Used Fume Cupboard for sale (457)

Condition: used, Laboratory fume cupboard, fume cupboard, suction -Input: 230 volts AC Iasdpfx Agjb Uhkhj Usu -Dimensions: 1200/875/H1255 mm -Weight: 176 kg

Condition: good (used), mobile welding fume filters, welding fume extraction Iasdpfx Ageb A Ng Is Uou -portable -Extraction port: 1 -Drive: 1 kW -Volume flow rate: max. 170 m³/h -Quantity: 1 available -Weight: 20 kg

Condition: good (used), Manufacturer: Fume Extractor Filter top: 280 x 280 x 20 mm Filter center: 270 x 270 x 230 mm Filter bottom: 280 x 280 x 30 mm Filter chamber: 360 x 360 x 270 mm Spigot diameter: 45 mm Performance: Connection: Accessories/equipment: mobile Condition: good Iajdpfx Agsduiu Se Ueu weight: 0,1 t dimensions: 400 x 630 x 750 mm

Condition: good (used), Year of construction: 2014, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, small dust collectors -Manufacturer: TEKA, mobile welding fume extraction system type Strongmaster IFA -Drive: 1.1 kW -Volume flow rate: 3000 m³/h -Extraction arm: Ø 160 mm x 4000 mm Iodpfjzblywox Ag Ueau -Transport dimensions: 950/670/H1365 mm -Weight: 196 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Iodpfx Agjdqzbro Ujau Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Iaedpsdqzcvjfx Ag Ueu Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Filter-area: 228m2 Capacity: 15.000 m3/h - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 - Control type: Herding MP 12 - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iodewrr Htopfx Ag Uoau Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop Iaedpfx Agoyhxl Ro Ueu

Condition: used, ULT JUMBO Filter Trolley 2.0 Fume extraction system from IVH. Originated from a cleanroom production environment. Iajdpfszcvtwex Ag Uou ult.de/ia/mobile-absaugung-jumbo-filtertrolley

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Iajdezdqv Uspfx Ag Ueu Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: used, Extraction system complete with KEMPER brand extraction arms. Extraction arms are used in areas where work processes generate harmful dusts and fumes that negatively impact the health of workers and other people in the vicinity. Extraction arms are one of the most effective systems for capturing welding fumes, as well as fumes, dusts, or vapors from other manufacturing processes. The set includes: * 4 extraction arms with a wall mount, 160mm in diameter and 2.00m in length * Pipe, diameter 250mm - 8m Iasdpfx Ajzdir Dog Usu * Pipe, diameter 350mm - 8.5m * 350mm tee fitting * 250mm elbow - 3 pieces

Condition: used, Technical details: Number of drawer: 2 taper: SK40 weight: 362 kg Iasdpfxou Nkzpo Ag Uju dimensions L x W x H: 0,42 x 0,69 x 0,51 m Very well maintained tool trolley made of pipe construction, screwed with tools (comparable with the pictures) *

Condition: used, Year of construction: 2012, Technical details: Number of drawer: 48 Shelf width: 160 shelf length: 600 shelf height: 60 mm electrical connection: 230V / 50Hz / 16A V / Hz. dimensions L x W x H: 0,8 x 0,72 x 1,7 m Tool dispensing system - Warehouse management system Selection through automatic processes Electronic access to definable drawers via warehouse management software -Optimized storage and management of tools Storage above the drawers, rubberized, WxD: 720 x 190mm Equipment: Computer HP pro monitor and input device Hand scanner * Iedpfxou Nkz Ae Ag Ujau

Condition: used, Year of construction: 1995, Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Iedpfx Aozb Dx Esg Ueau Depth: 500 mm Total height: 1300 mm

Condition: used, Welding Fumes Extractor SAF AZUR Voltage: 220 V mono Width: 800 mm Depth: 1200 mm Total height: 1200 mm Tubing height: 2000 mm Iajdpjzb Dtvefx Ag Uou

Condition: used, This listing is for the Bigneat Chemcap Ductless Fume Cabinet The unit is in full working condition and is ready for immediate use The Bigneat Chemcap Ductless Fume Cabinet is a recirculating fume hood designed to protect laboratory users from hazardous fumes, vapours, gases and particulates without the need for external ductwork. Instead of venting contaminated air outside a building, it draws air into the cabinet, filters it, and then returns clean air back into the room. This makes it ideal where installing conventional ducted extraction would be difficult, costly or disruptive. Filtration & Safety Ijdpeyliq Isfx Ag Ueau Chemcap™ carbon filtration: specialised carbon media to capture a wide range of chemical vapours. Optional HEPA filtration: for removing particulates as well as gases (available on some models). Recirculatory operation: cleans and returns air to the room, eliminating hazardous external emissions and reducing energy loss Usability & Convenience Benchtop or stand-mounted: sits on a lab bench or on dedicated support furniture. Portable and easy to install: no need for building ductwork. Clear acrylic panels: offer all-round visibility of the workspace. Touch-button controls with a service-due indicator. Quiet operation (~

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Iaodpfx Asxf Up Ieg Uou

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Iajdpjy N Duqjfx Ag Uou Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Year of construction: 2009, filter area: 80 m², suction capacity: 8,000 m³/h, DANTHERM dust extractor, welding fume extraction, automatic self-cleaning cartridge filter, pneumatic, vacuum type for plasma cutting, laser, sandblasting, soda blasting, shot blasting, plastics and catalytic converters, mineral processes, and all types of dry dust. Ijdsyq Nygjpfx Ag Usau The filter is cleaned pneumatically with compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing explosion risk. Fan power: 11 kW with frequency inverter. Airflow capacity: 8,000 m³/h – 10,000 m³/h Filtration surface area: 80 m² Inlet diameter: 250 mm Stock no.: 1090

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Isdpfx Agjx Da Tij Uoau Collection by buyer. Assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors Iaedpfox Hvqfsx Ag Uju -Manufacturer: Kemper, filter unit for mobile welding fume extraction -Type: 63100 -Drive: 1.6 kW -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: used, 9 St. ca. 750 x710x1020 mm weight 180 kg Colour 6011 RAL Large drawer usable space ...x... mm Full extension drawer runners (VA) 100% 2 drawers with internal height 30 mm 2 drawers with internal height 55 mm, 2 drawers with internal height 80 mm, 2 drawers with internal height 130 mm Iaodpfxsy A Tb To Ag Uju Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer TÜV GS tested Drawers flush with cabinet, recessed handles

Condition: good (used), Storage location: 3108 Manufacturer: TEKA Year of manufacture: 2012 Operating hours: 5,618 h Type: Strongmaster IFA Serial number: 6907210061062 Airflow rate: 3,000 m³/h Outrigger length (approx.): 3,000 mm Features: mobile Accessories: new filter insert Connection: 1.1 kW, 400 V Ijdpfxey T Uxns Ag Usau Weight: 160 kg Dimensions: 800 x 800 x 1,500 mm (without hose) Hose length: approx. 4,000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms Iaodpfxouud Ire Ag Uou 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Iodpfx Asy T Iyrsg Ujau Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120