Used Film Packer for sale (1,574)

Condition: used, Year of construction: 2022, Side plates Working width 3.0 m Transport width 3.0 m Rear scraper / prism roller Ø 45 cm with rigid three-point tower Working width 2.9 m / transport width 3.0 m Tine attachment 3.0 m 3-beam, rigid, line spacing approx. 15 / cm, complete with long Hedpfx Aet Dv N Tef Tsff

Condition: used, Board packer Almab Board feed hills Board pack feed conveyors Hfsdpfx Afjymbpfe Tsf Board pack output conveyors

Condition: good (used), Year of construction: 2010, Professional packaging machine from a renowned European manufacturer. Suitable, for example, for packaging catalogs, magazines, and periodicals. The printed product is fed into the machine and detected by a sensor. It is then automatically conveyed through the machine and shrink-wrapped. The packaged product is discharged at working height via a conveyor belt. Technical Data: - Packaging output up to 1,200 products per hour. - 220-230 V / 50-60 Hz. - Forming shoulder machine. - Flat film of various thicknesses. - Transverse sealing seam / longitudinal back sealing seam. - Independent hot wire sealing bars (impulse sealing). - Electronic temperature control. - Machine mobile on castors, with locking function. Adjustment options / features on the display: - Piece and production counter. - Pressure for longitudinal sealing jaw. - Pressure for transverse sealing jaw. - Pressure for guide rollers. Hfedpfjx Nhqvox Af Tef - Sealing time. - Temperature of sealing jaws during operation. - Temperature of sealing jaws in standby. - Film slack control. - Bag length. - Cycle start. - Locking time of counter-pressure rollers after product passage. Scope of delivery includes an operating manual with circuit diagram. The machine can be demonstrated under power.

Condition: good (used), Year of construction: 2008, Professional packaging machine from a renowned European manufacturer. Suitable, for example, for packaging catalogs, magazines, and periodicals. The printed product is fed into the machine and detected by a sensor. It is then automatically conveyed through the machine and shrink-wrapped. The packaged product is discharged at working height via a conveyor belt. Technical Data: - Packaging output up to 1,200 products per hour. - 220-230 V / 50-60 Hz. - Forming shoulder machine. - Flat film of various thicknesses. - Transverse sealing seam / longitudinal back sealing seam. - Independent hot wire sealing bars (impulse sealing). - Electronic temperature control. - Machine mobile on castors, with locking function. Adjustment options / features on the display: - Piece and production counter. Hfodjx Nhbzopfx Af Tsf - Pressure for longitudinal sealing jaw. - Pressure for transverse sealing jaw. - Pressure for guide rollers. - Sealing time. - Temperature of sealing jaws during operation. - Temperature of sealing jaws in standby. - Film slack control. - Bag length. - Cycle start. - Locking time of counter-pressure rollers after product passage. Scope of delivery includes an operating manual with circuit diagram. The machine can be demonstrated under power.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, passage height: 250 mm, table width: 1,700 mm, table length: 2,000 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. Hfedpovvlyiefx Af Tsf • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Hodpfxjtuui Ds Af Tsff Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Year of construction: 2022, condition: used, Packaging machine for packing PET bottles in plastic crates. The machine is set up in a T-layout. The packing curve and cycle times are freely programmable. The machine packs 0.5 l and 1.0 l PET bottles in crates containing 20 or 9 bottles respectively. Retrofitting to other formats is possible. Additional title: Gripper head packer for packing PET bottles into beverage crates Max. capacity: 24000 bo/h referring to 0.5 l bottles Hfedpfsxykv Tsx Af Tjf Cycle time: 400 cycles/h Number of packing heads 0.5 l: 3 pcs. Number of packing heads 1.0 l: 5 pcs. Power: 13,7 kVA Voltage: 400 V Frequency: 50 Hz Compressed air: 4.5 m³/h, 6 bar, 3/8" connection Weight: 2900 kg Formats: 0.5 l and 1.0 l PET bottles; 20-bottle crates for 0.5 l (in a 4x5 arrangement); 9-bottle crates for 1.0 l (in a 3x3 arrangement) Running direction: Longitudinal run for 20-litre crates; transverse run for 9-litre crates Operation / Control: Simatic S7 Material: Base frame, attachments, control cabinet and conveyors made of stainless steel 1.4301 (AISI 304) Position: T-formation Base construction: on base frame with height-adjustable dome feet Features: Gripper head carriers, gripper heads, light barriers, bottle table, bottle guide plates, bottle completeness check, vibrators, frequency-controlled bottle transport, machine safety doors, touch panel with user guidance, control cabinet

