separately.

Condition: used, mileage: 111,211 km, power: 90 kW (122.37 HP), Technical Specifications ID: 01242719 Manufacturer: Renault Model: Maxity Version: 120DXI First registration: 04-2019 Power: 90 kW (122 HP) Displacement: 2,488 cm³ Fuel: Diesel Color: White Number of axles: 2 Suspension: Leaf spring Tires: 195/70R15 Transmission: Manual Gross weight: 3,500 kg Mileage: 111,211 km Special Features - ABS - Radio CD - Electric windows - On-board computer - Central locking with remote control - Cruise control - Differential lock - Telephone/CB radio - Storage box - 90 L fuel tank Body Aerial work platform VT-48-NE 16m 250kg - 4 x A-frame outriggers - Telescopic boom with dual extension by hydraulic cylinder and articulating basket arm (135°) - Internal energy chain - Two-person GRP work basket 1350 x 780 x 1150 mm - Automatic basket leveling via hydraulic cylinder + parallelogram linkage on the basket arm - Overload sensor - 2 x 60° basket rotation electrically - Rear platform with aluminum chequer plate Isdpfxoxlqlxe An Njtk - One-hand joystick proportional control for hydraulic movements in the work basket - Dual controls on the vehicle with 5m extension cable - Engine start/stop from the work basket - Outrigger control from the driver’s cabin - Flashing beacons - Emergency hand pump - Working height: 16m - Lateral outreach: 7m - Operation possible without running diesel engine thanks to battery - Sine wave power inverter All functions of the lift are fully operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV and UVV certificates are included free of charge. Additional equipment such as a tow bar, lighting, shelving and more are available upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is made exclusively with original photos taken directly at our premises, ensuring full transparency regarding the actual condition of the vehicle. Our vehicles undergo thorough reconditioning in our own specialist workshop prior to sale – including mechanics, bodywork and paintwork. This means they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of custom equipment as requested For technical details, further photos, or a personal consultation, we are at your disposal at any time. All prices quoted are net prices. The contents of our website have been created with the greatest care and are regularly updated. Nevertheless, they are intended solely for general information and do not replace individual advice. Only the details in the purchase contract are binding. Subject to changes, errors, misprints and prior sale.