Used Felder Kf 700 Sp for sale (124)

Condition: as good as new (ex-display), Exhibition machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 4,000 m³/h. The extraction unit is in mint condition and has been inspected and serviced by our qualified personnel. Technical data: - H3 dust-tested Hnedpfx Adoxdkzqjdeg - Extraction connection diameter: 200 mm - Extraction can be installed on right or left side - Manual chip shaker - Steel impeller - Max. air flow: 4,000 m³/h - Minimal space required: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit Hnjdpfx Aew Axi Ajddsg 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: FBP 60, total width: 1,280 mm, total height: 1,540 mm, total length: 1,900 mm, briquette diameter: 60 mm, overall weight: 1,300 kg, oil tank capacity: 230 l, I am selling my almost new Felder FBP60 briquetting press (50-70kg) with screw gearbox, fill level sensor, and round silo, 3×400V 50Hz 9.0kW, weight 1300kg. Top condition!!!!! Purchased in September 2023. The machine is like new. For sale due to business closure. Viewing possible at any time. Hodpfxow H Dulj Addong

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, negative pressure: 2,630 Pa, volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, power: 11 kW (14.96 HP), H 3 "GS dust-tested" Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary air lock Hsdpfx Adewty Uzsdsng

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Year of manufacture: 2011 Total connected load: 7 kW Jointing milling unit: 2 x 1.1 kW 12,000 rpm Edge gluing End trimming shear End trimming saw unit Flush and radius milling unit Radius scraper blade Edge thickness: 0.4 – 3 mm Workpiece feed: 9 m/min Hnjdpow Rxfxsfx Addsg Workpiece thickness min./max.: 8–45 mm Extraction connection: 120 mm Including operating manual Dimensions: 320 x 90 x 160 cm Weight: 560 kg

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Hjdpfxoth R Tle Addong Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Hnedpsxdkw Ejfx Addsg Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Hedpfx Aovf D S Aoddsng Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: like new (used), Year of construction: 2022, The Felder Creator 950 Premium is a high-precision CNC machining center designed for the efficient and flexible production of wooden parts. Thanks to its robust design and modern technology, it enables fast and precise milling, drilling and grooving. The machine is ideal for furniture and interior design manufacturers looking for a reliable and powerful CNC solution. Technical information Machining area: X = 3500 mm, Y = 950 mm, Z = 80 mm Axis positioning speed: Depends on the selected safety system Milling spindle: 12 kW (S6) HSK F63, 24,000 rpm Safety features: CE certification, optical operation indication Hnedov I Sytepfx Addeg Power supply: 3 x 400V / 50 Hz Software: WoodFlash - CNC module, tool database, program editor Machine composition Continuous CNC center with clamp drive in the X direction and fixed gantry structure in the Y direction Automatic central lubrication Pneumatic pressure rollers for better workpiece fixation Height-adjustable work surface for optimal handling Pinning unit with precise glue dosing

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Hnedsvph Hxopfx Addjg

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, Edgebander , Felder G330 , Exelent , 2017/18 , Low working hours , Teflon Gluepot , Quck system adjustment , Flat scraping for finisin Unit , Hjdpfx Adoxz Ia Sjdjng

Condition: like new (used), Year of construction: 2023, operating hours: 1,131 h, functionality: fully functional, machine/vehicle number: 220.09.023.23, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, Edge thickness...0,4-3 (6) mm Panel thickness...8-60 mm Feed speed.. 10+18 m/min. Aggregates: Spraying unit top and bottom - Separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable application unit + 1 additional, "Easyclean" system "Glue box" system Pressure zone - 1+2 rollers, pneumatical Spraying unit - lubricating agent Guillotine for coil edge 0,4-3 mm End trimming unit 2x0,35 kW, 200 Hz, tilt-able 0-10° Trimming unit - R2+flat, 2 x 0,75 kW, 200 Hz Profile scraping unit, R2, pneumatically ON/OFF Corner rounding unit, 2 motors, servo adjustment Flat scraping unit in nesting execution, pneumatically ON/OFF Buffing unit Spraying unit top and bottom, cleaning agent Condition: Hjdpfx Aev Rlzijddsng Machine is like new, only 19 km of edge was done

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 Hedpfx Adow Hcygjdsng The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system Hsdpfx Adswa Rlkjdsng RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.

Condition: like new (used), Year of construction: 2022, The Felder profit H80 is a professional CNC machining center suitable for high-volume furniture production and other woodworking applications. The machine enables precise machining with high speed and efficiency. Thanks to its gantry design and advanced vacuum system, stable and safe machining of even the largest parts is ensured. Technical information Machining area: X = 3090 mm, Y = 2100 mm, Z = 85 mm Power transmission: Rack in X and Y axes, ball screw in Z axis Feed speed: X = 25 m/min, Y = 25 m/min, Z = 15 m/min Vacuum table: 10 vacuum fields with Smart Zoning function Milling spindle: 12 kW (S6) HSK F63, 24,000 rpm Power supply: 3 x 400V / 50 Hz Software: Compact Control - supports ISO Code and WoodFlash Extraction: Central suction nozzle with slide valve distribution Safety features: Light barrier system, optical operation indication Machine composition Robust gantry construction with double drive in X axis Hodpfjv I Sxpex Addsng Fully automated central lubrication of all os Control panel with 24" LED display and USB interface Green Line energy package for energy saving Drilling head DH 16 4H 2S – 12 vertical and 4 horizontal spindles Loading unit with lifting table for efficient handling Conveyor belt on the machine output side for smooth workpiece removal

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Hnsdpfoxly I Aex Addeg Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English)

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad Hodpfew Afd Hjx Addeng two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011

Condition: excellent (used), Year of construction: 2021, operating hours: 3 h, functionality: fully functional, Machine almost not used, like new, year of production 2021. Hnjdeudy D Tspfx Addsg Dimension of the table 220x80cm.

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm Hjdpfxew Hckrj Addong - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: like new (used), Year of construction: 2014, X-axis feed rate: 9 m/min Total length: 3,200 mm Workpiece height (max.): 45 mm Edge thickness (max.): 3 mm Height adjustment type: mechanical Input voltage: 400 V Chip removal: 2 mm Technical specifications Year of manufacture: 2014 Edge thickness: 0.4-3.0 mm Motor voltage: 3 x 400 V Motor frequency: 50 Hz Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8-45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Surface scraper: Yes Hnjdpfx Aowat Alsddsg CE-certified version Joining unit with a chip removal rate of up to 2 mm Automatic feeding of roll materials Individual feeding of strip materials Gun-type shear for rigid PVC/ABS up to 3 mm thick Glue application using Glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades, 100 mm diameter, 24 teeth Multifunctional milling unit with 2 HF motors with 0.35 kW for radius, flush, and chamfer milling for thin edges Extraction connection: 2 x 80 mm, 1 x 120 mm Max. connected load: 7.5 kW at 3 x 400 V / 50 Hz

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Hodpfx Adstt Nq Dsdsng Scoring motor format sliding table saw Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm motor power 7,35kW angle regulated fence year 2008 Hedpfxsw Ad Iwe Addeng iron cast tables

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm Hodpfeww Hhvex Addjng - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: like new (used), band width 150mm mechanical oscillation possible to sanding on pad or plane additional table for sanding unregular edges possible to work without oscillation tables tilt Hjdpfx Adet I Df Rodong year 2008