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 2,000 mm, total height: 1,700 mm, total width: 1,700 mm, overall weight: 800 kg, Film packaging machine with shrink tunnel. The BVM Brunner Compacta 4010 is a fully automatic side-sealing packaging machine for packaging products in semi-tubular film. It seals the film on three sides and achieves up to 100 cycles per minute. The machine is particularly suitable for the book, textile, and shipping industries, processes various types of film, and can be quickly adjusted to different product sizes. Ideal for efficient and flexible packaging. Hfedswr Apfjpfx Af Tof No guarantee for technical specifications. The machine is checked and cleaned. EXW. On request, we also offer service and installation of the machine.

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control Hodopah U Tepfx Af Teff SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Condition: used, Year of construction: 2005, 6-head packer for 0.5 litre and 0.33 litre glass bottles: Krones Linapac II E35 LT1G Bottle holder: 6 x 20 or 6 x 24 bottles Additional title: Packing machine for bottle crates Performance: 50000 bottles/h Air consumption: 0,0002 m³ / bottle Power: 24,5 kW Voltage: 230/400 V Frequency: 50 Hz Hfsdpfxsxbqldo Af Tsf Length: 6160 mm Width: 4120 mm Height: 5033 mm Formats: 0.5 l glass bottle (D = 68.5 mm, H = 270 mm; Ale / Longneck), 0.33 l glass bottle (D = 61 mm, H = 238 mm; Ale / Longneck) Running direction: right -> left Operation / Control: PLC, control cabinet with touch panel Position: free standing Base construction: Square tube frame on dome feet Features: 1 basic machine (lifting mechanism, horizontal linear unit, gripper head carrier, movement axes), 2 gripper head sets (frame with 6 ring gripper heads, 20 (24) ring grippers each, pulling device, manual changing device, insertion frame, vibrator set, folding unit for completeness control, terminal strips for guide plate adjustment), shelf magazine (magazine locations with drive for automatic storage), container transport, container transport, safety device, electrical and pneumatic equipment Periphery: Buffer tables for empty and full boxes Layer patterns: 6 x 20 across, 6 x 24 across, 20 plastic crate (400 x 300 x 300 mm), 24 plastic boxes (400 x 300 x 270 mm),

Condition: used, Year of construction: 2002, Packer Manufacturer: SZA Federspiel Model: Portropack-E Year of construction: 2002 Additional title: Packing machine for bottle crates Capacity: 30000 Bottles/h Air consumption: 7 m³/h Current: 25 A Voltage: 230 / 400 V AC Compressed air: 5 bar Length: 2300 mm Width: 2800 mm Height: 2400 mm Formats: 0.33 l Vichy, 0,33 l Euro, 0.35 l lemonade, 0.5 l NRW bottles, modular crate, 8 packing heads (4x20 and 4x24) Hjdpfjw Tawzsx Af Toff Running direction: Module box in longitudinal run, from right to left Operation / Control: Simatic S7-300 / OP17 Position: free standing Base construction: Square frame construction painted on spherical feet Features: Gripper head carrier with pneumatic equipment, operating area covered with windows, container transport, pack transport, 2 gripper head sets, safety device, electrical and pneumatic equipment

Condition: used, Year of construction: 1993, Joha Crate packer Additional title: Packing machine for bottle crates Capacity approx.: 400 crates/h Hfodpfx Afew S T Nbo Tjf Power: 1,5 kW Current: 3,5 A Voltage: 400 / 230 V Position: free standing

Condition: good (used), Strech film machine Hedop T Tz Aspfx Af Tsff Brand:Nissen Type:2400 Serie no:1469 Year:1999 Techn info: Rotating plate 2400mm in diameter Max hight wrapping approx. 2000mm Total hight column 2450mm Stock no:2001830BXM

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Type: AVP 600-2 Year of construction: 2009 Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density AVP 600 specifications Hfedpfx Afoht Hkko Tef The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Hfsdpfjkn Rz Hex Af Tef Height: 1850 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Hjdpsxzuiyofx Af Tjff

Condition: excellent (used), functionality: fully functional, Technical data: Operating voltage: 400V AC Main fuse: 50A Frequency: 50Hz Connected load: 19.1kW Control voltage: 24V DC Compressed air: 6 bar Production capacity: 20 x 2m modules/h Degree of automation: fully automatic Installation dimensions: 12.5 x 5.2 x 4m (Width x Height x Depth) Stations: Decoiler: This station loads the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic tape applicator: Application of a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser cell: Creation of contact openings on the rear module edge of the product part using a laser, and inspection of correct contact opening with pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection station: Empty cell for conducting tests on test material. Transfer tape applicator cell: Application of a transfer tape to the rear module edge of the product part using an applicator. Contact strip applicator cell: Insertion of preforms (solder pads) into the opened contact openings, followed by application of a contact strip to the rear module edge of the product part using an applicator. Soldering station: Establishment of electrical contacts by soldering the preforms (solder pads) to the contact strip. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flasher station: Testing the functionality of the product part using a flasher and simultaneous contacting with pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module flasher Hfodpfx Afsxzug Sj Tef Empty cell: Currently no processing of the product part. Recoiler: This station loads the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Condition: excellent (used), Stations/Equipment: Hsdpfexzufhsx Af Teff Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment

Condition: used, AB3000, TQC, Automatic Film Applicator Model: AB3000 Condition: Used Hedpfx Afst H I Uaj Toff

Condition: good (used), Year of construction: 2015, operating hours: 5,842 h, functionality: fully functional, machine/vehicle number: 2/362594/15, input voltage: 400 V, compressed air connection: 6 bar, input current: 25 A, input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Equipment: documentation/manual, This is a "Meurer Filmline CMB 600 machine", which is no longer in use due to a change in the product range. Shrink film packaging machine with shrink tunnel FILMline CMB 600 The machine is immediately available, has no defects, and is in excellent condition. The current operating hours are 5,842 hours. The dimensions of the machine can be found in the attached document. The machine has been serviced regularly and can be inspected if required. In addition, all original operation manuals (in German and English) as well as electrical diagrams are available in duplicate as folders. Banding performance: 35 products/min Bundle capacity range: 1x5 / 1x10 Product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm Bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm Machine dimensions X/Y: approx. 3300mm / 3020mm Hsdpfxowxtktj Af Tjff A video of the running production can be provided on request.

Condition: used, Year of construction: 2004, Used Case Packer Mas Pack 2004 Used Case Packer Model Accupack 3/6 from 2004 Hsdpfx Afjvgul No Tjff Packs 6 boxes of 6 bottles and 3 boxes of 12 bottles at a time Mechanical head unit movement Variable bottle gripping head for various bottle diameters Variable production speed with inverter Painted iron machine With safety features 10 formats of centerers x cartons Year of construction 2004 Production around 13,000 bottles/hour Machine in perfect working condition Used Case Packer Mas Pack year 2004. This machine is in excellent condition and is ready immediately for sale.

Condition: used, Year of construction: 2009, Used Acmi Case Packer 2009 Used Case Packing machine, manufactured by ACMI in 2009 complete with safeguards and user manuals. It reaches speeds of up to 8000 bottles an hour. Currently kept in storage. Hjdpfx Aevgurpef Toff Machinery kept in excellent condition and ready for sale.

Condition: used, Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph This Used Case Packer  delivers high efficiency and, therefore, meets the demands of large-scale bottling operations. Mondo & Scaglione manufactured this machine, which remains in storage, ready for reinstallation and immediate use in production plants. Its technical specifications and safety features, as a result, ensure reliable and automated packaging. Technical Specifications of the Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph The Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph reaches operational speeds of up to 10000 bottles per hour (BPH). Consequently, this performance makes it perfect for high-volume production lines, where maintaining speed and operational continuity is crucial for efficient output. The machine includes 18 fixed heads, which ensure steady and consistent performance throughout the packaging process. It supports a 3 x 2 packaging format, which, in turn, optimizes packing bottles or containers into six-unit boxes. In addition, this format is highly adaptable to various production needs. Structure and Dimensions The machine’s dimensions—2900 mm in length, 1900 mm in width, and 2300 mm in height—allow easy installation in industrial spaces that meet safety standards. Moreover, the operator side sits on the right, facilitating manual intervention and streamlining maintenance tasks. As such, these features make the Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph user-friendly during control and monitoring. Furthermore, its compact design ensures that it fits within existing production lines without significant adjustments. Safety and Reliability This Case Packer  integrates a range of safety features that minimize operational risks. Physical protections and safety sensors actively ensure operator safety during operation. Therefore, these systems comply with industrial safety regulations, reducing the likelihood of accidents and ensuring uninterrupted production. Additionally, this attention to safety ensures the machine operates at optimal performance levels over time. Current Condition The Used Case Packer MONDO & SCAGLIONE MI 2/3 up to 10000 bph currently sits in storage, kept under optimal conditions, and remains ready for reinstallation in a production line. Before being activated, a thorough inspection will ensure that all components perform perfectly, particularly after any period of inactivity. As a result, this machine will integrate seamlessly into a new production environment with minimal downtime. Moreover, regular maintenance checks can further guarantee long-term operational efficiency. Applications and Usage This machine fits perfectly in plants requiring high automation levels and large-scale packaging capacity. The 3 x 2 format, combined with its 18 fixed heads, allows efficient packaging of bottles of various sizes and materials into six-unit boxes. Hedpfx Afevgvi Ns Tjff

Condition: used, Year of construction: 2006, operating hours: 6,800 h, Used Dimac Planet 45 WrapAround Packer 2006 This wrap around packer was produced by Dimac in 2006, and it is the model Planet 45. The machine is still in production with 6728 working hours. This used wraparound Dimac produces 45 packs per hour and processes various formats including bottles and cans. It has various spare parts available upon request. It is complete with user manuals and safety features in accordance with the law. The used Dimac Planet 48 Wrap Around Packer 2006 is in excellent condition and ready for sale. Technical specification: The Used Dimac Planet 45 WrapAround Packer has straight inlet with a bottle sorter at the inlet. We have 22 formats available inserted into the machine. The operator side is on the right side of the you want it can also be changed without any particular problems. If you need ribbons we can also sell those separately; You just need to have a layout to check their feasibility, we have many ribbons available. Dimac used wraparound overhaul services: We also provide assistance and maintenance services for used wraparound Dimac and Robopack machinery in general automation of the Athena group company. We carry out disassembly and assembly with our technical team anywhere in the world. In the case of overhauls, the delivery time is only affected by the delivery of the electrical parts. We also carry out audits in your company, it is necessary to first carry out an inspection to verify its feasibility. In the case of this machine which has a few working hours, delivery is immediate as it is in excellent condition. Contact us for a quote or an inspection, we can move, disassemble, reassemble entire bottling plants. Hfjdpfovgvy Iox Af Tjf We carry out an inspection by our staff or through your layout and video/photos of your system.    

Condition: used, Year of construction: 1999, Used Case Packer Ape Inca 2001 Pack 2 Cartons Of 12 or 4 Cartons Of 6 Bottles Each Bar Movement Of The Mechanical Head Group The bottle gripping head is variable for various bottle diameters Variable Production Speed With Inverter Hodpfx Ajvguinof Tjff Machine With Stainless Steel Frame And Fairing Used packer APE with Accident Prevention Protections Year Of Construction 1999 Production 8,000 bots. Now in 12 And 6 Cartons Used packer APE In Good Condition Machine in the state in which it is found working With Existing Formats Some specification: Used case packer APE Inca 2001 entirely in stainless steel, a machine of minimum encumbrance in terms of space and very mechanical, easy to use and very efficient for the type of work it is called upon to perform. The bottle inlet can be straight or angled 90 degrees with a motorized bend, so it can be adapted to any layout. the spare parts are easily available, the electronics are minimal and therefore also easily repairable in case of breakdowns. Used case packer APE Inca 2001 is a very appropriate model of the Veronese company, it combines quality, price and performance. On request, it is also possible to create various other bottle formats. Used packer APE disassembled perfectly functional and salable with pre-installation check to be done in our workshops. About installation: Thanks to our staff we are able to offer all the installation and start-up services of the machinery; in this case, we carry out a project together with the buyer to prepare for the arrival of the used machinery in his used bottling line. We can also prepare all the electrical connections to insert the used machinery into the existing automation. We include this project in the pre-installation machine service and it is designed to relieve the customer of any worries.